571
Views
45
CrossRef citations to date
0
Altmetric
Articles

Performance and emission characteristics of diesel fuel produced from waste plastic oil obtained by catalytic pyrolysis of waste polypropylene

, &

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (5)

A. Pakiya Pradeep & S. Gowthaman. (2022) Combustion and emission characteristics of diesel engine fuelled with waste plastic oil – a review. International Journal of Ambient Energy 43:1, pages 1269-1287.
Read now
V. Gnanamoorthi & M. Murugan. (2022) Effect of DEE and MEA as additives on a CRDI diesel engine fueled with waste plastic oil blend. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 44:2, pages 5016-5031.
Read now
Nagarajan Sivathanu & Nagarajan Valai Anantham. (2020) Impact of multi-walled carbon nanotubes with waste fishing net oil on performance, emission and combustion characteristics of a diesel engine. Environmental Technology 41:28, pages 3670-3681.
Read now
Lihua Ye, Yefan Shi, Tianyu Liu, Qingming Zheng, Muhammad Muzamal Ashfaq, Chengwei Sun, Aiping Shi & Muhammad Ajmal. (2020) Study on emission and particulate matter characteristics from diesel engine fueled with n-pentanol/Fischer–Tropsch diesel. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 0:0, pages 1-17.
Read now
Kiran Raj Bukkarapu, D. Siva Gangadhar, Y. Jyothi & Prasad Kanasani. (2018) Management, conversion, and utilization of waste plastic as a source of sustainable energy to run automotive: a review. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 40:14, pages 1681-1692.
Read now

Articles from other publishers (40)

