Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 16, 2001 - Issue 2
Submit an article Journal homepage
103
Views
17
CrossRef citations to date
0
Altmetric
Original Articles

INFLUENCE OF AUSTEMPERING TEMPERATURE ON FRACTURE TOUGHNESS OF A LOW MANGANESE AUSTEMPERED DUCTILE IRON (ADI)

Susil K. Putatunda Department of Chemical Engineering and Materials Science, Wayne State University, 5050 Anthony Wayne Drive, Detroit, Michigan, 48202, U.S.A.
Pages 245-263 | Published online: 15 Aug 2006

Citations (17)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (6)

S. Balos, D. Rajnovic, M. Dramicanin, D. Labus, O. Eric-Cekic, J. Grbovic-Novakovic & L. Sidjanin. (2016) Abrasive wear behaviour of ADI material with various retained austenite content. International Journal of Cast Metals Research 29:4, pages 187-193.
Read now
Armindo Werlang Filho, Bruno Vaz de Souza & Carlos Alexandre dos Santos. (2015) Effect of Heat Treatments on Austempered Ductile Iron. Materials and Manufacturing Processes 30:11, pages 1317-1323.
Read now
V. Kilicli & M. Erdogan. (2007) Effect of ausferrite volume fraction and morphology on tensile properties of partially austenitised and austempered ductile irons with dual matrix structures. International Journal of Cast Metals Research 20:4, pages 202-214.
Read now
V. Kilicli & M. Erdogan. (2006) Tensile properties of partially austenitised and austempered ductile irons with dual matrix structures. Materials Science and Technology 22:8, pages 919-928.
Read now
Danilo Rojko & Vladimir Gliha. (2005) Simulations of Transformation Kinetics in a Multi-Pass Weld. Materials and Manufacturing Processes 20:5, pages 833-849.
Read now
Susil K. Putatunda. (2001) AUSTEMPERING OF A SILICON MANGANESE CAST STEEL. Materials and Manufacturing Processes 16:6, pages 743-762.
Read now

Articles from other publishers (11)

Regita Bendikiene, Antanas Ciuplys, Ramunas Cesnavicius, Audrius Jutas, Aliaksandr Bahdanovich, Dzianis Marmysh, Aleh Nasan, Liudmila Shemet & Sergei Sherbakov. (2021) Influence of Austempering Temperatures on the Microstructure and Mechanical Properties of Austempered Ductile Cast Iron. Metals 11:6, pages 967.
Crossref
Ranjan Kumar Behera, Sudipta Sen & Subash Chandra Mishra. 2019. Hysteresis of Composites. Hysteresis of Composites.
Vinayak Dakre, D. R. Peshwe, S. U. Pathak & Ajay Likhite. (2019) TEM Analysis of Austempered Ductile Iron Processed Through Conventional and Two-Step Austempering Process. Transactions of the Indian Institute of Metals 72:4, pages 911-917.
Crossref
A.A. Barnabas, A. Oyetunji, S.O. Seidu & A.A. Adediran. (2018) Carbidic Austempered Ductile Iron an Off-spring of Cast Iron for Production of Agricultural Implement: A Review. Journal of Environmental Science and Technology 12:1, pages 10-16.
Crossref
Jhewn-Kuang Chen, Bi-Ting Chen & Jui-Shen Tsai. (2016) Microstructural Evolutions and Properties of Partially Austenitizing and Austempered Ductile Irons. steel research international 87:2, pages 191-198.
Crossref
Olivera Eric Cekic, Leposava Sidjanin, Dragan Rajnovic & Sebastian Balos. (2014) Austempering kinetics of Cu-Ni alloyed austempered Ductile Iron. Metals and Materials International 20:6, pages 1131-1138.
Crossref
İsmail Ovalıa & Ahmet Mavib. (2013) Investigating the machinability of austempered ductile irons with dual matrix structures. International Journal of Materials Research 104:2, pages 192-198.
Crossref
Volkan Kilicli & Mehmet Erdogan. (2009) The Nature of the Tensile Fracture in Austempered Ductile Iron with Dual Matrix Microstructure. Journal of Materials Engineering and Performance 19:1, pages 142-149.
Crossref
Mehmet Erdogan, Volkan Kilicli & Bilge Demir. (2009) Transformation characteristics of ductile iron austempered from intercritical austenitizing temperature ranges. Journal of Materials Science 44:5, pages 1394-1403.
Crossref
Mehmet Erdogan, Volkan Kilicli & Bilge Demir. (2008) The influence of the austenite dispersion on phase transformation during the austempering of ductile cast iron having a dual matrix structure. International Journal of Materials Research 99:7, pages 751-760.
Crossref
Y. Sahin, M. Erdogan & V. Kilicli. (2007) Wear behavior of austempered ductile irons with dual matrix structures. Materials Science and Engineering: A 444:1-2, pages 31-38.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.