Advanced search
Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 44, 2003 - Issue 8
Submit an article Journal homepage
314
Views
55
CrossRef citations to date
0
Altmetric
Original Articles

OPTIMIZATION OF PIN-FIN HEAT SINKS USING ANISOTROPIC LOCAL THERMAL NONEQUILIBRIUM POROUS MODEL IN A JET IMPINGING CHANNEL

Seo Young Kim Thermal/Flow Control Research Center, Korea Institute of Science and Technology, Seoul, Korea
&
Andrey V. Kuznetsov Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, North Carolina, USA
Pages 771-787 | Published online: 02 Feb 2011

Citations (55)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

MarceloJ. S. de Lemos & FelipeT. Dórea. (2011) Simulation of a Turbulent Impinging Jet into a Layer of Porous Material Using a Two–Energy Equation Model. Numerical Heat Transfer, Part A: Applications 59:10, pages 769-798.
Read now
Cleges Fischer & MarceloJ. S. de Lemos. (2010) A Turbulent Impinging Jet on a Plate Covered with a Porous Layer. Numerical Heat Transfer, Part A: Applications 58:6, pages 429-456.
Read now
Tien-Mo Shih, Chandrasekhar Thamire, Chao-Ho Sung & An-Lu Ren. (2010) Literature Survey of Numerical Heat Transfer (2000–2009): Part I. Numerical Heat Transfer, Part A: Applications 57:3-4, pages 159-296.
Read now
Yue-Tzu Yang & Huan-Sen Peng. (2009) Numerical Study of Thermal and Hydraulic Performance of Compound Heat Sink. Numerical Heat Transfer, Part A: Applications 55:5, pages 432-447.
Read now
MarceloJ. S. de Lemos & Cleges Fischer. (2008) Thermal Analysis of an Impinging Jet on a Plate With and Without a Porous Layer. Numerical Heat Transfer, Part A: Applications 54:11, pages 1022-1041.
Read now
Maxime Tye-Gingras & Louis Gosselin. (2008) Thermal Resistance Minimization of a Fin-and-Porous-Medium Heat Sink with Evolutionary Algorithms. Numerical Heat Transfer, Part A: Applications 54:4, pages 349-366.
Read now
DanielR. Graminho & MarceloJ. S. de Lemos. (2008) Laminar Confined Impinging Jet into a Porous Layer. Numerical Heat Transfer, Part A: Applications 54:2, pages 151-177.
Read now
Nuri Yucel & R. Tolga Guven. (2007) Forced-Convection Cooling Enhancement of Heated Elements in a Parallel-Plate Channels using Porous Inserts. Numerical Heat Transfer, Part A: Applications 51:3, pages 293-312.
Read now
S. Z. Shuja, B. S. Yilbas & M. O. Budair. (2005) Influence of Conical and Annular Nozzle Geometric Configurations on Flow and Heat Transfer Characteristics due to Flow Impingement onto a Flat Plate. Numerical Heat Transfer, Part A: Applications 48:9, pages 917-939.
Read now

Articles from other publishers (46)

