Advanced search
Publication Cover
Philosophical Magazine Volume 86, 2006 - Issue 28
Submit an article Journal homepage
206
Views
41
CrossRef citations to date
0
Altmetric
Original Articles

In situ observations of compressive behaviour of aluminium foams by local tomography using high-resolution X-rays

T. Ohgaki Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441-8580, JapanCorrespondence[email protected]
,
H. Toda Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441-8580, Japan
,
M. Kobayashi Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441-8580, Japan
,
K. Uesugi Japan Synchrotron Radiation Research Institute, Sayo-cho, Hyogo 679-5198
,
M. Niinomi Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441-8580, Japan
,
T. Akahori Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441-8580, Japan
,
T. Kobayash Department of Production Systems Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441-8580, Japan
,
K. Makii Materials Research Laboratory, Kobe Steel, Ltd, Kobe, Hyogo 651-2271
&
Y. Aruga Materials Research Laboratory, Kobe Steel, Ltd, Kobe, Hyogo 651-2271
 show all
Pages 4417-4438 | Received 08 Nov 2005, Accepted 21 Mar 2006, Published online: 21 Feb 2007

Citations (41)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Y. Ozaki, Y. Mugita, M. Aramaki, O. Furukimi, S. Oue, F. Jiang, T. Tsuji, A. Takeuchi, M. Uesugi & K. Ashizuka. (2019) Four-dimensional observation of ductile fracture in sintered iron using synchrotron X-ray laminography. Powder Metallurgy 62:2, pages 146-154.
Read now
Katherine Ramos & Karel Matouš. (2018) Micro-computed tomography based experimental investigation of micro- and macro-mechanical response of particulate composites with void growth. Philosophical Magazine 98:34, pages 3049-3071.
Read now
M. Kobayashi, Y. Dorce, H. Toda & H. Horikawa. (2010) Effect of local volume fraction of microporosity on tensile properties in Al–Si–Mg cast alloy. Materials Science and Technology 26:8, pages 962-967.
Read now
Qiang Zhang, Hiroyuki Toda, Yasutaka Takami, Yoshio Suzuki, Kentaro Uesugi & Masakazu Kobayashi. (2010) Assessment of 3D inhomogeneous microstructure of highly alloyed aluminium foam via dual energy K-edge subtraction imaging. Philosophical Magazine 90:14, pages 1853-1871.
Read now
S. R. Stock. (2008) Recent advances in X-ray microtomography applied to materials. International Materials Reviews 53:3, pages 129-181.
Read now

Articles from other publishers (36)

