Citations (97)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (6)
M. Reihanian, M.A. Bavi & Khalil Ranjbar. (2022) CNT-reinforced Al-xZr (x = 0.25, 0.5 and 1 wt.%) surface composites fabricated by friction stir processing: microstructural, mechanical and wear characterisation. Philosophical Magazine 102:11, pages 1011-1041.
Read now
Read now
Gul Tosun, Latif Ozler & Mehmet Erbil Ozcan. (2020) Gradient composite coatings on AA5754 using friction stir process. Surface Engineering 36:5, pages 447-455.
Read now
Read now
Ashwin Kumar Godasu, Atul Kumar & Suhrit Mula. (2020) Influence of cryocooling on friction stir processing of Al-5083 alloy. Materials and Manufacturing Processes 35:2, pages 202-213.
Read now
Read now
Vivek Patel, Wenya Li, Achilles Vairis & Vishvesh Badheka. (2019) Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement. Critical Reviews in Solid State and Materials Sciences 44:5, pages 378-426.
Read now
Read now
Z. Y. Ma, A. H. Feng, D. L. Chen & J. Shen. (2018) Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties. Critical Reviews in Solid State and Materials Sciences 43:4, pages 269-333.
Read now
Read now
D Yadav & R Bauri. (2011) Microstructural characterisation of friction stir processed aluminium. Materials Science and Technology 27:7, pages 1163-1169.
Read now
Read now
Articles from other publishers (91)
Danial Zangene, Fuad Kayvandarian, Farzad Khodabakhshi, Mehdi Malekan & Zuzana Hájovská. (2024) Nickel-aluminum bronze (NAB) alloy design under two-steps casting and submerged friction stir processing. Materials Science and Engineering: A 890, pages 145960.
Crossref
Crossref
Uceu F.H. Suhuddin, Lars Rath, Ricardo M. Halak & Benjamin Klusemann. (2023) Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion. Materials Characterization 205, pages 113252.
Crossref
Crossref
Mohammad Reza Akbarpour, Homayoun Mousa Mirabad, Farid Gazani, Iman Khezri, Amirhossein Ahmadi Chadegani, Ali Moeini & Hyoung Seop Kim. (2023) An overview of friction stir processing of Cu–SiC composites: Microstructural, mechanical, tribological, and electrical properties. Journal of Materials Research and Technology 27, pages 1317-1349.
Crossref
Crossref
Sandeep Jain, Mahesh Patel, Jayaprakash Murugesan & Sumanta Samal. (2023) Influence of Friction Stir Processing on Novel Designed Aluminium-Based Alloy to Enhance Strength and Ductility. Arabian Journal for Science and Engineering.
Crossref
Crossref
Aniruddha Malakar, Vivek Pancholi & K. S. Suresh. (2023) Grain Boundary and Texture Evolution during Severe Plastic Deformation of Green Al Powder Compacts. Journal of Materials Engineering and Performance.
Crossref
Crossref
R. Raja, Ragavanantham Shanmugam, Sabitha Jannet, G. B. Veeresh Kumar, N. Venkateshwaran, K. Naresh & Monsuru Ramoni. (2023) Development of Al-Mg2Si Alloy Hybrid Surface Composites by Friction Stir Processing: Mechanical, Wear, and Microstructure Evaluation. Materials 16:11, pages 4131.
Crossref
Crossref
Tian Ding, Hongge Yan, Jihua Chen, Weijun Xia, Bin Su & Huaming Zhu. (2022) Microstructure Evolution and Recrystallization Mechanisms of High Mg Alloyed Al-Mg Alloy during Friction Stir Welding with Different Cooling Media. Journal of Materials Engineering and Performance 32:8, pages 3809-3820.
Crossref
Crossref
Mrinal Sahu & Subhas Ganguly. (2022) Distribution of intermetallic compounds in dissimilar joint interface of AA 5083 and HSLA steel welded by FSW technique. Intermetallics 151, pages 107734.
Crossref
Crossref
Abdul Wahab Hashmi, Husain Mehdi, Sipokazi Mabuwa, Velaphi Msomi & Prabhujit Mohapatra. (2022) Influence of FSP Parameters on Wear and Microstructural Characterization of Dissimilar TIG Welded Joints with Si-rich Filler Metal. Silicon 14:17, pages 11131-11145.
