Citations (49)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
Anup Kumar Maurya, Chandan Pandey & Rahul Chhibber. (2023) Influence of heat input on weld integrity of weldments of two dissimilar steels. Materials and Manufacturing Processes 38:4, pages 379-400.
Read now
Read now
Dipali Pandya, Amarish Badgujar & Nilesh Ghetiya. (2021) A novel perception toward welding of stainless steel by activated TIG welding: a review. Materials and Manufacturing Processes 36:8, pages 877-903.
Read now
Read now
R. Sokkalingam, P. Mastanaiah, V. Muthupandi, K. Sivaprasad & K. G. Prashanth. (2020) Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties. Materials and Manufacturing Processes 35:16, pages 1885-1894.
Read now
Read now
Pratishtha Sharma & Dheerendra Kumar Dwivedi. (2019) Comparative study of activated flux-GTAW and multipass-GTAW dissimilar P92 steel-304H ASS joints. Materials and Manufacturing Processes 34:11, pages 1195-1204.
Read now
Read now
Ankush Choudhary, Manoj Kumar & Deepak Rajendra Unune. (2018) Investigating effects of resistance wire heating on AISI 1023 weldment characteristics during ASAW. Materials and Manufacturing Processes 33:7, pages 759-769.
Read now
Read now
A. G. Kamble & R. Venkata Rao. (2016) Effects of process parameters and thermo-mechanical simulation of gas metal arc welding process. International Journal of Modelling and Simulation 36:4, pages 170-182.
Read now
Read now
Anirban Bhattacharya & Ramesh Kumar. (2016) Dissimilar Joining Between Austenitic and Duplex Stainless Steel in Double-Shielded GMAW: A Comparative Study. Materials and Manufacturing Processes 31:3, pages 300-310.
Read now
Read now
Ramesh Kumar, Anirban Bhattacharya & Tarun Kumar Bera. (2015) Mechanical and Metallurgical Studies in Double Shielded GMAW of Dissimilar Stainless Steels. Materials and Manufacturing Processes 30:9, pages 1146-1153.
Read now
Read now
Anirban Bhattacharya, Tarun
Kumar Bera & Vinod
Kumar Suri. (2014) Influence of Heat Input in Automatic GMAW: Penetration Prediction and Microstructural Observation. Materials and Manufacturing Processes 29:10, pages 1210-1218.
Read now
Read now
K. Kumar, SatishV. Kailas & T.S. Srivatsan. (2011) The Role of Tool Design in Influencing the Mechanism for the Formation of Friction Stir Welds in Aluminum Alloy 7020. Materials and Manufacturing Processes 26:7, pages 915-921.
Read now
Read now
A.K. Lakshminarayanan & V. Balasubramanian. (2011) Comparison of Electron Beam and Friction Stir Weldments of Modified 12 wt% Ferritic Stainless Steel. Materials and Manufacturing Processes 26:6, pages 868-877.
Read now
Read now
Articles from other publishers (38)
Markush Bakhla, Shweta Shukla & Binod Kumar. (2023) Effect of electrode composition over performance of dissimilar stainless-steel welds. Materials Today: Proceedings.
Crossref
Crossref
Sinan Aydin. (2023) TIG-weldability of AISI 430 and DUROSTAT 500 grade. Materials Testing 65:6, pages 952-960.
Crossref
Crossref
Sachin Ambade, Faraz Khan, Atharva Dahikar, Yash Bhonde, Sagar Shelare, Chetan Tembhurkar & Diwesh Meshram. (2023) Dissimilar welding of austenitic SS and ferritic SS in last decades. Materials Today: Proceedings.
Crossref
Crossref
Minglu Chen, Bin Jiang, Ran Ding, Yihuan Liu, Liming Yu, Zejun Wang, Chenxi Liu & Yongchang Liu. (2023) Microstructure evolution and tensile behaviors of dissimilar TLP joint of austenitic steel and high-Cr ferritic steel. Materials Science and Engineering: A 870, pages 144818.
Crossref
Crossref
Perumandla Pavan, Mahesh Kumar Talari, Nagumothu Kishore Babu, Ateekh Ur Rehman & Prakash Srirangam. (2023) Effect of Heat Treatment on the Microstructure and Mechanical Properties of Rotary Friction Welded Dissimilar IN718 to SS304L Alloys. Applied Sciences 13:6, pages 3584.
Crossref
Crossref
Santosh K. Gupta, Awanikumar P. Patil, Ramesh C. Rathod, Vipin Tandon, Aman Gupta & Jitendra Chavhan. (2023) Influence of filler variation on microstructural evolution, mechanical and corrosion performance of Ti-stabilized 439 ferritic stainless steel. Materials Today Communications 34, pages 105010.
