Citations (78)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Mohammad Taufik & Prashant K. Jain. (2023) On the achieving uniform finishing allowance through identifying shape deviation for additive manufacturing. Australian Journal of Mechanical Engineering 21:2, pages 480-498.
Read now
Read now
Vishal Francis, Sahil Garg, Kuldeep Kumar Saxena, Prashant K. Jain, Jayahari Lade & Deepak Kumar. (2022) Effect of chemical and heat treatment on 3D printed parts: nanoparticles embedment approach. Advances in Materials and Processing Technologies 8:sup4, pages 2277-2288.
Read now
Read now
Biao Wang, Yankun Chen, Tongqing Qu & Fengmei Li. (2021) Structure and Properties of Multi-walled Carbon Nanotube/Acrylonitrile Butadiene Styrene Nanocomposite Specimens Prepared by Fused Deposition Modeling. Journal of Macromolecular Science, Part B 60:2, pages 77-87.
Read now
Read now
Jin Zhu, Jian Zhang, Jindao Wang & Biao Wang. (2018) Compatibilizer Assistant SCF/ABS Composites with Improved Mechanical Properties Prepared by Fused Deposition Modeling. Polymer-Plastics Technology and Engineering 57:15, pages 1576-1584.
Read now
Read now
Vishal Francis & Prashant K. Jain. (2018) Investigation on the effect of surface modification of 3D printed parts by nanoclay and dimethyl ketone. Materials and Manufacturing Processes 33:10, pages 1080-1092.
Read now
Read now
Manu Srivastava & Sandeep Rathee. (2018) Optimisation of FDM process parameters by Taguchi method for imparting customised properties to components. Virtual and Physical Prototyping 13:3, pages 203-210.
Read now
Read now
Mazyar Yosofi, Olivier Kerbrat & Pascal Mognol. (2018) Energy and material flow modelling of additive manufacturing processes. Virtual and Physical Prototyping 13:2, pages 83-96.
Read now
Read now
Krishna P. Motaparti, Gregory Taylor, Ming C. Leu, K. Chandrashekhara, James Castle & Mike Matlack. (2017) Experimental investigation of effects of build parameters on flexural properties in fused deposition modelling parts. Virtual and Physical Prototyping 12:3, pages 207-220.
Read now
Read now
Vishal Francis & Prashant K. Jain. (2017) 3D printed polymer dielectric substrates with enhanced permittivity by nanoclay inclusion. Virtual and Physical Prototyping 12:2, pages 107-115.
Read now
Read now
N. Mohan, P. Senthil, S. Vinodh & N. Jayanth. (2017) A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual and Physical Prototyping 12:1, pages 47-59.
Read now
Read now
Articles from other publishers (68)
Ashutosh Kumar Gupta, Krishnanand & Mohammad Taufik. (2023) Effect of process parameters on performances measured in filament and pellets-based additively manufactured parts. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Crossref
Md Aftab Alam, Krishnanand, Abhishek Patel, Rajesh Purohit & Mohammad Taufik. (2022) Thermal analysis for improvement of mechanical properties in fused filament fabricated parts. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:2, pages 603-635.
Crossref
Crossref
N. Hemanth Kumar, H. Adarsha, R. Keshavamurthy & N. Kapilan. (2023) Influence of Carbon Nano fibre Addition on Mechanical Behaviour of PLA Based 3D Printed Polymer Nano composites. Journal of The Institution of Engineers (India): Series D.
Crossref
Crossref
Marwan Algellay, Matthew Roberts, Lucy Bosworth, Satyajit D. Sarker, Amos A. Fatokun & Touraj Ehtezazi. (2023) The Use of Micro-Ribbons and Micro-Fibres in the Formulation of 3D Printed Fast Dissolving Oral Films. Pharmaceuticals 16:1, pages 79.
Crossref
Crossref
Rahul Kumar Choubey, Gourav Kumar Sharma & Prashant Kumar Jain. 2023. Recent Advances in Manufacturing and Thermal Engineering. Recent Advances in Manufacturing and Thermal Engineering
249
259
.
