Citations (44)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (19)
Razieh Salamat, Holger Scaar, Fabian Weigler, Werner Berg & Jochen Mellmann. (2022) Drying of biogas digestate: A review with a focus on available drying techniques, drying kinetics, and gaseous emission behavior. Drying Technology 40:1, pages 5-29.
Read now
Read now
Xinzhu Mou & Zhenqian Chen. (2021) Experimental study on the effect of sludge thickness on the characteristics of ultrasound-assisted hot air convective drying municipal sewage sludge. Drying Technology 39:6, pages 752-764.
Read now
Read now
Sabyasachi Mondal, Suvankar Dutta, Puja Agarwala, Vishvas Nimbalkar & Sunil S. Dhumal. (2020) Intensification of cellulosic fiber drying through fundamental insights and process modeling. Drying Technology 38:16, pages 2151-2161.
Read now
Read now
Navneet Kumar & Jaywant H. Arakeri. (2020) Investigation on the effect of temperature on evaporative characteristic length of a porous medium. Drying Technology 38:9, pages 1194-1206.
Read now
Read now
Yuhui Wei, Jiale Hua & Xuemei Ding. (2017) A mathematical model for simulating heat and moisture transfer within porous cotton fabric drying inside the domestic air-vented drum dryer. The Journal of The Textile Institute 108:6, pages 1074-1084.
Read now
Read now
Juan Carlos Jarque, Carmen Segarra, Vicente Cantavella & Rosa Mondragón. (2016) Non-isothermal modeling of drying kinetics of ceramic tiles. Drying Technology 34:7, pages 761-772.
Read now
Read now
A.J. J. van der Zanden & A. Taher. (2014) A Gravitational Procedure to Measure the Diffusion Coefficient of Water in Porous Materials: A Case Study on Concrete. Drying Technology 32:6, pages 708-712.
Read now
Read now
Hong-Wei Xiao, Chung-Lim Law, Da-Wen Sun & Zhen-Jiang Gao. (2014) Color Change Kinetics of American Ginseng (Panax quinquefolium) Slices During Air Impingement Drying. Drying Technology 32:4, pages 418-427.
Read now
Read now
Hiromichi Shibata & Yumiko Hirohashi. (2013) Effect of Segment Scale in a Pore Network of Porous Materials on Drying Periods. Drying Technology 31:7, pages 743-751.
Read now
Read now
A.J. J. van der Zanden & M.H. de Wit. (2012) A Procedure to Measure the Diffusion Coefficient of Water in Brick as a Function of the Water Concentration. Drying Technology 30:5, pages 526-534.
Read now
Read now
Ahmet Cay, Işık Tarakçıoğlu & Arif Hepbasli. (2010) Exergetic Analysis of Textile Convective Drying with Stenters by Subsystem Models: Part 2—Parametric Study on Exergy Analysis. Drying Technology 28:12, pages 1368-1376.
Read now
Read now
Tamotsu Inoue, Hiroyuki Iyota & Nobuya Nishimura. (2010) Prediction Method for Drying Time of Wet Porous Material in Humid Hot Air and Superheated Steam. Drying Technology 28:5, pages 608-614.
Read now
Read now
Hiromichi Shibata & Yumiko Hirohashi. (2008) Mechanism of the First Falling Rate Period: An Alternative Approach by Image Analysis. Drying Technology 26:6, pages 675-684.
Read now
Read now
Gábor Bihercz & János Beke. (2006) Semi-Empirical Model of Convective Drying with Wide Range Layer Depth Validity. Drying Technology 24:9, pages 1165-1172.
Read now
Read now
K. Kota & T. A. G. Langrish. (2006) Fluxes and Patterns of Wall Deposits for Skim Milk in a Pilot-Scale Spray Dryer. Drying Technology 24:8, pages 993-1001.
Read now
Read now
Luiza
Helena C. D. Sousa, Oswaldo.C. Motta Lima & NehemiasC. Pereira. (2006) Analysis of Drying Kinetics and Moisture Distribution in Convective Textile Fabric Drying. Drying Technology 24:4, pages 485-497.
Read now
Read now
L. A. Calçada, M. C. Mancini & G. R. S. Wildhagen. (2006) Drying of Inorganic Particulate Compounds. Drying Technology 24:3, pages 349-358.
Read now
Read now
Somkiat Prachayawarakorn, Narongsak Kaewnin, Adisak Nathakaranakule & Somchart Soponronnarit. (2006) Effects of Peeled and Unpeeled Garlic Cloves on the Changes of Drying Rate and Quality. Drying Technology 24:1, pages 65-75.
Read now
Read now
JaakkoJ. Saastamoinen. (2005) Comparison of Moving Bed Dryers of Solids Operating in Parallel and Counterflow Modes. Drying Technology 23:5, pages 1003-1025.
Read now
Read now
Articles from other publishers (25)
Dong Liu, Qiang Wang, Anjie Hu, Zhenyu Wang, Qing Zhang & Ling Wang. (2023) Optimized model of sludge drying characteristics based on an experimental study of thickness, temperature, and humidity. Journal of Cleaner Production 429, pages 139540.
Crossref
Crossref
Michael Huylo, Kaiwu Huang, Aaron Noble, Roe-Hoan Yoon & Rui Qiao. (2023) Solvent recovery from solvent-fine coal slurries by filtration and steam stripping. Frontiers in Thermal Engineering 3.
Crossref
Crossref
M. B. Kenanoğlu & N. K. Toker. (2023) Microstructure-based estimation of unsaturated shear strength from simple evaporation test. Bulletin of Engineering Geology and the Environment 82:8.
