Citations (78)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Katherine Ramos & Karel Matouš. (2018) Micro-computed tomography based experimental investigation of micro- and macro-mechanical response of particulate composites with void growth. Philosophical Magazine 98:34, pages 3049-3071.
Read now
Read now
E. Maire & P. J. Withers. (2014) Quantitative X-ray tomography. International Materials Reviews 59:1, pages 1-43.
Read now
Read now
Vamsi Krishna Balla, Susmita Bose & Amit Bandyopadhyay. (2010) Understanding compressive deformation in porous titanium. Philosophical Magazine 90:22, pages 3081-3094.
Read now
Read now
S. R. Stock. (2008) Recent advances in X-ray microtomography applied to materials. International Materials Reviews 53:3, pages 129-181.
Read now
Read now
B. J. Connolly, D. A. Horner, S. J. Fox, A. J. Davenport, C. Padovani, S. Zhou, A. Turnbull, M. Preuss, N. P. Stevens, T. J. Marrow, J.-Y. Buffiere, E. Boller, A. Groso & M. Stampanoni. (2006) X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking. Materials Science and Technology 22:9, pages 1076-1085.
Read now
Read now
Articles from other publishers (73)
E. Laçaj, P. Doumalin, J. Bouyer, P. Jolly, Y. Henry, A. Fatu, A. Beaudoin, A.-E. Ennazii, B. Couderc & A. King. (2023) 4D local investigation of mechanical behavior of open-cell foams by enhanced morphological analysis and microstructure-adapted digital volume correlation for tribology applications. Mechanics of Materials 187, pages 104836.
Crossref
Crossref
Sasan Rezaee, Houshang Araghi, Houshyar Noshad & Zabiholah Zabihi. (2023) Physical characteristics of nickel thin-films and nickel thin-film foams as Li-air batteries anode and cathode current collectors. Journal of Molecular Liquids 383, pages 122171.
Crossref
Crossref
Maxime Wetta, Jean-Benoit Kopp, Louise Le Barbenchon & Philippe Viot. (2023) A thick cellular structural adhesive: Identification of its behavior under shear loading. Materialia, pages 101782.
Crossref
Crossref
Jae-Hyung Cho, Jong-Joo Rha, Geon-Young Lee, Hansol Jeon & Ju-Young Kim. (2023) Microstructure and mechanical properties of open-cell Ni-foams with hollow struts and NiO oxide layers. Materials Science and Engineering: A 863, pages 144519.
Crossref
Crossref
Alexandr Kornievsky & Andrey Nasedkin. 2023. Physics and Mechanics of New Materials and Their Applications. Physics and Mechanics of New Materials and Their Applications
276
289
.
Jae-Hyeong Yu, Kyu-Seok Jung, Mohanraj Murugesan, Wan-Jin Chung & Chang-Whan Lee. (2022) Study on the Incremental sheet metal forming process using a metal foam as a die. International Journal of Material Forming 15:6.
Crossref
Crossref
Deepak Panda & Kodanda Ram Mangipudi. (2022) The role of network topology on the uniaxial tensile behaviour of low density random open cellular structures. Materialia 22, pages 101396.
Crossref
Crossref
Alexandr S. Kornievsky & Andrey V. Nasedkin. 2022. Advanced Materials Modelling for Mechanical, Medical and Biological Applications. Advanced Materials Modelling for Mechanical, Medical and Biological Applications
251
269
.
Jun Ho Lee, Geon Young Lee, Jong-joo Rha, Ji Hoon Kim & Jae-Hyung Cho. (2021) Analysis of Microstructure Evolution and Mechanical Properties during Compression of Open-Cell Ni-Foams with Hollow Struts Using Micro-CT and FEM. Materials 15:1, pages 124.
Crossref
Crossref
Iman Mohammed, Ricardo Bernhardt, Markus Schubert & Uwe Hampel. (2021) Non-invasive morphological characterization of cellular loofa sponges using digital microscopy and micro-CT. International Journal of Chemical Reactor Engineering 19:10, pages 1057-1073.
