761
Views
15
CrossRef citations to date
0
Altmetric
Case Report

Testing of a 3D printed hand exoskeleton for an individual with stroke: a case study

, , ORCID Icon, , &
Pages 209-213 | Received 11 Jan 2019, Accepted 18 Jul 2019, Published online: 06 Aug 2019

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (1)

M. M. S. Chan, C. K. Y. Lo & C. W. Kan. (2023) Application of additive manufacturing/3D printing on rehabilitation and healthcare: a systematic and citation network analysis review. The Journal of The Textile Institute 0:0, pages 1-10.
Read now

Articles from other publishers (14)

Andrea Demeco, Ruben Foresti, Antonio Frizziero, Nicola Daracchi, Francesco Renzi, Margherita Rovellini, Antonello Salerno, Chiara Martini, Laura Pelizzari & Cosimo Costantino. (2023) The Upper Limb Orthosis in the Rehabilitation of Stroke Patients: The Role of 3D Printing. Bioengineering 10:11, pages 1256.
Crossref
Dariusz Mikołajewski, Izabela Rojek, Piotr Kotlarz, Janusz Dorożyński & Jakub Kopowski. (2023) Personalization of the 3D-Printed Upper Limb Exoskeleton Design—Mechanical and IT Aspects. Applied Sciences 13:12, pages 7236.
Crossref
Juan C. Maldonado-Mejía, Marcela Múnera, Camilo A. R. Diaz, Helge Wurdemann, Mehran Moazen, Maria José Pontes, Marcelo Eduardo Vieira Segatto, Maxwell E. Monteiro & Carlos A. Cifuentes. (2023) A fabric-based soft hand exoskeleton for assistance: the ExHand Exoskeleton. Frontiers in Neurorobotics 17.
Crossref
Patricio Barria, Matías Riquelme, Hannah Reppich, Ana Cisnal, Juan-Carlos Fraile, Javier Pérez-Turiel, David Sierra, Rolando Aguilar, Asterio Andrade & Cristian Nuñez-Espinosa. (2023) Hand rehabilitation based on the RobHand exoskeleton in stroke patients: A case series study. Frontiers in Robotics and AI 10.
Crossref
Izabela Rojek, Mariusz Kaczmarek, Piotr Kotlarz, Marcin Kempiński, Dariusz Mikołajewski, Zbigniew Szczepański, Jakub Kopowski, Joanna Nowak, Marek Macko, Andrzej Szczepańczyk, Tomasz Schmidt & Paweł Leszczyński. (2023) Hand Exoskeleton—Development of Own Concept. Applied Sciences 13:5, pages 3238.
Crossref
Izabela Rojek, Jakub Kopowski, Piotr Kotlarz, Janusz Dorożyński, Ewa Dostatni & Dariusz Mikołajewski. (2022) Deep Learning in Design of Semi-Automated 3D Printed Chainmail with Pre-Programmed Directional Functions for Hand Exoskeleton. Applied Sciences 12:16, pages 8106.
Crossref
Jakub Kopowski, Dariusz Mikołajewski, Piotr Kotlarz, Ewa Dostatni & Izabela Rojek. (2022) A Semi-Automated 3D-Printed Chainmail Design Algorithm with Preprogrammed Directional Functions for Hand Exoskeleton. Applied Sciences 12:10, pages 5007.
Crossref
Bernardo Noronha, Chwee Yin Ng, Kieran Little, Michele Xiloyannis, Christopher Wee Keong Kuah, Seng Kwee Wee, Suhas Raghavendra Kulkarni, Lorenzo Masia, Karen Sui Geok Chua & Dino Accoto. (2022) Soft, Lightweight Wearable Robots to Support the Upper Limb in Activities of Daily Living: A Feasibility Study on Chronic Stroke Patients. IEEE Transactions on Neural Systems and Rehabilitation Engineering 30, pages 1401-1411.
Crossref
Laura Maria Alessandra La Bara, Luca Meloni, Davide Giusino & Luca Pietrantoni. (2021) Assessment Methods of Usability and Cognitive Workload of Rehabilitative Exoskeletons: A Systematic Review. Applied Sciences 11:15, pages 7146.
Crossref
Muhammad Saad bin Imtiaz, Channa Babar Ali, Zareena Kausar, Syed Yaseen Shah, Syed Aziz Shah, Jawad Ahmad, Muhammad Ali Imran & Qammer Hussain Abbasi. (2021) Design of Portable Exoskeleton Forearm for Rehabilitation of Monoparesis Patients Using Tendon Flexion Sensing Mechanism for Health Care Applications. Electronics 10:11, pages 1279.
Crossref
Betsy Chaparro-Rico, Katiuscia Martinello, Sergio Fucile & Daniele Cafolla. (2021) User-Tailored Orthosis Design for 3D Printing with PLACTIVE: A Quick Methodology. Crystals 11:5, pages 561.
Crossref
Mads Jochumsen, Taha Al Muhammadee Janjua, Juan Carlos Arceo, Jimmy Lauber, Emilie Simoneau Buessinger & Rasmus Leck Kæseler. (2021) Induction of Neural Plasticity Using a Low-Cost Open Source Brain-Computer Interface and a 3D-Printed Wrist Exoskeleton. Sensors 21:2, pages 572.
Crossref
Izabela Rojek, Dariusz Mikołajewski, Ewa Dostatni & Marek Macko. (2020) AI-Optimized Technological Aspects of the Material Used in 3D Printing Processes for Selected Medical Applications. Materials 13:23, pages 5437.
Crossref
N. D. Babanov & O. V. Kubryak. (2020) Physiological methods in the study of “passive” industrial exoskeletons of the back and lower extremities. Russian Journal of Occupational Health and Industrial Ecology:5, pages 318-328.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.