Advanced search
Publication Cover
Virtual and Physical Prototyping Volume 11, 2016 - Issue 3
Submit an article Journal homepage
781
Views
59
CrossRef citations to date
0
Altmetric
Original Articles

System development, formability quality and microstructure evolution of selective laser-melted magnesium

Youwen YangState Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha, People’s Republic of ChinaView further author information
,
Ping WuCollege of Chemistry, Xiangtan University, Xiangtan, People’s Republic of ChinaView further author information
,
Xin LinState Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, People’s Republic of ChinaView further author information
,
Yong LiuState Key Laboratory for Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaView further author information
,
Hong BianHunan Farsoon High-Technology Co. Ltd, Changsha, People’s Republic of ChinaView further author information
,
Yuanzhuo ZhouState Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha, People’s Republic of ChinaView further author information
,
Chengde GaoState Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha, People’s Republic of ChinaView further author information
&
Cijun ShuaiState Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha, People’s Republic of ChinaCorrespondence[email protected]
View further author information
 show all
Pages 173-181 | Received 21 Jun 2016, Accepted 05 Jul 2016, Published online: 02 Aug 2016

Citations (59)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Cijun Shuai, Chongxian He, Liang Xu, Quan Li, Tong Chen, Youwen Yang & Shuping Peng. (2018) Wrapping effect of secondary phases on the grains: increased corrosion resistance of Mg–Al alloys. Virtual and Physical Prototyping 13:4, pages 292-300.
Read now
Cijun Shuai, Lianfeng Xue, Chengde Gao, Youwen Yang, Shuping Peng & Yanru Zhang. (2018) Selective laser melting of Zn–Ag alloys for bone repair: microstructure, mechanical properties and degradation behaviour. Virtual and Physical Prototyping 13:3, pages 146-154.
Read now
Cijun Shuai, Chongxian He, Pei Feng, Wang Guo, Chengde Gao, Ping Wu, Youwen Yang & Shizhen Bin. (2018) Biodegradation mechanisms of selective laser-melted Mg–xAl–Zn alloy: grain size and intermetallic phase. Virtual and Physical Prototyping 13:2, pages 59-69.
Read now

Articles from other publishers (56)

Bo Peng, Haojing Xu, Fei Song, Peng Wen, Yun Tian & Yufeng Zheng. (2024) Additive manufacturing of porous magnesium alloys for biodegradable orthopedic implants: Process, design, and modification. Journal of Materials Science & Technology 182, pages 79-110.
Crossref
Shambhu Kumar Manjhi, Prithivirajan Sekar, Srikanth Bontha & A.S.S. Balan. (2024) Additive manufacturing of magnesium alloys: Characterization and post-processing. International Journal of Lightweight Materials and Manufacture 7:1, pages 184-213.
Crossref
Shang Sui, Shuai Guo, Dong Ma, Can Guo, Xiangquan Wu, Zhongming Zhang, Chunjie Xu, Dan Shechtman, Sergei Remennik, Daniel Safranchik & Rimma Lapovok. (2023) Additive manufacturing of magnesium and its alloys: process-formability-microstructure-performance relationship and underlying mechanism. International Journal of Extreme Manufacturing 5:4, pages 042009.
Crossref
Kun Li, Chen Ji, Shengwen Bai, Bin Jiang & Fusheng Pan. (2023) Selective laser melting of magnesium alloys: Necessity, formability, performance, optimization and applications. Journal of Materials Science & Technology 154, pages 65-93.
Crossref
Radu Emil Hendea, Doina Raducanu, Adrián Claver, José Antonio García, Vasile Danut Cojocaru, Anna Nocivin, Doina Stanciu, Nicolae Serban, Steliana Ivanescu, Corneliu Trisca-Rusu & Radu Septimiu Campian. (2023) Biodegradable Magnesium Alloys for Personalised Temporary Implants. Journal of Functional Biomaterials 14:8, pages 400.