Sodagudi Francis XavierS.F. Xavier. 2022. Thermoplastic Polymer Composites. Thermoplastic Polymer Composites
545
786
.
Soran Hassanifard & Kamran Behdinan. (2022) Effects of voids and raster orientations on fatigue life of notched additively manufactured PLA components. The International Journal of Advanced Manufacturing Technology 120:9-10, pages 6241-6250.
Crossref
Crossref
Gourav K Sharma, Piyush Pant, Prashant K Jain, Pavan K Kankar & Puneet Tandon. (2021) Numerical and experimental analysis of heat transfer in inductive conduction based wire metal deposition process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:5, pages 2395-2407.
Crossref
Crossref
Trivedi Achyut & Pavan Kumar Gurrala. (2022) AI in AM: An experimental investigation using adaptive neuro-Fuzzy interface system as a prediction tool. Materials Today: Proceedings 62, pages 7142-7147.
Crossref
Crossref
Narendra Kumar, Piyush D. Ukey, Vishal Francis, Ravi Pratap Singh & Sonika Sahu. 2022. Polymers for 3D Printing. Polymers for 3D Printing
307
323
.
Mohd Shoeb, Lokesh Kumar, Abid Haleem & Mohd Javaid. 2022. Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020). Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)
491
503
.
Abdul Dhiraj Hussain, Neeraj Radhakrishnan, Mohammed Sarfas & Vishal Francis. 2022. Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020). Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)
283
299
.
Surendra Singh Dewada & Amit Telang. (2021) A review of recently developed polymer composite materials for fused deposition modeling 3D printing. Materials Research Express 8:12, pages 122001.
Crossref
Crossref
Vigneshwaran Shanmugam, Munagoti Venkata Pavan, Karthik Babu & Balamurugan Karnan. (2021) Fused deposition modeling based polymeric materials and their performance: A review. Polymer Composites 42:11, pages 5656-5677.
Crossref
Crossref
Gourav K Sharma, Piyush Pant, Prashant K Jain, Pavan K Kankar & Puneet Tandon. (2021) Analysis of novel induction heating extruder for additive manufacturing using aluminum filament. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:12, pages 1961-1970.
Crossref
Crossref
Su-Mei Huang, Jiunn-Jer Hwang, Hsin-Jiant Liu & An-Miao Zheng. (2021) A Characteristic Study of Polylactic Acid/Organic Modified Montmorillonite (PLA/OMMT) Nanocomposite Materials after Hydrolyzing. Crystals 11:4, pages 376.
Crossref
Crossref
Diogo José Horst & Pedro Paulo Andrade Junior. 2021. Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials. Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials
1725
1742
.
Madheswaran Subramaniyan, Sivakumar Karuppan, Prakash Eswaran, Anandhamoorthy Appusamy & A. Naveen Shankar. (2021) State of art on fusion deposition modeling machines process parameter optimization on composite materials. Materials Today: Proceedings 45, pages 820-827.
Crossref
Crossref
Bankole I. Oladapo, Aderogba V. Adebiyi & E. Ifeoluwa Elemure. (2021) Microstructural 4D printing investigation of ultra-sonication biocomposite polymer. Journal of King Saud University - Engineering Sciences 33:1, pages 54-60.
Crossref
Crossref
T.C. Mokhena, V.C. Agbakoba, A. Mtibe & M.J. John. 2021. Handbook of Polymer Nanocomposites for Industrial Applications. Handbook of Polymer Nanocomposites for Industrial Applications
687
708
.
Payam Zarrintaj, Henri Vahabi, Tomy J. Gutiérrez, Mehrshad Mehrpouya, Mohammad Reza Ganjali & Mohammad Reza Saeb. 2021. Handbook of Polymer Nanocomposites for Industrial Applications. Handbook of Polymer Nanocomposites for Industrial Applications
675
685
.
Carmen M. González-Henríquez, Mauricio A. Sarabia-Vallejos & Juan Rodríguez-Hernández. 2021. Handbook of Polymer Nanocomposites for Industrial Applications. Handbook of Polymer Nanocomposites for Industrial Applications
633
673
.
