103
Views
53
CrossRef citations to date
0
Altmetric
Original Articles

Efficient One-Day Sampling of Mechanical Job Exposure Data—A Study Based on Upper Trapezius Activity in Cleaners and Office Workers

, , &
Pages 196-211 | Published online: 04 Jun 2010

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (14)

Dechristian França Barbieri, Luiz Augusto Brusaca, Svend Erik Mathiassen, Divya Srinivasan & Ana Beatriz Oliveira. (2022) Effects on variation in shoulder, forearm and low back muscle activity from combining seated computer work with other productive office tasks: results from a simulation study. Ergonomics 65:6, pages 815-827.
Read now
David I. Douphrate, Nathan B. Fethke, Matthew W. Nonnenmann, Anabel Rodriguez, Robert Hagevoort & David Gimeno Ruiz de Porras. (2017) Full-shift and task-specific upper extremity muscle activity among US large-herd dairy parlour workers. Ergonomics 60:8, pages 1042-1054.
Read now
Dechristian França Barbieri, Divya Srinivasan, Svend Erik Mathiassen, Helen Cristina Nogueira & Ana Beatriz Oliveira. (2015) The ability of non-computer tasks to increase biomechanical exposure variability in computer-intensive office work. Ergonomics 58:1, pages 50-64.
Read now
Tal Amasay & Andrew Karduna. (2013) Patient's Body Size Influences Dental Hygienist Shoulder Kinematics. IIE Transactions on Occupational Ergonomics and Human Factors 1:3, pages 153-165.
Read now
NathanB. Fethke, Fred Gerr, Dan Anton, JosephE. Cavanaugh & MarkT. Quickel. (2012) Variability in Muscle Activity and Wrist Motion Measurements Among Workers Performing Non-Cyclic Work. Journal of Occupational and Environmental Hygiene 9:1, pages 25-35.
Read now
J.M. Richter, S.E. Mathiassen, H.P. Slijper, E.A.B. Over & M.A. Frens. (2009) Differences in muscle load between computer and non-computer work among office workers. Ergonomics 52:12, pages 1540-1555.
Read now
Leon Straker & Svend Erik Mathiassen. (2009) Increased physical work loads in modern work – a necessity for better health and performance?. Ergonomics 52:10, pages 1215-1225.
Read now
Dwayne Van Eerd, Sheilah Hogg-Johnson, Anjali Mazumder, Donald Cole, Richard Wells & Anne Moore. (2009) Task exposures in an office environment: a comparison of methods. Ergonomics 52:10, pages 1248-1258.
Read now
J. Village, M. Koehoorn, S. Hossain & A. Ostry. (2009) Quantifying tasks, ergonomic exposures and injury rates among school custodial workers. Ergonomics 52:6, pages 723-734.
Read now
CatherineM. Trask, Kay Teschke, James Morrison, Peter Wallace Johnson, Judy Village & Mieke Koehoorn. (2008) How Long Is Long Enough? Evaluating Sampling Durations for Low Back EMG Assessment. Journal of Occupational and Environmental Hygiene 5:10, pages 664-670.
Read now
JudithE. Gold, Jung-Soon Park & Laura Punnett. (2006) Work routinization and implications for ergonomic exposure assessment. Ergonomics 49:1, pages 12-27.
Read now
J Unge, Gert-åke Hansson, K Ohlsson, C Nordander, A Axmon, J Winkel & S Skerfving. (2005) Validity of self-assessed reports of occurrence and duration of occupational tasks. Ergonomics 48:1, pages 12-24.
Read now
Therése Möller, Svend Erik Mathiassen, Helena Franzon & Steve Kihlberg. (2004) Job enlargement and mechanical exposure variability in cyclic assembly work. Ergonomics 47:1, pages 19-40.
Read now
Svend Erik Mathiassen, Therése Möller & Mikael Forsman. (2003) Variability in mechanical exposure within and between individuals performing a highly constrained industrial work task. Ergonomics 46:8, pages 800-824.
Read now

Articles from other publishers (39)