Crossref
Farzad Badkoobeh, Hossein Mostaan, Mahdi Rafiei, Hamid Reza Bakhsheshi-Rad, Seeram RamaKrishna & Xiongbiao Chen. (2023) Additive manufacturing of biodegradable magnesium-based materials: Design strategies, properties, and biomedical applications. Journal of Magnesium and Alloys 11:3, pages 801-839.
Crossref
Bandar AlMangour, Jinquan Cheng, Dariusz Grzesiak, Yu-Jin Hwang & Kee-Ahn Lee. (2022) Fundamental Study on the Development of Pure Magnesium Parts by Additive Manufacturing: An Experimental and Computational Analysis. Metals and Materials International 29:2, pages 429-443.
Crossref
Iulian Antoniac, Veronica Manescu (Paltanea)Aurora Antoniac & Gheorghe Paltanea. (2023) Magnesium-based alloys with adapted interfaces for bone implants and tissue engineering. Regenerative Biomaterials 10.
Crossref
Alireza Nouri, Anahita Rohani Shirvan, Yuncang Li & Cuie Wen. (2023) Biodegradable metallic suture anchors: A review. Smart Materials in Manufacturing 1, pages 100005.
Crossref
Sudip Dasgupta & Yogendra Pratap Singh. 2023. Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing. Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing 103 127 .
Yun Zhou, Kai Zhang, Yaru Liang, Jun Cheng & Yilong Dai. (2022) Selective Laser Melted Magnesium Alloys: Fabrication, Microstructure and Property. Materials 15:20, pages 7049.
Crossref
NILESH TIPAN, AJAY PANDEY & PUSHYAMITRA MISHRA. (2022) MAGNESIUM BASED ALLOYS FOR BIODEGRADABLE IMPLANTS APPLICATIONS USING ADDITIVE MANUFACTURING TECHNIQUE: A REVIEW. Journal of Mechanics in Medicine and Biology 22:06.
Crossref
M. Ahmadi, S.A.A. Bozorgnia Tabary, D. Rahmatabadi, M.S. Ebrahimi, K. Abrinia & R. Hashemi. (2022) Review of selective laser melting of magnesium alloys: advantages, microstructure and mechanical characterizations, defects, challenges, and applications. Journal of Materials Research and Technology 19, pages 1537-1562.
Crossref
Xinzhi Li, Xuewei Fang, Shuaipeng Wang, Siqing Wang, Min Zha & Ke Huang. (2022) Selective laser melted AZ91D magnesium alloy with superior balance of strength and ductility. Journal of Magnesium and Alloys.
Crossref
Kaushik V, Nithish Kumar B, Sakthi Kumar S & Vignesh M. (2022) Magnesium role in additive manufacturing of biomedical implants – Challenges and opportunities. Additive Manufacturing 55, pages 102802.
Crossref
C.L. Wu, W.J. Xie & H.C. Man. (2022) Laser additive manufacturing of biodegradable Mg-based alloys for biomedical applications: A review. Journal of Magnesium and Alloys 10:4, pages 915-937.
Crossref
Meysam Nasr Azadani, Abolfazl Zahedi, Oluwole Kingsley Bowoto & Bankole Ibrahim Oladapo. (2022) A review of current challenges and prospects of magnesium and its alloy for bone implant applications. Progress in Biomaterials 11:1, pages 1-26.
Crossref
Marjan Bahraminasab, Mahsa Janmohammadi, Samaneh Arab, Athar Talebi, Vajihe Taghdiri Nooshabadi, Parisa Koohsarian & Mohammad Sadegh Nourbakhsh. (2021) Bone Scaffolds: An Incorporation of Biomaterials, Cells, and Biofactors. ACS Biomaterials Science & Engineering 7:12, pages 5397-5431.
Crossref
Liang-Yu Chen, Shun-Xing Liang, Yujing Liu & Lai-Chang Zhang. (2021) Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges. Materials Science and Engineering: R: Reports 146, pages 100648.
