Citations (57)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (18)
Sadegh Poozesh & Christian A. Cousin. (2022) Integrating a dynamic multiscale drying model into a closed loop control strategy for laboratory spray dryer. Drying Technology 40:11, pages 2308-2320.
Read now
Read now
T. C. Souza Pinto, A. S. Souza, J. N. M. Batista, A. M. Sarkis, L. S. Leal Filho, T. F. Pádua & R. Béttega. (2021) Characterization and drying kinetics of iron ore pellet feed and sinter feed. Drying Technology 39:10, pages 1359-1370.
Read now
Read now
Emmanuela Gavi. (2020) Application of a mechanistic model of batch fluidized bed drying at laboratory and pilot scale. Drying Technology 38:8, pages 1062-1078.
Read now
Read now
Ian C. Kemp. (2019) Application of mechanistic drying models in pharmaceuticals and other industries. Drying Technology 37:5, pages 600-611.
Read now
Read now
T. T. H. Tran, M. Jaskulski & E. Tsotsas. (2017) Reduction of a model for single droplet drying and application to CFD of skim milk spray drying. Drying Technology 35:13, pages 1571-1583.
Read now
Read now
Ian C. Kemp. (2017) Drying of pharmaceuticals in theory and practice. Drying Technology 35:8, pages 918-924.
Read now
Read now
Fábio B. Freire, Aitor Atxutegi, Flavio B. Freire, José T. Freire, Roberto Aguado & Martin Olazar. (2017) An adaptive lumped parameter cascade model for orange juice solid waste drying in spouted bed. Drying Technology 35:5, pages 577-584.
Read now
Read now
A. Chapuis, M. Precoppe, J. M. Méot, K. Sriroth & T. Tran. (2017) Pneumatic drying of cassava starch: Numerical analysis and guidelines for the design of efficient small-scale dryers. Drying Technology 35:4, pages 393-408.
Read now
Read now
I. C. Kemp, T. Hartwig, R. Herdman, P. Hamilton, A. Bisten & S. Bermingham. (2016) Spray drying with a two-fluid nozzle to produce fine particles: Atomization, scale-up, and modeling. Drying Technology 34:10, pages 1243-1252.
Read now
Read now
Xinyuan Gao, Jin Wang, Shaotie Wang & Zhanyong Li. (2016) Modeling of drying kinetics of green peas by reaction engineering approach. Drying Technology 34:4, pages 437-442.
Read now
Read now
M. A. Delele, F. Weigler & J. Mellmann. (2015) Advances in the Application of a Rotary Dryer for Drying of Agricultural Products: A Review. Drying Technology 33:5, pages 541-558.
Read now
Read now
IanC. Kemp & Quentin Sohet. (2010) Scale-Up, Optimization, and Control of Industrial Batch Fluidized Bed Dryers Using Multilevel Theoretical Models. Drying Technology 28:5, pages 710-722.
Read now
Read now
Zhen-Xiang Gong & ArunS. Mujumdar. (2008) Software for Design and Analysis of Drying Systems. Drying Technology 26:7, pages 884-894.
Read now
Read now
IanC. Kemp. (2007) Drying Software: Past, Present, and Future. Drying Technology 25:7-8, pages 1249-1263.
Read now
Read now
Wan Ramli & Wan Daud. (2007) A Cross-Flow Model for Continuous Plug Flow Fluidized-Bed Cross-Flow Dryers. Drying Technology 25:7-8, pages 1229-1235.
Read now
Read now
Ian C. Kemp. (2004) Drying in the Context of the Overall Process. Drying Technology 22:1-2, pages 377-394.
Read now
Read now
David E. Oakley. (2004) Spray Dryer Modeling in Theory and Practice. Drying Technology 22:6, pages 1371-1402.
Read now
Read now
David H. Huntington. (2004) The Influence of the Spray Drying Process on Product Properties. Drying Technology 22:6, pages 1261-1287.
Read now
Read now
Articles from other publishers (39)
Carlin Leung, Justin Adler, Nina Shapley, Timothy A.G. Langrish & Benjamin J. Glasser. (2023) Fluidized bed drying of supported Catalysts: Effect of process parameters. Chemical Engineering Science 282, pages 119280.
Crossref
Crossref
Shu Cheng & Timothy A.G. Langrish. (2023) Fluidized bed drying of chickpeas: Developing a new drying schedule to reduce protein denaturation and remove trypsin inhibitors. Journal of Food Engineering 351, pages 111515.
Crossref
Crossref
Mengke Lu, Patrick Kranz, Andrew Salmon, Sam Wilkinson & Rok Sibanc. (2022) Heat Transfer Model and Soft Sensing for Segmented Fluidized Bed Dryer. Processes 10:12, pages 2609.
