Citations (66)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Rodrigo Patiño-Almanza, C. G. Flores-Hernandez, Rey Fernando García-Méndez & A. Almendarez-Camarillo. (2022) Keratin Modified and Functionalized as a Reinforcement and Nucleation Agent of β-Polypropylene Composites. Journal of Natural Fibers 19:17, pages 15448-15458.
Read now
Read now
Prabu krishnasamy, G. Rajamurugan, S Aravindraj & P Edwin Sudhagar. (2022) Vibration and Wear Characteristics of Aloevera/Flax/Hemp Woven Fiber Epoxy Composite Reinforced with Wire Mesh and BaSO4. Journal of Natural Fibers 19:8, pages 2885-2901.
Read now
Read now
Esubalew Dessie, Liu Fanxizi, Tamrat Tesfaye, Rotich Kipchirchir Gideon, Adane Dagnaw Gudayua & Yiping Qiu. (2022) Effect of silane treatment on tensile strength, moisture absorption and thermal property of unidirectional woven mat enset fibers reinforced polypropylene composite. Composite Interfaces 29:7, pages 795-815.
Read now
Read now
Marie Bayart, M. Reza Foruzanmehr, Pascal Y. Vuillaume, Pierre Ovlaque, Mathieu Robert & Saïd Elkoun. (2022) Poly(lactic acid)/flax composites: effect of surface modification and thermal treatment on interfacial adhesion, crystallization, microstructure, and mechanical properties. Composite Interfaces 29:1, pages 17-36.
Read now
Read now
Meriem Chebbi, Houda Guiras & Mehrez Jamei. (2020) Tensile behaviour analysis of compacted clayey soil reinforced with natural and synthetic fibers: effect of initial compaction conditions. European Journal of Environmental and Civil Engineering 24:3, pages 354-380.
Read now
Read now
S. Mouhoubi, M. E. H. Bourahli, H. Osmani & S. Abdeslam. (2017) Effect of Alkali Treatment on Alfa Fibers Behavior. Journal of Natural Fibers 14:2, pages 239-249.
Read now
Read now
Raluca
Nicoleta Darie, Ruxandra Bodirlau, Carmen
Alice Teaca, Joanna Macyszyn, Marek Kozlowski & Iuliana Spiridon. (2013) Influence of Accelerated Weathering on the Properties of Polypropylene/Polylactic Acid/Eucalyptus Wood Composites. International Journal of Polymer Analysis and Characterization 18:4, pages 315-327.
Read now
Read now
M. Khalid, C. T. Ratnam, C. A. Luqman, A. Salmiaton, T. S. Y. Choong & H. Jalaludin. (2009) Thermal and Dynamic Mechanical Behavior of Cellulose- and Oil Palm Empty Fruit Bunch (OPEFB)-Filled Polypropylene Biocomposites. Polymer-Plastics Technology and Engineering 48:12, pages 1244-1251.
Read now
Read now
A. K. Mohanty,
L. T. Drzal &
M. Misra. (2002) Engineered natural fiber reinforced polypropylene composites: influence of surface modifications and novel powder impregnation processing . Journal of Adhesion Science and Technology 16:8, pages 999-1015.
Read now
Read now
A. K. Mohanty,
M. Misra &
L. T. Drzal. (2001) Surface modifications of natural fibers and performance of the resulting biocomposites: An overview . Composite Interfaces 8:5, pages 313-343.
Read now
Read now
Articles from other publishers (56)
Bao Wang, Ying Zheng, Chengtao Yu & Pengju Pan. (2023) Polymer Crystallization on One-Dimensional Templates: From a Hybrid Shish-Kebab-like Structure to Material Properties. Crystal Growth & Design.
Crossref
Crossref
Hui Ma, Vijaykumar Guna, Tejas Raju, A. Narasimha Murthy & Narendra Reddy. (2023) Converting flax processing waste into value added biocomposites. Industrial Crops and Products 195, pages 116434.
Crossref
Crossref
Rafael Gouveia Lazarini & José Manoel Marconcini. (2021) Sugarcane bagasse fibers at high contents in thermoplastic composites: A novel approach using agro‐industrial residue via thermokinetic mixing. Polymer Composites 42:9, pages 4860-4871.
Crossref
Crossref
Floriane Lavorel, Mohamed El Mansori, Faissal Chegdani & Abdel Tazibt. (2021) Wear under brittle removal regime of an under-expanded cryogenic nitrogen jet machining of bio-composites. Wear 477, pages 203795.
Crossref
Crossref
Atul Kumar Maurya, Rupam Gogoi & Gaurav Manik. (2021) Study of the Moisture Mitigation and Toughening Effect of Fly‐ash Particles on Sisal Fiber‐Reinforced Hybrid Polypropylene Composites. Journal of Polymers and the Environment 29:7, pages 2321-2336.
Crossref
Crossref
Patrycja Bazan, Kamila Salasińska & Stanisław Kuciel. (2021) Flame retardant polypropylene reinforced with natural additives. Industrial Crops and Products 164, pages 113356.
