Advanced search
Publication Cover
Philosophical Magazine Volume 86, 2006 - Issue 33-35: Instrumented Nanoindentation, Guest Editors: Nigel Jennett, George Pharr and Carl McHargue
Submit an article Journal homepage
797
Views
49
CrossRef citations to date
0
Altmetric
Original Articles

On the measurement of yield strength by spherical indentation

E. G. Herbert Department of Materials Science and Engineering, University of Tennessee, 434 Dougherty Engineering Bldg., Knoxville, TN 37996-2200, USA; MTS Nano Instruments Innovation Center, Oak Ridge, TN 37830, USACorrespondence[email protected]
,
W. C. Oliver Department of Materials Science and Engineering, University of Tennessee, 434 Dougherty Engineering Bldg., Knoxville, TN 37996-2200, USA; MTS Nano Instruments Innovation Center, Oak Ridge, TN 37830, USA
&
G. M. Pharr Department of Materials Science and Engineering, University of Tennessee, 434 Dougherty Engineering Bldg., Knoxville, TN 37996-2200, USA; Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA
Pages 5521-5539 | Received 31 Oct 2005, Accepted 02 Apr 2006, Published online: 21 Nov 2006

Citations (49)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

O Takakuwa, M Nishikawa & H Soyama. (2011) Technique for partially strengthening electrical steel sheet of IPM motor using cavitation peening. Materials Science and Technology 27:9, pages 1422-1426.
Read now

Articles from other publishers (48)