Amar Kumar Das, Shibaprasad Behera, Swopneswar Mohanty, Nilakantha Behera & Kirtiswarup Mohanty. (2023) Performance and emission characteristics analysis of a CI engine fueled with distilled pyrolytic waste plastic oil/ethanol/diesel blends. Environmental Science and Pollution Research.
Crossref
Bauyrzhan Biakhmetov, Abay Dostiyarov, Yong Sik Ok & Siming You. (2023) A review on catalytic pyrolysis of municipal plastic waste. WIREs Energy and Environment 12:6.
Crossref
Urban Žvar Baškovič, Tomaž Katrašnik, Gian Claudio Faussone, Miha Grilc & Tine Seljak. (2023) Ultra-low emission power generation utilizing chemically stabilized waste plastics pyrolysis oil in RCCI combustion concept. Journal of Environmental Management 344, pages 118711.
Crossref
F. Faisal, M.G. Rasul, M.I. Jahirul & Ashfaque Ahmed Chowdhury. (2023) Waste plastics pyrolytic oil is a source of diesel fuel: A recent review on diesel engine performance, emissions, and combustion characteristics. Science of The Total Environment 886, pages 163756.
Crossref
Priyaranjan Jena, Reetu Raj, Jeewan Vachan Tirkey & Ajeet Kumar. (2023) Experimental analysis and optimization of CI engine performance using waste plastic oil and diesel fuel blends. Journal of the Energy Institute 109, pages 101286.
Crossref
S. Kiran, M. Leenus Jesu Martin, Ankit Sonthalia & Edwin Geo Varuvel. (2023) Synergistic effect of hydrogen and waste lubricating oil on the performance and emissions of a compression ignition engine. International Journal of Hydrogen Energy 48:60, pages 23296-23307.
Crossref
Premdasu Nalluri, P. Premkumar & M.R. Ch Sastry. (2023) Experimental study on a computerised VCR diesel engine running on oil made by pyrolyzing waste plastic using Red mud as a catalyst. Green Analytical Chemistry 5, pages 100054.
Crossref
Moses Jeremiah Barasa Kabeyi & Oludolapo Akanni Olanrewaju. (2023) Review and Design Overview of Plastic Waste-to-Pyrolysis Oil Conversion with Implications on the Energy Transition. Journal of Energy 2023, pages 1-25.
Crossref
A.G.M.B. Mustayen, M.G. Rasul, X. Wang, M.A. Hazrat, M. Negnevitsky & M.I. Jahirul. (2023) Impact of waste-plastic-derived diesel on the performance and emission characteristics of a diesel engine under low load conditions. Energy Conversion and Management 283, pages 116936.
Crossref
Achyut Kumar Panda, Saroja Kumar Rout & Amar Kumar Das. (2023) Optimization of diesel engine performance and emission using waste plastic pyrolytic oil by ANN and its thermo-economic assessment. Environmental Science and Pollution Research.
Crossref
F. Faisal, M.G. Rasul, M.I. Jahirul & D. Schaller. (2023) Pyrolytic conversion of waste plastics to energy products: A review on yields, properties, and production costs. Science of The Total Environment 861, pages 160721.
Crossref
Premkumar Subramanian & Balaji Gnanasikamani. (2023) Study of 4A and 5A zeolite as a catalyst material in a catalytic converter for NO emission reduction in a CI engine. Environmental Science and Pollution Research 30:14, pages 41726-41740.
Crossref
Eka Srivastava, Sujeet Kesharvani, Anjali Agrawal & Gaurav Dwivedi. (2023) Binary blending of different types of biofuels with diesel, and study of engine performance, combustion and exhaust emission characteristics. Materials Today: Proceedings 78, pages 378-389.
Crossref
Vikas Sharma, Abul Kalam Hossain, Gareth Griffiths, Ganesh Duraisamy, Anand Krishnasamy, Vinu Ravikrishnan & José Ricardo Sodré. (2022) Plastic waste to liquid fuel: A review of technologies, applications, and challenges. Sustainable Energy Technologies and Assessments 53, pages 102651.
Crossref
A.V. Krishna Chaitanya & Dillip Kumar Mohanty. (2022) Experimental investigation on the combustion, performance and emission characteristics of 1-pentanol blended waste plastic oil in a CRDI engine with EGR. Energy 256, pages 124574.
Crossref
Amar Kumar Das, Santosh Kumar Sahu & Achyut Kumar Panda. (2022) Current status and prospects of alternate liquid transportation fuels in compression ignition engines: A critical review. Renewable and Sustainable Energy Reviews 161, pages 112358.
Crossref
Sambandam Padmanabhan, K. Giridharan, Balasubramaniam Stalin, Subramanian Kumaran, V. Kavimani, N. Nagaprasad, Leta Tesfaye Jule & Ramaswamy Krishnaraj. (2022) Energy recovery of waste plastics into diesel fuel with ethanol and ethoxy ethyl acetate additives on circular economy strategy. Scientific Reports 12:1.
Crossref
Manigandan Sekar, T.R. Praveenkumar, Veeman Dhinakaran, P. Gunasekar & Arivalagan Pugazhendhi. (2021) Combustion and emission characteristics of diesel engine fueled with nanocatalyst and pyrolysis oil produced from the solid plastic waste using screw reactor. Journal of Cleaner Production 318, pages 128551.
Crossref
Dipankar Saha, Abhijit Sinha & Bidesh Roy. (2021) Critical insights into the effects of plastic pyrolysis oil on emission and performance characteristics of CI engine. Environmental Science and Pollution Research 28:33, pages 44598-44621.
Crossref
Linh T. Tr. Nguyen, Gérrard Eddy Jai Poinern, Hanh T. Le, Tien A. Nguyen, Chien M. Tran & Zhong‐Tao Jiang. (2021) A LaFeO 3 supported natural‐clay‐mineral catalyst for efficient pyrolysis of polypropylene plastic material . Asia-Pacific Journal of Chemical Engineering 16:5.