Crossref
Crossref
M. Fesahat, H. Vafaeenezhad, M.H. Esnaashary, A. Yazdi, F. Hosseinabadi & M. Soltanieh. (2021) A micromechanical approach to deformation and damage of nickel foam used in conductive layer of lithium-ion battery. Materials Science and Engineering: A 825, pages 141895.
Crossref
Crossref
Balaji Vengatachalam, Rong Huang, Leong Hien Poh, Zishun Liu, Qinghua Qin & Somsak Swaddiwudhipong. (2021) Initial yield behaviour of closed-cell aluminium foams in biaxial loading. International Journal of Mechanical Sciences 191, pages 106063.
Crossref
Crossref
Haithem Louati, Tobias Scheuermann, Bernhard Maschke, Marie-Line Zanota, Jerome Vicente, Paul Kotyczka & Isabelle Pitault. (2020) Network‐Based Modeling of Transport Phenomena in Solid and Fluid Phases of Open‐Cell Foams: Construction of Graphs. Advanced Engineering Materials 22:5, pages 1901468.
Crossref
Crossref
Claudia Richert, Anton Odermatt & Norbert Huber. (2019) Computation of Thickness and Mechanical Properties of Interconnected Structures: Accuracy, Deviations, and Approaches for Correction. Frontiers in Materials 6.
Crossref
Crossref
Sukyung Lee, Jason Tam, Weiwei Li, Bosco Yu, Hai Jun Cho, Javad Samei, David S. Wilkinson, Heeman Choe & Uwe Erb. (2019) Multi-scale morphological characterization of Ni foams with directional pores. Materials Characterization 158, pages 109939.
Crossref
Crossref
S. Koumlis & L. Lamberson. (2019) Strain Rate Dependent Compressive Response of Open Cell Polyurethane Foam. Experimental Mechanics 59:7, pages 1087-1103.
Crossref
Crossref
M.G. Tarantino, O. Zerhouni & K. Danas. (2019) Random 3D-printed isotropic composites with high volume fraction of pore-like polydisperse inclusions and near-optimal elastic stiffness. Acta Materialia 175, pages 331-340.
Crossref
Crossref
Louise Le Barbenchon, Jérémie Girardot, Jean-Benoît Kopp & Philippe Viot. (2019) Multi-scale foam : 3D structure/compressive behaviour relationship of agglomerated cork. Materialia 5, pages 100219.
Crossref
Crossref
Wenqi Zhu, Nawfal Blal, Salvatore Cunsolo, Dominique Baillis & Paul-Marie Michaud. (2018) Effective Elastic Behavior of Irregular Closed-Cell Foams. Materials 11:11, pages 2100.
Crossref
Crossref
Lei Zhang & Shaogang Wang. (2018) Correlation of Materials Property and Performance with Internal Structures Evolvement Revealed by Laboratory X-ray Tomography. Materials 11:10, pages 1795.
Crossref
Crossref
Wenqi Zhu, Nawfal Blal, Salvatore Cunsolo & Dominique Baillis. (2018) Effective elastic properties of periodic irregular open-cell foams. International Journal of Solids and Structures 143, pages 155-166.
Crossref
Crossref
Maryam Tabatabaei & Satya N. Atluri. (2017) Simple and efficient analyses of micro-architected cellular elastic-plastic materials with tubular members. International Journal of Plasticity 99, pages 186-220.
Crossref
Crossref
Mauro Bracconi, Matteo Ambrosetti, Matteo Maestri, Gianpiero Groppi & Enrico Tronconi. (2017) A systematic procedure for the virtual reconstruction of open-cell foams. Chemical Engineering Journal 315, pages 608-620.
Crossref
Crossref
F. De Pascalis, M. Nacucchi, M. Scatto & R. Albertoni. (2016) Quantitative characterisation of low-density, high performance polymeric foams using high resolution X-ray computed tomography and laser confocal microscopy. NDT & E International 83, pages 123-133.
