http://orcid.org/0000-0003-2684-1994
Citations (42)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
Danian Wang, Yue Zhao, Xin Ge, Chengchao Zhang, Shuang Han, Zhenan Qiao, Lei Wang, Huiyuan Wang & Chaoquan Hu. (2022) Designing hard, low-refractive-index lossy materials for super wear-resistant absorbers. Materials Research Letters 10:7, pages 472-480.
Read now
Read now
Articles from other publishers (41)
Ahmed Fawzy, Hatun H. Alsharief, Arafat Toghan, Areej Al Bahir, Mona Alhasani, Nada Alqarni, Amani M.R. Alsaedi & Thoraya A. Fargaly. (2023) Evaluation of protection performances of novel synthesized bis-oxindole-based derivatives for the corrosion of aluminum in acidic environment. Journal of Molecular Structure 1294, pages 136443.
Crossref
Crossref
Saeid Karimi, Naeimeh Fakhar, Mehrdad Faraji & Faramarz Fereshteh-Saniee. (2023) Simultaneous improvement of mechanical strength and corrosion resistance in aluminum alloy 5083 via severe plastic deformation. Materials Chemistry and Physics, pages 128755.
Crossref
Crossref
Olga A. Yakovtseva, Nadezhda B. Emelina, Andrey G. Mochugovskiy, Andrey I. Bazlov, Alexey S. Prosviryakov & Anastasia V. Mikhaylovskaya. (2023) Effect of Mechanical Alloying on the Dissolution of the Elemental Mn and Al-Mn Compound in Aluminum. Metals 13:10, pages 1765.
Crossref
Crossref
Temitope Olumide Olugbade. (2023) Review: Corrosion Resistance Performance of Severely Plastic Deformed Aluminium Based Alloys via Different Processing Routes. Metals and Materials International 29:9, pages 2415-2443.
Crossref
Crossref
Olga A. Yakovtseva, Nadezhda B. Emelina, Andrey G. Mochugovskiy, Nataliya Yu. Tabachkova, Alexey S. Prosviryakov & Anastasia V. Mikhaylovskaya. (2023) Influence of Pre-Milling on the Mn Solid Solubility in the Al-Mn-Cu Alloy during Mechanical Alloying. Metals 13:4, pages 756.
Crossref
Crossref
Jijo Christudasjustus, Chathuranga Sandamal Witharamage, Venkata Bhuvaneswari Vukkum, Ganesh Walunj, Tushar Borkar & Rajeev Kumar Gupta. (2023) Surface Film Formation on Al-V Alloys with Far-From-Equilibrium Microstructure. Journal of The Electrochemical Society.
Crossref
Crossref
J. Christudasjustus, M.R. Felde, C.S. Witharamage, J. Esquivel, A.A. Darwish, C. Winkler & R.K. Gupta. (2023) Age-hardening behavior, corrosion mechanisms, and passive film structure of nanocrystalline Al-V supersaturated solid solution. Journal of Materials Science & Technology 135, pages 1-12.
Crossref
Crossref
Furkan Ozdemir & Rajeev K. Gupta. (2022) Influence of vanadium addition on corrosion behavior of high‐energy ball milled aluminum alloy 2024. Materials and Corrosion 74:2, pages 285-292.
Crossref
Crossref
F. Ozdemir, C.S. Witharamage, J. Christudasjustus, AA. Darwish, H. Okuyucu & R.K. Gupta. (2022) Corrosion behavior of a bulk nanocrystalline Al-Fe alloy. Corrosion Science 209, pages 110727.
Crossref
Crossref
Chathuranga S. Witharamage, Mohammed A. Alrizqi, Jijo Chirstudasjustus, Ahmed A. Darwish, Troy Ansell, Andy Nieto & Rajeev K. Gupta. (2022) Corrosion-resistant metallic coatings for aluminum alloys by cold spray. Corrosion Science 209, pages 110720.
Crossref
Crossref
Zhipeng Wang, Hui Xiao, Li Ma, Touwen Fan & Pingying Tang. (2022) Effects of rare-earth elements on twinning deformation of Al alloys from first-principles calculations. Solid State Communications 356, pages 114946.
Crossref
Crossref
Erick Cerqueira das Neves, Ezer Guimarães do Nascimento, Daiana Guerra Sacilotto, Jane Zoppas Ferreira, Jorge Luis Braz Medeiros, Luciano Volcanoglo Biehl, Guilherme Vieira Braga Lemos, Carlos Otávio Damas Martins & Diego Augusto de Jesus Pacheco. (2022) Nondestructive analysis of corrosion in ageing hardened AA6351 aluminium alloys. Materials Chemistry and Physics 291, pages 126664.
