Citations (55)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Qiuliang Huang, Olena Volkova, Horst Biermann & Javad Mola. (2017) Tensile elongation of lean-alloy austenitic stainless steels: transformation-induced plasticity versus planar glide. Materials Science and Technology 33:10, pages 1224-1230.
Read now
Read now
Donato Firrao, Graziano Ubertalli & Emanuela Cordano. (1999) Was it a bomb?. Technology, Law and Insurance 4:1-2, pages 23-30.
Read now
Read now
Takeshi Mori & Hiroshi Fujita. (1983) Orientation dependence of slip deformation of the conjugate system in Cu-6 at.% Al single crystals. Philosophical Magazine A 47:3, pages 435-440.
Read now
Read now
Takeshi Mori & Hiroshi Fujita. (1982) Effect of dislocation structure on the flow stress in Cu-3 at.% Al single crystals. Philosophical Magazine A 46:1, pages 91-104.
Read now
Read now
Articles from other publishers (51)
Richa Gupta, M.J.N.V. Prasad & Prita Pant. (2023) Anisotropy in flow behaviour of directionally solidified Ni-based superalloy under compression at an elevated temperature. Materialia 32, pages 101920.
Crossref
Crossref
C. Sofras, J. Čapek, X. Li, C.C. Roth, C. Leinenbach, R.E. Logé, M. Strobl & E. Polatidis. (2023) Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion. Materials & Design, pages 112539.
Crossref
Crossref
Kaiju Lu, Ankur Chauhan, Dimitri Litvinov, Mike Schneider, Guillaume Laplanche & Jarir Aktaa. (2023) Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy. Journal of the Mechanics and Physics of Solids 180, pages 105419.
Crossref
Crossref
Jie Chen, Chuang Liu, Kewei Dong, Shuai Guan, Qipeng Wang, Xianfeng Zhang, Yong Peng, Jian Kong & Kehong Wang. (2023) Crystallographic orientation dependence of dynamic deformation behaviours in additively manufactured stainless steel. Journal of Materials Research and Technology 24, pages 6699-6712.
Crossref
Crossref
Guanghui Chen, Guang Xu, Horst Biermann & Javad Mola. (2022) Microstructure and mechanical properties of Co-added and Al-added austenitic stainless steels. Materials Science and Engineering: A 854, pages 143832.
Crossref
Crossref
C. Sofras, J. Čapek, A. Arabi-Hashemi, C. Leinenbach, M. Frost, K. An, R.E. Logé, M. Strobl & E. Polatidis. (2022) Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion. Materials & Design 219, pages 110789.
Crossref
Crossref
S. Picak, H.C. Yilmaz & I. Karaman. (2021) Simultaneous deformation twinning and martensitic transformation in CoCrFeMnNi high entropy alloy at high temperatures. Scripta Materialia 202, pages 113995.
Crossref
Crossref
Kaiju Lu, Ankur Chauhan, Mario Walter, Aditya Srinivasan Tirunilai, Mike Schneider, Guillaume Laplanche, Jens Freudenberger, Alexander Kauffmann, Martin Heilmaier & Jarir Aktaa. (2021) Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi. Scripta Materialia 194, pages 113667.
Crossref
Crossref
Changsheng Li, Kun Li, Jingbo Dong, Jikai Wang & Zhibao Shao. (2021) Mechanical behaviour and microstructure of Fe-20/27Mn–4Al-0.3C low magnetic steel at room and cryogenic temperatures. Materials Science and Engineering: A 809, pages 140998.
Crossref
Crossref
S. Picak, T. Wegener, S.V. Sajadifar, C. Sobrero, J. Richter, H. Kim, T. Niendorf & I. Karaman. (2021) On the low-cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure. Acta Materialia 205, pages 116540.
Crossref
Crossref
A. Nabizada, A. Zarei-Hanzaki, H.R. Abedi, M.H. Barati, P. Asghari-Rad & H.S. Kim. (2021) The high temperature mechanical properties and the correlated microstructure/ texture evolutions of a TWIP high entropy alloy. Materials Science and Engineering: A 802, pages 140600.
Crossref
Crossref
Guanghui Chen, Reza Rahimi, Guang Xu, Horst Biermann & Javad Mola. (2020) Impact of Al addition on deformation behavior of Fe–Cr–Ni–Mn–C austenitic stainless steel. Materials Science and Engineering: A 797, pages 140084.
Crossref
Crossref
Michael Hauser, Marco Wendler, Javad Mola, Olga Fabrichnaya, Olena Volkova & Andreas Weiß. 2020. Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites. Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites
651
678
.
Qiuliang Huang, Marco Wendler, Javad Mola, Andreas Weiß, Lutz Krüger & Olena Volkova. 2020. Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites. Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites
41
75
.
Xianglong Wang, Jose Alberto Muñiz-Lerma, Mohammad Attarian Shandiz, Oscar Sanchez-Mata & Mathieu Brochu. (2019) Crystallographic-orientation-dependent tensile behaviours of stainless steel 316L fabricated by laser powder bed fusion. Materials Science and Engineering: A 766, pages 138395.
