Citations (27)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Dhaval Makwana, Bhingole Pramod, Paritosh Chaudhari & C. S. Sasmal. (2022) Processing of bioresorbable closed-cell Mg foam for bone implant applications. Materials and Manufacturing Processes 0:0, pages 1-9.
Read now
Read now
Raja Thiyagarajan & M. Senthil kumar. (2021) A Review on Closed Cell Metal Matrix Syntactic Foams: A Green Initiative towards Eco-Sustainability. Materials and Manufacturing Processes 36:12, pages 1333-1351.
Read now
Read now
M. Barletta, S. Guarino, R. Montanari & V. Tagliaferri. (2007) Metal foams for structural applications: design and manufacturing. International Journal of Computer Integrated Manufacturing 20:5, pages 497-504.
Read now
Read now
Articles from other publishers (24)
A. Changdar & S. S. Chakraborty. 2023. Advances in Forming, Machining and Automation. Advances in Forming, Machining and Automation
127
142
.
Linsea Paradis, Daudi Waryoba, Kyle Robertson, Arnaud Ndayishimiye, Zhongming Fan, Ramakrishnan Rajagopalan & Clive A. Randall. (2022) Densification and Strengthening of Ferrous‐Based Powder Compacts Through Cold Sintering Aided Warm Compaction. Advanced Engineering Materials 24:12.
Crossref
Crossref
M. R. Farahani, H. R. Rezaei Ashtiani & S. H. Elahi. (2022) The Effect of Adding Silicon and Zinc Elements on the Mechanical Properties of Closed-Cell Aluminum-Based Foams. International Journal of Metalcasting.
Crossref
Crossref
Pradeep Singh, Vikas Shrivastava, I. B. Singh & D. P. Mondal. (2021) Effect of Mechanical Alloying and Sintering Environment on the Crystallographic Evolution, Microstructure, Mechanical and Corrosion Properties of Porous Ti4Al4Co Alloy. Metals and Materials International 28:6, pages 1455-1470.
Crossref
Crossref
Güzide Meltem LÜLE ŞENÖZ & Rabia ÇINAR DAŞKESEN. (2022) PRODUCTION AND CHARACTERIZATION OF B4C REINFORCED AA7075 COMPOSITE METALLIC FOAMB4C TAKVİYELİ AA7075 KOMPOZİT METAL KÖPÜK ÜRETİMİ VE KARAKTERİZASYONU. Mühendislik Bilimleri ve Tasarım Dergisi 10:1, pages 1-6.
Crossref
Crossref
Sukyung Lee, Jason Tam, Weiwei Li, Bosco Yu, Hai Jun Cho, Javad Samei, David S. Wilkinson, Heeman Choe & Uwe Erb. (2019) Multi-scale morphological characterization of Ni foams with directional pores. Materials Characterization 158, pages 109939.
Crossref
Crossref
Michele Monno, Daniela Negri, Valerio Mussi, Pedram Aghaei, Gianpiero Groppi, Enrico Tronconi & Matteo Strano. (2018) Cost-Efficient Aluminum Open-Cell Foams: Manufacture, Characterization, and Heat Transfer Measurements. Advanced Engineering Materials 20:8, pages 1701032.
Crossref
Crossref
Mark A. Atwater, Laura N. Guevara, Kris A. Darling & Mark A. Tschopp. (2018) Solid State Porous Metal Production: A Review of the Capabilities, Characteristics, and Challenges. Advanced Engineering Materials 20:7, pages 1700766.
Crossref
Crossref
B. Soni & S. Biswas. (2016) Mass-scale processing of open-cell metallic foams by pressurized casting method. Journal of Porous Materials 24:1, pages 29-37.
Crossref
Crossref
C. Simoneau, V. Brailovski & P. Terriault. (2016) Design, manufacture and tensile properties of stochastic porous metallic structures. Mechanics of Materials 94, pages 26-37.
Crossref
Crossref
Hyungyung Jo, Min Jeong Kim, Hyelim Choi, Yung-Eun Sung, Heeman Choe & David C. Dunand. (2016) Morphological Study of Directionally Freeze-Cast Nickel Foams. Metallurgical and Materials Transactions E 3:1, pages 46-54.
Crossref
Crossref
V. Brailovski & P. Terriault. 2016. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Luc Salvo, Guilhem Martin, Mathieu Suard, Ariane Marmottant, Rémy Dendievel & Jean-Jacques Blandin. (2014) Processing and structures of solids foams. Comptes Rendus Physique 15:8-9, pages 662-673.
Crossref
Crossref
A. Etiemble, J. Adrien, E. Maire, H. Idrissi, D. Reyter & L. Roué. (2014) 3D morphological analysis of copper foams as current collectors for Li-ion batteries by means of X-ray tomography. Materials Science and Engineering: B 187, pages 1-8.
Crossref
Crossref
Driss Mazouzi, David Reyter, Magali Gauthier, Philippe Moreau, Dominique Guyomard, Lionel Roué & Bernard Lestriez. (2014) Very High Surface Capacity Observed Using Si Negative Electrodes Embedded in Copper Foam as 3D Current Collectors. Advanced Energy Materials 4:8, pages 1301718.
Crossref
Crossref
Jalal Kahani Khabushan, Soheila Bazzaz Bonabi, Fatemeh Moghaddasi Aghbagh & Amin Kahani Khabushan. (2014) A study of fabricating and compressive properties of cellular Al–Si (355.0) foam using TiH2. Materials & Design 55, pages 792-797.
Crossref
Crossref
Arash Ardekhani & Ramin Raiszadeh. (2011) Removal of Double Oxide Film Defects by Ceramic Foam Filters. Journal of Materials Engineering and Performance 21:7, pages 1352-1362.
Crossref
Crossref
O R Tutunea-Fatan, M A Fakhri & E V Bordatchev. (2011) Porosity and cutting forces: from macroscale to microscale machining correlations. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225:5, pages 619-630.
Crossref
Crossref
Bin Na Song, Guang Chun Yao, Guo Yin Zu, Lei Wang & Hua Ding. (2010) Preparing Aluminum Foam Sandwich Panels by the Pack-Rolling-Powder Metallurgy Foaming Technique. Advanced Materials Research 154-155, pages 613-616.
Crossref
Crossref
M. Barletta, A. Gisario, S. Guarino & G. Rubino. (2009) Production of Open Cell Aluminum Foams by Using the Dissolution and Sintering Process (DSP). Journal of Manufacturing Science and Engineering 131:4.
Crossref
Crossref
Kendra A. Erk, David C. Dunand & Kenneth R. Shull. (2008) Titanium with controllable pore fractions by thermoreversible gelcasting of TiH2. Acta Materialia 56:18, pages 5147-5157.
Crossref
Crossref
Eric Baril, Louis-Philippe Lefebvre, Yannig Thomas & Florin Ilinca. (2008) Foam-coated MIM gives new edge to titanium implants. Metal Powder Report 63:8, pages 46-55.
Crossref
Crossref
Mamoun Medraj, Eric Baril, Virendra Loya & Louis-Philippe Lefebvre. (2007) The effect of microstructure on the permeability of metallic foams. Journal of Materials Science 42:12, pages 4372-4383.
Crossref
Crossref
Linsea Paradis, Daudi Waryoba, Kyle Robertson, Arnaud Ndayishimiye, Zhongming Fan, Ramakrishnan Rajagopalan & Clive A. Randall. (2022) Densification and Strengthening of Ferrous Based Powder Compacts Through Cold Sintering Aided Warm Compaction. SSRN Electronic Journal.
Crossref
Crossref