Citations (59)
Keep up to date with the latest research on this topic with citation updates for this article.
Articles from other publishers (59)
Zhilong Dong, Xue-fang Xie, Wenchun Jiang, Yu Wan, Xiangnan Zhai & Xu Zhao. (2022) Microstructure-based multiscale and heterogeneous elasto-plastic properties of 2205 duplex stainless steel welded joints: Experimental and modeling. International Journal of Plasticity 159, pages 103474.
Crossref
Crossref
Ali Riza Durmaz, Erik Natkowski, Nikolai Arnaudov, Petra Sonnweber-Ribic, Stefan Weihe, Sebastian Münstermann, Chris Eberl & Peter Gumbsch. (2022) Micromechanical fatigue experiments for validation of microstructure-sensitive fatigue simulation models. International Journal of Fatigue 160, pages 106824.
Crossref
Crossref
A. Berger, J.-F. Witz, A. El Bartali, T. Sadat, N. Limodin, M. Dubar & D. Najjar. (2022)
Experimental investigation of early strain heterogeneities and localizations in polycrystalline
-Fe during monotonic loading
. International Journal of Plasticity 153, pages 103253.
Crossref
Crossref
Erik Natkowski, Ali Riza Durmaz, Petra Sonnweber-Ribic & Sebastian Münstermann. (2021) Fatigue lifetime prediction with a validated micromechanical short crack model for the ferritic steel EN 1.4003. International Journal of Fatigue 152, pages 106418.
Crossref
Crossref
A. R. Durmaz, N. Hadzic, T. Straub, C. Eberl & P. Gumbsch. (2021) Efficient Experimental and Data-Centered Workflow for Microstructure-Based Fatigue Data. Experimental Mechanics 61:9, pages 1489-1502.
Crossref
Crossref
Frederik Scherff, Jessica Gola, Sebastian Scholl, Kinshuk Srivastava, Thorsten Staudt, Dominik Britz, Frank Mücklich & Stefan Diebels. (2021) Numerical simulation of dual-phase steel based on real and virtual three-dimensional microstructures. Continuum Mechanics and Thermodynamics 33:5, pages 1989-2006.
Crossref
Crossref
Damien Colas, Eric Finot, Sylvain Flouriot, Samuel Forest, Matthieu Mazière & Thomas Paris. (2021) Experimental and Computational Approach to Fatigue Behavior of Polycrystalline Tantalum. Metals 11:3, pages 416.
Crossref
Crossref
Francisco-José Gallardo-Basile, Yannick Naunheim, Franz Roters & Martin Diehl. (2021) Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study. Materials 14:3, pages 691.
Crossref
Crossref
Brandon Runnels, Vinamra Agrawal, Weiqun Zhang & Ann Almgren. (2021) Massively parallel finite difference elasticity using block-structured adaptive mesh refinement with a geometric multigrid solver. Journal of Computational Physics 427, pages 110065.
Crossref
Crossref
Faisal Qayyum, Aqeel Afzal Chaudhry, Sergey Guk, Matthias Schmidtchen, Rudolf Kawalla & Ulrich Prahl. (2020) Effect of 3D Representative Volume Element (RVE) Thickness on Stress and Strain Partitioning in Crystal Plasticity Simulations of Multi-Phase Materials. Crystals 10:10, pages 944.
Crossref
Crossref
Fengxiang Lin, Qiwei Shi & Laurent Delannay. (2020) Microscopic heterogeneity of plastic strain and lattice rotation in partially recrystallized copper polycrystals. International Journal of Solids and Structures 184, pages 167-177.
Crossref
Crossref
Martin Diehl, Jörn Niehuesbernd & Enrico Bruder. (2019) Quantifying the Contribution of Crystallographic Texture and Grain Morphology on the Elastic and Plastic Anisotropy of bcc Steel. Metals 9:12, pages 1252.
Crossref
Crossref
Damien Colas, Eric Finot, Sylvain Flouriot, Samuel Forest, Matthieu Mazière & Thomas Paris. (2019) Local Ratcheting Phenomena in the Cyclic Behavior of Polycrystalline Tantalum. JOM 71:8, pages 2586-2599.