Crossref
Crossref
Abdellah Nait Salah, Sipokazi Mabuwa, Husain Mehdi, Velaphi Msomi, Mohammed Kaddami & Prabhujit Mohapatra. (2022) Effect of Multipass FSP on Si-rich TIG Welded Joint of Dissimilar Aluminum Alloys AA8011-H14 and AA5083-H321: EBSD and Microstructural Evolutions. Silicon 14:15, pages 9925-9941.
Crossref
Crossref
L. Feroz Ali, R. Soundararajan & S. Sivasankaran. (2022) Tungsten Nanoparticle Reinforced AA7055 via Friction Stir Process Route with Multi-groove Strategy. Journal of Materials Engineering and Performance.
Crossref
Crossref
Xingyu Li, Ning Xiong, Lin Zhang & Xuanhui Qu. (2022) A novel through-length gradient structure assisted strength-ductility synergy in hot-rolled tungsten. Materials & Design 219, pages 110775.
Crossref
Crossref
Saeed Ahmadifard, Nasir Shahin, Mojtaba Vakili-Azghandi & Shahab Kazemi. (2021) Microstructure, mechanical, and tribological properties of Al7075-T6/Ti3AlC2/Al2O3 surface hybrid nanocomposite produced by friction stir processing: A comparison of hybrid ratio. The International Journal of Advanced Manufacturing Technology 118:7-8, pages 2205-2220.
Crossref
Crossref
Michel Arrigoni. (2022) Metallic Materials and Their Applications in Aerospace and Advanced Technologies. Metals 12:2, pages 226.
Crossref
Crossref
Mohamed M. Z. Ahmed, Mohamed M. El-Sayed Seleman, Ebtessam Elfishawy, Bandar Alzahrani, Kamel Touileb & Mohamed I. A. Habba. (2021) The Effect of Temper Condition and Feeding Speed on the Additive Manufacturing of AA2011 Parts Using Friction Stir Deposition. Materials 14:21, pages 6396.
Crossref
Crossref
A. Heidarzadeh, S. Mironov, R. Kaibyshev, G. Çam, A. Simar, A. Gerlich, F. Khodabakhshi, A. Mostafaei, D.P. Field, J.D. Robson, A. Deschamps & P.J. Withers. (2021) Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution. Progress in Materials Science 117, pages 100752.
Crossref
Crossref
C.J.T. Mason, R.I. Rodriguez, D.Z. Avery, B.J. Phillips, B.P. Bernarding, M.B. Williams, S.D. Cobbs, J.B. Jordon & P.G. Allison. (2021) Process-structure-property relations for as-deposited solid-state additively manufactured high-strength aluminum alloy. Additive Manufacturing 40, pages 101879.
Crossref
Crossref
Nikhil Gotawala, Abhishek Kumar, Sushil Mishra & Amber Shrivastava. (2021) Microstructure and texture evolution of complete Mg-3Al-0.2Ce alloy blanks upon multi-pass friction stir processing with spiral strategy. Materials Today Communications 26, pages 101850.
Crossref
Crossref
R. Viswanathan, K.G. Saravanan, J. Balaji, R. Prabu & K. Balasubramani. (2021) Optimization of wear and friction parameters in Aluminum7075 hybrid composite. Materials Today: Proceedings 47, pages 4449-4453.
Crossref
Crossref
Z. Nouri, R. Taghiabadi & M. Moazami-Goudarzi. (2020) Mechanical properties enhancement of cast Al-8.5Fe-1.3V-1.7Si (FVS0812) alloy by friction stir processing. Archives of Civil and Mechanical Engineering 20:4.
Crossref
Crossref
Suveen N. Mathaudhu. (2020) Building on Gleiter: The Foundations and Future of Deformation Processing of Nanocrystalline Metals. Metallurgical and Materials Transactions A 51:12, pages 6020-6044.
Crossref
Crossref
Sipokazi Mabuwa & Velaphi Msomi. (2020) The impact of submerged friction stir processing on the friction stir welded dissimilar joints. Materials Research Express 7:9, pages 096513.
Crossref
Crossref
Sipokazi Mabuwa & Velaphi Msomi. (2020) Comparative analysis between normal and submerged friction stir processed friction stir welded dissimilar aluminium alloy joints. Journal of Materials Research and Technology 9:5, pages 9632-9644.
Crossref
Crossref
K. S. Krishnamurthy, D. S. Shankar Rao, Madhu B. Kanakala, Channabasaveshwar V. Yelamaggad & Maurice Kleman. (2020) Topological defects due to twist-bend nematic drops mimicking colloidal particles in a nematic medium. Soft Matter 16:32, pages 7479-7491.