Crossref
Renáta Oriňaková, Radka Gorejová, Zuzana Orságová Králová, Martina Petráková & Andrej Oriňak. (2021) Novel trends and recent progress on preparation methods of biodegradable metallic foams for biomedicine: a review. Journal of Materials Science 56:25, pages 13925-13963.
Crossref
Raja Allavikutty, Pallavi Gupta, Tuhin Subhra Santra & Jayaganthan Rengaswamy. (2021) Additive manufacturing of Mg alloys for biomedical applications: Current status and challenges. Current Opinion in Biomedical Engineering 18, pages 100276.
Crossref
Hang Zhou, Bing Liang, Haitao Jiang, Zhongliang Deng & Kexiao Yu. (2021) Magnesium-based biomaterials as emerging agents for bone repair and regeneration: from mechanism to application. Journal of Magnesium and Alloys 9:3, pages 779-804.
Crossref
Yingxue Guo, Ming-Chun Zhao, Bin Xie, Ying-Chao Zhao, Dengfeng Yin, Chengde Gao, Cijun Shuai & Andrej Atrens. (2021) In Vitro Corrosion Resistance and Antibacterial Performance of Novel Fe– x Cu Biomedical Alloys Prepared by Selective Laser Melting . Advanced Engineering Materials 23:4.
Crossref
C.L. Wu, Wei Zai & H.C. Man. (2021) Additive manufacturing of ZK60 magnesium alloy by selective laser melting: Parameter optimization, microstructure and biodegradability. Materials Today Communications 26, pages 101922.
Crossref
Nurettin Sezer, Zafer Evis & Muammer Koç. (2021) Additive manufacturing of biodegradable magnesium implants and scaffolds: Review of the recent advances and research trends. Journal of Magnesium and Alloys 9:2, pages 392-415.
Crossref
Vicky Subhash Telang, Rakesh Pemmada, Vinoy Thomas, Seeram Ramakrishna, Puneet Tandon & Himansu Sekhar Nanda. (2021) Harnessing additive manufacturing for magnesium-based metallic bioimplants: Recent advances and future perspectives. Current Opinion in Biomedical Engineering 17, pages 100264.
Crossref
Satish Kumar, Ramaraju Bendi & Vipin Kumar. 2021. 3D printable Gel-inks for Tissue Engineering. 3D printable Gel-inks for Tissue Engineering 1 26 .
Jun-Xi Tao, Ming-Chun Zhao, Ying-Chao Zhao, Deng-Feng Yin, Long Liu, Chengde Gao, Cijun Shuai & Andrej Atrens. (2020) Influence of graphene oxide (GO) on microstructure and biodegradation of ZK30-xGO composites prepared by selective laser melting. Journal of Magnesium and Alloys 8:3, pages 952-962.
Crossref
J. Dong, Y. Li, P. Lin, M.A. Leeflang, S. van Asperen, K. Yu, N. Tümer, B. Norder, A.A. Zadpoor & J. Zhou. (2020) Solvent-cast 3D printing of magnesium scaffolds. Acta Biomaterialia 114, pages 497-514.
Crossref
Shuai Liu & Hanjie Guo. (2020) Balling Behavior of Selective Laser Melting (SLM) Magnesium Alloy. Materials 13:16, pages 3632.
Crossref
Shuai Liu & Hanjie Guo. (2020) A Review of SLMed Magnesium Alloys: Processing, Properties, Alloying Elements and Postprocessing. Metals 10:8, pages 1073.
Crossref
D. Carluccio, A. G. Demir, M. J. Bermingham & M. S. Dargusch. (2020) Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications. Metallurgical and Materials Transactions A 51:7, pages 3311-3334.
Crossref
Zhina Hadisi, Tavia Walsh, Seyed Mohammad Hossein Dabiri, Amir Seyfoori, Brent Godeau, Gabriel Charest, David Fortin & Mohsen Akbari. (2020) 3D printing for the future of medicine. Journal of 3D Printing in Medicine 4:1, pages 45-67.
