Citations (77)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
Surendra Singh, Brijesh Patel, Rajeev Kumar Upadhyay & Nishant K. Singh. (2022) Improvement of process performance of powder mixed electrical discharge machining by optimisation -A Review. Advances in Materials and Processing Technologies 8:3, pages 3074-3104.
Read now
Read now
Wuyi Ming, Zhen Zhang, Guojun Zhang, Yu Huang, Jianwen Guo & Yuan Chen. (2014) Multi-Objective Optimization of 3D-Surface Topography of Machining YG15 in WEDM. Materials and Manufacturing Processes 29:5, pages 514-525.
Read now
Read now
Shyam
Sunder Agrawal & Vinod Yadava. (2013) Modeling and Prediction of Material Removal Rate and Surface Roughness in Surface-Electrical Discharge Diamond Grinding Process of Metal Matrix Composites. Materials and Manufacturing Processes 28:4, pages 381-389.
Read now
Read now
Ravindranadh Bobbili, V. Madhu & A.
K Gogia. (2013) Effect of Wire-EDM Machining Parameters on Surface Roughness and Material Removal Rate of High Strength Armor Steel. Materials and Manufacturing Processes 28:4, pages 364-368.
Read now
Read now
Rajarshi Mukherjee & Shankar Chakraborty. (2012) Selection of EDM Process Parameters Using Biogeography-Based Optimization Algorithm. Materials and Manufacturing Processes 27:9, pages 954-962.
Read now
Read now
Anil Kumar, Sachin Maheshwari, Chitra Sharma & Naveen Beri. (2010) Research Developments in Additives Mixed Electrical Discharge Machining (AEDM): A State of Art Review. Materials and Manufacturing Processes 25:10, pages 1166-1180.
Read now
Read now
Deepak
Kumar Panda. (2010) Modelling and Optimization of Multiple Process Attributes of Electrodischarge Machining Process by Using a New Hybrid Approach of Neuro–Grey Modeling. Materials and Manufacturing Processes 25:6, pages 450-461.
Read now
Read now
K. P. Somashekhar, N. Ramachandran & Jose Mathew. (2010) Optimization of Material Removal Rate in Micro-EDM Using Artificial Neural Network and Genetic Algorithms. Materials and Manufacturing Processes 25:6, pages 467-475.
Read now
Read now
Byungwhan Kim, Hwa
Jun Lee & Donghwan Kim. (2009) Neural Network Model of Plasma Charging Damage on MOSFET Device. Materials and Manufacturing Processes 24:6, pages 615-618.
Read now
Read now
Byungwhan Kim, Gi
Tae Kim & Hwa
Jun Lee. (2008) Ex Situ Plasma Diagnosis by Recognition of X-Ray Photoelectron Spectroscopy Data Using a Neural Network. Materials and Manufacturing Processes 23:5, pages 528-532.
Read now
Read now
DeepakK. Panda & Rajat
Kumar Bhoi. (2006) Electro-Discharge Machining–A Qualitative Approach. Materials and Manufacturing Processes 21:8, pages 853-862.
Read now
Read now
Articles from other publishers (66)
Kun Zhou, Shuai Wang, Rui Zhou & Binrui Wang. (2022) Admittance control design and system testing of industrial robot polishing operation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 237:10, pages 1538-1552.
Crossref
Crossref
Nitin Kumar Sahu, Mukesh Kumar Singh, Atul Kumar Sahu & Anoop Kumar Sahu. (2023) Employment of cylindrical electrolytic copper grade electrode under EDMed Inconel 825 super alloy: emphasis on machining behavior accompanied with surface topography for sustainability. The International Journal of Advanced Manufacturing Technology.
Crossref
Crossref
M Lakshmi & Raja Das. (2023) Performance evaluation of CNN-based crack detection for electrical discharge machined steel surfaces. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892211464.