Crossref
Crossref
Jialiang Dong, Datong Zhang, Xicai Luo, Weiwen Zhang, Wen Zhang & Cheng Qiu. (2020) EBSD study of underwater friction stir welded AA7003-T4 and AA6060-T4 dissimilar joint. Journal of Materials Research and Technology 9:3, pages 4309-4318.
Crossref
Crossref
Essam B. Moustafa & Ahmed O. Mosleh. (2020) Effect of (Ti–B) modifier elements and FSP on 5052 aluminum alloy. Journal of Alloys and Compounds 823, pages 153745.
Crossref
Crossref
Behrouz BAGHERI, Mahmoud ABBASI, Amin ABDOLLAHZADEH & Seyyed Ehsan MIRSALEHI. (2020) Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP. Transactions of Nonferrous Metals Society of China 30:4, pages 905-916.
Crossref
Crossref
S. Mironov, Y. S. Sato & H. Kokawa. (2020) Grain Structure Evolution during Friction-Stir Welding. Physical Mesomechanics 23:1, pages 21-31.
Crossref
Crossref
Abhishek Kumar, Nikhil Gotawala, Aarush Sood, Sushil Mishra & Amber Shrivastava. 2020. Magnesium Technology 2020. Magnesium Technology 2020
341
346
.
Enrico Salvati, Joris Everaerts, Koji Kageyama & Alexander M. Korsunsky. (2019) Transverse fatigue behaviour and residual stress analyses of double sided FSW aluminium alloy joints. Fatigue & Fracture of Engineering Materials & Structures 42:9, pages 1980-1990.
Crossref
Crossref
H.A. Deore, J. Mishra, A.G. Rao, H. Mehtani & V.D. Hiwarkar. (2019) Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface composites. Surface and Coatings Technology 374, pages 52-64.
Crossref
Crossref
Ning Sun & Diran Apelian. (2018) Friction Stir Processing of Aluminum Alloy A206: Part I—Microstructure Evolution. International Journal of Metalcasting 13:2, pages 234-243.
Crossref
Crossref
M. Abbasi, M. Givi & A. Ramazani. (2018) Friction stir vibration processing: a new method to improve the microstructure and mechanical properties of Al5052/SiC surface nanocomposite layer. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 1463-1473.
Crossref
Crossref
Fatemeh Yousefi, Reza Taghiabadi & Saeid Baghshahi. (2018) Effect of Partial Substitution of Mn for Ni on Mechanical Properties of Friction Stir Processed Hypoeutectic Al-Ni Alloys. Metallurgical and Materials Transactions B 49:6, pages 3007-3018.
Crossref
Crossref
O.G. Rivera, P.G. Allison, L.N. Brewer, O.L. Rodriguez, J.B. Jordon, T. Liu, W.R. Whittington, R.L. Martens, Z. McClelland, C.J.T. Mason, L. Garcia, J.Q. Su & N. Hardwick. (2018) Influence of texture and grain refinement on the mechanical behavior of AA2219 fabricated by high shear solid state material deposition. Materials Science and Engineering: A 724, pages 547-558.
Crossref
Crossref
H. C. Madhu, P. Ajay Kumar, Chandra S. Perugu & Satish V. Kailas. (2018) Microstructure and Mechanical Properties of Friction Stir Process Derived Al-TiO2 Nanocomposite. Journal of Materials Engineering and Performance 27:3, pages 1318-1326.
Crossref
Crossref
Phalgun Nelaturu, Saumyadeep Jana, Rajiv S. Mishra, Glenn Grant & Blair E. Carlson. (2018) Influence of friction stir processing on the room temperature fatigue cracking mechanisms of A356 aluminum alloy. Materials Science and Engineering: A 716, pages 165-178.
Crossref
Crossref
Devinder Yadav, Ranjit Bauri & Niraj Chawake. (2018) Fabrication of Al-Zn solid solution via friction stir processing. Materials Characterization 136, pages 221-228.
Crossref
Crossref
V. Kalyanamanohar & D. Gireesh Chandra Appalachari. Parameter optimization and evaluation of mechanical and thermal properties of nanographene reinforced Al 6060 surface composite using FSP. Parameter optimization and evaluation of mechanical and thermal properties of nanographene reinforced Al 6060 surface composite using FSP.
G.K. Padhy, C.S. Wu & S. Gao. (2018) Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review. Journal of Materials Science & Technology 34:1, pages 1-38.
Crossref
Crossref
Ranjit Bauri & Devinder Yadav. 2018. Metal Matrix Composites by Friction Stir Processing. Metal Matrix Composites by Friction Stir Processing
57
91
.