Crossref
Xu Yang, Jianrui Liu, Zhennan Wang, Xin Lin, Fencheng Liu, Weidong Huang & Enquan Liang. (2020) Microstructure and mechanical properties of wire and arc additive manufactured AZ31 magnesium alloy using cold metal transfer process. Materials Science and Engineering: A 774, pages 138942.
Crossref
Youwen Yang, Chongxian He, Dianyu E, Wenjing Yang, Fangwei Qi, Deqiao Xie, Lida Shen, Shuping Peng & Cijun Shuai. (2020) Mg bone implant: Features, developments and perspectives. Materials & Design 185, pages 108259.
Crossref
Cijun Shuai, Guofeng Liu, Youwen Yang, Wenjing Yang, Chongxian He, Guoyong Wang, Zheng Liu, Fangwei Qi & Shuping Peng. (2020) Functionalized BaTiO3 enhances piezoelectric effect towards cell response of bone scaffold. Colloids and Surfaces B: Biointerfaces 185, pages 110587.
Crossref
Mojtaba Salehi, Saeed Maleksaeedi, Mui Ling Sharon Nai & Manoj Gupta. (2019) Towards additive manufacturing of magnesium alloys through integration of binderless 3D printing and rapid microwave sintering. Additive Manufacturing 29, pages 100790.
Crossref
Yu Qin, Peng Wen, Hui Guo, Dandan Xia, Yufeng Zheng, Lucas Jauer, Reinhart Poprawe, Maximilian Voshage & Johannes Henrich Schleifenbaum. (2019) Additive manufacturing of biodegradable metals: Current research status and future perspectives. Acta Biomaterialia 98, pages 3-22.
Crossref
Mojtaba Salehi, Saeed Maleksaeedi, Muhammad Adib Bin Sapari, Mui Ling Sharon Nai, Ganesh Kumar Meenashisundaram & Manoj Gupta. (2019) Additive manufacturing of magnesium–zinc–zirconium (ZK) alloys via capillary-mediated binderless three-dimensional printing. Materials & Design 169, pages 107683.
Crossref
Cijun Shuai, Long Liu, Youwen Yang, Chengde Gao, Mingchun Zhao, Lu Yi & Shuping Peng. (2018) Lanthanum-Containing Magnesium Alloy with Antitumor Function Based on Increased Reactive Oxygen Species. Applied Sciences 8:11, pages 2109.
Crossref
Cijun Shuai, Yuanzhuo Zhou, Youwen Yang, Chengde Gao, Shuping Peng & Guoyong Wang. (2018) Ag-Introduced Antibacterial Ability and Corrosion Resistance for Bio-Mg Alloys. BioMed Research International 2018, pages 1-13.
Crossref
Mojtaba Salehi, Saeed Maleksaeedi, Hamidreza Farnoush, Mui Ling Sharon Nai, Ganesh Kumar Meenashisundaram & Manoj Gupta. (2018) An investigation into interaction between magnesium powder and Ar gas: Implications for selective laser melting of magnesium. Powder Technology 333, pages 252-261.
Crossref
Leonhard Hitzler, Markus Merkel, Wayne Hall & Andreas Öchsner. (2018) A Review of Metal Fabricated with Laser‐ and Powder‐Bed Based Additive Manufacturing Techniques: Process, Nomenclature, Materials, Achievable Properties, and its Utilization in the Medical Sector. Advanced Engineering Materials 20:5.
Crossref
Youwen Yang, Xiaoning Guo, Chongxian He, Chengde Gao & Cijun Shuai. (2018) Regulating Degradation Behavior by Incorporating Mesoporous Silica for Mg Bone Implants. ACS Biomaterials Science & Engineering 4:3, pages 1046-1054.
Crossref
Guanjun Wang, Lida Shen, Jianfeng Zhao, Huixin Liang, Deqiao Xie, Zongjun Tian & Changjiang Wang. (2018) Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing. ACS Biomaterials Science & Engineering 4:2, pages 719-727.