Crossref
Crossref
Séverine A. E. Boyer, Jean‐Marc Haudin, Vivian Song, Vincent Bourassier, Patrick Navard & Cécile Barron. (2020) Transcrystallinity in maize tissues/polypropylene composites: First focus of the heterogeneous nucleation and growth stages versus tissue type. POLYMER CRYSTALLIZATION 4:1.
Crossref
Crossref
Dinesh & Sanjay Palsule. (2019) Structure and properties of recycled bamboo fiber reinforced chemically functionalized ethylene propylene rubber composites. Polymers and Polymer Composites 28:8-9, pages 609-622.
Crossref
Crossref
Hamid R Taghiyari, Ehsan Bari, Asghar Sistani, Mohammad Najafian, Mohammad Ali Tajick Ghanbary & Katie M Ohno. (2019) Biological resistance of nanoclay-treated plastic composites with different bamboo contents to three types of fungi. Journal of Thermoplastic Composite Materials 33:8, pages 1048-1060.
Crossref
Crossref
Xiaoting Liu, Xin Liu, Yanqin Li, Yunfei Zhang, Xin Xie, Ke Li, Zhenbin Chen, Liji Zhang, Zhenghua Tang & Zhen Liu. (2020) Nanoengineering of transparent polypropylene containing sorbitol-based clarifier. Journal of Polymer Research 27:8.
Crossref
Crossref
Elisa Barbosa de Brito, Lucas Galhardo Pimenta Tienne, Suellem Barbosa Cordeiro, Maria de Fátima Vieira Marques & Sergio Neves Monteiro. (2020) The influence of steam explosion treatment of green coffee cake on the thermal and mechanical properties of reinforced polypropylene matrix composites. Journal of Materials Research and Technology 9:3, pages 4051-4060.
Crossref
Crossref
Tae Won Lee, Suyeon Lee, Sun-Min Park & Doojin Lee. (2019) Mechanical, thermomechanical, and local anisotropy analyses of long basalt fiber reinforced polyamide 6 composites. Composite Structures 222, pages 110917.
Crossref
Crossref
M. Ramesh & C. Deepa. 2019. Green Composites. Green Composites
47
72
.
Tatyana Ageyeva, Tamás Bárány & József Karger-Kocsis. 2019. Polypropylene Handbook. Polypropylene Handbook
481
578
.
Seongyeol Pak, Sunmin Park, Young Seok Song & Doojin Lee. (2018) Micromechanical and dynamic mechanical analyses for characterizing improved interfacial strength of maleic anhydride compatibilized basalt fiber/polypropylene composites. Composite Structures 193, pages 73-79.
Crossref
Crossref
Yefei Tian, Jian Zhou & Jiachun Feng. (2018)
The effect of thermal history on crystalline structure and mechanical properties of
β
-nucleated isotactic polypropylene
. Materials Research Express 5:4, pages 045304.
Crossref
Crossref
Yuezhen Bin & Hai Wang. 2018. Crystallization in Multiphase Polymer Systems. Crystallization in Multiphase Polymer Systems
341
365
.
Mohammad Khalid, Chantara Thevy Ratnam, Luqman Chuah Abdullah, Rashmi Walvekar, Yern Chee Ching & Mohammad Reza Ketabchi. (2018) Mechanical and physical performance of cowdung-based polypropylene biocomposites. Polymer Composites 39:1, pages 288-296.
Crossref
Crossref
Jordi Girones, Loan T.T. Vo, Jean-Marc Haudin, Lionel Freire & Patrick Navard. (2017) Crystallization of polypropylene in the presence of biomass-based fillers of different compositions. Polymer 127, pages 220-231.
Crossref
Crossref
Yibo Yu, Shuo Yang, Huaning Yu, Jiang Li & Shaoyun Guo. (2017) Temperature-Dependent Alternating α- or β-Transcrystalline Layers in Coextruded Isotactic Polypropylene Multilayered Films. Macromolecules 50:13, pages 5098-5106.
Crossref
Crossref
Wei Luo, Bin Zhang, Huawei Zou, Mei Liang & Yang Chen. (2017) Enhanced interfacial adhesion between polypropylene and carbon fiber by graphene oxide/polyethyleneimine coating. Journal of Industrial and Engineering Chemistry 51, pages 129-139.
Crossref
Crossref
Francesc X. Espinach, Luis A. Granda, Quim Tarrés, Josep Duran, Pere Fullana-i-Palmer & Pere Mutjé. (2017) Mechanical and micromechanical tensile strength of eucalyptus bleached fibers reinforced polyoxymethylene composites. Composites Part B: Engineering 116, pages 333-339.
Crossref
Crossref
Koay Seong Chun, Salmah Husseinsyah & Nurul Fatin Syazwani. (2016) Properties of kapok husk-filled linear low-density polyethylene ecocomposites. Journal of Thermoplastic Composite Materials 29:12, pages 1641-1655.