Ranjit Bauri & Devinder Yadav. 2018. Metal Matrix Composites by Friction Stir Processing. Metal Matrix Composites by Friction Stir Processing
17
29
.
P. K. Mandal. 2018. Proceedings of Fatigue, Durability and Fracture Mechanics. Proceedings of Fatigue, Durability and Fracture Mechanics
223
236
.
Saikat Acharya, R.K. Gupta, Jiten Ghosh, Sandip Bysakh, K.S. Ghosh, D.K. Mondal & A.K. Mukhopadhyay. (2017) High strain rate dynamic compressive behaviour of Al6061-T6 alloys. Materials Characterization 127, pages 185-197.
Crossref
Crossref
Ajay Kumar P.Devinder Yadav, Chandra S. Perugu & Satish V. Kailas. (2017) Influence of particulate reinforcement on microstructure evolution and tensile properties of in-situ polymer derived MMC by friction stir processing. Materials & Design 113, pages 99-108.
Crossref
Crossref
M. A. García-Bernal, R. S. Mishra, D. Hernández-Silva & V. M. Sauce-Rangel. (2016) Microstructural Homogeneity and Hot Deformation of Various Friction-Stir-Processed 5083 Al Alloys. Journal of Materials Engineering and Performance 26:1, pages 460-464.
Crossref
Crossref
Thomas Gietzelt, Torsten Wunsch, Florian Messerschmidt, Holger Geßwein & Uta Gerhards. (2016) Influence of Laser Welding Speed on the Morphology and Phases Occurring in Spray-Compacted Hypereutectic Al-Si-Alloys. Metals 6:12, pages 295.
Crossref
Crossref
N. Kumar, R.S. Mishra, N.B. Dahotre, R.E. Brennan, K.J. Doherty & K.C. Cho. (2016) Effect of friction stir processing on microstructure and mechanical properties of laser-processed Mg 4Y 3Nd alloy. Materials & Design 110, pages 663-675.
Crossref
Crossref
Devinder Yadav, Ranjit Bauri, Alexander Kauffmann & Jens Freudenberger. (2016) Al-Ti Particulate Composite: Processing and Studies on Particle Twinning, Microstructure, and Thermal Stability. Metallurgical and Materials Transactions A 47:8, pages 4226-4238.
Crossref
Crossref
M.A. García-Bernal, R.S. Mishra, R. Verma & D. Hernández-Silva. (2016) Influence of friction stir processing tool design on microstructure and superplastic behavior of Al-Mg alloys. Materials Science and Engineering: A 670, pages 9-16.
Crossref
Crossref
Arif Uzun & Mehmet Turker. (2016)
Friction stir welding of foamable AlSi7 reinforced by B
4
C
. International Journal of Materials Research 107:6, pages 558-565.
Crossref
Crossref
Saumyadeep Jana, Rajiv S. Mishra & Glenn J. Grant. 2016. Friction Stir Casting Modification for Enhanced Structural Efficiency. Friction Stir Casting Modification for Enhanced Structural Efficiency
5
27
.
K. Wang, F. C. Liu, P. Xue, D. Wang, B. L. Xiao & Z. Y. Ma. (2015) Superplastic Constitutive Equation Including Percentage of High-Angle Grain Boundaries as a Microstructural Parameter. Metallurgical and Materials Transactions A 47:1, pages 546-559.
Crossref
Crossref
C.N. Shyam Kumar, Devinder Yadav, Ranjit Bauri & G.D. Janaki Ram. (2015) Effects of ball milling and particle size on microstructure and properties 5083 Al–Ni composites fabricated by friction stir processing. Materials Science and Engineering: A 645, pages 205-212.
Crossref
Crossref
M. Sarkari Khorrami, M. Kazeminezhad & A.H. Kokabi. (2015) Thermal stability of aluminum after friction stir processing with SiC nanoparticles. Materials & Design 80, pages 41-50.
Crossref
Crossref
F. Khodabakhshi, A. Simchi, A.H. Kokabi, A.P. Gerlich & M. Nosko. (2015) Effects of stored strain energy on restoration mechanisms and texture components in an aluminum–magnesium alloy prepared by friction stir processing. Materials Science and Engineering: A 642, pages 204-214.
Crossref
Crossref
N. Kumar, D. Choudhuri, R. Banerjee & R.S. Mishra. (2015) Strength and ductility optimization of Mg–Y–Nd–Zr alloy by microstructural design. International Journal of Plasticity 68, pages 77-97.