Crossref
Crossref
F. Ozdemir, J. Christudasjustus, V. B. Vukkum, H. Okuyucu & R. K. Gupta. (2022) Need of an Inert Atmosphere for High-Energy Ball Milling of Al Alloys. Journal of Materials Engineering and Performance.
Crossref
Crossref
J. Christudasjustus, C.S. Witharamage, Ganesh Walunj, T. Borkar & R.K. Gupta. (2022) The influence of spark plasma sintering temperatures on the microstructure, hardness, and elastic modulus of the nanocrystalline Al-xV alloys produced by high-energy ball milling. Journal of Materials Science & Technology 122, pages 68-76.
Crossref
Crossref
J. Christudasjustus, T. Larimian, J. Esquivel, S. Gupta, A.A. Darwish, T. Borkar & R.K. Gupta. (2022) Aluminum alloys with high elastic modulus. Materials Letters 320, pages 132292.
Crossref
Crossref
F. Layachi & M. Y. Debili. (2022) Structure and corrosion of Al-40 wt.% Nb-2 wt.% X alloys rapidly solidified from the melt. Journal of Applied Electrochemistry 52:8, pages 1259-1273.
Crossref
Crossref
Athanasios K. Sfikas, Sergio Gonzalez, Angeliki G. Lekatou, Spyros Kamnis & Alexandros E. Karantzalis. (2022) A Critical Review on Al-Co Alloys: Fabrication Routes, Microstructural Evolution and Properties. Metals 12:7, pages 1092.
Crossref
Crossref
Rafał Babilas, Katarzyna Młynarek-Żak, Wojciech Łoński, Dariusz Łukowiec, Tymon Warski & Adrian Radoń. (2022) Study of crystallization mechanism of Al-based amorphous alloys by in-situ high temperature X-ray diffraction method. Scientific Reports 12:1.
Crossref
Crossref
Jia Chen, Jianwei Xiao, Chang-Yu Hung, Wenbo Wang, Jing Zhao, F. Marc Michel, Chuang Deng & Wenjun Cai. (2022) Effects of alloying concentration on the aqueous corrosion and passivation of aluminum-manganese-molybdenum concentrated alloys. Corrosion Science 198, pages 110137.
Crossref
Crossref
Alexander D. Rud, Inna M. Kirian, Andrey M. Lakhnik, Andrii V. Kotko & Nickolay D. Rud. (2021) Synthesis of the metastable Al3Mg phase in Mg–Al–C system by mechanical alloying. Applied Nanoscience 12:3, pages 741-746.
Crossref
Crossref
C. S. Witharamage, J. Christudasjustus, J. Smith, W. Gao & R. K. Gupta. (2022) Corrosion behavior of an in situ consolidated nanocrystalline Al-V alloy. npj Materials Degradation 6:1.
Crossref
Crossref
N. Subramani, R. Haridass, R. Krishnan, D. Loganathan & N. Manikandan. (2022) Mechanical characterization of aluminium 6061 hybrid metal matrix composites. Materials Today: Proceedings 65, pages 3959-3965.
Crossref
Crossref
L. Esteves, J. Christudasjustus, S.P. O'Brien, C.S. Witharamage, A.A. Darwish, G. Walunj, P. Stack, T. Borkar, R.E. Akans & R.K. Gupta. (2021) Effect of V content on corrosion behavior of high-energy ball milled AA5083. Corrosion Science 186, pages 109465.
Crossref
Crossref
C. S. Witharamage, J. Christudasjustus & R. K. Gupta. (2021) The Effect of Milling Time and Speed on Solid Solubility, Grain Size, and Hardness of Al-V Alloys. Journal of Materials Engineering and Performance 30:4, pages 3144-3158.
Crossref
Crossref
S. P. O’Brien, J. Christudasjustus, L. Esteves, S. Vijayan, J. R. Jinschek, N. Birbilis & R. K. Gupta. (2021) A low-cost, low-density, and corrosion resistant AlFeMnSi compositionally complex alloy. npj Materials Degradation 5:1.
Crossref
Crossref
A. M. Panindre, Y. Khalifa, C. D. Taylor & G. S. Frankel. (2021) Corrosion of Ni-Fe-Cr-Mo-W-X Multi-Principal Element Alloys. Journal of The Electrochemical Society 168:3, pages 031513.
