Daniel Walczyk, Jiachen Yang & Jennifer Gilbert Jenkins. (2023) Bast Fiber Decortication for Biocomposites by a Mastication Process. Journal of Manufacturing Science and Engineering 145:11.
Crossref

Sodagudi Francis XavierS.F. Xavier. 2022. Thermoplastic Polymer Composites. Thermoplastic Polymer Composites 185 367 .

Alessia Melelli, Frédéric Jamme, Johnny Beaugrand & Alain Bourmaud. (2022) Evolution of the ultrastructure and polysaccharide composition of flax fibres over time: When history meets science. Carbohydrate Polymers 291, pages 119584.
Crossref

Emmanuelle Richely, Alain Bourmaud, Vincent Placet, Sofiane Guessasma & Johnny Beaugrand. (2022) A critical review of the ultrastructure, mechanics and modelling of flax fibres and their defects. Progress in Materials Science 124, pages 100851.
Crossref

Albert Hernandez-Estrada, Jörg Müssig & Mark Hughes. (2022) The impact of fibre processing on the mechanical properties of epoxy matrix composites and wood-based particleboard reinforced with hemp (Cannabis sativa L.) fibre. Journal of Materials Science 57:3, pages 1738-1754.
Crossref

Alessia Melelli, Sylvie Durand, Olivier Arnould, Emmanuelle Richely, Sofiane Guessasma, Frédéric Jamme, Johnny Beaugrand & Alain Bourmaud. (2021) Extensive investigation of the ultrastructure of kink-bands in flax fibres. Industrial Crops and Products 164, pages 113368.
Crossref

Rontgen B. Gapusan, Christian Laurence E. Aquino, Luigi A. Dahonog, Bethel Faith Y. Rezaga & Mary Donnabelle L. Balela. 2021. Handbook of Polymer Nanocomposites for Industrial Applications. Handbook of Polymer Nanocomposites for Industrial Applications 251 293 .

Christophe Baley, Moussa Gomina, Joel Breard, Alain Bourmaud, Sylvain Drapier, Manuela Ferreira, Antoine Le Duigou, Pierre Jacques Liotier, Pierre Ouagne, Damien Soulat & Peter Davies. (2018) Specific features of flax fibres used to manufacture composite materials. International Journal of Material Forming 12:6, pages 1023-1052.
Crossref

Shabbir Ahmed & Chad Ulven. (2018) Dynamic In-Situ Observation on the Failure Mechanism of Flax Fiber through Scanning Electron Microscopy. Fibers 6:1, pages 17.
Crossref

L. Sisti, G. Totaro, M. Vannini & A. Celli. 2018. Lignocellulosic Composite Materials. Lignocellulosic Composite Materials 97 135 .

Mohamed Habibi, Gilbert Lebrun & Luc Laperrière. (2017) Experimental characterization of short flax fiber mat composites: tensile and flexural properties and damage analysis using acoustic emission. Journal of Materials Science 52:11, pages 6567-6580.
Crossref

Fabrizio Sarasini, Jacopo Tirillò, Debora Puglia, Franco Dominici, Carlo Santulli, Kristom Boimau, Teodoro Valente & Luigi Torre. (2017) Biodegradable polycaprolactone-based composites reinforced with ramie and borassus fibres. Composite Structures 167, pages 20-29.
Crossref

R. Castellani, E. Di Giuseppe, J. Beaugrand, S. Dobosz, F. Berzin, B. Vergnes & T. Budtova. (2016) Lignocellulosic fiber breakage in a molten polymer. Part 1. Qualitative analysis using rheo-optical observations. Composites Part A: Applied Science and Manufacturing 91, pages 229-237.
Crossref

Moshibudi C. Khoathane, Emmanuel R. Sadiku & Chinenyeze S. Agwuncha. 2015. Surface Modification of Biopolymers. Surface Modification of Biopolymers 370 400 .