Crossref
Crossref
Yogesh Sable & H.M. Dharmadhikari. (2023) Artificial Neural Network prediction model for MRR in WEDM of WC-Co. Materials Today: Proceedings 72, pages 1650-1656.
Crossref
Crossref
Haigang Liang & Jinwei Qiao. (2022) Analysis of Current Situation, Demand and Development Trend of Casting Grinding Technology. Micromachines 13:10, pages 1577.
Crossref
Crossref
Yanyan Chen, Xudong Guo, Guojun Zhang, Yang Cao, Dili Shen, Xiaoke Li, Shengfei Zhang & Wuyi Ming. (2022) Development of a Hybrid Intelligent Process Model for Micro-Electro Discharge Machining Using the TTM-MDS and Gaussian Process Regression. Micromachines 13:6, pages 845.
Crossref
Crossref
Ananya Upadhyay, Ved Prakash & Vinay Sharma. 2022. Research Anthology on Artificial Neural Network Applications. Research Anthology on Artificial Neural Network Applications
843
866
.
Anshuman Kumar Sahu & Siba Sankar Mahapatra. (2020) Prediction and optimization of performance measures in electrical discharge machining using rapid prototyping tool electrodes. Journal of Intelligent Manufacturing 32:8, pages 2125-2145.
Crossref
Crossref
Jambeswar Sahu & Sonam Shrivastava. (2021) Fuzzy based multi-response optimization: a case study on EDM machining process. SN Applied Sciences 3:7.
Crossref
Crossref
N. Pallavi Senapati, D.K. Panda & Rajat Kumar Bhoi. (2021) Prediction of multiple characteristics of Friction-Stir welded joints by Levenberg Marquardt algorithm based artificial neural network. Materials Today: Proceedings 41, pages 391-396.
Crossref
Crossref
D. Palanisamy, N. Manikandan, J.S. Binoj, R. Ramesh & T.D. Shankar Narayana. (2021) Performance comparison of artificial neural network and multiple regression models for wire electrical discharge machining of haste alloy. Materials Today: Proceedings 39, pages 524-532.
Crossref
Crossref
D. Palanisamy, N. Manikandan, R. Ramesh, A. Devaraju & D. ArulKirubakaran. (2021) Development of neural network models for wire electrical discharge machining of Haste alloy. Materials Today: Proceedings 39, pages 438-445.
Crossref
Crossref
S. Ganapathy, P. Balasubramanian, B. Vasanth & S. Thulasiraman. (2021) Comparative investigation of Artificial Neural Network (ANN) and Response Surface Methodology (RSM) expectation in EDM parameters. Materials Today: Proceedings 46, pages 9592-9596.
Crossref
Crossref
Oguz Erdem, Can Cogun, Ibrahim Uslan & Murat Erbas. (2020) Thermo-fluid multi-physics modeling and experimental verification of volumetric workpiece material removal by a discharge pulse in electric discharge machining process. Journal of Physics D: Applied Physics 53:39, pages 395501.
Crossref
Crossref
J. Martin Sahayaraj, R. Arravind, P. Subramanian, S. Marichamy & B. Stalin. (2020) Artificial neural network based prediction of responses on eglin steel using electrical discharge machining process. Materials Today: Proceedings 33, pages 4417-4419.
Crossref
Crossref
Dipesh Popli, Parveen Sharma & Shubham Verma. 2020. Advances in Intelligent Manufacturing. Advances in Intelligent Manufacturing
115
132
.
Umesh K. Vates, N.K. Singh, B.P. Sharma & S. Sivarao. 2019. Applied Surface Science. Applied Surface Science.
Yusliza Yusoff, Azlan Mohd Zain, Astuty Amrin, Safian Sharif, Habibollah Haron & Roselina Sallehuddin. (2017) Orthogonal based ANN and multiGA for optimization on WEDM of Ti–48Al intermetallic alloys. Artificial Intelligence Review 52:1, pages 671-706.