Crossref
Crossref
C. Rajaravi, B. Ganesh, S. Lakshmanan & B. Gobalakrishnan. (2023) Influence of TIG welding processing parameters on mechanical properties of austenitic stainless steel using Taguchi analysis. Materials Today: Proceedings 72, pages 2402-2409.
Crossref
Crossref
Markush Bakhla, Ajaykumar Udayraj Yadav, Binod Kumar & M. Sambasiva Rao. 2023. Proceedings of the 3rd International Conference on Advances in Materials Processing: Challenges and Opportunities. Proceedings of the 3rd International Conference on Advances in Materials Processing: Challenges and Opportunities
41
46
.
Qiushi Zhang, Jiaming Liu, Hongcheng Chi, Lianwei Li, Hong Zhang & Fengde Liu. (2022) Effect of beam oscillation on the mechanical properties of fiber-laser-welded thin-plate X2CrTiNb18 ferritic stainless-steel joints. Optics & Laser Technology 156, pages 108481.
Crossref
Crossref
Gaurang R. Joshi, Vishvesh J. Badheka, Raghavendra S. Darji, Ankit D. Oza, Vivek J. Pathak, Dumitru Doru Burduhos-Nergis, Diana Petronela Burduhos-Nergis, Gautam Narwade & Gopinath Thirunavukarasu. (2022) The Joining of Copper to Stainless Steel by Solid-State Welding Processes: A Review. Materials 15:20, pages 7234.
Crossref
Crossref
Santosh K. Gupta, Awanikumar P. Patil, Ramesh C. Rathod, Vipin Tandon & Himanshu Vashishtha. (2021) Investigation on Impact of Heat Input on Microstructural, Mechanical, and Intergranular Corrosion Properties of Gas Tungsten Arc-Welded Ti-Stabilized 439 Ferritic Stainless Steel. Journal of Materials Engineering and Performance 31:5, pages 4084-4097.
Crossref
Crossref
Chetan Tembhurkar, Ravinder Kataria, Sachin P. Ambade & Jagesvar Verma. 2022. Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020). Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)
505
518
.
Swagat Dwibedi & Swarup Bag. (2021) Development of Micro-plasma Arc Welding System for Different Thickness Dissimilar Austenitic Stainless Steels. Journal of The Institution of Engineers (India): Series C 102:3, pages 657-671.
Crossref
Crossref
Chetan Tembhurkar, Ravinder Kataria, Sachin Ambade, Jagesvar Verma, Anand Sharma & Saurabh Sarkar. (2021) Effect of Fillers and Autogenous Welding on Dissimilar Welded 316L Austenitic and 430 Ferritic Stainless Steels. Journal of Materials Engineering and Performance 30:2, pages 1444-1453.
Crossref
Crossref
S. Emami, S. Sadeghi-Kanani, T. Saeid & F. Khan. (2020) Dissimilar friction stir welding of AISI 430 ferritic and AISI 304L austenitic stainless steels. Archives of Civil and Mechanical Engineering 20:4.
Crossref
Crossref
Chetan A. Somani & D.I. Lalwani. (2020) Experimental study of some mechanical and metallurgical properties of TIG-MIG hybrid welded austenitic stainless steel plates. Materials Today: Proceedings 26, pages 644-648.
Crossref
Crossref
Debashis Mishra & Maneiah Dakkili. (2020) Gas tungsten and shielded metal arc welding of stainless steel 310 and 304 grades over single and double ‘V’ butt joints. Materials Today: Proceedings 27, pages 772-776.
Crossref
Crossref
Yu Zhang, Jing Guo, Yang Li, Zhen Luo & Xu Zhang. (2020) A comparative study between the mechanical and microstructural properties of resistance spot welding joints among ferritic AISI 430 and austenitic AISI 304 stainless steel. Journal of Materials Research and Technology 9:1, pages 574-583.
Crossref
Crossref
C. Wilson Dhileep Kumar, S. Saravanan & K. Raghukandan. (2019) Influence of Grooved Base Plate on Microstructure and Mechanical Strength of Aluminum–Stainless Steel Explosive Cladding. Transactions of the Indian Institute of Metals 72:12, pages 3269-3276.
Crossref
Crossref
Sachin Balbande, Ravindra V Taiwade, A P Patil & Ujjawal Pathak. (2019) Cold metal transfer welding of duplex with ferritic and super austenitic stainless steel. Materials Research Express 6:10, pages 106542.
Crossref
Crossref
Francisco-Javier Cárcel-Carrasco, Manuel Pascual-Guillamón, Lorenzo Solano García, Fidel Salas Vicente & Miguel-Angel Pérez-Puig. (2019) Pitting Corrosion in AISI 304 Rolled Stainless Steel Welding at Different Deformation Levels. Applied Sciences 9:16, pages 3265.
