Advanced search
Publication Cover
Virtual and Physical Prototyping Volume 13, 2018 - Issue 4
Submit an article Journal homepage
2,038
Views
40
CrossRef citations to date
0
Altmetric
Original Articles

3D Metal printed heat sinks with longitudinally varying lattice structure sizes using direct metal laser sintering

Deepak ShamvediDepartment of Engineering Technology, Waterford Institute of Technology, Waterford, IrelandCorrespondence[email protected]
ORCID Iconhttp://orcid.org/0000-0001-7662-263X
ORCID Icon,
Oliver J. McCarthyDepartment of Engineering Technology, Waterford Institute of Technology, Waterford, Ireland;SEAM Research Centre, Waterford Institute of Technology, Waterford, Ireland
,
Eoghan O’DonoghueDepartment of Engineering Technology, Waterford Institute of Technology, Waterford, Ireland;SEAM Research Centre, Waterford Institute of Technology, Waterford, Ireland
,
Cyril DanilenkoffDepartment of Engineering Technology, Waterford Institute of Technology, Waterford, Ireland;SEAM Research Centre, Waterford Institute of Technology, Waterford, Ireland
,
Paul O’LearyDepartment of Engineering Technology, Waterford Institute of Technology, Waterford, Ireland
&
Ramesh RaghavendraDepartment of Engineering Technology, Waterford Institute of Technology, Waterford, Ireland;SEAM Research Centre, Waterford Institute of Technology, Waterford, Ireland
Pages 301-310 | Received 24 Mar 2018, Accepted 18 May 2018, Published online: 27 May 2018

Citations (40)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

Liping Ding, Shujie Tan, Wenliang Chen, Yaming Jin, Yuchun Sun & Yicha Zhang. (2022) Development of a manufacturability predictor for periodic cellular structures in a selective laser melting process via experiment and ANN modelling. Virtual and Physical Prototyping 17:4, pages 948-965.
Read now
Jiaqi Huang, Qian Chen, Hao Jiang, Bin Zou, Lei Li, Jikai Liu & Huangchao Yu. (2020) A survey of design methods for material extrusion polymer 3D printing. Virtual and Physical Prototyping 15:2, pages 148-162.
Read now
Huangchao Yu, Jiaqi Huang, Bin Zou, Wen Shao & Jikai Liu. (2020) Stress-constrained shell-lattice infill structural optimisation for additive manufacturing. Virtual and Physical Prototyping 15:1, pages 35-48.
Read now
Jikai Liu, Yufan Zheng, Rafiq Ahmad, Jinyuan Tang & Yongsheng Ma. (2019) Minimum length scale constraints in multi-scale topology optimisation for additive manufacturing. Virtual and Physical Prototyping 14:3, pages 229-241.
Read now

Articles from other publishers (36)