Crossref
Crossref
Huan Zhou, Wen-Feng Ding, Zheng Li & Hong-Hua Su. (2018) Predicting the grinding force of titanium matrix composites using the genetic algorithm optimizing back-propagation neural network model. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:4, pages 1157-1167.
Crossref
Crossref
Ramesh Rudrapati. 2019. Stainless Steels and Alloys. Stainless Steels and Alloys.
Shiba Narayan Sahu, Sagar Kumar Murmu & Narayan Chandra Nayak. (2019) Multi-objective Optimization of EDM Process with Performance Appraisal of GA based Algorithms in Neural Network Environment. Materials Today: Proceedings 18, pages 3982-3997.
Crossref
Crossref
Kalipada Maity & Himanshu Mishra. (2016) ANN modelling and Elitist teaching learning approach for multi-objective optimization of
$$\upmu $$
μ
-EDM. Journal of Intelligent Manufacturing 29:7, pages 1599-1616.
Crossref
Crossref
Yusliza Yusoff, Azlan Mohd Zain, Safian Sharif, Roselina Sallehuddin & Mohd Salihin Ngadiman. (2016) Potential ANN prediction model for multiperformances WEDM on Inconel 718. Neural Computing and Applications 30:7, pages 2113-2127.
Crossref
Crossref
G Ramanan, G Diju Samuel, S Muthu Sherin & K Samuel. (2018) Modelling and prediction of machining parameters in composite manufacturing using artificial neural network. IOP Conference Series: Materials Science and Engineering 402, pages 012163.
Crossref
Crossref
Yan Cherng Lin, Han Ming Chow, Hsin Min Lee & Jia Feng Liu. (2018) Modelling of the Parameters of EDM in Gas Based on Back Propagation Neural Network. Materials Science Forum 926, pages 11-16.
Crossref
Crossref
Ananya Upadhyay, Ved Prakash & Vinay Sharma. 2018. Design and Optimization of Mechanical Engineering Products. Design and Optimization of Mechanical Engineering Products
209
233
.
A R Jena & Raja Das. (2017) A comparison of neural network architectures for the prediction of MRR in EDM. IOP Conference Series: Materials Science and Engineering 263, pages 042151.
Crossref
Crossref
Jitendra Kumar Jaiswal & Raja Das. (2017) Application of artificial neural networks with backpropagation technique in the financial data. IOP Conference Series: Materials Science and Engineering 263, pages 042139.
Crossref
Crossref
Abhijit Dey, Mriganav Debnath & Krishna Murari Pandey. (2017) Analysis of Effect of Machining Parameters During Electrical Discharge Machining Using Taguchi-Based Multi-Objective PSO. International Journal of Computational Intelligence and Applications 16:02, pages 1750010.
Crossref
Crossref
Abbas Moghanizadeh. (2016) Reducing side overcut in EDM process by changing electrical field between tool and work piece. The International Journal of Advanced Manufacturing Technology 90:1-4, pages 1035-1042.
Crossref
Crossref
Dipankar Bhattacharyay, Duygu Kocaefe, Yasar Kocaefe & Brigitte Morais. (2015) An artificial neural network model for predicting the CO2 reactivity of carbon anodes used in the primary aluminum production. Neural Computing and Applications 28:3, pages 553-563.
Crossref
Crossref
Chinmaya P. Mohanty, Siba Sankar Mahapatra & Manas Ranjan Singh. (2014) A particle swarm approach for multi-objective optimization of electrical discharge machining process. Journal of Intelligent Manufacturing 27:6, pages 1171-1190.
Crossref
Crossref
Apurba Kumar Roy, Supriyo Roy & Kaushik Kumar. 2016. Handbook of Research on Military, Aeronautical, and Maritime Logistics and Operations. Handbook of Research on Military, Aeronautical, and Maritime Logistics and Operations
470
508
.
Khalid A. Al-Ghamdi. (2015) Modelling electrode wear in an EDM process using data transformation-based polynomial and GLM. Modelling electrode wear in an EDM process using data transformation-based polynomial and GLM.