Vishal Francis, Sushil Kumar Singh, Raksha G. Bhonde, Yash H. Tichkule, Vaishnavi S. Gupta & Swaraj P. Farande. 2021. Advances in Industrial and Production Engineering. Advances in Industrial and Production Engineering
861
868
.
Mir Irfan Ul Haq, Ankush Raina, Mariyam Jameelah Ghazali, Mohd Javaid & Abid Haleem. 2021. Tribology of Polymer and Polymer Composites for Industry 4.0. Tribology of Polymer and Polymer Composites for Industry 4.0
193
210
.
Olga Ponomarenko, Igor Grimzin, Nataliia Yevtushenko, Tatiana Lysenko & Dmytro Marynenko. 2021. Advances in Design, Simulation and Manufacturing IV. Advances in Design, Simulation and Manufacturing IV
565
574
.
Yuxuan Wang, Yonghui Zhou, Lanying Lin, Jorge Corker & Mizi Fan. (2020) Overview of 3D additive manufacturing (AM) and corresponding AM composites. Composites Part A: Applied Science and Manufacturing 139, pages 106114.
Crossref
Crossref
Youquan Wen, Yijun Xiong, Fen Zhang, Chao Jiang, Chunqi Wang, Zuojuan Du, Guanyuan Wang, Zeyu Wang & Xiaozhong Huang. (2020) Enhancement of mechanical properties of metamaterial absorber based on selective laser sintering and infiltration techniques. Composites Communications 21, pages 100373.
Crossref
Crossref
E. Gökçe Bahçegül, Erinç Bahçegül & Necati Özkan. (2020) 3D Printing of Hemicellulosic Biopolymers Extracted from Lignocellulosic Agricultural Wastes. ACS Applied Polymer Materials 2:7, pages 2622-2632.
Crossref
Crossref
S.I. Sing & W.Y. Yeong. 2020. Additive Manufacturing Processes. Additive Manufacturing Processes
152
163
.
Penumuru Kumar, Arumugam Mahamani & B. Durga Prasad. (2020) Additive Manufacturing - A Literature Review. Materials Science Forum 979, pages 74-83.
Crossref
Crossref
Vishal Francis & Prashant K Jain. (2018) Effect of stage-dependent addition of nanoparticles in additive manufacturing. Journal of Thermoplastic Composite Materials 33:3, pages 357-376.
Crossref
Crossref
Sithiprumnea Dul, Luca Fambri & Alessandro Pegoretti. 2020. Structure and Properties of Additive Manufactured Polymer Components. Structure and Properties of Additive Manufactured Polymer Components
17
59
.
Vishal Francis, Piyush Ukey, Ankit Nayak, Mohammad Taufik, Prashant K. Jain, Sushil H. Mankar & Sushant S. Srivastava. 2020. Advances in Materials Processing. Advances in Materials Processing
269
278
.
Jie Leng, Junjie Wu, Ning Chen, Xiang Xu & Jie Zhang. (2019) The development of a conical screw-based extrusion deposition system and its application in fused deposition modeling with thermoplastic polyurethane. Rapid Prototyping Journal 26:2, pages 409-417.
Crossref
Crossref
Hyun-Hee Choi, Eun-Hee Kim, Hye-Ju Lee, Bong-Gu Kim, Yeon-Gil Jung & Jing Zhang. (2019) Improvement in the hygroscopicity of inorganic binder through a dual coating process. Progress in Organic Coatings 135, pages 306-312.
Crossref
Crossref
Lan Chen & Xinzhou Zhang. (2019) Modification the surface quality and mechanical properties by laser polishing of Al/PLA part manufactured by fused deposition modeling. Applied Surface Science.
Crossref
Crossref
Ali Nadernezhad, Serkan Unal, Navid Khani & Bahattin Koc. (2019) Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites. The International Journal of Advanced Manufacturing Technology 102:5-8, pages 2119-2132.