Christophe Baley, Antoine Le Duigou, Alain Bourmaud, Peter Davies, Michel Nardin & Claudine Morvan. 2014. Bio-Based Composites for High-Performance Materials. Bio-Based Composites for High-Performance Materials 87 112 .

Alan R. Dickson, Damien Even, Jeremy M. Warnes & Alan Fernyhough. (2014) The effect of reprocessing on the mechanical properties of polypropylene reinforced with wood pulp, flax or glass fibre. Composites Part A: Applied Science and Manufacturing 61, pages 258-267.
Crossref

Ester Rojo, M. Virginia Alonso, Juan C. Domínguez, Belén Del Saz-Orozco, Mercedes Oliet & Francisco Rodriguez. (2013) Alkali treatment of viscose cellulosic fibers from eucalyptus wood: Structural, morphological, and thermal analysis. Journal of Applied Polymer Science 130:3, pages 2198-2204.
Crossref

Morten Rask, Bo Madsen, Bent F. Sørensen, Julie L. Fife, Karolina Martyniuk & Erik M. Lauridsen. (2012) In situ observations of microscale damage evolution in unidirectional natural fibre composites. Composites Part A: Applied Science and Manufacturing 43:10, pages 1639-1649.
Crossref

Tuomas Hänninen, Anders Thygesen, Shahid Mehmood, Bo Madsen & Mark Hughes. (2012) Mechanical processing of bast fibres: The occurrence of damage and its effect on fibre structure. Industrial Crops and Products 39, pages 7-11.
Crossref

C. Baley, A. Le Duigou, A. Bourmaud & P. Davies. (2012) Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites. Composites Part A: Applied Science and Manufacturing 43:8, pages 1226-1233.
Crossref

Moyeenuddin A. Sawpan, Kim L. Pickering & Alan Fernyhough. (2012) Flexural properties of hemp fibre reinforced polylactide and unsaturated polyester composites. Composites Part A: Applied Science and Manufacturing 43:3, pages 519-526.
Crossref

Mindaugas Bulota, Supachok Tanpichai, Mark Hughes & Stephen J. Eichhorn. (2012) Micromechanics of TEMPO-Oxidized Fibrillated Cellulose Composites. ACS Applied Materials & Interfaces 4:1, pages 331-337.
Crossref

Mark Hughes. (2011) Defects in natural fibres: their origin, characteristics and implications for natural fibre-reinforced composites. Journal of Materials Science 47:2, pages 599-609.
Crossref

J Andersons, E Poriķe & E Spārniņš. (2011) Ultimate strain and deformability of elementary flax fibres. The Journal of Strain Analysis for Engineering Design 46:6, pages 428-435.
Crossref

Moyeenuddin A. Sawpan, Kim L. Pickering & Alan Fernyhough. (2011) Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres. Composites Part A: Applied Science and Manufacturing 42:8, pages 888-895.
Crossref

J. Andersons, E. Poriķe & E. Spārniņš. (2011) Modeling strength scatter of elementary flax fibers: The effect of mechanical damage and geometrical characteristics. Composites Part A: Applied Science and Manufacturing 42:5, pages 543-549.
Crossref

Dasong Dai & Mizi Fan. (2011) Investigation of the dislocation of natural fibres by Fourier-transform infrared spectroscopy. Vibrational Spectroscopy 55:2, pages 300-306.
Crossref

Tuomas Hänninen, Mark Hughes, Erwin Baur, Frank Otremba, Tim Huber, Nina Graupner, Jürg Müssig, Eugen Prömper, Martien van den Oever, Harriëtte Bos, Sanchita Bandyopadhyay‐Ghosh, Subrata Bandhu Ghosh & Mohini Sain. 2010. Industrial Applications of Natural Fibres. Industrial Applications of Natural Fibres 381 480 .

