Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 18, 2003 - Issue 4
Submit an article Journal homepage
181
Views
16
CrossRef citations to date
0
Altmetric
Miscellany

Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction Welds

M. Shamanian Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
,
M. Salehi Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran; Department of Materials Engineering, Isfahan University of Technology, Isfahan, 84154, IranCorrespondence[email protected]
,
A. Saatchi Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
&
T. H. North Department of Materials Engineering, University of Toronto, Ontario, Canada
Pages 581-598 | Published online: 31 Aug 2006

Citations (16)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

M. Balasubramanian, R. Kumar & S. Gopinath. (2020) Multi-objective optimisation of friction welding parameters in joining titanium alloy and stainless steel with a novel interlayer geometry. Advances in Materials and Processing Technologies 6:1, pages 25-39.
Read now
U. Prisco, A. Astarita, A. El Hassanin & S. Franchitti. (2019) Influence of processing parameters on microstructure and roughness of electron beam melted Ti-6Al-4V titanium alloy. Materials and Manufacturing Processes 34:15, pages 1753-1760.
Read now
Jia Ju, Feng Xue, Jian Zhou, Jing Bai & Liuxia Sun. (2016) Interface and Bond Strength of Brazing Cemented Carbide K20 to Alloy Steel AISI 4140 by High-Frequency Induction. Materials and Manufacturing Processes 31:8, pages 1052-1060.
Read now
N. Al-Aqeeli, K. Mohammad, T. Laoui & N. Saheb. (2015) The Effect of Variable Binder Content and Sintering Temperature on the Mechanical Properties of WC–Co–VC/Cr3C2 Nanocomposites. Materials and Manufacturing Processes 30:3, pages 327-334.
Read now

Articles from other publishers (12)

Yafei Pan, Xiaolong Yang, Zhenyao Fan, Dawei Liu, Jiuxing Zhang, Siyao Xie, Yong Du, Fenghua Luo & Lei Huang. (2023) Effect of Ni Interlayer Thickness on the Welding Morphology and Mechanical Properties of SPS Diffusion-Welded YG8/40Cr Joints. Journal of Materials Engineering and Performance.
Crossref
Lingyu Chen, Zhongning Guo, Chong Zhang, Chunyan Wu, Yuanbo Li, Yuzhen Jia & Guoyue Liu. (2021) Effects of Ni coating thickness on the microstructure and mechanical properties of resistance-welded WC-Co/B318 steel joints. Ceramics International 47:18, pages 25634-25644.
Crossref
M. Balasubramanian, S. Murali, C. Hemadri & R. Kumar. (2021) A new method of dissimilar friction welding of titanium to stainless steel. Materials Today: Proceedings 46, pages 3644-3647.
Crossref
M. Balasubramanian & R. Kumar. (2020) Introduction of new surface geometry to join Ti-6Al-4V and SS304L by friction welding. Multidiscipline Modeling in Materials and Structures 16:5, pages 1233-1244.
Crossref
R. Kumar & M. Balasubramanian. (2020) Analysis and comparison of diffusion bonded and friction welded Ti-6Al-4V and stainless steel joints with copper as interlayer. Materials Today: Proceedings 21, pages 1467-1473.
Crossref
Chao Jiang, Hui Chen, Xu Zhao, Sifu Qiu, Dengquan Han & Guoqing Gou. (2018) Microstructure and mechanical properties of brazing bonded WC-15Co/35CrMo joint using AgNi/CuZn/AgNi composite interlayers. International Journal of Refractory Metals and Hard Materials 70, pages 1-8.
Crossref
R. KUMAR & M. BALASUBRAMANIAN. (2016) CHARACTERIZATION OF FRICTION WELDED TITANIUM ALLOY AND STAINLESS STEEL WITH A NOVEL INTERLAYER GEOMETRY. Surface Review and Letters 24:05, pages 1750064.
Crossref
R. KUMAR & M. BALASUBRAMANIAN. (2015) Application of response surface methodology to optimize process parameters in friction welding of Ti–6Al–4V and SS304L rods. Transactions of Nonferrous Metals Society of China 25:11, pages 3625-3633.
Crossref
R. Kumar & M. Balasubramanian. (2015) Comparative Study of Ti Alloy and Stainless Steel 304L Friction Welded Joint with Different Interlayer Process Methods. Applied Mechanics and Materials 766-767, pages 739-744.
Crossref
R. Kumar & M. Balasubramanian. (2015) Experimental investigation of Ti–6Al–4V titanium alloy and 304L stainless steel friction welded with copper interlayer. Defence Technology 11:1, pages 65-75.
Crossref
P. Q. Xu & X. J. Zhao. (2009) Analysis of Microstructure and Properties of Cemented Carbide and Invar Alloy Weldment. Journal of Materials Engineering and Performance 19:2, pages 294-300.
Crossref
Xu Peiquan, Zhao Xiujuan, Yang Dexin & Yao Shun. (2005) Study on filler metal (Ni-Fe-C) during GTAW of WC-30Co to 45″ carbon steel. Journal of Materials Science 40:24, pages 6559-6564.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.