Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 20, 2005 - Issue 4
Submit an article Journal homepage
291
Views
36
CrossRef citations to date
0
Altmetric
Original Articles

Performance Improvement of End Milling Using Graphite as a Solid Lubricant

N. Suresh Kumar Reddy Mechanical Engineering Department, Indian Institute of Technology Delhi, New Delhi, India
&
P. Venkateswara Rao Mechanical Engineering Department, Indian Institute of Technology Delhi, New Delhi, IndiaCorrespondence[email protected]
Pages 673-686 | Received 30 Jul 2004, Accepted 08 Oct 2004, Published online: 07 Feb 2007

Citations (36)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

Mayurkumar A. Makhesana & Kaushik M. Patel. (2022) Improvement in machining process performance using solid lubricant assisted minimum quantity lubrication. Advances in Materials and Processing Technologies 8:2, pages 2102-2127.
Read now
Emel Kuram. (2017) Nose radius and cutting speed effects during milling of AISI 304 material. Materials and Manufacturing Processes 32:2, pages 185-192.
Read now
A. Arun Premnath, T. Alwarsamy & T. Rajmohan. (2012) Experimental Investigation and Optimization of Process Parameters in Milling of Hybrid Metal Matrix Composites. Materials and Manufacturing Processes 27:10, pages 1035-1044.
Read now

Articles from other publishers (33)