Sharaf U Nisa, Sunil Pandey & PM Pandey. (2022) A review of the compressive properties of closed-cell aluminum metal foams. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237:2, pages 531-545.
Crossref
Rakesh K. Sindhu, Shantanu K. Yadav, Arashmeet Kaur, Manish Kumar & Pradeep Kumar. 2022. X‐Ray Fluorescence in Biological Sciences. X‐Ray Fluorescence in Biological Sciences 623 646 .
Isshin Ando, Yasutaka Mugita, Kyosuke Hirayama, Shinji Munetoh, Masatoshi Aramaki, Fei Jiang, Takeshi Tsuji, Akihisa Takeuchi, Masayuki Uesugi & Yukiko Ozaki. (2021) Elucidation of pore connection mechanism during ductile fracture of sintered pure iron by applying persistent homology to 4D images of pores: Role of open pore. Materials Science and Engineering: A 828, pages 142112.
Crossref
Yang Yu, Zhuokun Cao, Jiaqi Wang, Ganfeng Tu & Yongliang Mu. (2021) Compressive Behavior of Al-TiB2 Composite Foams Fabricated under Increased Pressure. Materials 14:17, pages 5112.
Crossref
F. García-Moreno, M. Jürgens & J. Banhart. (2020) Temperature dependence of film rupture and internal structural stability in liquid aluminium alloy foams. Acta Materialia 196, pages 325-337.
Crossref
B.Y. Casas, J.C. Carranza, L. Béjar, C. Aguilar, I.A. Figueroa & I. Alfonso. (2020) Production of aluminum foams with hierarchical porosity by a combination of two different manufacturing methods. Journal of Alloys and Compounds 831, pages 154780.
Crossref
Masakazu Kobayashi & Hiromi Miura. (2020) 3D/4D characterization of strain distribution evolving within the microstructure during plastic deformation. Current Opinion in Solid State and Materials Science 24:3, pages 100835.
Crossref
Ali C. Kaya, Paul Zaslansky, Alexander Rack, Sebastian F. Fischer & Claudia Fleck. (2019) Foams of Gray Cast Iron as Efficient Energy Absorption Structures: A Feasibility Study. Advanced Engineering Materials 21:6, pages 1900080.
Crossref
Takashi Kuwahara, Mizuki Saito, Taro Osaka & Shinsuke Suzuki. (2019) Effect of Primary Crystals on Pore Morphology during Semi-Solid Foaming of A2024 Alloys. Metals 9:1, pages 88.
Crossref
Mark A. Atwater, Laura N. Guevara, Kris A. Darling & Mark A. Tschopp. (2018) Solid State Porous Metal Production: A Review of the Capabilities, Characteristics, and Challenges. Advanced Engineering Materials 20:7, pages 1700766.
Crossref
Ningzhen Wang, Eric Maire, Ying Cheng, Yasin Amani, Yanxiang Li, Jérôme Adrien & Xiang Chen. (2018) Comparison of aluminium foams prepared by different methods using X-ray tomography. Materials Characterization 138, pages 296-307.
Crossref
J. Nellesen, R. Laquai, B. R. Müller, A. Kupsch, M. P. Hentschel, N. B. Anar, E. Soppa, W. Tillmann & G. Bruno. (2018) In situ analysis of damage evolution in an Al/$$\hbox {Al}_{2}\hbox {O}_{3}$$Al2O3 MMC under tensile load by synchrotron X-ray refraction imaging. Journal of Materials Science 53:8, pages 6021-6032.
Crossref
Hui Jing & Weidong Yu. (2017) Microstructure of cotton fibrous assemblies based on computed tomography. IOP Conference Series: Materials Science and Engineering 274, pages 012059.
Crossref
M. Mukherjee, F. García-Moreno, C. Jiménez, A. Rack & J. Banhart. (2017) Microporosity in aluminium foams. Acta Materialia 131, pages 156-168.
Crossref
Ali Can Kaya, Paul Zaslansky, Anneke Nikolaus & Claudia Fleck. (2016) Tensile failure observations in sintered steel foam struts revealed by sub-micron contrast-enhanced microtomography. Materials & Design 105, pages 190-200.
Crossref
Bilal Mansoor, H. Nassar, V.C. Shunmugasamy & M.K. Khraisheh. (2015) Three dimensional forming of compressed open-cell metallic foams at elevated temperatures. Materials Science and Engineering: A 628, pages 433-441.
Crossref
Pierre Lhuissier. (2014) Structural properties of solid foams. Comptes Rendus Physique 15:8-9, pages 696-704.
Crossref
Russell Goodall & Andreas Mortensen. 2014. Physical Metallurgy. Physical Metallurgy 2399 2595 .
