Citations (37)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
AndrewC. Laing, DonaldC. Cole & RichardP. Wells. (2013) Intervening on the Determinants of Mechanical Exposures: The Effects of a Redesigned Production System on Physical Demands and Worker Perceptions. IIE Transactions on Occupational Ergonomics and Human Factors 1:2, pages 128-139.
Read now
Read now
Deepti Sood, MauryA. Nussbaum & Kris Hager. (2007) Fatigue during prolonged intermittent overhead work: reliability of measures and effects of working height. Ergonomics 50:4, pages 497-513.
Read now
Read now
Dan Anton, Fredric Gerr, Alysha Meyers, ThomasM. Cook, JohnC. Rosecrance & Jonathan Reynolds. (2007) Effect of Aviation Snip Design and Task Height on Upper Extremity Muscular Activity and Wrist Posture. Journal of Occupational and Environmental Hygiene 4:2, pages 99-113.
Read now
Read now
D. Anton, J.C. Rosecrance, F. Gerr, L.A. Merlino & T.M. Cook. (2005) Effect of concrete block weight and wall height on electromyographic activity and heart rate of masons. Ergonomics 48:10, pages 1314-1330.
Read now
Read now
RobertG. Radwin, WilliamS. Marras & StevenA. Lavender. (2001) Biomechanical aspects of work-related musculoskeletal disorders. Theoretical Issues in Ergonomics Science 2:2, pages 153-217.
Read now
Read now
MEI LI LIN & ROBERT G. RADWIN. (1998) Agreement between a frequency-weighted filter for continuous biomechanical measurements of repetitive wrist flexion against a load and published psychophysical data. Ergonomics 41:4, pages 459-475.
Read now
Read now
SEOUNGYEON A. OH & ROBERT G. RADWIN. (1998) The influence of target torque and torque build-up time on physical stress in right angle nutrunner operation. Ergonomics 41:2, pages 188-206.
Read now
Read now
MEI LI LIN, ROBERT G. RADWIN & STOVER H. SNOOK. (1997) A single metric for quantifying biomechanical stress in repetitive motions and exertions. Ergonomics 40:5, pages 543-558.
Read now
Read now
ThomasJ. Armstrong. (1996) Control of Upper-Limb Cumulative Trauma Disorders. Applied Occupational and Environmental Hygiene 11:4, pages 275-281.
Read now
Read now
PAUL SMUTZ, ELAINE SERINA & DAVID REMPEL. (1994) A system for evaluating the effect of keyboard design on force, posture, comfort, and productivity. Ergonomics 37:10, pages 1649-1660.
Read now
Read now
SHERYLS. ULIN, THOMASJ. ARMSTRONG, STOVERH. SNOOK & W. MONROE KEYSERLING. (1993) Perceived exertion and discomfort associated with driving screws at various work locations and at different work frequencies. Ergonomics 36:7, pages 833-846.
Read now
Read now
SherylS. Ulin, StoverH. Snook, ThomasJ. Armstrong & GaryD. Herrin. (1992) Preferred Tool Shapes for Various Horizontal and Vertical Work Locations. Applied Occupational and Environmental Hygiene 7:5, pages 327-337.
Read now
Read now
Articles from other publishers (25)
Seyed Abolfazl Zakerian, Sadegh Masjoodi, Bahador Makkiabadi & Ali Arabian. (2022) An innovative sit-standing seat in urban buses: A new design to prevent falls and non-collision injuries. Work 72:2, pages 687-696.
Crossref
Crossref
Peng Yin, Liang Yang, Shengguan Qu & Chao Wang. (2020) Effects of a passive upper extremity exoskeleton for overhead tasks. Journal of Electromyography and Kinesiology 55, pages 102478.
Crossref
Crossref
Mary Beth Privitera, M. Robert Garfield & Daryle Gardner-Bonneau. 2019. Applied Human Factors in Medical Device Design. Applied Human Factors in Medical Device Design
85
115
.
Patricia M. Rosati, Jaclyn N. Chopp & Clark R. Dickerson. (2014) Investigating shoulder muscle loading and exerted forces during wall painting tasks: Influence of gender, work height and paint tool design. Applied Ergonomics 45:4, pages 1133-1139.
Crossref
Crossref
Sheila Krawczyk. 2012. Occupational Ergonomics. Occupational Ergonomics
173
203
.
Andris Freivalds. 2012. Occupational Ergonomics. Occupational Ergonomics
321
348
.