Crossref
Crossref
Geng Hua Cao & Da Tong Zhang. (2015) Microstructure and Mechanical Properties of Submerged Friction Stir Processing Mg-Y-Nd Alloy. Materials Science Forum 816, pages 404-410.
Crossref
Crossref
Qiaodan Hu, Peng Luo, Youwei Yan & Jianguo Li. (2015) Quantitative Analysis of Heterogeneous Microstructure and Diversified Strengthening Mechanisms in Spark Plasma Sintered Molybdenum Disilicide. Metallurgical and Materials Transactions A 46:4, pages 1443-1449.
Crossref
Crossref
Ranjit Bauri, G.D. Janaki Ram, Devinder Yadav & C.N. Shyam Kumar. (2015) Effect of Process Parameters and Tool Geometry on Fabrication of Ni Particles Reinforced 5083 Al Composite by Friction Stir Processing. Materials Today: Proceedings 2:4-5, pages 3203-3211.
Crossref
Crossref
Man-ping LIU, Ting-hui JIANG, Xue-feng XIE, Qiang LIU, Xue-feng LI & Hans J. ROVEN. (2014) Microstructure evolution and dislocation configurations in nanostructured Al–Mg alloys processed by high pressure torsion. Transactions of Nonferrous Metals Society of China 24:12, pages 3848-3857.
Crossref
Crossref
Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin, Mohamed Sennour, Anne Laurent, Jacques Besson & Anne-Françoise Gourgues-Lorenzon. (2014) Microstructural Characterization of Internal Welding Defects and Their Effect on the Tensile Behavior of FSW Joints of AA2198 Al-Cu-Li Alloy. Metallurgical and Materials Transactions A 45:12, pages 5531-5544.
Crossref
Crossref
M. Cinta Lorenzo-Martin & Oyelayo O. Ajayi. (2014) Surface Layer Modification of 6061 Al Alloy by Friction Stir Processing and Second Phase Hard Particles for Improved Friction and Wear Performance. Journal of Tribology 136:4.
Crossref
Crossref
A. H. Feng, D. L. Chen, Z. Y. Ma, W. Y. Ma & R. J. Song. (2014) Microstructure and Strain Hardening of a Friction Stir Welded High-Strength Al–Zn–Mg Alloy. Acta Metallurgica Sinica (English Letters) 27:4, pages 723-729.
Crossref
Crossref
M. Tauhiduzzaman & S.C. Veldhuis. (2014) Effect of material microstructure and tool geometry on surface generation in single point diamond turning. Precision Engineering 38:3, pages 481-491.
Crossref
Crossref
N. Kumar, M. Komarasamy & R. S. Mishra. (2014) Plastic deformation behavior of ultrafine-grained Al–Mg–Sc alloy. Journal of Materials Science 49:12, pages 4202-4214.
Crossref
Crossref
Ranjit Bauri. (2014) Optimization of process parameters for friction stir processing (FSP) of Al–TiC in situ composite. Bulletin of Materials Science 37:3, pages 571-578.
Crossref
Crossref
Fang Chai, Datong Zhang, Weiwen Zhang & Yuanyuan Li. (2014) Microstructure evolution during high strain rate tensile deformation of a fine-grained AZ91 magnesium alloy. Materials Science and Engineering: A 590, pages 80-87.
Crossref
Crossref
Rajiv Sharan Mishra, Partha Sarathi De & Nilesh KumarRajiv Sharan Mishra, Partha Sarathi De & Nilesh Kumar. 2014. Friction Stir Welding and Processing. Friction Stir Welding and Processing
149
187
.
J.J.S. Dilip & G.D. Janaki Ram. (2013) Microstructure evolution in aluminum alloy AA 2014 during multi-layer friction deposition. Materials Characterization 86, pages 146-151.
Crossref
Crossref
P. Xue, B.L. Xiao & Z.Y. Ma. (2013) Achieving Large-area Bulk Ultrafine Grained Cu via Submerged Multiple-pass Friction Stir Processing. Journal of Materials Science & Technology 29:12, pages 1111-1115.
Crossref
Crossref
Daniel L. Worthington, Nicholas A. Pedrazas, Philip J. Noell & Eric M. Taleff. (2013) Dynamic Abnormal Grain Growth in Molybdenum. Metallurgical and Materials Transactions A 44:11, pages 5025-5038.