Crossref
Crossref
Amy M. Peterson. (2019) Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective. Additive Manufacturing 27, pages 363-371.
Crossref
Crossref
Imran Khan, Christina S. Kamma-Lorger, Saeed D. Mohan, Artur Mateus & Geoffrey R. Mitchell. (2019) The Exploitation of Polymer Based Nanocomposites for Additive Manufacturing: A Prospective Review. Applied Mechanics and Materials 890, pages 113-145.
Crossref
Crossref
Tianyun Yao, Zichen Deng, Kai Zhang & Shiman Li. (2019) A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations. Composites Part B: Engineering 163, pages 393-402.
Crossref
Crossref
Diogo José Horst & Pedro Paulo Andrade Junior. (2019) 3D-Printed Conductive Filaments Based on Carbon Nanostructures Embedded in a Polymer Matrix. International Journal of Applied Nanotechnology Research 4:1, pages 26-40.
Crossref
Crossref
Masoumeh Pourali & Amy M. Peterson. 2019. Polymer-Based Additive Manufacturing: Recent Developments. Polymer-Based Additive Manufacturing: Recent Developments
115
130
.
Mohammad Taufik & Prashant K. Jain. 2019. 3D Printing and Additive Manufacturing Technologies. 3D Printing and Additive Manufacturing Technologies
59
71
.
Dorottya Nagy & Eszter Kókai. (2018) Polymer-based nanocomposites with nanoclay. IOP Conference Series: Materials Science and Engineering 448, pages 012021.
Crossref
Crossref
Narendra Kumar, Prashant K. Jain, Puneet Tandon & Pulak Mohan Pandey. (2018) The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA). Journal of Manufacturing Processes 35, pages 317-326.
Crossref
Crossref
Shreyas Shah, MD Nahin Islam Shiblee, Julkarnyne M. Habibur Rahman, Samiul Basher, Sajjad Husain Mir, Masaru Kawakami, Hidemitsu Furukawa & Ajit Khosla. (2018) 3D printing of electrically conductive hybrid organic–inorganic composite materials. Microsystem Technologies 24:10, pages 4341-4345.
Crossref
Crossref
Jordana Gonçalves, Patrícia Lima, Beate Krause, Petra Pötschke, Ugo Lafont, José Gomes, Cristiano Abreu, Maria Paiva & José Covas. (2018) Electrically Conductive Polyetheretherketone Nanocomposite Filaments: From Production to Fused Deposition Modeling. Polymers 10:8, pages 925.
Crossref
Crossref
V Francis & P K Jain. (2018) Surface enhancement approach for FDM rapid prototypes by organically modified montmorillonite nanoparticles. IOP Conference Series: Materials Science and Engineering 383, pages 012010.
Crossref
Crossref
Vishal Francis & Prashant K. Jain. (2018) A filament modification approach for in situ ABS/OMMT nanocomposite development in extrusion-based 3D printing. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:7.
Crossref
Crossref
Lu Wang, Douglas J. Gardner & Douglas W. Bousfield. (2018) Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties. Polymer Engineering & Science 58:5, pages 793-801.
Crossref
Crossref
Baris Kaynak, Martin Spoerk, Anuja Shirole, Wolfgang Ziegler & Janak Sapkota. (2018) Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing. Macromolecular Materials and Engineering 303:5, pages 1800037.
Crossref
Crossref
Chee Chua, Wai Yeong & Jia An. (2018) Special Issue: NextGen Materials for 3D Printing. Materials 11:4, pages 555.
Crossref
Crossref
Yehia Ibrahim, Garrett W. Melenka & Roger Kempers. (2018) Additive manufacturing of Continuous Wire Polymer Composites. Manufacturing Letters 16, pages 49-51.
Crossref
Crossref
M. Rosa, C. Barou & V. Esposito. (2018) Zirconia UV-curable colloids for additive manufacturing via hybrid inkjet printing-stereolithography. Materials Letters 215, pages 214-217.
Crossref
Crossref
Narendra Kumar, Prashant Kumar Jain, Puneet Tandon & Pulak M. Pandey. (2018) Extrusion-based additive manufacturing process for producing flexible parts. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:3.