Crossref
Crossref
L. Da Lio, G. Nardin & P. Canu. (2022) Manure drying optimization. Renewable Energy 196, pages 319-327.
Crossref
Crossref
Moritz Buchholz, Johannes Haus, Swantje Pietsch-Braune, Frank Kleine Jäger & Stefan Heinrich. (2022) CFD-aided population balance modeling of a spray drying process. Advanced Powder Technology 33:7, pages 103636.
Crossref
Crossref
Katarzyna Samborska, Sadegh Poozesh, Alicja Barańska, Mariia Sobulska, Aleksandra Jedlińska, Cordin Arpagaus, Narjes Malekjani & Seid Mahdi Jafari. (2022) Innovations in spray drying process for food and pharma industries. Journal of Food Engineering 321, pages 110960.
Crossref
Crossref
Kushal Sinha, Eric Murphy, Prashant Kumar, Kirsten A. Springer, Raimundo Ho & Nandkishor K. Nere. (2021) A Novel Computational Approach Coupled with Machine Learning to Predict the Extent of Agglomeration in Particulate Processes. AAPS PharmSciTech 23:1.
Crossref
Crossref
Majeedullah & Asad Shareef. 2022. Essentials of Industrial Pharmacy. Essentials of Industrial Pharmacy
1
14
.
L. Koech, H. Rutto, L. Lerotholi, R. C. Everson, H. Neomagus, D. Branken & A. Moganelwa. (2021) Spray drying absorption for desulphurization: a review of recent developments. Clean Technologies and Environmental Policy 23:6, pages 1665-1686.
Crossref
Crossref
Soeren E. Lehmann, Moritz Buchholz, Alfred Jongsma, Fredrik Innings & Stefan Heinrich. (2020) Modeling and Flowsheet Simulation of Vibrated Fluidized Bed Dryers. Processes 9:1, pages 52.
Crossref
Crossref
Soeren E. Lehmann, Tobias Oesau, Alfred Jongsma, Fredrik Innings & Stefan Heinrich. (2020) Material specific drying kinetics in fluidized bed drying under mechanical vibration using the reaction engineering approach. Advanced Powder Technology 31:12, pages 4699-4713.
Crossref
Crossref
Eline Boel, Robin Koekoekx, Sien Dedroog, Iurii Babkin, Maria Rosaria Vetrano, Christian Clasen & Guy Van den Mooter. (2020) Unraveling Particle Formation: From Single Droplet Drying to Spray Drying and Electrospraying. Pharmaceutics 12:7, pages 625.
Crossref
Crossref
Hasan Jubaer, Sepideh Afshar, Serge Mejean, Romain Jeantet, Jie Xiao, Xiao Dong Chen, Cordelia Selomulya & Meng Wai Woo. (2020) Computationally inexpensive simulation of agglomeration in spray drying while preserving structure related information using CFD. Powder Technology 372, pages 372-393.
Crossref
Crossref
Hao Chen, Emily Diep, Timothy A. G. Langrish & Benjamin J. Glasser. (2020) Continuous fluidized bed drying: Residence time distribution characterization and effluent moisture content prediction. AIChE Journal 66:5.
Crossref
Crossref
Ian C. Kemp, Alex van Millingen & Houda Khaled. (2020) Development and verification of a novel design space and improved scale-up procedure for fluid bed granulation using a mechanistic model. Powder Technology 361, pages 1021-1037.
Crossref
Crossref
Hasan Jubaer, Jie Xiao, Xiao Dong Chen, Cordelia Selomulya & Meng Wai Woo. (2019) Identification of regions in a spray dryer susceptible to forced agglomeration by CFD simulations. Powder Technology 346, pages 23-37.
Crossref
Crossref
Hao Chen, Subham Rustagi, Emily Diep, Timothy A.G. Langrish & Benjamin J. Glasser. (2018) Scale-up of fluidized bed drying: Impact of process and design parameters. Powder Technology 339, pages 8-16.
Crossref
Crossref
Narjes Malekjani & Seid Mahdi Jafari. (2018) Simulation of food drying processes by Computational Fluid Dynamics (CFD); recent advances and approaches. Trends in Food Science & Technology 78, pages 206-223.
Crossref
Crossref
Simeone Zomer, Jun Zhang, Sameer Talwar, Sayantan Chattoraj & Christopher Hewitt. (2018) Multivariate monitoring for the industrialisation of a continuous wet granulation tableting process. International Journal of Pharmaceutics 547:1-2, pages 506-519.
Crossref
Crossref
Sepideh Afshar & Madoc Sheehan. (2018) CFD and infrared thermography of particle curtains undergoing convection heat transfer: Image analysis and edge prediction. Powder Technology 325, pages 167-179.