K. A. Al-Ghamdi & E. Aspinwall. (2015) Modelling an EDM Process Using Multilayer Perceptron Network, RSM, and High-Order Polynomial. Advances in Mechanical Engineering 6:0, pages 791242-791242.
Crossref
Crossref
Khalid Al-Ghamdi & Osman Taylan. (2015) A comparative study on modelling material removal rate by ANFIS and polynomial methods in electrical discharge machining process. Computers & Industrial Engineering 79, pages 27-41.
Crossref
Crossref
Ushasta Aich & Simul Banerjee. (2014) Modeling of EDM responses by support vector machine regression with parameters selected by particle swarm optimization. Applied Mathematical Modelling 38:11-12, pages 2800-2818.
Crossref
Crossref
Raja Das & M. K. Pradhan. 2014. Advances in Secure Computing, Internet Services, and Applications. Advances in Secure Computing, Internet Services, and Applications
281
302
.
Sambhrant Srivastava, Apurba Kumar Roy & Kaushik Kumar. (2014) Design analysis of Mixed Flow Pump Impeller Blades Using ANSYS and Prediction of its Parameters using Artificial Neural Network. Procedia Engineering 97, pages 2022-2031.
Crossref
Crossref
Kumar Abhishek, Biranchi Narayan Panda, Saurav Datta & Siba Sankar Mahapatra. (2014) Comparing Predictability of Genetic Programming and ANFIS on Drilling Performance Modeling for GFRP Composites. Procedia Materials Science 6, pages 544-550.
Crossref
Crossref
Sarabjeet Singh Sidhu, Ajay Batish & Sanjeev Kumar. (2013) Neural network–based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:11, pages 1679-1692.
Crossref
Crossref
Sarabjeet Singh Sidhu, Ajay Batish & Sanjeev Kumar. (2013) Fabrication and electrical discharge machining of metal–matrix composites: A review. Journal of Reinforced Plastics and Composites 32:17, pages 1310-1320.
Crossref
Crossref
M. V. Cakir, O. Eyercioglu, K. Gov, M. Sahin & S. H. Cakir. (2015) Comparison of Soft Computing Techniques for Modelling of the EDM Performance Parameters. Advances in Mechanical Engineering 5, pages 392531.
Crossref
Crossref
P. Sreeraj, T. Kannan & Subhashis Maji. (2013) Estimation of Optimum Dilution in the GMAW Process Using Integrated ANN-GA. Journal of Engineering 2013, pages 1-17.
Crossref
Crossref
Ming Zhou, Xianyi Meng, Jianjun Qin, Zhigang Chen & Xiangjiao Lian. (2013) Building an EDM process model by an instrumental variable approach based on two interactive Kalman filters. Precision Engineering 37:1, pages 146-158.
Crossref
Crossref
Angelos P. MarkopoulosAngelos P. Markopoulos. 2013. Finite Element Method in Machining Processes. Finite Element Method in Machining Processes
71
92
.
Ushasta Aich, Amit Kumar Pal, Dipak Laha & Simul Banerjee. (2012) Searching for a Pareto Optimal Solution Set of EDM Responses Applying Multi-Objective Simulated Annealing on RSM Model. Advanced Materials Research 622-623, pages 51-55.
Crossref
Crossref
Md Ashikur Rahman Khan, M M Rahman, K Kadirgama & A R Ismail. (2012) RSM model to evaluate material removal rate in EDM of Ti-5Al-2.5Sn using graphite electrode. IOP Conference Series: Materials Science and Engineering 36, pages 012016.
Crossref
Crossref
Pushpendra S. Bharti, S. Maheshwari & C. Sharma. (2012) Multi-objective optimization of electric-discharge machining process using controlled elitist NSGA-II. Journal of Mechanical Science and Technology 26:6, pages 1875-1883.
Crossref
Crossref
SOUMYAKANT PADHEE, NIHARRANJAN NAYAK, S K PANDA, P R DHAL & S S MAHAPATRA. (2012) Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm. Sadhana 37:2, pages 223-240.
