CALPHAD aided design of a crack-free Al-Mg-Si-Ti alloy with high strength: heterogeneous nucleation and eutectic filling during additive manufacturing

Tao Wena State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaView further author information

Zhicheng Lia State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaView further author information

Jianying Wanga State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaCorrespondence[email protected]
View further author information

Feipeng Yanga State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaView further author information

Mengzhen Zhua State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaView further author information

Yimou Luoa State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaView further author information

Lijun Zhanga State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaView further author information

Zhilin Liub Light Alloy Research Institute, College of Mechanical and Electrical Engineering, Central South University, Changsha, People’s Republic of ChinaView further author information

Dong Qiuc Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, AustraliaView further author information

Hailin Yanga State Key Laboratory of Powder Metallurgy, Central South University, Changsha, People’s Republic of ChinaCorrespondence[email protected]
View further author information

Shouxun Jid Brunel Centre for Advanced Solidification Technology (BCAST), Brunel University London, Uxbridge, Middlesex, UKView further author information

show all

CALPHAD aided design of a crack-free Al-Mg-Si-Ti alloy with high strength: heterogeneous nucleation and eutectic filling during additive manufacturing

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature

CALPHAD aided design of a crack-free Al-Mg-Si-Ti alloy with high strength: heterogeneous nucleation and eutectic filling during additive manufacturing

Citations (0)

Related research

To cite this article:

Download citation

Information for

Open access

Opportunities

Help and information

Keep up to date