Crossref
Yu-chao Bai, Fan Fu, Ze-feng Xiao, Ming-kang Zhang, Di Wang, Yong-qiang Yang & Chang-hui Song. (2018) Progress in selective laser melting equipment, related biomedical metallic materials and applications激光选区熔化设备及生物医学金属材料的研究与应用进展. Journal of Zhejiang University-SCIENCE A 19:2, pages 122-136.
Crossref
Y. Li, J. Zhou, P. Pavanram, M.A. Leeflang, L.I. Fockaert, B. Pouran, N. Tümer, K.-U. Schröder, J.M.C. Mol, H. Weinans, H. Jahr & A.A. Zadpoor. (2018) Additively manufactured biodegradable porous magnesium. Acta Biomaterialia 67, pages 378-392.
Crossref
Chengde Gao, Shuping Peng, Pei Feng & Cijun Shuai. (2017) Bone biomaterials and interactions with stem cells. Bone Research 5:1.
Crossref
Cijun Shuai, Youwen Yang, Shuping Peng, Chengde Gao, Pei Feng, Jian Chen, Yong Liu, Xin Lin, Sheng Yang & Fulai Yuan. (2017) Nd-induced honeycomb structure of intermetallic phase enhances the corrosion resistance of Mg alloys for bone implants. Journal of Materials Science: Materials in Medicine 28:9.
Crossref
Long Liu, Fulai Yuan, Mingchun Zhao, Chengde Gao, Pei Feng, Youwen Yang, Sheng Yang & Cijun Shuai. (2017) Rare Earth Element Yttrium Modified Mg-Al-Zn Alloy: Microstructure, Degradation Properties and Hardness. Materials 10:5, pages 477.
Crossref
Cijun Shuai, Chenying Shuai, Pei Feng, Youwen Yang, Yong Xu, Tian Qin, Sheng Yang, Chengde Gao & Shuping Peng. (2017) Silane Modified Diopside for Improved Interfacial Adhesion and Bioactivity of Composite Scaffolds. Molecules 22:4, pages 511.
Crossref
Chongxian He, Shizhen Bin, Ping Wu, Chengde Gao, Pei Feng, Youwen Yang, Long Liu, Yuanzhuo Zhou, Mingchun Zhao, Sheng Yang & Cijun Shuai. (2017) Microstructure Evolution and Biodegradation Behavior of Laser Rapid Solidified Mg–Al–Zn Alloy. Metals 7:3, pages 105.
Crossref
Cijun Shuai, Yuanzhuo Zhou, Youwen Yang, Pei Feng, Long Liu, Chongxian He, Mingchun Zhao, Sheng Yang, Chengde Gao & Ping Wu. (2017) Biodegradation Resistance and Bioactivity of Hydroxyapatite Enhanced Mg-Zn Composites via Selective Laser Melting. Materials 10:3, pages 307.
Crossref
Chee Kai Chua, Chee How Wong & Wai Yee Yeong. 2017. Standards, Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing. Standards, Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing 1 29 .
Jianhua Zhou, Fulai Yuan, Shuping Peng, Hui Xie, Ping Wu, Pei Feng, Chengde Gao, Youwen Yang, Wang Guo, Duan Lai, Zhiyang Zhou, Xueling Zhu & Cijun Shuai. (2016) Tunable Degradation Rate and Favorable Bioactivity of Porous Calcium Sulfate Scaffolds by Introducing Nano-Hydroxyapatite. Applied Sciences 6:12, pages 411.
Crossref
Jian Chen, Ping Wu, Qiyuan Wang, Youwen Yang, Shuping Peng, Yuanzhuo Zhou, Cijun Shuai & Youwen Deng. (2016) Influence of Alloying Treatment and Rapid Solidification on the Degradation Behavior and Mechanical Properties of Mg. Metals 6:11, pages 259.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.