Crossref
Crossref
L. Esteves, C.S. Witharamage, J. Christudasjustus, G. Walunj, S.P. O'Brien, S. Ryu, T. Borkar, R.E. Akans & R.K. Gupta. (2021) Corrosion behavior of AA5083 produced by high-energy ball milling. Journal of Alloys and Compounds 857, pages 158268.
Crossref
Crossref
Mohammad Umar Farooq KhanTaban LarimianT. BorkarR.K. Gupta. (2020) Corrosion Behavior and Hardness of Binary Mg Alloys Produced via High-Energy Ball-Milling and Subsequent Spark Plasma Sintering. Corrosion 77:2, pages 228-241.
Crossref
Crossref
Ismael Santos-Ramos, Luis Bernardo López-Sosa, J. Zárate-Medina & Gerardo Rosas. (2020) Effect of 4 Wt% Magnesium on The Micro-hardness Of Aluminum Alloy Synthesized by Mechanical Milling. Microscopy and Microanalysis 26:S2, pages 2898-2901.
Crossref
Crossref
Zhipeng Wang, Chao Jiang, Qihong Fang, Feng Liu, Bin Liu, Touwen Fan, Li Ma & Pingying Tang. (2020) First-principles exploration of the stabilization mechanism of long-period stacking ordered structures in high performance Al alloys. Progress in Natural Science: Materials International 30:3, pages 424-431.
Crossref
Crossref
M.U.F. Khan, A. Patil, J. Christudasjustus, T. Borkar & R.K. Gupta. (2020) Spark plasma sintering of a high-energy ball milled Mg-10 wt% Al alloy. Journal of Magnesium and Alloys 8:2, pages 319-328.
Crossref
Crossref
Snehanshu Pal, K. Vijay Reddy & Douglas E. Spearot. (2020) Zr segregation in Ni–Zr alloy: implication on deformation mechanism during shear loading and bending creep. Journal of Materials Science 55:14, pages 6172-6186.
Crossref
Crossref
J. Esquivel & R. K. Gupta. (2020) Review—Corrosion-Resistant Metastable Al Alloys: An Overview of Corrosion Mechanisms. Journal of The Electrochemical Society 167:8, pages 081504.
Crossref
Crossref
Subramani Nanjan & Janakiram Ganesh Murali. (2020) Analysing the Mechanical Properties and Corrosion Phenomenon of Reinforced Metal Matrix Composite. Materials Research 23:2.
Crossref
Crossref
Tihomir Car, Krešimir Salamon, Nikola Radić & Jovica Ivkov. (2019) Elastic Energy Fraction as the Phenomenological Connection Between Electrical, Mechanical and Thermal Properties of the Al–(Nb, Mo, Ta, W) Amorphous Thin Films. Metals and Materials International 25:5, pages 1227-1234.
Crossref
Crossref
Y. Y. Chen, C. B. Lin & C. C. Mei. (2019) The Influence of Nickel Additions to Liquid A359 on Hot-Dip Aluminizing of Solid S45C Steel. Journal of Materials Engineering and Performance 28:8, pages 5195-5206.
Crossref
Crossref
Marta Orłowska, Ewa Ura-Bińczyk, Lech Olejnik & Małgorzata Lewandowska. (2019) The effect of grain size and grain boundary misorientation on the corrosion resistance of commercially pure aluminium. Corrosion Science 148, pages 57-70.
Crossref
Crossref
M.U.F. Khan, F. Mirza & R.K. Gupta. (2018) High hardness and thermal stability of nanocrystalline Mg–Al alloys synthesized by the high-energy ball milling. Materialia 4, pages 406-416.
Crossref
Crossref
J. Esquivel & R.K. Gupta. (2018) Influence of the V content on microstructure and hardness of high-energy ball milled nanocrystalline Al-V alloys. Journal of Alloys and Compounds 760, pages 63-70.
Crossref
Crossref
J. Esquivel, K. A. Darling, H. A. Murdoch & R. K. Gupta. (2018) Corrosion and Mechanical Properties of Al-5 At. Pct Cr Produced by Cryomilling and Subsequent Consolidation at Various Temperatures. Metallurgical and Materials Transactions A 49:7, pages 3058-3065.
Crossref
Crossref
J. Esquivel, M.G. Wachowiak, S.P. O'Brien & R.K. Gupta. (2018) Thermal stability of nanocrystalline Al-5at.%Ni and Al-5at.%V alloys produced by high-energy ball milling. Journal of Alloys and Compounds 744, pages 651-657.
Crossref
Crossref