Crossref
Crossref
F. Roters, M. Diehl, P. Shanthraj, P. Eisenlohr, C. Reuber, S.L. Wong, T. Maiti, A. Ebrahimi, T. Hochrainer, H.-O. Fabritius, S. Nikolov, M. Friák, N. Fujita, N. Grilli, K.G.F. Janssens, N. Jia, P.J.J. Kok, D. Ma, F. Meier, E. Werner, M. Stricker, D. Weygand & D. Raabe. (2019) DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale. Computational Materials Science 158, pages 420-478.
Crossref
Crossref
Henry Proudhon, Nicolas Guéninchault, Samuel Forest & Wolfgang Ludwig. (2018) Incipient Bulk Polycrystal Plasticity Observed by Synchrotron In-Situ Topotomography. Materials 11:10, pages 2018.
Crossref
Crossref
Zhen Zhang, David Lunt, Hamidreza Abdolvand, Angus J. Wilkinson, Michael Preuss & Fionn P.E. Dunne. (2018) Quantitative investigation of micro slip and localization in polycrystalline materials under uniaxial tension. International Journal of Plasticity 108, pages 88-106.
Crossref
Crossref
Akhil Vijay, Neil Paulson & Farshid Sadeghi. (2018) A 3D finite element modelling of crystalline anisotropy in rolling contact fatigue. International Journal of Fatigue 106, pages 92-102.
Crossref
Crossref
Martin Diehl. (2017) Review and outlook: mechanical, thermodynamic, and kinetic continuum modeling of metallic materials at the grain scale. MRS Communications 7:4, pages 735-746.
Crossref
Crossref
E. Salvati & A.M. Korsunsky. (2017) An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling. International Journal of Plasticity 98, pages 123-138.
Crossref
Crossref
Konrad Perzynski & Lukasz Madej. (2016) Complex Hybrid Numerical Model in Application to Failure Modelling in Multiphase Materials. Archives of Computational Methods in Engineering 24:4, pages 869-890.
Crossref
Crossref
M. Diehl, D. An, P. Shanthraj, S. Zaefferer, F. Roters & D. Raabe. (2017) Crystal plasticity study on stress and strain partitioning in a measured 3D dual phase steel microstructure. Physical Mesomechanics 20:3, pages 311-323.
Crossref
Crossref
P.G. Luccarelli, G.J. Pataky, H. Sehitoglu & S. Foletti. (2017) Finite element simulation of single crystal and polycrystalline Haynes 230 specimens. International Journal of Solids and Structures 115-116, pages 270-278.
Crossref
Crossref
Adrien Guery, François Hild, Félix Latourte & Stéphane Roux. (2016) Identification of crystal plasticity parameters using DIC measurements and weighted FEMU. Mechanics of Materials 100, pages 55-71.
Crossref
Crossref
Hamidreza Abdolvand & Angus J. Wilkinson. (2016) On the effects of reorientation and shear transfer during twin formation: Comparison between high resolution electron backscatter diffraction experiments and a crystal plasticity finite element model. International Journal of Plasticity 84, pages 160-182.
Crossref
Crossref
S Dancette, A Browet, G Martin, M Willemet & L Delannay. (2016) Automatic processing of an orientation map into a finite element mesh that conforms to grain boundaries. Modelling and Simulation in Materials Science and Engineering 24:5, pages 055014.
Crossref
Crossref
Adrien Guery, François Hild, Félix Latourte & Stéphane Roux. (2016) Slip activities in polycrystals determined by coupling DIC measurements with crystal plasticity calculations. International Journal of Plasticity 81, pages 249-266.
Crossref
Crossref
Martin Diehl, Pratheek Shanthraj, Philip Eisenlohr & Franz Roters. (2015) Neighborhood influences on stress and strain partitioning in dual-phase microstructures. Meccanica 51:2, pages 429-441.
Crossref
Crossref
Wang Chow, Denis Solas, Guillaume Puel, Thierry Baudin & Véronique Aubin. (2015) Development of an in situ method for measuring elastic and total strain fields at the grain scale with an estimation of accuracy. Journal of Materials Science 51:3, pages 1234-1250.