Crossref
Crossref
Bilal Khatri, Karl Lappe, Dorit Noetzel, Kilian Pursche & Thomas Hanemann. (2018) A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization. Materials 11:2, pages 189.
Crossref
Crossref
Syed A.M. Tofail, Elias P. Koumoulos, Amit Bandyopadhyay, Susmita Bose, Lisa O’Donoghue & Costas Charitidis. (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Materials Today 21:1, pages 22-37.
Crossref
Crossref
Hyun-Hee Choi, Eun-Hee Kim, Hye-Yeong Park, Geun-Ho Cho, Yeon-Gil Jung & Jing Zhang. (2017) Application of dual coating process and 3D printing technology in sand mold fabrication. Surface and Coatings Technology 332, pages 522-526.
Crossref
Crossref
Hye-Yeong Park, Eun-Hee Kim, Hyun-Hee Choi, Geun-Ho Cho, Yeon-Gil Jung & Jing Zhang. (2017) New conversion process for fabricating a ceramic core by a 3D printing technique. Surface and Coatings Technology 332, pages 527-532.
Crossref
Crossref
K. Gnanasekaran, T. Heijmans, S. van Bennekom, H. Woldhuis, S. Wijnia, G. de With & H. Friedrich. (2017) 3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling. Applied Materials Today 9, pages 21-28.
Crossref
Crossref
Mohammad Taufik & Prashant K Jain. (2017) Characterization, modeling and simulation of fused deposition modeling fabricated part surfaces. Surface Topography: Metrology and Properties 5:4, pages 045003.
Crossref
Crossref
B. Coppola, N. Cappetti, L. Di Maio, P. Scarfato & L. Incarnato. (2017) Layered silicate reinforced polylactic acid filaments for 3D printing of polymer nanocomposites. Layered silicate reinforced polylactic acid filaments for 3D printing of polymer nanocomposites.
Wen See Tan, Stanislaus Raditya Suwarno, Jia An, Chee Kai Chua, Anthony G. Fane & Tzyy Haur Chong. (2017) Comparison of solid, liquid and powder forms of 3D printing techniques in membrane spacer fabrication. Journal of Membrane Science 537, pages 283-296.
Crossref
Crossref
Saroj Kumar Padhi, Ranjeet Kumar Sahu, S. S. Mahapatra, Harish Chandra Das, Anoop Kumar Sood, Brundaban Patro & A. K. Mondal. (2017) Optimization of fused deposition modeling process parameters using a fuzzy inference system coupled with Taguchi philosophy. Advances in Manufacturing 5:3, pages 231-242.
Crossref
Crossref
Mohammed Viquar Mohiuddin, Syed Ferhathullah Hussainy, Arkanti Krishnaiah & P. Laxminarayana. (2016) Experimental investigation to produce thin-walled sand casting using combination of casting simulation and additive manufacturing techniques. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 3147-3157.
Crossref
Crossref
Swee Leong Sing, Wai Yee Yeong, Florencia Edith Wiria, Bee Yen Tay, Ziqiang Zhao, Lin Zhao, Zhiling Tian & Shoufeng Yang. (2017) Direct selective laser sintering and melting of ceramics: a review. Rapid Prototyping Journal 23:3, pages 611-623.
Crossref
Crossref
Shangqin Yuan, Jiaming Bai, Chee Chua, Jun Wei & Kun Zhou. (2016) Material Evaluation and Process Optimization of CNT-Coated Polymer Powders for Selective Laser Sintering. Polymers 8:10, pages 370.
Crossref
Crossref
Fei Shen, Shangqin Yuan, Yanchunni Guo, Bo Zhao, Jiaming Bai, Mahan Qwamizadeh, Chee Kai Chua, Jun Wei & Kun Zhou. (2017) Energy Absorption of Thermoplastic Polyurethane Lattice Structures via 3D Printing: Modeling and Prediction. International Journal of Applied Mechanics 08:07, pages 1640006.
Crossref
Crossref