Alysha R. Meyers, Steven J. Wurzelbacher, Edward F. Krieg, Jessica G. Ramsey, Kenneth Crombie, Annette L. Christianson, Lian Luo & Susan Burt. (2021) Work-Related Risk Factors for Rotator Cuff Syndrome in a Prospective Study of Manufacturing and Healthcare Workers. Human Factors: The Journal of the Human Factors and Ergonomics Society 65:3, pages 419-434.
Crossref
Wonil Lee, Jia-Hua Lin, Ninica Howard & Stephen Bao. (2022) Methods for measuring physical workload among commercial cleaners: A scoping review. International Journal of Industrial Ergonomics 90, pages 103319.
Crossref
Slawomir Winiarski, Dorota Molek-Winiarska, Barbara Chomątowska, Tomasz Sipko & Mykola Dyvak. (2021) Added value of motion capture technology for occupational health and safety innovations. Human Technology 17:3.
Crossref
Denean M. Kelson, Svend Erik Mathiassen & Divya Srinivasan. (2019) Trapezius muscle activity variation during computer work performed by individuals with and without neck-shoulder pain. Applied Ergonomics 81, pages 102908.
Crossref
Joshua T. Kersten & Nathan B. Fethke. (2019) Radio frequency identification to measure the duration of machine-paced assembly tasks: Agreement with self-reported task duration and application in variance components analyses of upper arm postures and movements recorded over multiple days. Applied Ergonomics 75, pages 74-82.
Crossref
Helen Cristina Nogueira, Francisco Locks, Dechristian França Barbieri & Ana Beatriz Oliveira. (2018) How does the biomechanical exposure of the upper body in manual box handling differ from exposure in other tasks in the real industrial context?. International Journal of Industrial Ergonomics 68, pages 8-14.
Crossref
Denean Kelson, Divya Srinivasan & Svend Erik Mathiassen. (2018) Differences in trapezius muscle activation patterns in office workers with and without chronic neck-shoulder pain, as quantified through exposure variation analysis. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 62:1, pages 962-966.
Crossref
Jean A Pulido, Lope H Barrero, Svend Erik Mathiassen & Jack T Dennerlein. (2018) Correctness of Self-Reported Task Durations: A Systematic Review. Annals of Work Exposures and Health 62:1, pages 1-16.
Crossref
Andreas Holtermann, Vera Schellewald, Svend Erik Mathiassen, Nidhi Gupta, Andrew Pinder, Anne Punakallio, Kaj Bo Veiersted, Britta Weber, Esa-Pekka Takala, Francesco Draicchio, Henrik Enquist, Kevin Desbrosses, Maria Peñahora García Sanz, Marzena Malińska, María Villar, Michael Wichtl, Michaela Strebl, Mikael Forsman, Sirpa Lusa, Tomasz Tokarski, Peter Hendriksen & Rolf Ellegast. (2017) A practical guidance for assessments of sedentary behavior at work: A PEROSH initiative. Applied Ergonomics 63, pages 41-52.
Crossref
Katie Gant, Jorge Bohorquez & Christine K. Thomas. (2017) Long-term recording of electromyographic activity from multiple muscles to monitor physical activity of participants with or without a neurological disorder. Biomedical Engineering / Biomedizinische Technik 0:0.
Crossref
Markus Koch, Lars-Kristian Lunde, Tonje Gjulem, Stein Knardahl & Kaj Bo Veiersted. (2016) Validity of Questionnaire and Representativeness of Objective Methods for Measurements of Mechanical Exposures in Construction and Health Care Work. PLOS ONE 11:9, pages e0162881.
Crossref
Liyuan Tao, Lin Zeng, Kun Wu, Hua Zhang, Jiabing Wu, Yufeng Zhao, Nan Li & Yiming Zhao. (2016) Comparison of four task-based measurement indices with full-shift dosimetry in a complicated noise environment. International Journal of Industrial Ergonomics 53, pages 149-156.
Crossref
Dirk M. Ditchen, Rolf P. Ellegast, Tom Gawliczek, Bernd Hartmann & Monika A. Rieger. (2014) Occupational kneeling and squatting: development and validation of an assessment method combining measurements and diaries. International Archives of Occupational and Environmental Health 88:2, pages 153-165.
Crossref
D. Ng, C. McNee, J. Kieser & M. Farella. (2014) Neck and shoulder muscle activity during standardized work-related postural tasks. Applied Ergonomics 45:3, pages 556-563.
Crossref
. (2013) Statistical Performance of Observational Work Sampling for Assessment of Categorical Exposure Variables: A Simulation Approach Illustrated Using PATH Data. The Annals of Occupational Hygiene.
Crossref
Catherine Trask, Svend Erik Mathiassen, Jennie Jackson & Jens Wahlström. (2013) Data processing costs for three posture assessment methods. BMC Medical Research Methodology 13:1.
Crossref
Marina Ciccarelli, Leon Straker, Svend Erik Mathiassen & Clare Pollock. (2013) Variation in Muscle Activity Among Office Workers When Using Different Information Technologies at Work and Away From Work. Human Factors: The Journal of the Human Factors and Ergonomics Society 55:5, pages 911-923.