B. Bakri & S. J. Eichhorn. (2009) Elastic coils: deformation micromechanics of coir and celery fibres. Cellulose 17:1, pages 1-11.
Crossref

Dasong Dai & Mizi Fan. (2010) Characteristic and Performance of Elementary Hemp Fibre. Materials Sciences and Applications 01:06, pages 336-342.
Crossref

Q. Liu & M. Hughes. (2008) The fracture behaviour and toughness of woven flax fibre reinforced epoxy composites. Composites Part A: Applied Science and Manufacturing 39:10, pages 1644-1652.
Crossref

Lisbeth G. Thygesen & Mohammad R. Asgharipour. (2008) The effects of growth and storage conditions on dislocations in hemp fibres. Journal of Materials Science 43:10, pages 3670-3673.
Crossref

Lisbeth G. Thygesen. (2007) Quantification of dislocations in hemp fibers using acid hydrolysis and fiber segment length distributions. Journal of Materials Science 43:4, pages 1311-1317.
Crossref

B. Mottershead & S.J. Eichhorn. (2007) Deformation micromechanics of model regenerated cellulose fibre-epoxy/polyester composites. Composites Science and Technology 67:10, pages 2150-2159.
Crossref

K. Charlet, C. Baley, C. Morvan, J.P. Jernot, M. Gomina & J. Bréard. (2007) Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites. Composites Part A: Applied Science and Manufacturing 38:8, pages 1912-1921.
Crossref

Carlo Santulli. (2007) Impact properties of glass/plant fibre hybrid laminates. Journal of Materials Science 42:11, pages 3699-3707.
Crossref

Q. Liu, T. Stuart, M. Hughes, H.S.S. Sharma & G. Lyons. (2007) Structural biocomposites from flax – Part II: The use of PEG and PVA as interfacial compatibilising agents. Composites Part A: Applied Science and Manufacturing 38:5, pages 1403-1413.
Crossref

Mark Hughes, James Carpenter & Callum Hill. (2007) Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites. Journal of Materials Science 42:7, pages 2499-2511.
Crossref

Lisbeth G. Thygesen, Michaela Eder & Ingo Burgert. (2006) Dislocations in single hemp fibres—investigations into the relationship of structural distortions and tensile properties at the cell wall level. Journal of Materials Science 42:2, pages 558-564.
Crossref

Lisbeth G. Thygesen, Jørgen B. Bilde-Sørensen & Preben Hoffmeyer. (2006) Visualisation of dislocations in hemp fibres: A comparison between scanning electron microscopy (SEM) and polarized light microscopy (PLM). Industrial Crops and Products 24:2, pages 181-185.
Crossref

Paul A Fowler, J Mark Hughes & Robert M Elias. (2006) Biocomposites: technology, environmental credentials and market forces. Journal of the Science of Food and Agriculture 86:12, pages 1781-1789.
Crossref

T. Stuart, Q. Liu, M. Hughes, R.D. McCall, H.S.S. Sharma & A. Norton. (2006) Structural biocomposites from flax—Part I: Effect of bio-technical fibre modification on composite properties. Composites Part A: Applied Science and Manufacturing 37:3, pages 393-404.
Crossref

Lisbeth G. Thygesen & Preben Hoffmeyer. (2005) Image analysis for the quantification of dislocations in hemp fibres. Industrial Crops and Products 21:2, pages 173-184.
Crossref

S.J. Eichhorn & R.J. Young. (2004) Composite micromechanics of hemp fibres and epoxy resin microdroplets. Composites Science and Technology 64:5, pages 767-772.
Crossref

S. J. Eichhorn. 2004. Natural Fibers, Plastics and Composites. Natural Fibers, Plastics and Composites 287 303 .

S.J. Eichhorn & R.J. Young. (2003) Deformation micromechanics of natural cellulose fibre networks and composites. Composites Science and Technology 63:9, pages 1225-1230.
Crossref

George Marsh. (2003) Next step for automotive materials. Materials Today 6:4, pages 36-43.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

An investigation into the effects of micro-compressive defects on interphase behaviour in hemp-epoxy composites using half-fringe photoelasticity

Articles from other publishers (47)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature