Advanced search
Publication Cover
Philosophical Magazine Volume 94, 2014 - Issue 4
Submit an article Journal homepage
531
Views
25
CrossRef citations to date
0
Altmetric
Part A: Materials Science

A study of the hot and cold deformation of twin-roll cast magnesium alloy AZ31

Hesam AskariSchool of Mechanical and Materials Engineering, Washington State University, Pullman, WA, 99164-2920, USACorrespondence[email protected]
,
John YoungSchool of Mechanical and Materials Engineering, Washington State University, Pullman, WA, 99164-2920, USA
,
David FieldSchool of Mechanical and Materials Engineering, Washington State University, Pullman, WA, 99164-2920, USA
,
Ghassan KridliDepartment of Mechanical Engineering, Texas A&M University of Qatar, Doha, Qatar
,
Dongsheng LiPacific Northwest National Laboratory, Computational Sciences and Mathematics Division, P.O. Box 999, Richland, WA, 99352, USA
&
Hussein ZbibSchool of Mechanical and Materials Engineering, Washington State University, Pullman, WA, 99164-2920, USA
Pages 381-403 | Received 05 Apr 2013, Accepted 13 Sep 2013, Published online: 29 Oct 2013

Citations (25)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

Mehdi Hamid, Hao Lyu & Hussein Zbib. (2018) A dislocation-based stress-strain gradient plasticity model for strength and ductility in materials with gradient microstructures. Philosophical Magazine 98:32, pages 2896-2916.
Read now
G. Ayoub, A. K. Rodrigez, M. Shehadeh, G. Kridli, J. P. Young & H. Zbib. (2018) Modelling the rate and temperature-dependent behaviour and texture evolution of the Mg AZ31B alloy TRC sheets. Philosophical Magazine 98:4, pages 262-294.
Read now
Hao Lyu, Nasrin Taheri-Nassaj & Hussein M. Zbib. (2016) A multiscale gradient-dependent plasticity model for size effects. Philosophical Magazine 96:18, pages 1883-1908.
Read now
K. Suresh, C. Dharmendra, K. P. Rao, Y. V. R. K. Prasad & M. Gupta. (2015) Processing Map of AZ31-1Ca-1.5 vol.% Nano-Alumina Composite for Hot Working. Materials and Manufacturing Processes 30:10, pages 1161-1167.
Read now

Articles from other publishers (21)