Crossref
Crossref
Z. Abdullah, F.S. Taip, M.K. Siti Mazlina & R.Z. Abdul Rahman. (2017) Fundamental and empirical modelling of co-current spray drying process – a review. Acta Horticulturae:1152, pages 219-228.
Crossref
Crossref
Víctor Francia, Luis Martín, Andrew E. Bayly & Mark J.H. Simmons. (2016) Agglomeration in counter-current spray drying towers. Part A: Particle growth and the effect of nozzle height. Powder Technology 301, pages 1330-1343.
Crossref
Crossref
Víctor Francia, Luis Martín, Andrew E. Bayly & Mark J.H. Simmons. (2016) Agglomeration in counter-current spray drying towers. Part B: Interaction between multiple spraying levels. Powder Technology 301, pages 1344-1358.
Crossref
Crossref
Víctor Francia, Luis Martín, Andrew E. Bayly & Mark J.H. Simmons. (2016) Use of sonic anemometry for the study of confined swirling flows in large industrial units. Flow Measurement and Instrumentation 50, pages 216-228.
Crossref
Crossref
Victor Francia, Luis Martin, Andrew E. Bayly & Mark J.H. Simmons. (2015) Influence of wall friction on flow regimes and scale-up of counter-current swirl spray dryers. Chemical Engineering Science 134, pages 399-413.
Crossref
Crossref
Mark Pinto, Ian Kemp, Sean Bermingham, Thoralf Hartwig & Ariane Bisten. (2014) Development of an axisymmetric population balance model for spray drying and validation against experimental data and CFD simulations. Chemical Engineering Research and Design 92:4, pages 619-634.
Crossref
Crossref
Ian C. Kemp. 2014. Modern Drying Technology. Modern Drying Technology
261
305
.
Melissa Birch & Ivan Marziano. (2013) Understanding and Avoidance of Agglomeration During Drying Processes: A Case Study. Organic Process Research & Development 17:10, pages 1359-1366.
Crossref
Crossref
Meng Wai Woo, David Stokie, Wei Lit Choo & Sankar Bhattacharya. (2013) Master curve behaviour in superheated steam drying of small porous particles. Applied Thermal Engineering 52:2, pages 460-467.
Crossref
Crossref
I. C. Kemp. (2011) Drying Models, Myths, and Misconceptions. Chemical Engineering & Technology 34:7, pages 1057-1066.
Crossref
Crossref
Evaldo M. Silva, Jozinete S. da Silva, Rosinelson S. Pena & Hervé Rogez. (2011) A combined approach to optimize the drying process of flavonoid-rich leaves (Inga edulis) using experimental design and mathematical modelling. Food and Bioproducts Processing 89:1, pages 39-46.
Crossref
Crossref
Alessandro Gianfrancesco, Christelle Turchiuli, Denis Flick & Elisabeth Dumoulin. (2010) CFD Modeling and Simulation of Maltodextrin Solutions Spray Drying to Control Stickiness. Food and Bioprocess Technology 3:6, pages 946-955.
Crossref
Crossref
Maciej Starzak & Mohamed Mathlouthi. (2010) Formation of amorphous sugar in the syrup film – a key factor in modelling of industrial sugar drying. Food Chemistry 122:2, pages 394-409.
Crossref
Crossref
Jonathan D. Griffith, Andrew E. Bayly & Michael L. Johns. (2008) Magnetic resonance studies of detergent drop drying. Chemical Engineering Science 63:13, pages 3449-3456.
Crossref
Crossref
Wan Ramli Wan Daud. (2008) Fluidized Bed Dryers — Recent Advances. Advanced Powder Technology 19:5, pages 403-418.
Crossref
Crossref
Ian C. Kemp. 2007. Modern Drying Technology. Modern Drying Technology
261
305
.
J. M. Peralta & M. E. Schmalko. (2007) Modeling heat and mass transfer in the heat treatment step of yerba maté processing. Brazilian Journal of Chemical Engineering 24:1, pages 71-82.
Crossref
Crossref
C.G.J. Baker, A.R. Khan, Y.I. Ali & K. Damyar. (2006) Simulation of plug flow fluidized bed dryers. Chemical Engineering and Processing: Process Intensification 45:8, pages 641-651.
Crossref
Crossref
Martin Kohout, Alan P. Collier & Frantisek Stepanek. 2004. European Symposium on Computer-Aided Process Engineering-14, 37th European Symposium of the Working Party on Computer-Aided Process Engineering. European Symposium on Computer-Aided Process Engineering-14, 37th European Symposium of the Working Party on Computer-Aided Process Engineering
1075
1080
.