Crossref
Amar Kumar DasSudhansu Sekhar Sahoo & Achyut Kumar Panda. (2021) Production of Waste Plastics Oil and Its Prospective Use in a Variable Compression CI Engine. Journal of Hazardous, Toxic, and Radioactive Waste 25:3.
Crossref
Ashiq Ahamed, Lili Liang, Wei Ping Chan, Preston Choon Kiat Tan, Nicklaus Tze Xuan Yip, Johan Bobacka, Andrei Veksha, Ke Yin & Grzegorz Lisak. (2021) In situ catalytic reforming of plastic pyrolysis vapors using MSW incineration ashes. Environmental Pollution 276, pages 116681.
Crossref
K. Venkatesan. (2021) Investigation on the performance and emissions profile of CI engine using cashew nut shell pyro oil–toluene–diesel blends. SN Applied Sciences 3:5.
Crossref
Khatha Wathakit, Ekarong Sukjit, Chalita Kaewbuddee, Somkiat Maithomklang, Niti Klinkaew, Pansa Liplap, Weerachai Arjharn & Jiraphon Srisertpol. (2021) Characterization and Impact of Waste Plastic Oil in a Variable Compression Ratio Diesel Engine. Energies 14:8, pages 2230.
Crossref
Amar Kumar Das, Manas Ranjan Padhi, Dulari Hansdah & Achyut Kumar Panda. (2020) Optimization of Engine Parameters and Ethanol Fuel Additive of a Diesel Engine Fuelled with Waste Plastic Oil Blended Diesel. Process Integration and Optimization for Sustainability 4:4, pages 465-479.
Crossref
Amar Kumar Das, Dulari Hansdah, Alok Kumar Mohapatra & Achyut Kumar Panda. (2020) Energy, exergy and emission analysis on a DI single cylinder diesel engine using pyrolytic waste plastic oil diesel blend. Journal of the Energy Institute 93:4, pages 1624-1633.
Crossref
Aklilu T. Habtewold, Demiss A. Ambie & Wondwossen B. Eremed. (2020) Solar assisted pyrolysis system for High-Density polyethylene plastic waste to fuel conversion. AIMS Energy 8:3, pages 455-473.
Crossref
Roger Ruan, Kuan Ding, Shiyu Liu, Peng Peng, Nan Zhou, Aoxi He, Paul Chen, Yanling Cheng, Yunpu Wang, Yuhuan Liu, Hanwu Lei, Min Addy & Kirk Cobb. 2020. Current Developments in Biotechnology and Bioengineering. Current Developments in Biotechnology and Bioengineering 263 297 .
Sivakumar Ellappan & Bridjesh Pappula. (2019) Utilization of unattended waste plastic oil as fuel in low heat rejection diesel engine. Sustainable Environment Research 29:1.
Crossref
D. Damodharan, B. Rajesh Kumar, K. Gopal, Melvin Victor De Poures & B. Sethuramasamyraja. (2019) Utilization of waste plastic oil in diesel engines: a review. Reviews in Environmental Science and Bio/Technology 18:4, pages 681-697.
Crossref
Chenniappan Chinnasamy, Palanisamy Tamilselvam & Rajamanickam Ranjith. (2019) Influence of aluminum oxide nanoparticle with different particle sizes on the working attributes of diesel engine fueled with blends of diesel and waste plastic oil. Environmental Science and Pollution Research 26:29, pages 29962-29977.
Crossref
Archit S. Ayodhya, Venkatesh T. Lamani, Parashuram Bedar & G.N. Kumar. (2018) Effect of exhaust gas recirculation on a CRDI engine fueled with waste plastic oil blend. Fuel 227, pages 394-400.
Crossref
Venkateswarlu Chintala, Praveen Godkhe, Shirish Phadtare, Medha Tadpatrikar, J.K. Pandey & Suresh Kumar. (2018) A comparative assessment of single cylinder diesel engine characteristics with plasto-oils derived from municipal mixed plastic waste. Energy Conversion and Management 166, pages 579-589.
Crossref
D. Damodharan, A.P. Sathiyagnanam, D. Rana, S. Saravanan, B. Rajesh Kumar & B. Sethuramasamyraja. (2018) Effective utilization of waste plastic oil in a direct injection diesel engine using high carbon alcohols as oxygenated additives for cleaner emissions. Energy Conversion and Management 166, pages 81-97.
Crossref
Pappula Bridjesh, Pitchaipillai Periyasamy, Arani Vijayarao Krishna Chaitanya & Narayanan Kannaiyan Geetha. (2018) MEA and DEE as additives on diesel engine using waste plastic oil diesel blends. Sustainable Environment Research 28:3, pages 142-147.
Crossref
D. Damodharan, A.P. Sathiyagnanam, D. Rana, B. Rajesh Kumar & S. Saravanan. (2018) Combined influence of injection timing and EGR on combustion, performance and emissions of DI diesel engine fueled with neat waste plastic oil. Energy Conversion and Management 161, pages 294-305.
Crossref
Mohd Fahmi Othman, Abdullah Adam, G. Najafi & Rizalman Mamat. (2017) Green fuel as alternative fuel for diesel engine: A review. Renewable and Sustainable Energy Reviews 80, pages 694-709.
Crossref
Mohanraj C., Senthilkumar T. & Chandrasekar M.. (2017) A review on conversion techniques of liquid fuel from waste plastic materials. International Journal of Energy Research 41:11, pages 1534-1552.
Crossref
Karthickeyan Viswanathan & Balamurugan Pasupathy. (2017) Studies on piston bowl geometries using single blend ratio of various non-edible oils. Environmental Science and Pollution Research 24:20, pages 17068-17080.
Crossref
D. Damodharan, A.P. Sathiyagnanam, D. Rana, B. Rajesh Kumar & S. Saravanan. (2017) Extraction and characterization of waste plastic oil (WPO) with the effect of n -butanol addition on the performance and emissions of a DI diesel engine fueled with WPO/diesel blends. Energy Conversion and Management 131, pages 117-126.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.