Advanced search
Publication Cover
Geomechanics and Geoengineering
An International Journal
Volume 5, 2010 - Issue 2
Submit an article Journal homepage
396
Views
23
CrossRef citations to date
0
Altmetric
Original Articles

Using a seismic survey to measure the shear modulus of clean and fouled ballast

P. Anbazhagan Department of Civil Engineering, Indian Institute of Science, Bangalore, 560012, India; University of Wollongong, School of Civil, Mining and Environmental Engineering, Faculty of Engineering, University of Wolongong, Wollongong, AustraliaCorrespondence[email protected]
,
Buddhima Indraratna University of Wollongong, School of Civil, Mining and Environmental Engineering, Faculty of Engineering, University of Wolongong, Wollongong, Australia
,
Cholachat Rujikiatkamjorn University of Wollongong, School of Civil, Mining and Environmental Engineering, Faculty of Engineering, University of Wolongong, Wollongong, Australia
&
Lijun Su University of Wollongong, School of Civil, Mining and Environmental Engineering, Faculty of Engineering, University of Wolongong, Wollongong, Australia
Pages 117-126 | Received 03 Jun 2009, Accepted 05 Nov 2009, Published online: 10 Jun 2010

Citations (23)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

Mehdi Koohmishi. (2021) Establishment of analytical-numerical method to determine the water level in the railway ballast layer contaminated with sandy material. European Journal of Environmental and Civil Engineering 25:13, pages 2457-2473.
Read now

Articles from other publishers (22)

Mehdi Koohmishi & Yunlong Guo. (2023) Data-driven clay-fouled ballast permeability assessment using analytical-numerical and machine learning approaches. Transportation Geotechnics 43, pages 101151.
Crossref
Mingu Kang, Han Wang, Issam I. A. Qamhia, Erol Tutumluer, Younes Haddani & Adam Bankston. (2023) Degraded Ballast Stiffness Characterization Using Bender Element Field Sensor and PANDA ® Penetrometer . Transportation Research Record: Journal of the Transportation Research Board 2677:8, pages 428-438.
Crossref
Ganzhong Liu, Jianli Cong, Ping Wang, Shuai Du, Li Wang & Rong Chen. (2022) Study on vertical vibration and transmission characteristics of railway ballast using impact hammer test. Construction and Building Materials 316, pages 125898.
Crossref
Erdem BALCI, Ertan YALÇIN, Tunay Uzbay YELCE & Niyazi BEZGİN. (2021) BİR DEMİRYOLU HATTININ BİRİM ESNEME DİRENCİ ÜZERİNDE ETKİSİ OLAN MEKANİK VE GEOMETRİK NİTELİKLERİN İNCELENMESİINVESTIGATION OF THE MECHANICAL AND GEOMETRIC PROPERTIES AFFECTING THE RAILWAY TRACK STIFFNESS. Mühendislik Bilimleri ve Tasarım Dergisi 9:4, pages 1408-1423.
Crossref
Mehdi Koohmishi & Alireza Azarhoosh. (2020) Hydraulic conductivity of fresh railway ballast mixed with crumb rubber considering size and percentage of crumb rubber as well as aggregate gradation. Construction and Building Materials 241, pages 118133.
Crossref
Mehdi Koohmishi. (2019) Drainage potential of degraded railway ballast considering initial gradation and intrusion of external fine materials. Soils and Foundations 59:6, pages 2265-2278.
Crossref
Haohang Huang, Maziar Moaveni, Scott Schmidt, Erol Tutumluer & John M. Hart. (2018) Evaluation of Railway Ballast Permeability Using Machine Vision–Based Degradation Analysis. Transportation Research Record: Journal of the Transportation Research Board 2672:10, pages 62-73.
Crossref
Ali Reza TolouKian, Javad SadeghiJabbar-Ali Zakeri. (2018) Large-scale direct shear tests on sand-contaminated ballast. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering 171:5, pages 451-461.
Crossref
Mehdi Koohmishi & Massoud Palassi. (2018) Effect of gradation of aggregate and size of fouling materials on hydraulic conductivity of sand-fouled railway ballast. Construction and Building Materials 167, pages 514-523.
Crossref
Won-Taek Hong, Sang Yeob Kim, Sung Jin Lee & Jong-Sub Lee. (2017) Strength and stiffness assessment of railway track substructures using crosshole-type dynamic cone penetrometer. Soil Dynamics and Earthquake Engineering 100, pages 88-97.
Crossref
Xing-qian Xu, Li-jun Su & Chao Liu. (2016) The spatial distribution characteristics of shallow fissures of a landslide in the Wenchuan earthquake area. Journal of Mountain Science 13:9, pages 1544-1557.
Crossref
P. Anbazhagan, P.S. Naresh Dixit & T.P. Bharatha. (2016) Identification of type and degree of railway ballast fouling using ground coupled GPR antennas. Journal of Applied Geophysics 126, pages 183-190.
Crossref
Hea-Jin Hwang & Hyung-Choon Park. (2014) Evaluation of condition of gravel ballast layer on high-speed railway using surface wave method based on harmonic wavelet analysis of waves. NDT & E International 68, pages 78-87.
Crossref
P. Anbazhagan, T. P. Bharatha & G. Amarajeevi. (2012) Study of Ballast Fouling in Railway Track Formations. Indian Geotechnical Journal 42:2, pages 87-99.
Crossref
P. Anbazhagan, Aditya Parihar & H.N. Rashmi. (2012) Review of correlations between SPT N and shear modulus: A new correlation applicable to any region. Soil Dynamics and Earthquake Engineering 36, pages 52-69.
Crossref
P. Anbazhagan & M. Neaz Sheikh. (2012) Seismic Site Classifications and Site Amplifications for the Urban Centres in the Shallow Overburden Deposits. International Journal of Geotechnical Earthquake Engineering 3:1, pages 86-108.
Crossref
P. Anbazhagan, Parihar Aditya & H.N. Rashmi. (2011) Amplification based on shear wave velocity for seismic zonation: comparison of empirical relations and site response results for shallow engineering bedrock sites. Geomechanics and Engineering 3:3, pages 189-206.
Crossref
P. Anbazhagan, Su Lijun, Indraratna Buddhima & Rujikiatkamjorn Cholachat. (2011) Model track studies on fouled ballast using ground penetrating radar and multichannel analysis of surface wave. Journal of Applied Geophysics 74:4, pages 175-184.
Crossref
P. Anbazhagan & H. N. Rashmi. (2011) Characterization of Rail Track Subsurface Using Seismic Refraction Survey. Characterization of Rail Track Subsurface Using Seismic Refraction Survey.
Buddhima IndraratnaLi-jun SuCholachat Rujikiatkamjorn. (2011) A new parameter for classification and evaluation of railway ballast fouling. Canadian Geotechnical Journal 48:2, pages 322-326.
Crossref
M. R. Mitchell, R. E. Link, P. Anbazhagan, Indraratna Buddhima & G. Amarajeevi. (2011) Characterization of Clean and Fouled Rail Track Ballast Subsurface Using Seismic Surface Survey Method: Model and Field Studies. Journal of Testing and Evaluation 39:5, pages 103472.
Crossref
L. D. Suits, T. C. Sheahan, P. Anbazhagan & T. G. Sitharam. (2010) Relationship between Low Strain Shear Modulus and Standard Penetration Test N Values. Geotechnical Testing Journal 33:2, pages 102278.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.