Emel Kuram. (2023) Multi-objective optimization of tool nose radius and machining conditions employing Taguchi-based grey relational analysis in milling of AISI 304. Soft Computing 27:20, pages 14861-14875.
Crossref
Asiri D. T. Medagedara, Poornima Dahanayake, Herath Mudiyanselage T. G. A. Pitawala, Buddika Karunarathne, K. Kanishka H. De Silva, Masamichi Yoshimura, Kosala P. Walikannage, Thennakoon Mudiyanselage W. J. Bandara, Rajapakse Mudiyanselage G. Rajapakse & Gamaralalage R. A. Kumara. (2023) Sustainable mining of natural vein graphite via acid-extraction from waste attached to rock pieces of vein banks. Scientific Reports 13:1.
Crossref
Avinash Borgaonkar & Ismail Syed. (2023) Eco-friendly sustainable machining with MoS 2 -based solid lubricant . Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237:9, pages 1783-1795.
Crossref
Jin Xiang, Wenan Cai & Haidong Zhang. (2023) Effects of Coupling Action of Load and Temperature on the Lubricity of Coke Powder. Coatings 13:5, pages 939.
Crossref
Ge Wu, Guangxian Li, Wencheng Pan, Izamshah Raja, Xu Wang & Songlin Ding. (2022) Experimental investigation of eco-friendly cryogenic minimum quantity lubrication (CMQL) strategy in machining of Ti–6Al–4V thin-wall part. Journal of Cleaner Production 357, pages 131993.
Crossref
V. Velmurugan, G. Manimaran & K. Nimel Sworna Ross. (2021) Impact of MoS2 solid lubricant on surface integrity of Ti-6Al-4V with PVD-TiN coated tool in drilling. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:8.
Crossref
Rakesh Kumar Gunda & Suresh Kumar Reddy Narala. (2020) Analysis of electrostatic solid lubricant spray process parameters during turning Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234:11, pages 1402-1414.
Crossref
Trung-Thanh Nguyen, Mozammel Mia, Xuan-Phuong Dang, Chi-Hieu Le & Michael S Packianather. (2019) Green machining for the dry milling process of stainless steel 304. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234:5, pages 881-899.
Crossref
Sanjeev kumar, Dilbag Singh & Nirmal Singh Kalsi. (2020) Study the performance of solid lubricants during hard turning of AISI 4340 steel. Materials Today: Proceedings 24, pages 225-234.
Crossref
R. Padmini & Vivek Balakrishnan. 2020. Emerging Trends in Mechanical Engineering. Emerging Trends in Mechanical Engineering 583 591 .
R. Padmini, P. Vamsi Krishna & P. Jeevan Kumar. 2020. Advances in Applied Mechanical Engineering. Advances in Applied Mechanical Engineering 873 880 .
M. A. Makhesana & K. M. Patel. 2020. Advanced Engineering Optimization Through Intelligent Techniques. Advanced Engineering Optimization Through Intelligent Techniques 241 251 .
Mohamed Shnfir, Oluwole A. Olufayo, Walid Jomaa & Victor Songmene. (2019) Machinability Study of Hardened 1045 Steel When Milling with Ceramic Cutting Inserts. Materials 12:23, pages 3974.
Crossref
Jianing Zhu, Qunfeng Zeng, Chao Yan & Wanjun He. (2019) WS 2 Nanopowders as High-Temperature Lubricants: An Experimental and Theoretical Study . ACS Applied Nano Materials 2:9, pages 5604-5613.
Crossref
Trung-Thanh Nguyen. (2019) Prediction and optimization of machining energy, surface roughness, and production rate in SKD61 milling. Measurement 136, pages 525-544.
Crossref
Rakesh Kumar Gunda & Suresh Kumar Reddy Narala. (2017) Electrostatic high-velocity solid lubricant machining system for performance improvement of turning Ti–6Al–4V alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:1, pages 118-131.
Crossref
Mayur A. Makhesana, K. M. Patel & Anand S. Patel. 2019. Advances in Forming, Machining and Automation. Advances in Forming, Machining and Automation 229 238 .
Yunlong Jiao, Jiawei Ji, Kun Liu & Wei Wang. (2018) Effect of microtexturing on powder boundary layer: An experimental study based on laser microscopy and profilometry measurements. Lubrication Science 30:7, pages 355-363.
Crossref
Chao Wang, Wei Wang, Yong Liu & Kun Liu. (2018) Micro morphological observation and mechanism analysis of boundary layer evolution in mixed powder lubrication. Lubrication Science 30:3, pages 91-101.
Crossref
Rakesh Kumar Gunda & Suresh Kumar Reddy Narala. (2017) Evaluation of friction and wear characteristics of electrostatic solid lubricant at different sliding conditions. Surface and Coatings Technology 332, pages 341-350.
Crossref
Sachin Singh, Mukti Tyagi, Geetha Seshadri, Ajay Kumar Tyagi & Lalit Varshney. (2017) Effect of gamma radiation on graphite – PTFE dry lubrication system. Radiation Physics and Chemistry 141, pages 213-219.
Crossref
A Marques, Suresh Kumar Reddy Narala, AR Machado, Rakesh Kumar Gunda, Sravan Kumar Josyula, RB Da Silva & MB Da Silva. (2015) Performance assessment of MQSL: Minimum quantity solid lubricant during turning of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:7, pages 1144-1159.
Crossref
Jing Xu, Min Ling, Lydia Terborg, Hui Zhao, Fen Qiu, Jeffrey J. Urban, Robert Kostecki, Gao Liu & Wei Tong. (2017) Facile Synthesis and Electrochemistry of Si-Sn-C Nanocomposites for High-Energy Li-Ion Batteries. Journal of The Electrochemical Society 164:7, pages A1378-A1383.
Crossref
Bin Yang, Wei Wang, Kun Liu & Yong Liu. (2016) Observation and Analysis of Micro-Behavior Characteristics and Element Contents during Boundary Layer Evolution under Powder Particulate Lubrication. Tribology Letters 64:1.
Crossref
Yufu Xu, Jian Geng, Xiaojing Zheng, Karl D. Dearn & Xianguo Hu. (2016) Friction-Induced Transformation from Graphite Dispersed in Esterified Bio-Oil to Graphene. Tribology Letters 63:2.
Crossref
Koray Kiliçay & Mustafa Ulutan. (2016) Investigation of the solid lubrication effect of commercial boron-based compounds in end milling. International Journal of Precision Engineering and Manufacturing 17:4, pages 517-524.
Crossref
Wei Wang, Yong Liu, Guiqing Zhu & Kun Liu. (2014) Using FEM–DEM coupling method to study three-body friction behavior. Wear 318:1-2, pages 114-123.
Crossref
RR Srikant, MMS Prasad, M Amrita, AV Sitaramaraju & P Vamsi Krishna. (2013) Nanofluids as a potential solution for Minimum Quantity Lubrication: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228:1, pages 3-20.
Crossref
J. Haider & M.S.J. Hashmi. 2014. Comprehensive Materials Processing. Comprehensive Materials Processing 7 33 .
Wei Wang, Xiaojun Liu & Kun Liu. (2013) Surface observations of a powder layer during the damage process under particulate lubrication. Wear 297:1-2, pages 841-848.
Crossref
Ahmad Hamdan, Ahmed A. D. Sarhan & Mohd Hamdi. (2011) An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish. The International Journal of Advanced Manufacturing Technology 58:1-4, pages 81-91.
Crossref
P. Vamsi Krishna, R. R. Srikant, R. Padmini & Bharat Parakh. 2012. Emerging Trends in Science, Engineering and Technology. Emerging Trends in Science, Engineering and Technology 197 206 .
P Vamsi Krishna, R R Srikant & D Nageswara Rao. (2011) Solid lubricants in machining. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 225:4, pages 213-227.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.