Advanced search
Publication Cover
Advances in Materials and Processing Technologies Volume 6, 2020 - Issue 2: Special Issue on Materials Processing and Characterisation (ICMPC)
Submit an article Journal homepage
97
Views
12
CrossRef citations to date
0
Altmetric
Research Article

Effect of stirrer design on microstructure of MWCNT and Al alloy by stir casting process

Ashish KumarDepartment of Mechanical Engineering, Maulana Azad National Institute of Technology, Bhopal, IndiaCorrespondence[email protected]
,
Ravindra Singh RanaDepartment of Mechanical Engineering, Maulana Azad National Institute of Technology, Bhopal, India
&
Rajesh PurohitDepartment of Mechanical Engineering, Maulana Azad National Institute of Technology, Bhopal, India
Pages 320-327 | Accepted 13 Feb 2020, Published online: 24 Feb 2020

Citations (12)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

Farooq Muhammad & Shawnam Jalal. (2023) Optimization of stirrer parameters by Taguchi method for a better ceramic particle stirring performance in the production of Aluminum Alloy Matrix Composite. Cogent Engineering 10:1.
Read now
Nagaraja T K & Sasidhar Jangam. (2023) Developing a steady state wear equation for AA7050 hybrid composites/steel interface at elevated temperature. Advances in Materials and Processing Technologies 0:0, pages 1-16.
Read now
Sunday A. Afolalu, Omolayo M. Ikumapayi, Adebayo T. Ogundipe, Osise O. Okwilagwe, Olamilekan R. Oloyede & Adeyinka O. M. Adeoye. (2022) Development of composite filters from biochars for wastewater treatment. Advances in Materials and Processing Technologies 8:sup4, pages 2332-2349.
Read now
R. Raja, Lijin George, Sabitha Jannet, Prudthvi Vijay Simha I & Sumanth K Ratna. (2022) Development and analysis of SiC, TiO2, and Biochar hybrid reinforced aluminium-based metal matrix composite. Advances in Materials and Processing Technologies 8:sup3, pages 1485-1493.
Read now
Ashish Kumar, Ravindra Singh Rana & Rajesh Purohit. (2022) Tribological Analysis and Characterization of Zinc Rich Al/Si3N4 Composites Fabricated Via Ultrasonic Assisted Stir Casting Technique. Advances in Materials and Processing Technologies 8:sup2, pages 941-953.
Read now
Venkatesan S, Giridharan P. K.Sivakumar N S, Sharavanan S, Ram Subbiah & Senthamilselvi A. (2022) Tribological behaviour of AA7168 hybrid composite sheets for aerospace structures fabricated through COMPO casting. Advances in Materials and Processing Technologies 8:sup2, pages 402-410.
Read now
Manjunath Naik H R, Manjunath L H, Vinayak Malik, Manjunath Patel GC, Kuldeep K Saxena & Avinash Lakshmikanthan. (2022) Effect of microstructure, mechanical and wear on Al-CNTs/graphene hybrid MMC’S. Advances in Materials and Processing Technologies 8:sup2, pages 366-379.
Read now
V. K. Parikh, V. J. Badheka, A. D. Badgujar & N. D. Ghetiya. (2021) Fabrication and processing of aluminum alloy metal matrix composites. Materials and Manufacturing Processes 36:14, pages 1604-1617.
Read now
Raja Thiyagarajan & M. Senthil kumar. (2021) A Review on Closed Cell Metal Matrix Syntactic Foams: A Green Initiative towards Eco-Sustainability. Materials and Manufacturing Processes 36:12, pages 1333-1351.
Read now

Articles from other publishers (3)

K N Uday & G Rajamurugan. (2023) Analysis of tensile strength on friction stir welded Al 6061 composite reinforced with B 4 C and Cr 2 O 3 using RSM and ANN . Engineering Research Express 5:1, pages 015018.
Crossref
Ashish Kumar, Ravindra Singh Rana, Rajesh Purohit, Anurag Namdev & Madhusudan Baghel. 2023. Recent Trends in Nanotechnology for Sustainable Living and Environment. Recent Trends in Nanotechnology for Sustainable Living and Environment 221 234 .
B. R. Senthil Kumar, G. Gopalarama Subramaniyan, N. Pragadish, P. M. Venkatesh, Soni Sanjay, C. M. Velu, G. Navaneethakrishnan, Suresh Vellingiri & Venkatesan Govindarajan. (2022) Investigations on Wear Behavior of Aluminium Composites at Elevated Temperature. Advances in Materials Science and Engineering 2022, pages 1-7.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.