Ali Al-Hadi I. Kobaissy, Georges Ayoub & Mutasem Shehadeh. (2022) Modeling of the tension-compression asymmetry reduction of ECAPed Mg-3Al-1Zn through grain fragmentation. Computational Materials Science 210, pages 111439.
Crossref
Mehdi Hamid, Maryam Jamalian, Natalia De Vincentis, Quentin Buck & David P. Field. (2022) Multiscale Modeling of the Strength and Ductility Paradox for High-Pressure Torsion Samples With Gradient Microstructure. Journal of Engineering Materials and Technology 144:1.
Crossref
Mehdi Hamid, M. Sadeq Saleh, Ali Afrouzian, Rahul Panat & Hussein M. Zbib. (2021) Modeling of porosity and grain size effects on mechanical behavior of additively manufactured structures. Additive Manufacturing 38, pages 101833.
Crossref
Sedigheh Mohamadnejad, Ali Basti & Reza Ansari. (2020) Analyses of Dislocation Effects on Plastic Deformation. Multiscale Science and Engineering 2:2-3, pages 69-89.
Crossref
Chenchen Zhi, Lifeng Ma, Weitao Jia, Xiaojiao Huo, Qinhong Fan, Zhiquan Huang, Qichi Le & Jinbao Lin. (2019) Dependence of deformation behaviors on temperature for twin-roll casted AZ31 alloy by processing maps. Journal of Materials Research and Technology 8:6, pages 5217-5232.
Crossref
Mehdi Hamid & Hussein M. Zbib. (2019) Dislocation Density-Based Multiscale Modeling of Deformation and Subgrain Texture in Polycrystals. JOM 71:11, pages 4136-4143.
Crossref
A.H. Kobaissy, G. Ayoub, L.S. Toth, S. Mustapha & M. Shehadeh. (2019) Continuum dislocation dynamics-based grain fragmentation modeling. International Journal of Plasticity 114, pages 252-271.
Crossref
S. Amir H. Motaman & Ulrich Prahl. (2019) Microstructural constitutive model for polycrystal viscoplasticity in cold and warm regimes based on continuum dislocation dynamics. Journal of the Mechanics and Physics of Solids 122, pages 205-243.
Crossref
Hao Lyu, Mehdi Hamid, Annie Ruimi & Hussein M. Zbib. (2017) Stress/strain gradient plasticity model for size effects in heterogeneous nano-microstructures. International Journal of Plasticity 97, pages 46-63.
Crossref
Mehdi Hamid, Hao Lyu, Ben Schuessler, Pui Wo & Hussein Zbib. (2017) Modeling and Characterization of Grain Boundaries and Slip Transmission in Dislocation Density-Based Crystal Plasticity. Crystals 7:6, pages 152.
Crossref
Hao Lyu, Annie Ruimi, David P. Field & Hussein M. Zbib. (2016) Plasticity in Materials with Heterogeneous Microstructures. Metallurgical and Materials Transactions A 47:12, pages 6608-6620.
Crossref
Nasrin Taheri-Nassaj & Hussein M. Zbib. (2016) A Mesoscale Model of Plasticity: Dislocation Dynamics and Patterning (One-Dimensional). Journal of Engineering Materials and Technology 138:4.
Crossref
Takayuki Hama, Yuhki Tanaka, Masato Uratani & Hirohiko Takuda. (2016) Deformation behavior upon two-step loading in a magnesium alloy sheet. International Journal of Plasticity 82, pages 283-304.
Crossref
Adrien Chapuis, Zhi-qiang Wang & Qing Liu. (2016) Influence of material parameters on modeling plastic deformation of Mg alloys. Materials Science and Engineering: A 655, pages 244-250.
Crossref
Zhi-qiang WANG, Adrien CHAPUIS & Qing LIU. (2015) Simulation of mechanical behavior of AZ31 magnesium alloy during twin-dominated large plastic deformation. Transactions of Nonferrous Metals Society of China 25:11, pages 3595-3603.
Crossref
H. Qiao, P.D. Wu, H. Wang, M.A. Gharghouri & M.R. Daymond. (2015) Evaluation of elastic–viscoplastic self-consistent polycrystal plasticity models for zirconium alloys. International Journal of Solids and Structures 71, pages 308-322.
Crossref
K.P. Rao, T. Zhong, Y.V.R.K. Prasad, K. Suresh & M. Gupta. (2015) Hot working mechanisms in DMD-processed versus cast AZ31–1 wt% Ca alloy. Materials Science and Engineering: A 644, pages 184-193.
Crossref
Hao Lyu, Annie Ruimi & Hussein M. Zbib. (2015) A dislocation-based model for deformation and size effect in multi-phase steels. International Journal of Plasticity 72, pages 44-59.
Crossref
Kai-Chieh Wu, Jien-Wei Yeh & Shou-Yi Chang. (2015) Refined microstructure and improved mechanical properties of high-ratio extruded AZ91?xSn magnesium alloy. Materials Chemistry and Physics 162, pages 757-763.
Crossref
Hesam Askari, Michael R. Maughan, Niaz Abdolrahim, Dinakar Sagapuram, David F. Bahr & Hussein M. Zbib. (2015) A stochastic crystal plasticity framework for deformation of micro-scale polycrystalline materials. International Journal of Plasticity 68, pages 21-33.
Crossref
K. Hazeli, H. Askari, J. Cuadra, F. Streller, R.W. Carpick, H.M. Zbib & A. Kontsos. (2015) Microstructure-sensitive investigation of magnesium alloy fatigue. International Journal of Plasticity 68, pages 55-76.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.