Crossref
Crossref
L. Signor, P. Villechaise, T. Ghidossi, E. Lacoste, M. Gueguen & S. Courtin. (2016) Influence of local crystallographic configuration on microcrack initiation in fatigued 316LN stainless steel: Experiments and crystal plasticity finite elements simulations. Materials Science and Engineering: A 649, pages 239-249.
Crossref
Crossref
Duancheng Ma, Philip Eisenlohr, Eike Epler, Cynthia A. Volkert, Pratheek Shanthraj, Martin Diehl, Franz Roters & Dierk Raabe. (2016) Crystal plasticity study of monocrystalline stochastic honeycombs under in-plane compression. Acta Materialia 103, pages 796-808.
Crossref
Crossref
N.L. Phung, V. Favier & N. Ranc. (2015) Evaluating Schmid criterion for predicting preferential locations of persistent slip markings obtained after very high cycle fatigue for polycrystalline pure copper. International Journal of Fatigue 77, pages 115-127.
Crossref
Crossref
Reeju Pokharel, Jonathan Lind, Shiu Fai Li, Peter Kenesei, Ricardo A. Lebensohn, Robert M. Suter & Anthony D. Rollett. (2015) In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu. International Journal of Plasticity 67, pages 217-234.
Crossref
Crossref
H. Lim, J.D. Carroll, C.C. Battaile, T.E. Buchheit, B.L. Boyce & C.R. Weinberger. (2014) Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals. International Journal of Plasticity 60, pages 1-18.
Crossref
Crossref
J. Lind, S.F. Li, R. Pokharel, U. Lienert, A.D. Rollett & R.M. Suter. (2014) Tensile twin nucleation events coupled to neighboring slip observed in three dimensions. Acta Materialia 76, pages 213-220.
Crossref
Crossref
Giuseppe Pezzotti. (2014) Bioceramics for Hip Joints: The Physical Chemistry Viewpoint. Materials 7:6, pages 4367-4410.
Crossref
Crossref
Reeju PokharelJonathan LindAnand K. Kanjarla, Ricardo A. Lebensohn, Shiu Fai LiPeter Kenesei, Robert M. SuterAnthony D. Rollett. (2014) Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations. Annual Review of Condensed Matter Physics 5:1, pages 317-346.
Crossref
Crossref
F. Lavergne, R. Brenner & K. Sab. (2013) Effects of grain size distribution and stress heterogeneity on yield stress of polycrystals: A numerical approach. Computational Materials Science 77, pages 387-398.
Crossref
Crossref
Devin M. Pyle, Jing Lu, David J. Littlewood & Antoinette M. Maniatty. (2012) Effect of 3D grain structure representation in polycrystal simulations. Computational Mechanics 52:1, pages 135-150.
Crossref
Crossref
S.-H. Choi, E.-Y. Kim, W. Woo, S.H. Han & J.H. Kwak. (2013) The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension. International Journal of Plasticity 45, pages 85-102.
Crossref
Crossref
Hamidreza Abdolvand & Mark R. Daymond. (2013) Multi-scale modeling and experimental study of twin inception and propagation in hexagonal close-packed materials using a crystal plasticity finite element approach; part II: Local behavior. Journal of the Mechanics and Physics of Solids 61:3, pages 803-818.
Crossref
Crossref
Alberto Leonardi, Matteo Leoni & Paolo Scardi. (2013) Atomistic modelling of polycrystalline microstructures: An evolutional approach to overcome topological restrictions. Computational Materials Science 67, pages 238-242.
Crossref
Crossref
Y.S. Choi, M.A. Groeber, T.J. Turner, D.M. Dimiduk, C. Woodward, M.D. Uchic & T.A. Parthasarathy. (2012) A crystal-plasticity FEM study on effects of simplified grain representation and mesh types on mesoscopic plasticity heterogeneities. Materials Science and Engineering: A 553, pages 37-44.
Crossref
Crossref
Yan Li, Veronique Aubin, Colette Rey & Philippe Bompard. (2012) Polycrystalline numerical simulation of variable amplitude loading effects on cyclic plasticity and microcrack initiation in austenitic steel 304L. International Journal of Fatigue 42, pages 71-81.