Pierre Lhommeau, Mathieu Lamy & Jean-Sébastien Plante. (2023) Design and characterization of a miniaturized low inertia and low viscous friction magnetorheological clutch using 3D metal printing for human-robot applications. Journal of Intelligent Material Systems and Structures 34:14, pages 1633-1645.
Crossref
Daeyoung Kong, Euibeen Jung, Yunseo Kim, Vivek Vardhan Manepalli, Kyupaeck Jeff Rah, Han Sang Kim, Yongtaek Hong, Hyoung Gil Choi, Damena Agonafer & Hyoungsoon Lee. (2023) An additively manufactured manifold-microchannel heat sink for high-heat flux cooling. International Journal of Mechanical Sciences 248, pages 108228.
Crossref
Bo Song, Pengfei Wang & Yusheng Shi. 2023. Metamaterial Design and Additive Manufacturing. Metamaterial Design and Additive Manufacturing 15 60 .
Jian Liu, Mengyao Xu, Rongdi Zhang, Xirui Zhang & Wenxiong Xi. (2022) Progress of Porous/Lattice Structures Applied in Thermal Management Technology of Aerospace Applications. Aerospace 9:12, pages 827.
Crossref
S. Kamal Krishnam Raju & Prasad S. Onkar. (2022) Lattice_Karak: Lattice structure generator for tissue engineering, lightweighting and heat exchanger applications. Software Impacts 14, pages 100425.
Crossref
Jiong Zhang, Ruochen Hong & Hao Wang. (2022) 3D-printed functionally-graded lattice structure with tunable removal characteristics for precision polishing. Additive Manufacturing 59, pages 103152.
Crossref
Ahmet Guray Caket, Chunyang Wang, Marvel Alif Nugroho, Hasan Celik & Moghtada Mobedi. (2022) Recent studies on 3D lattice metal frame technique for enhancement of heat transfer: Discovering trends and reasons. Renewable and Sustainable Energy Reviews 167, pages 112697.
Crossref
Mohamad Modrek, Asha Viswanath, Kamran A. Khan, Mohamed I.Hassan Ali & Rashid K. Abu Al-Rub. (2022) An optimization case study to design additively manufacturable porous heat sinks based on triply periodic minimal surface (TPMS) lattices. Case Studies in Thermal Engineering 36, pages 102161.
Crossref
Jia Li, Cyrille Boyer & Xuewen Zhang. (2022) 3D Printing based on Photopolymerization and Photocatalysts: Review and Prospect. Macromolecular Materials and Engineering 307:8, pages 2200010.
Crossref
Nada Baobaid, Mohamed I. Ali, Kamran A. Khan & Rashid K. Abu Al-Rub. (2022) Fluid flow and heat transfer of porous TPMS architected heat sinks in free convection environment. Case Studies in Thermal Engineering 33, pages 101944.
Crossref
Zhi Zhang, Lei Zhang, Bo Song, Yonggang Yao & Yusheng Shi. (2022) Bamboo-inspired, simulation-guided design and 3D printing of light-weight and high-strength mechanical metamaterials. Applied Materials Today 26, pages 101268.
Crossref
Pawel Szymanski & Dariusz Mikielewicz. (2022) Additive Manufacturing as a Solution to Challenges Associated with Heat Pipe Production. Materials 15:4, pages 1609.
Crossref
Gabriele Sciacca, Mirko Sinico, Giacomo Cogo, Davide Bigolaro, Adriano Pepato & Juan Esposito. (2022) Experimental and numerical characterization of pure copper heat sinks produced by laser powder bed fusion. Materials & Design 214, pages 110415.
Crossref
Allan Soo, Syed Muztuza Ali & Ho Kyong Shon. (2021) 3D printing for membrane desalination: Challenges and future prospects. Desalination 520, pages 115366.
Crossref
A.J. Robinson, J. Colenbrander, T. Deaville, J. Durfee & R. Kempers. (2021) A wicked heat pipe fabricated using metal additive manufacturing. International Journal of Thermofluids 12, pages 100117.
Crossref
Inderjot Kaur & Prashant Singh. (2021) State-of-the-art in heat exchanger additive manufacturing. International Journal of Heat and Mass Transfer 178, pages 121600.
Crossref
Mark Baldry, Victoria Timchenko & Chris Menictas. (2021) The Effect of Orientation on the Performance of Small Free-Convection Heat Sinks for Use With a Thermoelectric Cryotherapy Device. Journal of Thermal Science and Engineering Applications 13:4.
Crossref
Muhammad Jahidul Hoque, Alperen Günay, Andrew Stillwell, Yashraj Gurumukhi, Robert C. N. Pilawa-Podgurski & Nenad Miljkovic. (2021) Modular Heat Sinks for Enhanced Thermal Management of Electronics. Journal of Electronic Packaging 143:2.
