Citations (23)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (2)
Elena Bassoli, Paolo Minetola & Alessandro Salmi. (2011) High-Speed Milling of Tool Steel Dies for Aluminium Extrusion: Surface Roughness, Dimensional Tolerance and Chip Removal Mechanisms. Materials and Manufacturing Processes 26:5, pages 764-769.
Read now
Read now
S.Z. Qamar. (2010) Shape Complexity, Metal Flow, and Dead Metal Zone in Cold Extrusion. Materials and Manufacturing Processes 25:12, pages 1454-1461.
Read now
Read now
Articles from other publishers (21)
S Rebeggiani, M Bergman, B-G Rosén & L Eriksson. (2023) On communicating extruded aluminium surface quality along the supply chain – a customer approach to sustainable surfaces. Surface Topography: Metrology and Properties 11:1, pages 014013.
Crossref
Crossref
Xiaoyuan Chen, Qiang Li, Shan Jiang, Mingshun Zhang, Lin Fu & Boyang Shen. (2022) A novel combo‐transmission system of cold energy and electricity for aluminium profile production: Using liquid nitrogen and superconductor technologies. Energy Science & Engineering 11:2, pages 838-848.
Crossref
Crossref
Chi Wee Tan, Joren Mundane Antequisa Pacaldo, Wah Pheng Lee, Gloria Jennis Tan, Siaw Lang Wong & Jun Kit Chaw. 2023. Machine Learning and Intelligent Communication. Machine Learning and Intelligent Communication
39
49
.
H. M. Vishwanatha, M. K. Swetha, Vijeesh Vijayan, Kuldeep Saxena & Ajit Behera. (2022) An investigation on the cause for the formation of blisters in the extruded aluminum channels for ladder application. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Riccardo Pelaccia & Paolo E. Santangelo. (2022) A Homogeneous Flow Model for nitrogen cooling in the aluminum-alloy extrusion process. International Journal of Heat and Mass Transfer 195, pages 123202.
Crossref
Crossref
Ivan Kniazkin. (2022) Prediction of Underfilling Defect in Aluminium Profile Extrusion Based on ALE Simulation. Key Engineering Materials 926, pages 537-544.
Crossref
Crossref
Riccardo Pelaccia, Barbara Reggiani, Marco Negozio & Lorenzo Donati. (2022) Liquid nitrogen in the industrial practice of hot aluminium extrusion: experimental and numerical investigation. The International Journal of Advanced Manufacturing Technology 119:5-6, pages 3141-3155.
Crossref
Crossref
Josiah Cherian Chekotu, Sayyad Zahid Qamar & Sayyad Basim Qamar. 2022. Proceedings of the 9th International Conference on Fracture, Fatigue and Wear. Proceedings of the 9th International Conference on Fracture, Fatigue and Wear
149
157
.
Keyu Chen, Zhaoyang Zeng & Jianfei Yang. (2021) A deep region-based pyramid neural network for automatic detection and multi-classification of various surface defects of aluminum alloys. Journal of Building Engineering 43, pages 102523.
Crossref
Crossref
Fabio Conti, Chiara Conese, Maurizio Colombo, Luca Maggioni, Giovanni Moschioni & Marco Tarabini. (2021) Vibration Signals for Condition Based Maintenance of Hydraulic Valves. Vibration Signals for Condition Based Maintenance of Hydraulic Valves.
Felix M. Neuhauser, Gregor Bachmann & Pavel Hora. (2019) Surface defect classification and detection on extruded aluminum profiles using convolutional neural networks. International Journal of Material Forming 13:4, pages 591-603.
Crossref
Crossref
A.F. Ferrás, F. De Almeida, E. Costa e Silva, A. Correia & F.J.G. Silva. (2019) Scrap production of extruded aluminum alloys by direct extrusion. Procedia Manufacturing 38, pages 1731-1740.
Crossref
Crossref
Pallavi Sharma, Suresh Chander Malik, Anshu Gupta & P.C. Jha. (2018) A DMAIC Six Sigma approach to quality improvement in the anodising stage of the amplifier production process. International Journal of Quality & Reliability Management 35:9, pages 1868-1880.
Crossref
Crossref
Andrea Ciuffini, Silvia Barella, Cosmo Di Cecca, Andrea Gruttadauria, Carlo Mapelli, Luca Merello, Giacomo Mainetti & Massimo Bertoletti. (2018) Surface Quality Improvement of AA6060 Aluminum Extruded Components through Liquid Nitrogen Mold Cooling. Metals 8:6, pages 409.
Crossref
Crossref
Sayyad Qamar, Tasneem Pervez & Josiah Chekotu. (2018) Die Defects and Die Corrections in Metal Extrusion. Metals 8:6, pages 380.
Crossref
Crossref
Sayyad Zahid Qamar. 2018. Extrusion of Metals, Polymers and Food Products. Extrusion of Metals, Polymers and Food Products.
Laith A. Hadidi, Abdulaziz Bubshait & Suleiman Khreishi. (2017) Six Sigma for improving aesthetic defects in aluminum profiles facility. Facilities 35:3/4, pages 242-267.
Crossref
Crossref
Apostolos Chondronasios, Ivan Popov & Ivan Jordanov. (2015) Feature selection for surface defect classification of extruded aluminum profiles. The International Journal of Advanced Manufacturing Technology 83:1-4, pages 33-41.
Crossref
Crossref
R. K. Sahoo, P. R. Samantaray, S. K. Sahoo, B. Sahoo & P. K. Kar. (2008) Round-to-channel section extrusion through linearly converging die: a three-dimensional analysis. The International Journal of Advanced Manufacturing Technology 41:7-8, pages 677-683.
Crossref
Crossref
B.J. Kim, K.H. Choi, K.S. Park, Chester J. van Tyne & Young Hoon Moon. (2007) Effect of the Surface Defects on Hydroformability of Aluminum Alloys. Key Engineering Materials 340-341, pages 587-592.
Crossref
Crossref
J.S. Ajiboye & M.B. Adeyemi. (2007) Upper bound analysis for extrusion at various die land lengths and shaped profiles. International Journal of Mechanical Sciences 49:3, pages 335-351.
Crossref
Crossref