Z. Tomić, T. Jarak, B. Pavlović & Z. Tonković. (2023) On Extracting Stress–Strain Curves of Porous Multi-Phase Sintered Steels by Microindentation. Experimental Techniques.
Crossref
Fereshteh Mallakpour, Masoud Kasraie, Erik G. Herbert, P. Sudharshan Phani, Donald L. ErdmanIIIIII & Stephen A. Hackney. (2023) On the correlation between the stress exponent for creep determined by nanoindentation and the mechanism of action enabling stress relief in indium. Journal of Materials Research 38:14, pages 3431-3445.
Crossref
P. Kubaschinski, A. Gottwalt‐Baruth, U. Tetzlaff, H. Altenbach & M. Waltz. (2023) Modelling and simulation of the hardness profile and its effect on the stress‐strain behaviour of punched electrical steel sheets. Materialwissenschaft und Werkstofftechnik 54:4, pages 512-526.
Crossref
Jianwei Zhang, Yuanxin Li, Xuefeng Zheng, Gang Wang & Minghao Zhao. (2022) Determination of plastic properties of surface modification layer of metallic materials from scratch tests. Engineering Failure Analysis 142, pages 106754.
Crossref
Takahiro Mineta. (2022) Analysis of indentation stress-strain response of copper by in-situ observation using optical indentation microscopy. Results in Engineering 15, pages 100547.
Crossref
Z.Y. Liang & G.M. Pharr. (2022) Decoupling indentation size and strain rate effects during nanoindentation: A case study in tungsten. Journal of the Mechanics and Physics of Solids 165, pages 104935.
Crossref
Aaron E. Tallman, Tanaji Paul, Denny John & Arvind Agarwal. (2022) Uncertainty Quantification of a High-Throughput Profilometry-Based Indentation Plasticity Test of Al 7075 T6 Alloy. Frontiers in Materials 9.
Crossref
Petr M. Ogar, Valery A. Shilin & Elena V. Ugryumova. (2022) Determination of the Tensile Strain by Indenting the Sphere. Key Engineering Materials 910, pages 1049-1055.
Crossref
Andrei Chychko, José García, Verónica Collado Ciprés, Erik Holmström & Andreas Blomqvist. (2022) HV-KIC property charts of cemented carbides: A comprehensive data collection. International Journal of Refractory Metals and Hard Materials 103, pages 105763.
Crossref
Christian Ullner, Andreas Subaric-Leitis & Matthias Bartholmai. (2021) Uncertainty of Elastoplastic Material Parameters Calculated from the Spherical Indentation in the Macro Range. Journal of Testing and Evaluation 49:6, pages 20200683.
Crossref
Fei-Ya Huang, Yen-Wen Liu & Jui-Chao Kuo. (2021) Uncertainties in the representative indentation stress and strain using spherical nanoindentation. Applied Nanoscience 11:3, pages 895-909.
Crossref
HaiTao Liu, MingHao Zhao, Chunsheng Lu & JianWei Zhang. (2020) Characterization on the yield stress and interfacial coefficient of friction of glasses from scratch tests. Ceramics International 46:5, pages 6060-6066.
Crossref
Anirudh Bhat & R. W. Neu. (2020) On the Constraint Factor Relating Uniaxial and Indentation Yield Strength of Polycrystalline Materials Using Spherical Microindentation. Materials Performance and Characterization 9:1, pages 20190260.
Crossref
Petr Ogar, Vladislav Kushnarev & Inna Kobzova. (2019) Energy approach to determine mechanical properties of materials from the kinetic diagram of spherical indentation. Materials Today: Proceedings 19, pages 2342-2346.
Crossref
Bolla Reddy Bodapati, P. Sudharshan Phani, P. P. Bhattacharjee & G. Sundararajan. (2018) On the Constraint Factor and Tabor Coefficient Pertinent to Spherical Indentation. Transactions of the Indian Institute of Metals 71:12, pages 2893-2901.
Crossref
Mengqi Zhang, Zhao Ning, Qian Wang, Nagaraj Arakere, Qinghua Zhou, Zhanjiang Wang, Xiaoqing Jin & Leon M. Keer. (2018) Contact elasto-plasticity of inhomogeneous materials and a numerical method for estimating matrix yield strength of composites. Tribology International 127, pages 84-95.
Crossref
Chao Chang, M. A. Garrido, J. Ruiz-Hervias, Zhu Zhang & Le-le Zhang. (2018) Representative Stress-Strain Curve by Spherical Indentation on Elastic-Plastic Materials. Advances in Materials Science and Engineering 2018, pages 1-9.
Crossref
Jaraslov Menčík. 2018. Emerging Nanotechnologies in Dentistry. Emerging Nanotechnologies in Dentistry 307 326 .
J. Dean & T.W. Clyne. (2017) Extraction of plasticity parameters from a single test using a spherical indenter and FEM modelling. Mechanics of Materials 105, pages 112-122.
Crossref
Moo-Young Seok, Jung-A Lee, Dong-Hyun Lee, Upadrasta Ramamurty, Shoichi Nambu, Toshihiko Koseki & Jae-il Jang. (2016) Decoupling the contributions of constituent layers to the strength and ductility of a multi-layered steel. Acta Materialia 121, pages 164-172.
Crossref
André Clausner & Frank Richter. (2016) Fundamental limitations at the determination of initial yield stress using nano-indentation with spherical tips. European Journal of Mechanics - A/Solids 58, pages 69-75.
Crossref
M. Sebastiani, K.E. Johanns, E.G. Herbert & G.M. Pharr. (2015) Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges. Current Opinion in Solid State and Materials Science 19:6, pages 324-333.
Crossref
Samir Chandra Roy, Jean-Pierre Franc & Marc Fivel. (2015) Cavitation erosion: Using the target material as a pressure sensor. Journal of Applied Physics 118:16.
Crossref
Kunkun Fu, Li Chang, Bailin Zheng, Youhong Tang & Hongjian Wang. (2015) On the determination of representative stress–strain relation of metallic materials using instrumented indentation. Materials & Design (1980-2015) 65, pages 989-994.