Crossref
Crossref
K.R. Mangipudi, E. Epler & C.A. Volkert. (2016) Topology-dependent scaling laws for the stiffness and strength of nanoporous gold. Acta Materialia 119, pages 115-122.
Crossref
Crossref
M. Nacucchi, F. De Pascalis, M. Scatto, L. Capodieci & R. Albertoni. Structural analysis of advanced polymeric foams by means of high resolution X-ray computed tomography. Structural analysis of advanced polymeric foams by means of high resolution X-ray computed tomography.
Jaona Randrianalisoa, Dominique Baillis, Christophe L. Martin & Rémy Dendievel. (2015) Microstructure effects on thermal conductivity of open-cell foams generated from the Laguerre–Voronoï tessellation method. International Journal of Thermal Sciences 98, pages 277-286.
Crossref
Crossref
John Russ & F Neal. 2015. The Image Processing Handbook, Seventh Edition. The Image Processing Handbook, Seventh Edition
957
1011
.
John C. Russ. (2015) Image Analysis of Foods. Journal of Food Science 80:9, pages E1974-E1987.
Crossref
Crossref
Carla Beckmann & Jörg Hohe. (2014) Numerical prediction of disorder effects in solid foams using a probabilistic homogenization scheme. Mechanics of Materials 78, pages 22-43.
Crossref
Crossref
Luc Salvo, Guilhem Martin, Mathieu Suard, Ariane Marmottant, Rémy Dendievel & Jean-Jacques Blandin. (2014) Processing and structures of solids foams. Comptes Rendus Physique 15:8-9, pages 662-673.
Crossref
Crossref
Simon Zabler. (2014) General introduction: Liquid and solid (materials, main properties and applications …). Comptes Rendus Physique 15:8-9, pages 653-661.
Crossref
Crossref
Anthony Burteau, Jean-Dominique Bartout, Yves Bienvenu & Samuel Forest. (2014) On the creep deformation of nickel foams under compression. Comptes Rendus Physique 15:8-9, pages 705-718.
Crossref
Crossref
Jaona Randrianalisoa & Dominique Baillis. (2014) Thermal conductive and radiative properties of solid foams: Traditional and recent advanced modelling approaches. Comptes Rendus Physique 15:8-9, pages 683-695.
Crossref
Crossref
I.K. Mohammed, M.N. Charalambides, J.G. Williams & J. Rasburn. (2014) Modelling the microstructural evolution and fracture of a brittle confectionery wafer in compression. Innovative Food Science & Emerging Technologies 24, pages 48-60.
Crossref
Crossref
Miguel A.A. Mendes, Prabal Talukdar, Subhashis Ray & Dimosthenis Trimis. (2014) Detailed and simplified models for evaluation of effective thermal conductivity of open-cell porous foams at high temperatures in presence of thermal radiation. International Journal of Heat and Mass Transfer 68, pages 612-624.
Crossref
Crossref
Russell Goodall & Andreas Mortensen. 2014. Physical Metallurgy. Physical Metallurgy
2399
2595
.
Haiyang Yu, Kee Pah Lim, Sijing Xiong, Lay Poh Tan & Winston Shim. (2013) Functional Morphometric Analysis in Cellular Behaviors: Shape and Size Matter. Advanced Healthcare Materials 2:9, pages 1188-1197.
Crossref
Crossref
. 2013. Stochastic Geometry and its Applications. Stochastic Geometry and its Applications
453
505
.
Laurent Babout, Krzysztof Grudzien, Eric Maire & Philip J. Withers. (2013) Influence of wall roughness and packing density on stagnant zone formation during funnel flow discharge from a silo: An X-ray imaging study. Chemical Engineering Science 97, pages 210-224.
Crossref
Crossref
Sid Ali KaouaHaddad MeriemDahmoun DjaffarAzzaz Mohammed. (2013) Numerical Modelling of Metal Foams with Weaire-Phelan Cell. Defect and Diffusion Forum 334-335, pages 122-126.
