Citations (25)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (19)
Chung-Ho Chen & Chao-Yu Chou. (2022) Optimum specification limit coefficient setting based on the smaller-the-better quality characteristics. Journal of Statistics and Management Systems 25:8, pages 1889-1898.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2022) Optimum specification limit setting under the larger-the-better quality characteristics. Journal of Information and Optimization Sciences 43:4, pages 735-743.
Read now
Read now
Foivos Psarommatis, João Sousa, João Pedro Mendonça & Dimitris Kiritsis. (2022) Zero-defect manufacturing the approach for higher manufacturing sustainability in the era of industry 4.0: a position paper. International Journal of Production Research 60:1, pages 73-91.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2021) Optimal process mean, specification limits, replenishment cycle time, and credit period for the buyer-seller model with specified capability value. Journal of Information and Optimization Sciences 42:4, pages 845-854.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2020) Optimal process mean setting under the trade-off model with exponential quality characteristic. Journal of Information and Optimization Sciences 41:8, pages 1781-1787.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2020) The integrated quality control model with product inspection and process improvement. Quality Technology & Quantitative Management 17:6, pages 646-660.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2020) The integrated study for process improvement with economic specification limits, process means setting and quality investment: an extension of the model in Abdul-Kader et al. (2010). Quality Technology & Quantitative Management 17:6, pages 627-645.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2020) Optimal process mean setting with asymmetric quadratic quality loss and process adjustment cost based on exponential product characteristic. Journal of Statistics and Management Systems 23:4, pages 809-816.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2020) Optimal process mean selection by considering trade-off model with product quality loss and process adjustment cost. Journal of Statistics and Management Systems 23:4, pages 817-825.
Read now
Read now
Mohammad Rezaei-Malek, Mehrdad Mohammadi, Jean-Yves Dantan, Ali Siadat & Reza Tavakkoli-Moghaddam. (2019) A review on optimisation of part quality inspection planning in a multi-stage manufacturing system. International Journal of Production Research 57:15-16, pages 4880-4897.
Read now
Read now
Chung-Ho Chen & Chao-Yu Chou. (2019) Process quality improvement based on the application of rectifying sampling inspection plan. Journal of Industrial and Production Engineering 36:4, pages 205-211.
Read now
Read now
Chung-Ho Chen. (2018) Optimal process mean setting under the quality and cost. Journal of Statistics and Management Systems 21:5, pages 807-815.
Read now
Read now
Chung-Ho Chen & Chao-Chin Kan. (2015) Tolerance design based on specified process capability value. International Journal of Management Science and Engineering Management 10:3, pages 210-214.
Read now
Read now
Chung-Ho Chen, Chao-Yu Chou, Chao-Chin Kan & Michael B. C. Khoo. (2014) Production quantity and specification limits settings by considering specified process capability value. Journal of Industrial and Production Engineering 31:4, pages 229-237.
Read now
Read now
Chung-Ho Chen, Chao-Yu Chou & Chao-Chin Kan. (2014) Economic specification limits and process mean settings by considering unequal target value and specification center. Journal of Industrial and Production Engineering 31:4, pages 199-205.
Read now
Read now
Yisha Xiang, DavidW. Coit & Qianmei Feng. (2013)
n Subpopulations experiencing stochastic degradation: reliability modeling, burn-in, and preventive replacement optimization. IIE Transactions 45:4, pages 391-408.
Read now
Read now
Chung-Ho Chen & Chi-Pin Hsu. (2011) The optimum settings for order quantity, process quality level, and warranty period. International Journal of Management Science and Engineering Management 6:3, pages 173-182.
Read now
Read now
Qianmei (May) Feng, Hande Sahin & MarvinJ. Karson. (2009) Bayesian analysis models for aviation baggage screening. IIE Transactions 41:11, pages 995-1006.
Read now
Read now
Chung-Ho Chen & Michael
B.C. Khoo. (2008) JOINT DETERMINATION OF OPTIMUM PROCESS MEAN AND ECONOMIC SPECIFICATION LIMITS FOR RECTIFYING INSPECTION PLAN WITH INSPECTION ERROR. Journal of the Chinese Institute of Industrial Engineers 25:5, pages 389-398.
Read now
Read now
Articles from other publishers (6)
Reza Askari, Mohammad Vahid Sebt & Alireza Amjadian. 2021. Logistics and Supply Chain Management. Logistics and Supply Chain Management
161
193
.
Chung-Ho Chen & Chao-Yu Chou. (2017) Optimum process mean, standard deviation and specification limits settings under the Burr distribution. Engineering Computations 34:1, pages 66-76.
Crossref
Crossref
Qianmei Feng, Hao Peng & David W. Coit. (2010) A degradation-based model for joint optimization of burn-in, quality inspection, and maintenance: a light display device application. The International Journal of Advanced Manufacturing Technology 50:5-8, pages 801-808.
Crossref
Crossref
Qianmei Feng, Hande Sahin & Kailash C. Kapur. (2009) Designing airport checked-baggage-screening strategies considering system capability and reliability. Reliability Engineering & System Safety 94:2, pages 618-627.
Crossref
Crossref
Qianmei Feng & Kailash C. Kapur. (2008) Selection of optimal precision levels and specifications considering measurement error. The International Journal of Advanced Manufacturing Technology 40:9-10, pages 960-970.
Crossref
Crossref
Qianmei Feng & Kailash C. Kapur. 2008. Handbook of Performability Engineering. Handbook of Performability Engineering
171
186
.