Jaime Lázaro, Eusebio Solórzano, Javier Escudero, Jose de Saja & Miguel Rodríguez-Pérez. (2012) Applicability of Solid Solution Heat Treatments to Aluminum Foams. Metals 2:4, pages 508-528.
Crossref
Xiaomin Wu, Erik Schlangen & Sybrand van der Zwaag. (2012) Linking Porosity to Rolling Reduction and Fatigue Lifetime of Hot Rolled AA7xxx Alloys by 3D X-Ray Computed Tomography. Advanced Engineering Materials 14:7, pages 457-463.
Crossref
Xiaomin Wu, Erik Schlangen & Sybrand van der Zwaag. (2012) Linking Crack Tip Morphology to Tear Toughness of Hot Rolled AA7050 Alloys Using X-Ray Computed Tomography. Advanced Engineering Materials 14:7, pages 449-456.
Crossref
Zhang Qiang & Hiroyuki Toda. (2011) Synchrotron K-edge subtraction imaging and its application to metallic foams. Acta Physica Sinica 60:11, pages 114103.
Crossref
M. Mukherjee, U. Ramamurty, F. Garcia-Moreno & J. Banhart. (2010) The effect of cooling rate on the structure and properties of closed-cell aluminium foams. Acta Materialia 58:15, pages 5031-5042.
Crossref
Masakazu Kobayashi, Hiroyuki Toda & Kentaro Uesugi. (2010) Three-Dimensional Visualization and Analysis of Grain Deformation by Means of Synchrotron Radiation. Materials Science Forum 638-642, pages 2523-2528.
Crossref
Qiang Zhang, Peter D. Lee, Randhir Singh, Gaohui Wu & Trevor C. Lindley. (2009) Micro-CT characterization of structural features and deformation behavior of fly ash/aluminum syntactic foam. Acta Materialia 57:10, pages 3003-3011.
Crossref
K. Haldrup, R.D. McGinty & D.L. McDowell. (2009) Effects of constraints on lattice re-orientation and strain in polycrystal plasticity simulations. Computational Materials Science 44:4, pages 1198-1207.
Crossref
Stuart Stock. 2008. MicroComputed Tomography. MicroComputed Tomography 171 213 .
Stuart Stock. 2008. MicroComputed Tomography. MicroComputed Tomography 85 114 .
Stuart Stock. 2008. MicroComputed Tomography. MicroComputed Tomography 21 38 .
K. Haldrup, F. Beckmann, S.F. Nielsen & J.A. Wert. (2008) Experimental determination of strain partitioning among individual grains in the bulk of an aluminium multicrystal. Materials Characterization 59:7, pages 842-851.
Crossref
Masakazu Kobayashi, Hiroyuki Toda, Yuji Kawai, Tomomi Ohgaki, Kentaro Uesugi, David S. Wilkinson, Toshiro Kobayashi, Yoshimitsu Aoki & Mitsuru Nakazawa. (2008) High-density three-dimensional mapping of internal strain by tracking microstructural features. Acta Materialia 56:10, pages 2167-2181.
Crossref
K. Haldrup, S. F. Nielsen & J. A. Wert. (2007) A General Methodology for Full-Field Plastic Strain Measurements Using X-ray Absorption Tomography and Internal Markers. Experimental Mechanics 48:2, pages 199-211.
Crossref
Kristoffer Haldrup & John A. Werty. 2008. Neutrons and Synchrotron Radiation in Engineering Materials Science. Neutrons and Synchrotron Radiation in Engineering Materials Science 371 377 .
F. Beckmann, R. Grupp, A. Haibel, M. Huppmann, M. Nöthe, A. Pyzalla, W. Reimers, A. Schreyer & R. Zettler. (2007) In‐Situ Synchrotron X‐Ray Microtomography Studies of Microstructure and Damage Evolution in Engineering Materials. Advanced Engineering Materials 9:11, pages 939-950.
Crossref
Tomomi Ohgaki, Y. Takami, Hiroyuki Toda, Toshiro Kobayashi, Y. Suzuki, Kentaro Uesugi, Koichi MakiiToshiaki TakagiYasuhiro Aruga. (2007) Three-Dimensional Zinc Mapping inside Aluminum Foams Using Synchrotron X-Ray Microtomography. Materials Science Forum 561-565, pages 1677-1680.
Crossref
Masakazu Kobayashi, Hiroyuki Toda, Yuji Kawai, Toshiro Kobayashi, Kentaro Uesugi, David S. Wilkinson, Eric Maire & Yoshimitsu Aoki. (2007) Measurement of 3-D Strain Distribution by means of High-Resolution X-ray CT Image and Tracking of Microstructural Features. Journal of the Japan Institute of Metals 71:2, pages 181-186.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.