Crossref
Ken M. Nsiempba, Marc Wang & Mihaela Vlasea. (2021) Geometrical Degrees of Freedom for Cellular Structures Generation: A New Classification Paradigm. Applied Sciences 11:9, pages 3845.
Crossref
Oraib Al-Ketan, Mohamed Ali, Mohamad Khalil, Reza Rowshan, Kamran A. Khan & Rashid K. Abu Al-Rub. (2021) Forced Convection Computational Fluid Dynamics Analysis of Architected and Three-Dimensional Printable Heat Sinks Based on Triply Periodic Minimal Surfaces. Journal of Thermal Science and Engineering Applications 13:2.
Crossref
Chunze Yan, Liang Hao, Lei Yang, Ahmed Yussuf Hussein, Philippe G. Young, Zhaoqing Li & Yan Li. 2021. Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting. Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting 219 281 .
Jikai Liu & Huangchao Yu. (2020) Self-Support Topology Optimization With Horizontal Overhangs for Additive Manufacturing. Journal of Manufacturing Science and Engineering 142:9.
Crossref
Lei Yang, Changjun Han, Hongzhi Wu, Liang Hao, Qingsong Wei, Chunze Yan & Yusheng Shi. (2020) Insights into unit cell size effect on mechanical responses and energy absorption capability of titanium graded porous structures manufactured by laser powder bed fusion. Journal of the Mechanical Behavior of Biomedical Materials 109, pages 103843.
Crossref
Joshua Tompkins & David Huitink. (2020) Air Flow Inversion for Enhanced Electronics Cooling in Additively Manufactured Air Channels. Air Flow Inversion for Enhanced Electronics Cooling in Additively Manufactured Air Channels.
Y. Ibrahim, C. M. Davies, C. Maharaj, Z. Li, J. P. Dear & P. A. Hooper. (2020) Post-yield performance of additive manufactured cellular lattice structures. Progress in Additive Manufacturing 5:2, pages 211-220.
Crossref
P.A. Lykov, Ludmila V. Radionova & A.O. Shults. (2020) Influence of Powder Layer Thickness on Microstructure of Selective Laser Melted TiAl6V4. Solid State Phenomena 299, pages 524-529.
Crossref
Cijun Shuai, Guofeng Liu, Youwen Yang, Wenjing Yang, Chongxian He, Guoyong Wang, Zheng Liu, Fangwei Qi & Shuping Peng. (2020) Functionalized BaTiO3 enhances piezoelectric effect towards cell response of bone scaffold. Colloids and Surfaces B: Biointerfaces 185, pages 110587.
Crossref
Dg. H. Kassim, A. Putra, M. F. S. Che Hamid & Mohd Rizal Alkahari. 2020. Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials. Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials 69 79 .
Dekui Kong, Yongcun Zhang & Shutian Liu. (2019) Convective heat transfer enhancement by novel honeycomb-core in sandwich panel exchanger fabricated by additive manufacturing. Applied Thermal Engineering 163, pages 114408.
Crossref
Mark Baldry, Victoria Timchenko & Chris Menictas. (2019) Optimal design of a natural convection heat sink for small thermoelectric cooling modules. Applied Thermal Engineering 160, pages 114062.
Crossref
Chao WeiZhe SunQian ChenZhu LiuLin Li. (2019) Additive Manufacturing of Horizontal and 3D Functionally Graded 316L/Cu10Sn Components via Multiple Material Selective Laser Melting. Journal of Manufacturing Science and Engineering 141:8.
Crossref
Wanli Ma, Fenghe Tao, Changzhi Jia & Xiangdong Men. (2019) Analysis on microstructure and wear resistance of TiC particles reinforced 1Cr12Ni3Mo2V matrix composites processed by laser stereo forming. AIP Advances 9:7.
Crossref
Naveed Ahmed. (2019) Direct metal fabrication in rapid prototyping: A review. Journal of Manufacturing Processes 42, pages 167-191.
Crossref
Junyu Fu, Jiaqi Huang & Jikai Liu. (2019) Topology Optimization With Selective Problem Setups. IEEE Access 7, pages 180846-180855.
Crossref
Y. Ibrahim, Z. Li, C.M. Davies, C. Maharaj, J.P. Dear & P.A. Hooper. (2018) Acoustic resonance testing of additive manufactured lattice structures. Additive Manufacturing 24, pages 566-576.
Crossref
Joaquim Minguella-Canela, Sergio Morales Planas, Joan Gomà Ayats & M. de los Santos López. (2018) Assessment of the Potential Economic Impact of the Use of AM Technologies in the Cost Levels of Manufacturing and Stocking of Spare Part Products. Materials 11:8, pages 1429.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.