Taehoon Kim, Yong-Shik Han, Hwalong You, Changhyun Kim, Minchang Kim, Byung-Il Choi & Kyu Hyung Do. (2023) Pressure drop and thermal resistance characteristics of plain-fin heat sink with impingement flow. International Journal of Thermal Sciences 194, pages 108598.
Crossref
James K. Arthur. (2023) A narrow-channeled backward-facing step flow with or without a pin–fin insert: Flow in the separated region. Experimental Thermal and Fluid Science 141, pages 110791.
Crossref
Kleber Marques Lisboa, José Luiz Zanon Zotin, Carolina P. Naveira-Cotta & Renato Machado Cotta. (2021) Leveraging the entropy generation minimization and designed porous media for the optimization of heat sinks employed in low-grade waste heat harvesting. International Journal of Heat and Mass Transfer 181, pages 121850.
Crossref
Piyush Pratap Singh, Mohit Trivedi, Tarak Mondal & Neelknath Nirmalkar. (2021) A novel strategy to enhance the cooling effectiveness in a confined porous jet impingement using non-Newtonian fluids. International Communications in Heat and Mass Transfer 126, pages 105362.
Crossref
Sujoy Kumar Saha, Hrishiraj Ranjan, Madhu Sruthi Emani & Anand Kumar BhartiSujoy Kumar Saha, Hrishiraj Ranjan, Madhu Sruthi Emani & Anand Kumar Bharti. 2020. Heat Transfer Enhancement in Plate and Fin Extended Surfaces. Heat Transfer Enhancement in Plate and Fin Extended Surfaces 89 135 .
Yabo Wang, Kai Zhu, Zhuo Cui, Hailong Li & Jie Wei. (2019) Evaluation of Water Cooling Heat Sink Performance and Dynamic flow effect. Energy Procedia 158, pages 2417-2422.
Crossref
Md. Farhad Ismail & Suvash C. Saha. 2018. Application of Thermo-fluid Processes in Energy Systems. Application of Thermo-fluid Processes in Energy Systems 231 243 .
Amir Taheri, Erik Lindeberg, Ole Torsæter & Dag Wessel-Berg. (2017) Qualitative and quantitative experimental study of convective mixing process during storage of CO 2 in homogeneous saline aquifers. International Journal of Greenhouse Gas Control 66, pages 159-176.
Crossref
Tae Hoon Kim, Kyu Hyung Do & Sung Jin Kim. (2017) Closed-form correlations of pressure drop and thermal resistance for a plate fin heat sink with uniform air jet impingement. Energy Conversion and Management 136, pages 340-349.
Crossref
J. C. Umavathi & Maurizio Sasso. Double diffusive convection in a porous medium layer saturated with an Oldroyd nanofluid. Double diffusive convection in a porous medium layer saturated with an Oldroyd nanofluid.
J.C. Umavathi, Odelu Ojjela & K. Vajravelu. (2017) Numerical analysis of natural convective flow and heat transfer of nanofluids in a vertical rectangular duct using Darcy-Forchheimer-Brinkman model. International Journal of Thermal Sciences 111, pages 511-524.
Crossref
Donald A. Nield & Adrian BejanDonald A. Nield & Adrian Bejan. 2017. Convection in Porous Media. Convection in Porous Media 85 160 .
Fatemeh Tavakkoli, Siavash Ebrahimi, Shujuan Wang & Kambiz Vafai. (2016) Thermophysical and Geometrical Effects on the Thermal Performance and Optimization of a Three-Dimensional Integrated Circuit. Journal of Heat Transfer 138:8.
Crossref
Bernardo Buonomo, Oronzio Manca & Sergio Nardini. 2015. Handbook of Porous Media, Third Edition. Handbook of Porous Media, Third Edition 631 662 .
Amir Taheri, Dag Wessel-Berg & Ole Tors?ter. (2015) Prediction of the Minimum Onset Time for Convection in a Gravitationally Unstable Diffusive Boundary Layer Using a Finite Difference Pressure Solver. Prediction of the Minimum Onset Time for Convection in a Gravitationally Unstable Diffusive Boundary Layer Using a Finite Difference Pressure Solver.
Turkuler Ozgumus & Moghtada Mobedi. (2015) Effect of Pore to Throat Size Ratio on Interfacial Heat Transfer Coefficient of Porous Media. Journal of Heat Transfer 137:1.
Crossref
Gazy F. Al-Sumaily. (2014) Forced Convection Heat Transfer From a Bank of Circular Cylinders Embedded in a Porous Medium. Journal of Heat Transfer 136:4.
Crossref
A. Barletta, M. Celli & A. V. Kuznetsov. (2014) Convective Instability of the Darcy Flow in a Horizontal Layer With Symmetric Wall Heat Fluxes and Local Thermal Nonequilibrium. Journal of Heat Transfer 136:1.
Crossref
Abbasali Abouei Mehrizi, Mousa Farhadi, Kurosh Sedighi & Amir Latif Aghili. (2013) Lattice Boltzmann Simulation of Heat Transfer Enhancement in a Cold Plate Using Porous Medium. Journal of Heat Transfer 135:11.
Crossref
B. S. Bhadauria & Palle Kiran. (2013) Heat Transport in an Anisotropic Porous Medium Saturated with Variable Viscosity Liquid Under Temperature Modulation. Transport in Porous Media 100:2, pages 279-295.
Crossref
Akin Burak Etemoglu & Muhiddin Can. (2013) Performance studies of energy consumption for single and multiple nozzle systems under impinging air jets. Heat and Mass Transfer 49:8, pages 1057-1070.
Crossref
Yang Lihong, Gan Yi & Liu Ping. (2013) Study on heat transfer of porous media for isothermal chamber. Experimental Thermal and Fluid Science 46, pages 46-53.
Crossref
Radhe Shyam & R.P. Chhabra. (2013) Effect of Prandtl number on heat transfer from tandem square cylinders immersed in power-law fluids in the low Reynolds number regime. International Journal of Heat and Mass Transfer 57:2, pages 742-755.