Crossref
Crossref
Xu Zhang, Yu Zhang, Yudong Wu, Sansan Ao & Zhen Luo. (2019) Effects of melting-mixing ratio on the interfacial microstructure and tensile properties of austenitic–ferritic stainless steel joints. Journal of Materials Research and Technology 8:3, pages 2649-2661.
Crossref
Crossref
Laécio G. Galdino, Samuel F. Rodrigues, Clodualdo AranasJr.Jr., Gedeon S. Reis & Valtair A. Ferraresi. (2018) The effect of purge gas condition on the amount of ferrite in tubular AISI 304 stainless steel during welding. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:8.
Crossref
Crossref
Lakshmanan Vellaichamy, Pradeep Benedict Thomas Gerard & Sathiya Paulraj. (2018) Mechanical and Metallurgical Characterization of Laser Welding on P91 Ferritic Steel and Incoloy 800HT Dissimilar Joints. Materials Research 21:2.
Crossref
Crossref
Anirban Bhattacharya & Sanchit Singla. (2016) Dissimilar GTAW between AISI 304 and AISI 4340 steel: Multi-response optimization by analytic hierarchy process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 231:4, pages 824-835.
Crossref
Crossref
Anirban Bhattacharya & Sanchit Singla. (2016) Mechanical Properties and Metallurgical Characterization of Dissimilar Welded Joints between AISI 316 and AISI 4340. Transactions of the Indian Institute of Metals 70:4, pages 893-901.
Crossref
Crossref
M.O.H. Amuda, E.T. Akinlabi & S. Mridha c. (2017) Influences of Energy Input and Metal Powder Addition on Carbide Precipitation in AISI 430 Ferritic Stainless Steel Welds. Materials Today: Proceedings 4:2, pages 234-243.
Crossref
Crossref
T. Mohandas. 2017. Aerospace Materials and Material Technologies. Aerospace Materials and Material Technologies
65
83
.
Anirban Bhattacharya, Tarun Kumar Bera & Vinod Kumar Suri. (2015) Effect of process parameters on toughness and metallurgical behaviour during uniaxial automatic gas metal arc welding of austenitic stainless steel AISI 316. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230:4, pages 869-878.
Crossref
Crossref
Tevfik Ertugrul Ozdemir, Hakan Cetinel & Bahadir Uyulgan. (2016) Fracture behavior of various welded steels. Materials Testing 58:2, pages 102-108.
Crossref
Crossref
R. KUMAR & M. BALASUBRAMANIAN. (2015) Application of response surface methodology to optimize process parameters in friction welding of Ti–6Al–4V and SS304L rods. Transactions of Nonferrous Metals Society of China 25:11, pages 3625-3633.
Crossref
Crossref
R. Kumar & M. Balasubramanian. (2015) Comparative Study of Ti Alloy and Stainless Steel 304L Friction Welded Joint with Different Interlayer Process Methods. Applied Mechanics and Materials 766-767, pages 739-744.
Crossref
Crossref
Sara María Aguilar-Sierra, Claudia Patricia Serna-Giraldo & Ricardo Emilio Aristizábal-Sierra. (2015) Transformaciones Microestructurales en Soldaduras Disímiles de Acero Inoxidable Austenítico con Acero Inoxidable Ferrítico. Soldagem & Inspeção 20:1, pages 59-67.
Crossref
Crossref
R. Kumar & M. Balasubramanian. (2015) Experimental investigation of Ti–6Al–4V titanium alloy and 304L stainless steel friction welded with copper interlayer. Defence Technology 11:1, pages 65-75.
Crossref
Crossref
A. R. Khalifeh, A. Dehghan & E. Hajjari. (2013) Dissimilar joining of AISI 304L/St37 steels by TIG welding process. Acta Metallurgica Sinica (English Letters) 26:6, pages 721-727.
Crossref
Crossref
A. K. Lakshminarayanan & V. Balasubramanian. (2012) Evaluation of Microstructure and Mechanical Properties of Laser Beam Welded AISI 409M Grade Ferritic Stainless Steel. Journal of Iron and Steel Research International 19:1, pages 72-78.
Crossref
Crossref
H.C. Dey, M. Ashfaq, A.K. Bhaduri & K. Prasad Rao. (2009) Joining of titanium to 304L stainless steel by friction welding. Journal of Materials Processing Technology 209:18-19, pages 5862-5870.
Crossref
Crossref
De-feng Mo, Zheng-fei Hu, Shu-juan Chen, Chun-xu Wang & Guo-qiu He. (2009) Microstructure and Hardness of T250 Maraging Steel in Heat Affected Zone. Journal of Iron and Steel Research International 16:1, pages 87-91.
Crossref
Crossref