Crossref
Moo-Young Seok, Yong-Jae Kim, In-Chul Choi, Yakai Zhao & Jae-il Jang. (2014) Predicting flow curves of two-phase steels from spherical nanoindentation data of constituent phases: Isostrain method vs. non-isostrain method. International Journal of Plasticity 59, pages 108-118.
Crossref
Weidong Li, Hongbin Bei, Jun Qu & Yanfei Gao. (2013) Effects of machine stiffness on the loading–displacement curve during spherical nano-indentation. Journal of Materials Research 28:14, pages 1903-1911.
Crossref
S. Chenna Krishna, Narendra Kumar Gangwar, Abhay K. Jha & Bhanu Pant. (2013) On the Prediction of Strength from Hardness for Copper Alloys. Journal of Materials 2013, pages 1-6.
Crossref
E. S. KIM & S. K. CHOI. (2013) Failure analysis of connecting bolts in collapsed tower crane. Fatigue & Fracture of Engineering Materials & Structures 36:3, pages 228-241.
Crossref
O. Bartier & X. Hernot. (2012) Phenomenological study of parabolic and spherical indentation of elastic-ideally plastic material. International Journal of Solids and Structures 49:14, pages 2015-2026.
Crossref
V. I. Kushch & S. N. Dub. (2012) The assessment of elasto-plastic properties of materials from nanoindentation and computer modeling. 1. State-of-the-art of the problem (Review of the literature). Journal of Superhard Materials 34:3, pages 149-155.
Crossref
Minh-Quy Le. (2012) Material characterization by instrumented spherical indentation. Mechanics of Materials 46, pages 42-56.
Crossref
J. Menčík. 2012. Emerging Nanotechnologies in Dentistry. Emerging Nanotechnologies in Dentistry 289 306 .
X. Xiao, X.M. Shan, Y. Kayaba, K. Kohmura, H. Tanaka & T. Kikkawa. (2011) Young’s modulus evaluation by SAWs for porous silica low-k film with cesium doping. Microelectronic Engineering 88:5, pages 666-670.
Crossref
Akio YONEZU, Yuya TOUDA, HakGui KIM, Keishi YONEDA, Masayuki SAKIHARA & Kohji MINOSHIMA. (2011) Prediction of Residual Life of Low-Cycle Fatigue in Austenitic Stainless Steel Based on Indentation Test押込み試験法に基づくオーステナイト系ステンレス鋼低サイクル疲労材の余寿命推定. TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 77:783, pages 1859-1870.
Crossref
Jin Chong Tan & Anthony K. Cheetham. (2011) Mechanical properties of hybrid inorganic–organic framework materials: establishing fundamental structure–property relationships. Chemical Society Reviews 40:2, pages 1059.
Crossref
Akio Yonezu, Keishi Yoneda, Hiroyuki Hirakata, Masayuki Sakihara & Kohji Minoshima. (2010) A simple method to evaluate anisotropic plastic properties based on dimensionless function of single spherical indentation – Application to SiC whisker-reinforced aluminum alloy. Materials Science and Engineering: A 527:29-30, pages 7646-7657.
Crossref
Shan Xingmeng, Xiao Xia & Liu Yaliang. (2010) Young's modulus characterization of low- k films of nanoporous Black Diamond™ by surface acoustic waves . Journal of Semiconductors 31:8, pages 082002.
Crossref
George M. Pharr, Erik G. HerbertYanfei Gao. (2010) The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations. Annual Review of Materials Research 40:1, pages 271-292.
Crossref
Wenyi Yan & Chung Lun Pun. (2010) Spherical indentation of metallic foams. Materials Science and Engineering: A 527:13-14, pages 3166-3175.
Crossref
Taihua Zhang, Peng Jiang, Yihui Feng & Rong Yang. (2011) Numerical verification for instrumented spherical indentation techniques in determining the plastic properties of materials. Journal of Materials Research 24:12, pages 3653-3663.
Crossref
J. Hay. (2009) INTRODUCTION TO INSTRUMENTED INDENTATION TESTING. Experimental Techniques 33:6, pages 66-72.
Crossref
Erik G. Herbert, Warren C. Oliver, Maarten P. de Boer & George M. Pharr. (2011) Measuring the elastic modulus and residual stress of freestanding thin films using nanoindentation techniques. Journal of Materials Research 24:9, pages 2974-2985.
Crossref
Nagahisa Ogasawara, Norimasa Chiba & Xi Chen. (2009) A simple framework of spherical indentation for measuring elastoplastic properties. Mechanics of Materials 41:9, pages 1025-1033.
Crossref
Byoung-Wook Choi, Dong-Han Seo, Jang-Yong Yoo & Jae-il Jang. (2011) Predicting macroscopic plastic flow of high-performance, dual-phase steel through spherical nanoindentation on each microphase. Journal of Materials Research 24:3, pages 816-822.
Crossref
Peng Jiang, Taihua Zhang, Yihui Feng, Rong Yang & Naigang Liang. (2011) Determination of plastic properties by instrumented spherical indentation: Expanding cavity model and similarity solution approach. Journal of Materials Research 24:3, pages 1045-1053.
Crossref
Sanghoon Shim, Jae-il Jang & G.M. Pharr. (2008) Extraction of flow properties of single-crystal silicon carbide by nanoindentation and finite-element simulation. Acta Materialia 56:15, pages 3824-3832.
Crossref
Karsten Durst, Mathias Göken & George M Pharr. (2008) Indentation size effect in spherical and pyramidal indentations. Journal of Physics D: Applied Physics 41:7, pages 074005.
Crossref
Alessandro Spadoni & Massimo Ruzzene. (2007) Numerical and experimental analysis of the static compliance of chiral truss-core airfoils. Journal of Mechanics of Materials and Structures 2:5, pages 965-981.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.