Crossref
Christopher S. Roper, Kathryn D. Fink, Samuel T. Lee, Joanna A. Kolodziejska & Alan J. Jacobsen. (2012) Anisotropic convective heat transfer in microlattice materials. AIChE Journal 59:2, pages 622-629.
Crossref
S.S. Feng, T. Kim & T.J. Lu. (2013) Numerical investigation of forced convection in pin/plate‐fin heat sinks heated by impinging jet using porous medium approach. International Journal of Numerical Methods for Heat & Fluid Flow 23:1, pages 88-107.
Crossref
Owen Sengstock & Kamel Hooman. (2012) Heat Transfer Enhancement From a Blade Tip-Cap Using Metal Foams. Journal of Heat Transfer 134:11.
Crossref
G.R. Imani, M. Maerefat & K. Hooman. (2012) Estimation of heat flux bifurcation at the heated boundary of a porous medium using a pore-scale numerical simulation. International Journal of Thermal Sciences 54, pages 109-118.
Crossref
Siwadol Kanyakam & Sujin Bureerat. (2012) Comparative Performance of Surrogate-Assisted MOEAs for Geometrical Design of Pin-Fin Heat Sinks. Journal of Applied Mathematics 2012, pages 1-14.
Crossref
Marcelo J.S. de LemosMarcelo J. S. de Lemos. 2012. Turbulent Impinging Jets into Porous Materials. Turbulent Impinging Jets into Porous Materials 1 6 .
A. V. Kuznetsov & D. A. Nield. (2010) The Onset of Double-Diffusive Nanofluid Convection in a Layer of a Saturated Porous Medium. Transport in Porous Media 85:3, pages 941-951.
Crossref
S. Izquierdo, J. R. Valdés, M. Martínez, M. Accolti, S. Woudberg, P. Asinari, M. Miana & J. P. Du Plessis. (2010) Porous-layer model for laminar liquid flow in rough microchannels. Microfluidics and Nanofluidics 9:6, pages 1063-1075.
Crossref
Felipe T. Dórea & Marcelo J.S. de Lemos. (2010) Simulation of laminar impinging jet on a porous medium with a thermal non-equilibrium model. International Journal of Heat and Mass Transfer 53:23-24, pages 5089-5101.
Crossref
A. Zehforoosh & S. Hossainpour. (2010) Numerical investigation of pressure drop reduction without surrendering heat transfer enhancement in partially porous channel. International Journal of Thermal Sciences 49:9, pages 1649-1662.
Crossref
Tzer-Ming Jeng, Sheng-Chung Tzeng & Chia-Wei Chang. (2010) Forced convection of the brass-beads packed bed situated in a vertical oncoming flow. International Journal of Thermal Sciences 49:5, pages 829-837.
Crossref
Kyu Hyung Do, Tae Hoon Kim & Sung Jin Kim. (2010) Analytical and experimental investigations on fluid flow and thermal characteristics of a plate-fin heat sink subject to a uniformly impinging jet. International Journal of Heat and Mass Transfer 53:9-10, pages 2318-2323.
Crossref
A.A. Alshare, T.W. Simon & P.J. Strykowski. (2010) Simulations of flow and heat transfer in a serpentine heat exchanger having dispersed resistance with porous-continuum and continuum models. International Journal of Heat and Mass Transfer 53:5-6, pages 1088-1099.
Crossref
Tae Young Kim & Sung Jin Kim. (2009) Fluid flow and heat transfer characteristics of cross-cut heat sinks. International Journal of Heat and Mass Transfer 52:23-24, pages 5358-5370.
Crossref
Azadeh Ejlali, Arash Ejlali, Kamel Hooman & Hal Gurgenci. (2009) Application of high porosity metal foams as air-cooled heat exchangers to high heat load removal systems. International Communications in Heat and Mass Transfer 36:7, pages 674-679.
Crossref
Daniel R. Graminho & Marcelo J.S. de Lemos. (2009) Simulation of turbulent impinging jet into a cylindrical chamber with and without a porous layer at the bottom. International Journal of Heat and Mass Transfer 52:3-4, pages 680-693.
Crossref
Tzer-Ming Jeng, Sheng-Chung Tzeng & Tung-Chun Liu. (2008) Heat transfer behavior in a rotating aluminum foam heat sink with a circular impinging jet. International Journal of Heat and Mass Transfer 51:5-6, pages 1205-1215.
Crossref
Hung-Yi Li, Ming-Hung Chiang & Kuan-Ying Chen. (2007) Performance Analysis of Pin-Fin Heat Sinks With Confined Impingement Cooling. IEEE Transactions on Components and Packaging Technologies 30:3, pages 383-389.
Crossref
Tzer-Ming Jeng & Sheng-Chung Tzeng. (2007) Pressure drop and heat transfer of square pin-fin arrays in in-line and staggered arrangements. International Journal of Heat and Mass Transfer 50:11-12, pages 2364-2375.
Crossref
Hung-Yi Li & Kuan-Ying Chen. (2007) Thermal performance of plate-fin heat sinks under confined impinging jet conditions. International Journal of Heat and Mass Transfer 50:9-10, pages 1963-1970.
Crossref
Philippe Wildi-Tremblay & Louis Gosselin. (2007) Layered porous media architecture for maximal cooling. International Journal of Heat and Mass Transfer 50:3-4, pages 464-478.
Crossref
R.J. Goldstein, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S. Garrick & V. Srinivasan. (2006) Heat transfer—A review of 2003 literature. International Journal of Heat and Mass Transfer 49:3-4, pages 451-534.
Crossref
D.A.S. REES & I. POP. 2005. Transport Phenomena in Porous Media III. Transport Phenomena in Porous Media III 147 173 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.