Crossref
Svend Erik Mathiassen, Per Liv & Jens Wahlström. (2013) Cost-efficient measurement strategies for posture observations based on video recordings. Applied Ergonomics 44:4, pages 609-617.
Crossref
Svend Erik Mathiassen, Jens Wahlström & Mikael Forsman. (2012) Bias and imprecision in posture percentile variables estimated from short exposure samples. BMC Medical Research Methodology 12:1.
Crossref
Marcus Yung, Svend Erik Mathiassen & Richard P. Wells. (2012) Variation of force amplitude and its effects on local fatigue. European Journal of Applied Physiology 112:11, pages 3865-3879.
Crossref
Brenda Lobb & Gregory R. Woods. (2012) In search of a representative sample of residential building work. Applied Ergonomics 43:5, pages 868-875.
Crossref
. (2012) The Influence of Ergonomic Devices on Mechanical Load during Patient Handling Activities in Nursing Homes. The Annals of Occupational Hygiene.
Crossref
D. C. Cole, C. Chen, S. Hogg-Johnson, D. Van Eerd, A. Mazumder & R. P. Wells. (2011) Multivariate, longitudinal analysis of the impact of changes in office work environments on surface electromyography measures. International Archives of Occupational and Environmental Health 85:5, pages 493-503.
Crossref
Svend Erik Mathiassen & Kristian Bolin. (2011) Optimizing cost-efficiency in mean exposure assessment - cost functions reconsidered. BMC Medical Research Methodology 11:1.
Crossref
. (2011) Theoretical and Empirical Efficiency of Sampling Strategies for Estimating Upper Arm Elevation. The Annals of Occupational Hygiene.
Crossref
Tal AmasayMichael Latteri & Andrew R. Karduna. (2010) In Vivo Measurement of Humeral Elevation Angles and Exposure Using a Triaxial Accelerometer. Human Factors: The Journal of the Human Factors and Ergonomics Society 52:6, pages 616-626.
Crossref
. (2010) Cost-Efficient Design of Occupational Exposure Assessment Strategies—A Review. The Annals of Occupational Hygiene.
Crossref
. (2010) Upper Arm Postures and Movements in Female Hairdressers across Four Full Working Days. The Annals of Occupational Hygiene.
Crossref
Barbara J. Burgel, Mary C. White, Marion Gillen & Niklas Krause. (2010) Psychosocial work factors and shoulder pain in hotel room cleaners. American Journal of Industrial Medicine 53:7, pages 743-756.
Crossref
Svend Erik Mathiassen & Victor Paquet. (2010) The ability of limited exposure sampling to detect effects of interventions that reduce the occurrence of pronounced trunk inclination. Applied Ergonomics 41:2, pages 295-304.
Crossref
Craig P. Conner & Curt B. Irwin. (2009) EMG and Heart Rate Used to Validate Ergonomic Benefits of a Bent-Handled Floor Finish Applicator. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 53:19, pages 1487-1491.
Crossref
Gert-Åke Hansson, Istvan Balogh, Kerstina Ohlsson, Lothy Granqvist, Catarina Nordander, Inger Arvidsson, Ingrid Åkesson, Jeannette Unge, Ralf Rittner, Ulf Strömberg & Staffan Skerfving. (2009) Physical workload in various types of work: Part I. Wrist and forearm. International Journal of Industrial Ergonomics 39:1, pages 221-233.
Crossref
Barbara A. Silverstein, Stephen S. Bao, Z Joyce Fan, Ninica Howard, Caroline Smith, Peregrin Spielholz, David Bonauto & Eira Viikari-Juntura. (2008) Rotator Cuff Syndrome: Personal, Work-Related Psychosocial and Physical Load Factors. Journal of Occupational & Environmental Medicine 50:9, pages 1062-1076.
Crossref
Richard Wells, Svend Erik Mathiassen, Lars Medbo & Jørgen Winkel. (2007) Time—A key issue for musculoskeletal health and manufacturing. Applied Ergonomics 38:6, pages 733-744.
Crossref
Inger Arvidsson, Gert-Åke Hansson, Svend Erik Mathiassen & Staffan Skerfving. (2006) Changes in physical workload with implementation of mouse-based information technology in air traffic control. International Journal of Industrial Ergonomics 36:7, pages 613-622.
Crossref
Svend Erik Mathiassen. (2006) Diversity and variation in biomechanical exposure: What is it, and why would we like to know?. Applied Ergonomics 37:4, pages 419-427.
Crossref
Karolina Kazmierczak, Svend Erik Mathiassen, Patrick Neumann & Jørgen Winkel. (2006) Observer reliability of industrial activity analysis based on video recordings. International Journal of Industrial Ergonomics 36:3, pages 275-282.
Crossref
Patrick G. Dempsey & Svend Erik Mathiassen. (2006) On the evolution of task-based analysis of manual materials handling, and its applicability in contemporary ergonomics. Applied Ergonomics 37:1, pages 33-43.
Crossref
William S. Marras & Robert G. Radwin. (2016) Biomechanical Modeling. Reviews of Human Factors and Ergonomics 1:1, pages 1-88.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.