Crossref
Crossref
A. G. Rao, K. R. Ravi, B. Ramakrishnarao, V. P. Deshmukh, A. Sharma, N. Prabhu & B. P. Kashyap. (2012) Recrystallization Phenomena During Friction Stir Processing of Hypereutectic Aluminum-Silicon Alloy. Metallurgical and Materials Transactions A 44:3, pages 1519-1529.
Crossref
Crossref
Nilesh Kumar & Rajiv S. Mishra. (2012) Ultrafine-Grained Al-Mg-Sc Alloy via Friction-Stir Processing. Metallurgical and Materials Transactions A 44:2, pages 934-945.
Crossref
Crossref
Jiye Wang, Wei Yuan, Rajiv S. Mishra & Indrajit Charit. (2013) Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened alloy. Journal of Nuclear Materials 432:1-3, pages 274-280.
Crossref
Crossref
Jordan Suharto & Young Gun Ko. (2012) Annealing behavior of severely deformed IF steel via the differential speed rolling method. Materials Science and Engineering: A 558, pages 90-94.
Crossref
Crossref
Ning Sun & Diran Apelian. 2012. Supplemental Proceedings. Supplemental Proceedings
411
418
.
N. Sun & D. Apelian. (2011) Friction stir processing of aluminum cast alloys for high performance applications. JOM 63:11, pages 44-50.
Crossref
Crossref
N. Kumar, R.S. Mishra, C.S. Huskamp & K.K. Sankaran. (2011) Microstructure and mechanical behavior of friction stir processed ultrafine grained Al–Mg–Sc alloy. Materials Science and Engineering: A 528:18, pages 5883-5887.
Crossref
Crossref
Jian-Qing Su, T.W. Nelson, T.R. McNelley & R.S. Mishra. (2011) Development of nanocrystalline structure in Cu during friction stir processing (FSP). Materials Science and Engineering: A 528:16-17, pages 5458-5464.
Crossref
Crossref
Ranjit Bauri, Devinder Yadav & G. Suhas. (2011) Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite. Materials Science and Engineering: A 528:13-14, pages 4732-4739.
Crossref
Crossref
N. Kumar, R.S. Mishra, C.S. Huskamp & K.K. Sankaran. (2011) Critical grain size for change in deformation behavior in ultrafine grained Al–Mg–Sc alloy. Scripta Materialia 64:6, pages 576-579.
Crossref
Crossref
Devinder Yadav & Ranjit Bauri. (2011) Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite. Materials Science and Engineering: A 528:3, pages 1326-1333.
Crossref
Crossref
S. Jana, R.S. Mishra, J.A. Baumann & G. Grant. (2010) Effect of process parameters on abnormal grain growth during friction stir processing of a cast Al alloy. Materials Science and Engineering: A 528:1, pages 189-199.
Crossref
Crossref
Saumyadeep Jana, Rajiv S. Mishra, John A. Baumann & Glenn J. Grant. (2010) Effect of Friction Stir Processing on Microstructure and Tensile Properties of an Investment Cast Al-7Si-0.6Mg Alloy. Metallurgical and Materials Transactions A 41:10, pages 2507-2521.
Crossref
Crossref
R. Kapoor, N. Kumar, R.S. Mishra, C.S. Huskamp & K.K. Sankaran. (2010) Influence of fraction of high angle boundaries on the mechanical behavior of an ultrafine grained Al–Mg alloy. Materials Science and Engineering: A 527:20, pages 5246-5254.
Crossref
Crossref
A.H. Feng, D.L. Chen & Z.Y. Ma. (2010) Microstructure and Cyclic Deformation Behavior of a Friction-Stir-Welded 7075 Al Alloy. Metallurgical and Materials Transactions A 41:4, pages 957-971.
Crossref
Crossref
Ning Sun & Diran Apelian. (2009) Microstructural Modification of A206 Aluminium via Friction Stir Processing. Materials Science Forum 618-619, pages 361-364.
Crossref
Crossref
C.M. Hu, C.M. Lai, P.W. Kao, N.J. Ho & J.C. Huang. (2009) Solute-enhanced tensile ductility of ultrafine-grained Al–Zn alloy fabricated by friction stir processing. Scripta Materialia 60:8, pages 639-642.
Crossref
Crossref
Rajiv S. Mishra. 2009. Bulk Nanostructured Materials. Bulk Nanostructured Materials
255
272
.
A.H. Feng & Z.Y. Ma. (2007) Enhanced mechanical properties of Mg–Al–Zn cast alloy via friction stir processing. Scripta Materialia 56:5, pages 397-400.
Crossref
Crossref