Crossref
Crossref
Lyes Bennamoun & Macmanus Chinenye Ndukwu. (2021) Modeling and simulation of drying kinetics/curves: application to building materials. Journal of Building Pathology and Rehabilitation 7:1.
Crossref
Crossref
Marcos P. Felizardo, Giovanni R.F. Merlo & Gustavo D. Maia. (2021) Modeling drying kinetics of Jacaranda mimosifolia seeds with variable effective diffusivity via diffusion model. Biosystems Engineering 205, pages 234-245.
Crossref
Crossref
Zahra Allahdad, Motahareh Nasiri, Mehdi Varidi & Mohammad Javad Varidi. (2019) Effect of sonication on osmotic dehydration and subsequent air-drying of pomegranate arils. Journal of Food Engineering 244, pages 202-211.
Crossref
Crossref
Lyes Bennamoun. 2019. Optimization of Design for Better Structural Capacity. Optimization of Design for Better Structural Capacity
1
23
.
Yongjie Xue, Chen Wang, Zhenhua Hu, Yi Zhou, Gang Liu, Haobo Hou, Yue Xiao, Teng Wang & Jinping Li. (2018) Thermal treatment on sewage sludge by electromagnetic induction heating: Methodology and drying characterization. Waste Management 78, pages 917-928.
Crossref
Crossref
Mustafa Kemalettin Büyükakın, Semiha Öztuna & Hakan Demir. (2017) Design and thermodynamic analysis of a solar-assisted cini ceramic drying system. Renewable Energy 111, pages 147-156.
Crossref
Crossref
Y. W. Huang & M. Q. Chen. (2017) Thin-layer isothermal drying kinetics of municipal sewage sludge based on two falling rate stages during hot-air-forced convection. Journal of Thermal Analysis and Calorimetry 129:1, pages 567-575.
Crossref
Crossref
G.Y. Sun, M.Q. Chen & Y.W. Huang. (2017) Evaluation on the air-borne ultrasound-assisted hot air convection thin-layer drying performance of municipal sewage sludge. Ultrasonics Sonochemistry 34, pages 588-599.
Crossref
Crossref
Panagiotis M. Angelopoulos, Efthymios Balomenos & Maria Taxiarchou. (2016) Thin-Layer Modeling and Determination of Effective Moisture Diffusivity and Activation Energy for Drying of Red Mud from Filter Presses. Journal of Sustainable Metallurgy 2:4, pages 344-352.
Crossref
Crossref
X.Y. Zhang, M.Q. Chen, Y.W. Huang & F. Xue. (2016) Isothermal hot air drying behavior of municipal sewage sludge briquettes coupled with lignite additive. Fuel 171, pages 108-115.
Crossref
Crossref
X. Y. Zhang & M. Q. Chen. (2015) A comparison of isothermal with nonisothermal drying kinetics of municipal sewage sludge. Journal of Thermal Analysis and Calorimetry 123:1, pages 665-673.
Crossref
Crossref
B.A. Fu & M.Q. Chen. (2015) Thin-layer drying kinetics of lignite during hot air forced convection. Chemical Engineering Research and Design 102, pages 416-428.
Crossref
Crossref
Steffen Merz, Andreas Pohlmeier, Jan Vanderborght, Dagmar van Dusschoten & Harry Vereecken. (2014) Moisture profiles of the upper soil layer during evaporation monitored by NMR. Water Resources Research 50:6, pages 5184-5195.
Crossref
Crossref
M. Aminzadeh & D. Or. (2013) Temperature dynamics during nonisothermal evaporation from drying porous surfaces. Water Resources Research 49:11, pages 7339-7349.
Crossref
Crossref
Leila Remache & Nacerddine Djermane. (2013) Material Behavior of Porous Media. Advanced Materials Research 816-817, pages 42-46.
Crossref
Crossref
Curtis Larimer, Nicole Ostrowski, Jacquelyn Speakman & Ian Nettleship. (2010) The segregation of silver nanoparticles in low-cost ceramic water filters. Materials Characterization 61:4, pages 408-412.
Crossref
Crossref
Kamlesh C. Patel & Xiao Dong Chen. (2008) Surface-center temperature differences within milk droplets during convective drying and drying-based Biot number analysis. AIChE Journal 54:12, pages 3273-3290.
Crossref
Crossref
L. Derdour & H. Desmorieux. (2008) An analytical model for internal moisture content during the decreasing drying rate period. AIChE Journal 54:2, pages 475-486.
Crossref
Crossref
Gábor Bihercz, János Beke & Zoltan Kurják. (2007) Simulation of drying process of corn kernels during microwave and convective treatment. Asia-Pacific Journal of Chemical Engineering 2:2, pages 75-82.
Crossref
Crossref
R.J. Goldstein, W.E. Ibele, S.V. Patankar, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F.A. Kulacki, U. Kortshagen, S. Garrick & V. Srinivasan. (2006) Heat transfer—A review of 2003 literature. International Journal of Heat and Mass Transfer 49:3-4, pages 451-534.
Crossref
Crossref
Sunkyu Park, Richard A. Venditti, Hasan Jameel & Joel J. Pawlak. (2005) Hard to remove water in cellulose fibers characterized by high resolution thermogravimetric analysis - methods development. Cellulose 13:1, pages 23-30.
Crossref
Crossref
Hiromichi Shibata. (2005) Study for the Standardization of the Drying Curves of Capillary-Porous Media. Industrial & Engineering Chemistry Research 44:17, pages 6865-6873.
Crossref
Crossref