Crossref
Crossref
I.V. Kireeva, Yu.I. Chumlyakov, Z.V. Pobedennaya, A.V. Vyrodova, I.V. Kuksgauzen & D.A. Kuksgauzen. (2018) Orientation and temperature dependence of a planar slip and twinning in single crystals of Al0.3CoCrFeNi high-entropy alloy. Materials Science and Engineering: A 737, pages 47-60.
Crossref
Crossref
Scott J. McCormack, Wei Wen, Elena V. Pereloma, Carlos N. Tomé, Azdiar A. Gazder & Ahmed A. Saleh. (2018) On the first direct observation of de-twinning in a twinning-induced plasticity steel. Acta Materialia 156, pages 172-182.
Crossref
Crossref
S.S. Cai, X.W. Li & N.R. Tao. (2018) Orientation dependence of deformation twinning in Cu single crystals. Journal of Materials Science & Technology 34:8, pages 1364-1370.
Crossref
Crossref
Yichong Zhang, Moucheng Li, Hongyun Bi, Jiaqing Gu, Dexiang Chen, E. Chang & Wei Zhang. (2018) Martensite transformation behavior and mechanical properties of cold-rolled metastable Cr-Mn-Ni-N austenitic stainless steels. Materials Science and Engineering: A 724, pages 411-420.
Crossref
Crossref
Javad Mola. 2017. Austenitic Stainless Steels - New Aspects. Austenitic Stainless Steels - New Aspects.
Tianyi Chen, Lizhen Tan, Zizhe Lu & Haixuan Xu. (2017) The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni. Acta Materialia 138, pages 83-91.
Crossref
Crossref
I.V. Kireeva, Yu.I. Chumlyakov, Z.V. Pobedennaya, I.V. Kuksgausen & I. Karaman. (2017) Orientation dependence of twinning in single crystalline CoCrFeMnNi high-entropy alloy. Materials Science and Engineering: A 705, pages 176-181.
Crossref
Crossref
Javad Mola, Christiane Ullrich, Buxiao Kuang, Reza Rahimi, Qiuliang Huang, David Rafaja & Roman Ritzenhoff. (2017) Austenitic Nickel- and Manganese-Free Fe-15Cr-1Mo-0.4N-0.3C Steel: Tensile Behavior and Deformation-Induced Processes between 298 K and 503 K (25 °C and 230 °C). Metallurgical and Materials Transactions A 48:3, pages 1033-1052.
Crossref
Crossref
Z. Wu, S.A. David, Z. Feng & H. Bei. (2016) Weldability of a high entropy CrMnFeCoNi alloy. Scripta Materialia 124, pages 81-85.
Crossref
Crossref
Michael Hauser, Marco Wendler, Olga Fabrichnaya, Olena Volkova & Javad Mola. (2016) Anomalous stabilization of austenitic stainless steels at cryogenic temperatures. Materials Science and Engineering: A 675, pages 415-420.
Crossref
Crossref
Reza Rahimi, Christiane Ullrich, David Rafaja, Horst Biermann & Javad Mola. (2016) Microstructural Evolution of an Al-Alloyed Duplex Stainless Steel During Tensile Deformation Between 77 K and 473 K (−196 °C and 200 °C). Metallurgical and Materials Transactions A 47:6, pages 2705-2716.
Crossref
Crossref
Arpan Das. (2015) Revisiting Stacking Fault Energy of Steels. Metallurgical and Materials Transactions A 47:2, pages 748-768.
Crossref
Crossref
Reza Rahimi, Christiane Ullrich, Volker Klemm, David Rafaja, Bruno C. De Cooman, Horst Biermann & Javad Mola. (2016) Influence of Al on the temperature dependence of strain hardening behavior and glide planarity in Fe–Cr–Ni–Mn–C austenitic stainless steels. Materials Science and Engineering: A 649, pages 301-312.
Crossref
Crossref
Hiroyasu Saka. (2015) Factors affecting the dissociation width of dissociated dislocations in FCC metals and alloys. Journal of Materials Science 51:1, pages 405-424.
Crossref
Crossref
Z. Wu, C.M. Parish & H. Bei. (2015) Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys. Journal of Alloys and Compounds 647, pages 815-822.
Crossref
Crossref
Z. Wu & H. Bei. (2015) Microstructures and mechanical properties of compositionally complex Co-free FeNiMnCr18 FCC solid solution alloy. Materials Science and Engineering: A 640, pages 217-224.
Crossref
Crossref
Hans Berns, Valentin Gavriljuk & Sascha RiednerHans Berns, Valentin Gavriljuk & Sascha Riedner. 2013. High Interstitial Stainless Austenitic Steels. High Interstitial Stainless Austenitic Steels
21
83
.