Yong-Ku Kong, Dae-Min Kim, Kyung-Sun Lee & Myung-Chul Jung. (2012) Comparison of comfort, discomfort, and continuum ratings of force levels and hand regions during gripping exertions. Applied Ergonomics 43:2, pages 283-289.
Crossref
Crossref
Arun Garg & Jay M. Kapellusch. (2011) Job Analysis Techniques for Distal Upper Extremity Disorders. Reviews of Human Factors and Ergonomics 7:1, pages 149-196.
Crossref
Crossref
Jia-Hua Lin & Raymond W. McGorry. (2009) Predicting subjective perceptions of powered tool torque reactions. Applied Ergonomics 40:1, pages 47-55.
Crossref
Crossref
Clark R. Dickerson, Kevin A. Rider & Don B. Chaffin. Merging Biomechanical Models of the Shoulder with Digital Human Modeling. Merging Biomechanical Models of the Shoulder with Digital Human Modeling.
Deepti Sood, Kristopher Hager & Maury A. Nussbaum. (2016) The Effects of Differing Overhead Heights on Shoulder Fatigue during a Repetitive Intermittent Task. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 46:13, pages 1081-1085.
Crossref
Crossref
Clark R. Dickerson & Don B. Chaffin. Exertion-Driven Strength Modeling of the Shoulder. Exertion-Driven Strength Modeling of the Shoulder.
Anil Mital & Asa Kilbom. 2000. Ergonomics Guidelines and Problem Solving. Ergonomics Guidelines and Problem Solving
217
231
.
Donald S. Bloswick, Tim Villnave & Brad Joseph. 1998. Sourcebook of Occupational Rehabilitation. Sourcebook of Occupational Rehabilitation
145
165
.
R.H. Westgaard & J. Winkel. (1997) Ergonomic intervention research for improved musculoskeletal health: A critical review. International Journal of Industrial Ergonomics 20:6, pages 463-500.
Crossref
Crossref
Seoungyeon A. Oh & Robert G. Radwin. (1997) The effects of power hand tool dynamics and workstation design on handle kinematics and muscle activity. International Journal of Industrial Ergonomics 20:1, pages 59-74.
Crossref
Crossref
David D. Wood, Donald L. Fisher & Robert O. Andres. (2016) Minimizing Fatigue during Repetitive Jobs: Optimal Work-Rest Schedules. Human Factors: The Journal of the Human Factors and Ergonomics Society 39:1, pages 83-101.
Crossref
Crossref
John Lim & Errol Hoffmann. (1997) Appreciation of the zone of convenient reach by naive operators performing an assembly task. International Journal of Industrial Ergonomics 19:3, pages 187-199.
Crossref
Crossref
Philip Harber, Paul Hsu & Weiling Chen. (1996) An "Atomic" Approach to Disability Assessment. Journal of Occupational & Environmental Medicine 38:4, pages 359-366.
Crossref
Crossref
Lawrence J.H. Schulze, Jerome J. Congleton, Rodger J. Koppa & R.Dale Huchingson. (1995) Effects of pneumatic screwdrivers and workstations on inexperienced and experienced operator performance. International Journal of Industrial Ergonomics 16:3, pages 175-189.
Crossref
Crossref
Zachary M. Pine, Esther Colbran & Robin Corpolongo. (1994) Reliability and Validity of the Beats Above Baseline Index: A New Measure of Task Difficulty. Archives of Physical Medicine and Rehabilitation 75:5, pages 545-550.
Crossref
Crossref
Sheryl S. Ulin, Thomas J. Armstrong, Stover H. Snook & W. Monroe-Keyserling. (1993) Examination of the effect of tool mass and work postures on perceived exertion for a screw driving task. International Journal of Industrial Ergonomics 12:1-2, pages 105-115.
Crossref
Crossref
Tony Cederqvist & Mats Lindberg. (1993) Screwdrivers and their use from a Swedish construction industry perspective. Applied Ergonomics 24:3, pages 148-157.
Crossref
Crossref
W.M. Keyserling, M. Brouwer & B.A. Silverstein. (1993) The effectiveness of a joint labor-management program in controlling awkward postures of the trunk, neck, and shoulders: Results of a field study. International Journal of Industrial Ergonomics 11:1, pages 51-65.
Crossref
Crossref
Anil Mital & Asa Kilbom. (1992) Design, selection and use of hand tools to alleviate trauma of the upper extremities: Part II — The scientific basis (knowledge base) for the guide. International Journal of Industrial Ergonomics 10:1-2, pages 7-21.
Crossref
Crossref