Citations (25)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
K. Mishra, B. R. Sarkar & B. Bhattacharyya. (2019) Influence of inner-spraying rotating tool during electrochemical milling of Nimonic-263 alloy. Materials and Manufacturing Processes 34:7, pages 807-813.
Read now
Read now
Md. Zishanur Rahman, Alok Kumar Das & Somnath Chattopadhyaya. (2018) Microhole drilling through electrochemical processes: A review. Materials and Manufacturing Processes 33:13, pages 1379-1405.
Read now
Read now
Piyushkumar B. Tailor, Amit Agrawal & Suhas S. Joshi. (2015) Parametric Understanding of Electro-Chemical Buffing (ECB) Using Current-Voltage Characterization. Machining Science and Technology 19:3, pages 440-459.
Read now
Read now
Lin Tang & Yong-Feng Guo. (2013) Experimental Study of Special Purpose Stainless Steel on Electrochemical Machining of Electrolyte Composition. Materials and Manufacturing Processes 28:4, pages 457-462.
Read now
Read now
Dar-Yuan Chang, Ping-Chen Shen, Jung-Chou Hung, Shuo-Jen Lee & Hai-Ping Tsui. (2011) Process Simulation–Assisted Fabricating Micro-Herringbone Grooves for a Hydrodynamic Bearing in Electrochemical Micromachining. Materials and Manufacturing Processes 26:12, pages 1451-1458.
Read now
Read now
Articles from other publishers (20)
Aruna Thakur, Mukesh Tak & Rakesh G. Mote. (2022) Suitability of electrolytes and anodic dissolution behavior of 17-4 PH stainless steel. Materials Today: Proceedings 50, pages 2528-2535.
Crossref
Crossref
Alexander Schupp, Oliver Beyss, Bob Rommes, Andreas Klink & Daniela Zander. (2021) Insights on the Influence of Surface Chemistry and Rim Zone Microstructure of 42CrMo4 on the Efficiency of ECM. Materials 14:9, pages 2132.
Crossref
Crossref
Daniela Zander, Alexander Schupp, Oliver Beyss, Bob Rommes & Andreas Klink. (2021) Oxide Formation during Transpassive Material Removal of Martensitic 42CrMo4 Steel by Electrochemical Machining. Materials 14:2, pages 402.
Crossref
Crossref
T. Geethapriyan, T. Muthuramalingam & K. Kalaichelvan. (2019) Influence of Process Parameters on Machinability of Inconel 718 by Electrochemical Micromachining Process using TOPSIS Technique. Arabian Journal for Science and Engineering 44:9, pages 7945-7955.
Crossref
Crossref
Kangnan Fan, Zhuji Jin, Jiang Guo, Zebei Wang & Guannan Jiang. (2019) Investigation on the surface layer formed during electrochemical modification of pure iron. Applied Surface Science 466, pages 466-471.
Crossref
Crossref
Hasan Demirtas, Oguzhan Yilmaz & Bahattin Kanber. (2018) Controlling short circuiting, oxide layer and cavitation problems in electrochemical machining of freeform surfaces. Journal of Materials Processing Technology 262, pages 585-596.
Crossref
Crossref
N. Schubert, M. Schneider, A. Michaelis, M. Manko & M. M. Lohrengel. (2017) Electrochemical machining of tungsten carbide. Journal of Solid State Electrochemistry 22:3, pages 859-868.
Crossref
Crossref
Sherif Araby, Roubi Zaied, Salah Haridy & Saleh Kaytbay. (2016) Grooves into cylindrical shapes by wire electrochemical machining. The International Journal of Advanced Manufacturing Technology 90:1-4, pages 445-455.
Crossref
Crossref
Michael Schneider & Manuel Lohrengel. 2017. Springer Handbook of Electrochemical Energy. Springer Handbook of Electrochemical Energy
941
971
.
Piyushkumar B. Tailor, Amit Agrawal & Suhas S. Joshi. (2016) Numerical Simulation and Experimentation on Electrochemical Buffing. Journal of Manufacturing Science and Engineering 138:6.
Crossref
Crossref
Weichen Xu, Steven R. Street, Mahrez Amri, J. Frederick W. Mosselmans, Paul D. Quinn, Trevor Rayment & Alison J. Davenport. (2015) In-situ Synchrotron Studies of the Effect of Nitrate on Iron Artificial Pits in Chloride Solutions. Journal of The Electrochemical Society 162:6, pages C238-C242.
Crossref
Crossref
L. Tang & W. M. Gan. (2014) Experiment and simulation study on concentrated magnetic field-assisted ECM S-03 special stainless steel complex cavity. The International Journal of Advanced Manufacturing Technology 72:5-8, pages 685-692.
Crossref
Crossref
Lin Tang, Bo Li, Sen Yang, Qiuli Duan & Baoyin Kang. (2014) The effect of electrolyte current density on the electrochemical machining S-03 material. The International Journal of Advanced Manufacturing Technology 71:9-12, pages 1825-1833.
Crossref
Crossref
Manuel Lohrengel. 2014. Encyclopedia of Applied Electrochemistry. Encyclopedia of Applied Electrochemistry
1748
1753
.
L. B. Abhang & M. Hameedullah. (2012) Determination of optimum parameters for multi-performance characteristics in turning by using grey relational analysis. The International Journal of Advanced Manufacturing Technology 63:1-4, pages 13-24.
Crossref
Crossref
M. Burger, L. Koll, E.A. Werner & A. Platz. (2012) Electrochemical machining characteristics and resulting surface quality of the nickel-base single-crystalline material LEK94. Journal of Manufacturing Processes 14:1, pages 62-70.
Crossref
Crossref
H. L. Zhang, N. S. Ong & Y. C. Lam. (2007) Mold surface roughness effects on cavity filling of polymer melt in micro injection molding. The International Journal of Advanced Manufacturing Technology 37:11-12, pages 1105-1112.
Crossref
Crossref
Koji FUSHIMI, Masatoshi SAKAIRI & Hiroki HABAZAKI. (2008) Evaluation of Materials Surface Using Capillary Micro-cell Technique. Journal of the Surface Finishing Society of Japan Journal of The Surface Finishing Society of Japan 59:12, pages 863-863.
Crossref
Crossref
A. Schreiber, C. Rosenkranz & M.M. Lohrengel. (2007) Grain-dependent anodic dissolution of iron. Electrochimica Acta 52:27, pages 7738-7745.
Crossref
Crossref
B. Walther, J. Schilm, A. Michaelis & M.M. Lohrengel. (2007) Electrochemical dissolution of hard metal alloys. Electrochimica Acta 52:27, pages 7732-7737.
Crossref
Crossref