Crossref
Crossref
P. Sreeraj & T. Kannan. (2015) Modelling and Prediction of Stainless Steel Clad Bead Geometry Deposited by GMAW Using Regression and Artificial Neural Network Models. Advances in Mechanical Engineering 4, pages 237379.
Crossref
Crossref
M K Pradhan & R Das. (2011) Recurrent neural network estimation of material removal rate in electrical discharge machining of AISI D2 tool steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225:3, pages 414-421.
Crossref
Crossref
S.N. Joshi & S.S. Pande. (2011) Intelligent process modeling and optimization of die-sinking electric discharge machining. Applied Soft Computing 11:2, pages 2743-2755.
Crossref
Crossref
Zemin Fu & Jianhua Mo. (2010) Springback prediction of high-strength sheet metal under air bending forming and tool design based on GA?BPNN. The International Journal of Advanced Manufacturing Technology 53:5-8, pages 473-483.
Crossref
Crossref
Pushpendrai Singh Bharti, Sachin Maheshwari & Chitra Sharma. 2011. Soft Computing Models in Industrial and Environmental Applications, 6th International Conference SOCO 2011. Soft Computing Models in Industrial and Environmental Applications, 6th International Conference SOCO 2011
95
103
.
Mohan Kumar Pradhan & Chandan Kumar Biswas. (2010) Neuro-fuzzy and neural network-based prediction of various responses in electrical discharge machining of AISI D2 steel. The International Journal of Advanced Manufacturing Technology 50:5-8, pages 591-610.
Crossref
Crossref
S.N. Joshi & S.S. Pande. (2010) Thermo-physical modeling of die-sinking EDM process. Journal of Manufacturing Processes 12:1, pages 45-56.
Crossref
Crossref
Ming Zhou, Fuzhu Han, Xianyi Meng & Baojiang Chen. (2009) Analysis and control of electrical discharge machining (EDM) process. Analysis and control of electrical discharge machining (EDM) process.
S. N. Joshi & S. S. Pande. (2009) Development of an intelligent process model for EDM. The International Journal of Advanced Manufacturing Technology 45:3-4, pages 300-317.
Crossref
Crossref
M K Pradhan, R Das & C K Biswas. (2009) Comparisons of neural network models on surface roughness in electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223:7, pages 801-808.
Crossref
Crossref
Ming Zhou & Fuzhu Han. (2009) Adaptive control for EDM process with a self-tuning regulator. International Journal of Machine Tools and Manufacture 49:6, pages 462-469.
Crossref
Crossref
Jin Yuan, Cheng-Liang Liu, Xuemei Liu, Kesheng Wang & Tao Yu. (2009) Incorporating prior model into Gaussian processes regression for WEDM process modeling. Expert Systems with Applications 36:4, pages 8084-8092.
Crossref
Crossref
Ming Zhou, Fuzhu Han & Isago Soichiro. (2008) A time-varied predictive model for EDM process. International Journal of Machine Tools and Manufacture 48:15, pages 1668-1677.
Crossref
Crossref
Angelos P. Markopoulos, Dimitrios E. Manolakos & Nikolaos M. Vaxevanidis. (2008) Artificial neural network models for the prediction of surface roughness in electrical discharge machining. Journal of Intelligent Manufacturing 19:3, pages 283-292.
Crossref
Crossref
Jin Yuan, Kesheng Wang, Tao Yu & Minglun Fang. (2008) Reliable multi-objective optimization of high-speed WEDM process based on Gaussian process regression. International Journal of Machine Tools and Manufacture 48:1, pages 47-60.
Crossref
Crossref
Norliana Mohd Abbas, Darius G. Solomon & Md. Fuad Bahari. (2007) A review on current research trends in electrical discharge machining (EDM). International Journal of Machine Tools and Manufacture 47:7-8, pages 1214-1228.
Crossref
Crossref