S.M. Teus, V.N. Shyvanyuk & V.G. Gavriljuk. (2008) Hydrogen-induced γ→ɛ transformation and the role of ɛ-martensite in hydrogen embrittlement of austenitic steels. Materials Science and Engineering: A 497:1-2, pages 290-294.
Crossref
Crossref
V.G. Gavriljuk, A.I. Tyshchenko, V.V. Bliznuk, I.L. Yakovleva, S. Riedner & H. Berns. (2008) Cold Work Hardening of High-Strength Austenitic Steels. steel research international 79:6, pages 413-422.
Crossref
Crossref
J. Talonen & H. Hänninen. (2007) Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels. Acta Materialia 55:18, pages 6108-6118.
Crossref
Crossref
T.-H. Lee, C.-S. Oh, S.-J. Kim & S. Takaki. (2007) Deformation twinning in high-nitrogen austenitic stainless steel. Acta Materialia 55:11, pages 3649-3662.
Crossref
Crossref
Donato Firrao, Paolo Matteis, Giorgio Scavino, Graziano Ubertalli, Maria G. Ienco, Gabriella Pellati, Paolo Piccardo, Maria R. Pinasco, Enrica Stagno, Girolamo Costanza, Roberto Montanari, Maria E. Tata, Giovanni Brandimarte & Santo Petralia. (2006) Metal Objects Mapping After Small Charge Explosions. A Study on AISI 304Cu Steel with Two Different Grain Sizes. Journal of Forensic Sciences 51:3, pages 520-531.
Crossref
Crossref
G.G. Yapici, I. Karaman, Z.P. Luo, H.J. Maier & Y.I. Chumlyakov. (2011) Microstructural refinement and deformation twinning during severe plastic deformation of 316L stainless steel at high temperatures. Journal of Materials Research 19:8, pages 2268-2278.
Crossref
Crossref
T.S Byun, N Hashimoto & K Farrell. (2004) Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels. Acta Materialia 52:13, pages 3889-3899.
Crossref
Crossref
T.S Byun, E.H Lee & J.D Hunn. (2003) Plastic deformation in 316LN stainless steel – characterization of deformation microstructures. Journal of Nuclear Materials 321:1, pages 29-39.
Crossref
Crossref
T.S. Byun. (2003) On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels. Acta Materialia 51:11, pages 3063-3071.
Crossref
Crossref
A.E. Ekinci, N. U�ar, G. �ankaya & B. D�zg�n. (2002) The Temperature Dependence of Work-Hardening Rate in Invar Fe-Ni Alloys. physica status solidi (a) 191:2, pages 387-390.
Crossref
Crossref
D.R. Lesuer, C.K. Syn, J.D. Whittenberger & O.D. Sherby. (2002) Flow stresses in metal laminates and pure metals during high temperature extrusion. International Journal of Plasticity 18:2, pages 155-184.
Crossref
Crossref
L. B. Zuev, S. A. Barannikova, V. I. Danilov, Yu. I. Chumlyakov & I. V. Kireeva. (1999) Deformation autowaves in nitrogen-doped γ-Fe single crystals. Technical Physics 44:10, pages 1179-1185.
Crossref
Crossref
Yu. I. Chumlyakov, I. V. Kireeva, A. D. Korotaev, E. I. Litvinova & Yu. L. Zuev. (1996) Mechanisms of plastic deformation, hardening, and fracture in single crystals of nitrogen-containing austenitic stainless steels. Russian Physics Journal 39:3, pages 189-210.
Crossref
Crossref
Yu. I. Chumlyakov & A. D. Korotaev. (1992) Physics of the plasticity and fracture of high-strength crystals. Russian Physics Journal 35:9, pages 783-799.
Crossref
Crossref
D. L. McDowell, O. K. Stahl, S. R. Stock & S. D. Antolovich. (1988) Biaxial path dependence of deformation substructure of type 304 stainless steel. Metallurgical Transactions A 19:5, pages 1277-1293.
Crossref
Crossref
Koji SHIBATA, Masahiko KOGITACheng-shu CHEN & Toshio FUJITA. (1988) The Effects of Carbon on Low Cycle Fatigue Softening of Austenitic Stainless Steels. Tetsu-to-Hagane 74:2, pages 373-379.
Crossref
Crossref
H. Conrad, P. Mazumdar, S. Wrinn & K. Bae. (1985) Effect of a coal liquefaction solvent on the fatigue of type 316 stainless steel at 300 K I: behavior and mechanisms in the low cycle regime. Materials Science and Engineering 76, pages 89-106.
Crossref
Crossref
�. S. Istomina. (1981) Dependence of strain hardening under linear and plane stress-state conditions on austenitic steel structural parameters. Strength of Materials 13:4, pages 482-487.
Crossref
Crossref
H.-J. Kestenbach, W. Krause & T.L. da Silveira. (1978) Creep of 316 stainless steel under high stresses. Acta Metallurgica 26:5, pages 661-670.
Crossref
Crossref