Crossref
Crossref
Kaoua Sid-AliHaddad MeriemDjaffar DahmounAzzaz Mohammed. (2013) The Metal Foams Modelling with Anisotropic Cells. Applied Mechanics and Materials 291-294, pages 2754-2757.
Crossref
Crossref
Yoshihiko Hangai, Kazuya Takahashi, Ryo Yamaguchi, Takao Utsunomiya, Soichiro Kitahara, Osamu Kuwazuru & Nobuhiro Yoshikawa. (2012) Nondestructive observation of pore structure deformation behavior of functionally graded aluminum foam by X-ray computed tomography. Materials Science and Engineering: A 556, pages 678-684.
Crossref
Crossref
A. Burteau, F. N’Guyen, J.D. Bartout, S. Forest, Y. Bienvenu, S. Saberi & D. Naumann. (2012) Impact of material processing and deformation on cell morphology and mechanical behavior of polyurethane and nickel foams. International Journal of Solids and Structures 49:19-20, pages 2714-2732.
Crossref
Crossref
Camille C. Besse & Dirk Mohr. (2012) Plasticity of formable all-metal sandwich sheets: Virtual experiments and constitutive modeling. International Journal of Solids and Structures 49:19-20, pages 2863-2880.
Crossref
Crossref
Eric Maire. (2012) X-Ray Tomography Applied to the Characterization of Highly Porous Materials. Annual Review of Materials Research 42:1, pages 163-178.
Crossref
Crossref
Michał Grdeń, Mohammad Alsabet & Gregory Jerkiewicz. (2012) Surface Science and Electrochemical Analysis of Nickel Foams. ACS Applied Materials & Interfaces 4:6, pages 3012-3021.
Crossref
Crossref
D. Tsarouchas & A.E. Markaki. (2011) Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model. Acta Materialia 59:18, pages 6989-7002.
Crossref
Crossref
K.R. Mangipudi & P.R. Onck. (2011) Multiscale modelling of damage and failure in two-dimensional metallic foams. Journal of the Mechanics and Physics of Solids 59:7, pages 1437-1461.
Crossref
Crossref
S.V. Raj. (2011) Microstructural characterization of metal foams: An examination of the applicability of the theoretical models for modeling foams. Materials Science and Engineering: A 528:15, pages 5289-5295.
Crossref
Crossref
Amer Inayat, Hannsjörg Freund, Thomas Zeiser & Wilhelm Schwieger. (2011) Determining the specific surface area of ceramic foams: The tetrakaidecahedra model revisited. Chemical Engineering Science 66:6, pages 1179-1188.
Crossref
Crossref
E. Combaz & A. Mortensen. (2010) Fracture toughness of Al replicated foam. Acta Materialia 58:14, pages 4590-4603.
Crossref
Crossref
R. Singh, P.D. Lee, T.C. Lindley, C. Kohlhauser, C. Hellmich, M. Bram, T. Imwinkelried & R.J. Dashwood. (2010) Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling. Acta Biomaterialia 6:6, pages 2342-2351.
Crossref
Crossref
A. Kaemmerlen, C. Vo, F. Asllanaj, G. Jeandel & D. Baillis. (2010) Radiative properties of extruded polystyrene foams: Predictive model and experimental results. Journal of Quantitative Spectroscopy and Radiative Transfer 111:6, pages 865-877.
Crossref
Crossref
G. Incera Garrido & B. Kraushaar-Czarnetzki. (2010) A general correlation for mass transfer in isotropic and anisotropic solid foams. Chemical Engineering Science 65:6, pages 2255-2257.
Crossref
Crossref
Thomas Daxner. 2010. Cellular and Porous Materials in Structures and Processes. Cellular and Porous Materials in Structures and Processes
47
106
.
Julia Grosse, Benjamin Dietrich, Gerardo Incera Garrido, Peter Habisreuther, Nikolaos Zarzalis, Holger Martin, Matthias Kind & Bettina Kraushaar-Czarnetzki. (2009) Morphological Characterization of Ceramic Sponges for Applications in Chemical Engineering. Industrial & Engineering Chemistry Research 48:23, pages 10395-10401.