Crossref
Crossref
Siddiq M. Qidwai, David M. Turner, Stephen R. Niezgoda, Alexis C. Lewis, Andrew B. Geltmacher, David J. Rowenhorst & Surya R. Kalidindi. (2012) Estimating the response of polycrystalline materials using sets of weighted statistical volume elements. Acta Materialia 60:13-14, pages 5284-5299.
Crossref
Crossref
P. L. Phillips, R. A. Brockman & R. John. (2011) Modelling Strategies for Property Identification Based on Full‐Field Surface Displacement Data. Strain 48:2, pages 143-152.
Crossref
Crossref
Samuel Forest. 2012. Generalized Continua and Dislocation Theory. Generalized Continua and Dislocation Theory
181
287
.
. 2011. Grain Boundaries and Crystalline Plasticity. Grain Boundaries and Crystalline Plasticity
109
163
.
Yoon Suk Choi & Robert A. A. Brockman. 2011. Computational Methods for Microstructure-Property Relationships. Computational Methods for Microstructure-Property Relationships
199
238
.
Ji Hoon Kim, M.G. Lee, D. Kim, D.K. Matlock & R.H. Wagoner. (2010) Hole-expansion formability of dual-phase steels using representative volume element approach with boundary-smoothing technique. Materials Science and Engineering: A 527:27-28, pages 7353-7363.
Crossref
Crossref
P. Evrard, A. El Bartali, V. Aubin, C. Rey, S. Degallaix & D. Kondo. (2010) Influence of boundary conditions on bi-phased polycrystal microstructure calculation. International Journal of Solids and Structures 47:16, pages 1979-1986.
Crossref
Crossref
H. Proudhon, N. Vaxelaire, S. Labat, S. Forest & O. Thomas. (2010) Finite element simulations of coherent diffraction in elastoplastic polycrystalline aggregates. Comptes Rendus Physique 11:3-4, pages 293-303.
Crossref
Crossref
N Vaxelaire, H Proudhon, S Labat, C Kirchlechner, J Keckes, V Jacques, S Ravy, S Forest & O Thomas. (2010)
Methodology for studying strain inhomogeneities in polycrystalline thin films during
in situ
thermal loading using coherent x-ray diffraction
. New Journal of Physics 12:3, pages 035018.
Crossref
Crossref
Ji Hoon Kim, Myoung-Gyu Lee & R.H. Wagoner. (2010) A boundary smoothing algorithm for image-based modeling and its application to micromechanical analysis of multi-phase materials. Computational Materials Science 47:3, pages 785-795.
Crossref
Crossref
T.R. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D.E. Mason, M.A. Crimp & D. Raabe. (2009) The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals. International Journal of Plasticity 25:9, pages 1655-1683.
Crossref
Crossref
R. Brenner, R.A. Lebensohn & O. Castelnau. (2009) Elastic anisotropy and yield surface estimates of polycrystals. International Journal of Solids and Structures 46:16, pages 3018-3026.
Crossref
Crossref
Filip Šiška, Daniel Weygand, Samuel Forest & Peter Gumbsch. (2009) Comparison of mechanical behaviour of thin film simulated by discrete dislocation dynamics and continuum crystal plasticity. Computational Materials Science 45:3, pages 793-799.
Crossref
Crossref
J.-M. Pipard, N. Nicaise, S. Berbenni, O. Bouaziz & M. Berveiller. (2009) A new mean field micromechanical approach to capture grain size effects. Computational Materials Science 45:3, pages 604-610.
Crossref
Crossref
Fabrice Barbe, Romain Quey, Lakhdar Taleb & Eduardo Souza de Cursi. (2008) Numerical modelling of the plasticity induced during diffusive transformation. An ensemble averaging approach for the case of random arrays of nuclei. European Journal of Mechanics - A/Solids 27:6, pages 1121-1139.
Crossref
Crossref
L. St-Pierre, E. Héripré, M. Dexet, J. Crépin, G. Bertolino & N. Bilger. (2008) 3D simulations of microstructure and comparison with experimental microstructure coming from O.I.M analysis. International Journal of Plasticity 24:9, pages 1516-1532.
Crossref
Crossref