Crossref
Crossref
Ping Liu, Guo He & Luhai Wu. (2009) Uniaxial tensile stress–strain behavior of entangled steel wire material. Materials Science and Engineering: A 509:1-2, pages 69-75.
Crossref
Crossref
J.L. Fife, J.C. Li, D.C. Dunand & P.W. Voorhees. (2011) Morphological analysis of pores in directionally freeze-cast titanium foams. Journal of Materials Research 24:1, pages 117-124.
Crossref
Crossref
M. Duchamp, J. D. Bartout, S. Forest, Y. Bienvenu, G. Walther, S. Saberi & A. Boehm. 2009. IUTAM Symposium on Mechanical Properties of Cellular Materials. IUTAM Symposium on Mechanical Properties of Cellular Materials
51
67
.
Stuart Stock. 2008. MicroComputed Tomography. MicroComputed Tomography
171
213
.
N. Michailidis, F. Stergioudi, H. Omar & D. N. Tsipas. (2009) Investigation of the Mechanical Behavior of Open‐Cell Ni Foams by Experimental and FEM Procedures. Advanced Engineering Materials 10:12, pages 1122-1126.
Crossref
Crossref
E. Amsterdam, R. Goodall, A. Mortensen, P.R. Onck & J.Th.M. De Hosson. (2008) Fracture behavior of low-density replicated aluminum alloy foams. Materials Science and Engineering: A 496:1-2, pages 376-382.
Crossref
Crossref
E. Amsterdam, H. van Hoorn, J. Th. M. De Hosson & P. R. Onck. (2008) The Influence of Cell Shape Anisotropy on the Tensile Behavior of Open Cell Aluminum Foam. Advanced Engineering Materials 10:9, pages 877-881.
Crossref
Crossref
M. Loretz, E. Maire & D. Baillis. (2008) Analytical Modelling of the Radiative Properties of Metallic Foams: Contribution of X-Ray Tomography. Advanced Engineering Materials 10:4, pages 352-360.
Crossref
Crossref
E. Amsterdam, J.H.B. de Vries, J.Th.M. De Hosson & P.R. Onck. (2008) The influence of strain-induced damage on the mechanical response of open-cell aluminum foam. Acta Materialia 56:3, pages 609-618.
Crossref
Crossref
Russell Goodall, Ariane Marmottant, Luc Salvo & Andreas Mortensen. (2007) Spherical pore replicated microcellular aluminium: Processing and influence on properties. Materials Science and Engineering: A 465:1-2, pages 124-135.
Crossref
Crossref
Thomas Daxner, Robert D. Bitsche & Helmut J. Böhm. (2007) Micromechanical Models of Metallic Sponges with Hollow Struts. Materials Science Forum 539-543, pages 1857-1862.
Crossref
Crossref
Samuel Forest & Rainer Sievert. (2006) Nonlinear microstrain theories. International Journal of Solids and Structures 43:24, pages 7224-7245.
Crossref
Crossref
A Kim, K Tunvir, G D Jeong & S S Cheon. (2006) A multi-cell FE-model for compressive behaviour analysis of heterogeneous Al-alloy foam. Modelling and Simulation in Materials Science and Engineering 14:6, pages 933-945.
Crossref
Crossref
S. A. MCDONALD, P. M. MUMMERY, G. JOHNSON & P. J. WITHERS. (2006) Characterization of the three-dimensional structure of a metallic foam during compressive deformation. Journal of Microscopy 223:2, pages 150-158.
Crossref
Crossref
T. Dillard, S. Forest & P. Ienny. (2006) Micromorphic continuum modelling of the deformation and fracture behaviour of nickel foams. European Journal of Mechanics - A/Solids 25:3, pages 526-549.
Crossref
Crossref
A.-H. Benouali, L. Froyen, T. Dillard, S. Forest & F. N’guyen. (2005) Investigation on the influence of cell shape anisotropy on the mechanical performance of closed cell aluminium foams using micro-computed tomography. Journal of Materials Science 40:22, pages 5801-5811.
Crossref
Crossref