Crossref
Crossref
Qianhong Jiang, Ying Zhao, Chunbo Zhang, Jian Yang, Yizhuang Xu & Dujin Wang. (2016) In-situ investigation on the structural evolution of mesomorphic isotactic polypropylene in a continuous heating process. Polymer 105, pages 133-143.
Crossref
Crossref
Sonia Boukettaya, Waseem Al Seddique, Ahmad Alawar, Hachmi Ben Daly & Adel Hammami. (2016) Cooling rate effects on the crystallization kinetics of polypropylene/date palm fiber composite materials. Science and Engineering of Composite Materials 23:5, pages 523-533.
Crossref
Crossref
M. Ramesh. (2016) Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties. Progress in Materials Science 78-79, pages 1-92.
Crossref
Crossref
José Alexandre Simão, Vitor Brait Carmona, José Manoel Marconcini, Luiz Henrique Capparelli Mattoso, Søren Talbro Barsberg & Anand Ramesh Sanadi. (2016) Effect of Fiber Treatment Condition and Coupling Agent on the Mechanical and Thermal Properties in Highly Filled Composites of Sugarcane Bagasse Fiber/PP. Materials Research 19:4, pages 746-751.
Crossref
Crossref
Vidhya Nagarajan, Kunyu Zhang, Manjusri Misra & Amar K. Mohanty. (2015) Overcoming the Fundamental Challenges in Improving the Impact Strength and Crystallinity of PLA Biocomposites: Influence of Nucleating Agent and Mold Temperature. ACS Applied Materials & Interfaces 7:21, pages 11203-11214.
Crossref
Crossref
Maria Raimo. (2015) On the origin of transcrystalline morphology in polymers and their composites: Re-evaluation of different views. Materials Today Communications 3, pages 137-140.
Crossref
Crossref
Roland Vogel, Regine Boldt, Marijan Vučak & Liane Häußler. (2014) Shear-induced shish-kebab structures in isotactic polypropylene using acicular precipitated calcium carbonate as whisker. Polymer Engineering & Science 54:9, pages 2057-2063.
Crossref
Crossref
Fauzani Md. Salleh, Aziz Hassan, Rosiyah Yahya, Ruth A. Lafia-Araga, Ahmad Danial Azzahari & Mohd Nazarul Zaman Mohd Nazir. (2014) Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene. Journal of Polymer Research 21:5.
Crossref
Crossref
A. Serrano, F.X. Espinach, J. Tresserras, R. del Rey, N. Pellicer & P. Mutje. (2014) Macro and micromechanics analysis of short fiber composites stiffness: The case of old newspaper fibers–polypropylene composites. Materials & Design 55, pages 319-324.
Crossref
Crossref
Douglas D. Stokke, Qinglin Wu & Guangping Han. 2013. Introduction to Wood and Natural Fiber Composites. Introduction to Wood and Natural Fiber Composites
237
285
.
Jieming Chen & Ning Yan. (2013) Crystallization behavior of organo-nanoclay treated and untreated kraft fiber–HDPE composites. Composites Part B: Engineering 54, pages 180-187.
Crossref
Crossref
Rafel Reixach, Francesc X. Espinach, Elena Franco-Marquès, Francisco Ramirez de Cartagena, Neus Pellicer, Josep Tresserras & Pere Mutjé. (2013) Modeling of the tensile moduli of mechanical, thermomechanical, and chemi-thermomechanical pulps from orange tree pruning. Polymer Composites 34:11, pages 1840-1846.
Crossref
Crossref
Mehdi Tajvidi, Arathi Mohan Sharma & Leonardo C Simon. (2013) Thermal transitions and temperature dependent mechanical behavior of wheat straw/talc isotactic/impact modified polypropylene composites. Journal of Reinforced Plastics and Composites 32:19, pages 1430-1443.
Crossref
Crossref
Jeevan Prasad Reddy, Manjusri Misra & Amar Mohanty. (2015) Injection Moulded Biocomposites from Oat Hull and Polypropylene/Polylactide Blend: Fabrication and Performance Evaluation. Advances in Mechanical Engineering 5, pages 761840.
Crossref
Crossref
Diène Ndiaye, Mamadou Gueye & Bouya Diop. (2012) Characterization, Physical and Mechanical Properties of Polypropylene/Wood-Flour Composites. Arabian Journal for Science and Engineering 38:1, pages 59-68.
Crossref
Crossref
Nanying Ning, Sirui Fu, Wei Zhang, Feng Chen, Ke Wang, Hua Deng, Qin Zhang & Qiang Fu. (2012) Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallization. Progress in Polymer Science 37:10, pages 1425-1455.
Crossref
Crossref
Seong Ok Han, Mehdi Karevan, I. Na Sim, Md A. Bhuiyan, Young Hun Jang, Jonathan Ghaffar & Kyriaki Kalaitzidou. (2012) Understanding the Reinforcing Mechanisms in Kenaf Fiber/PLA and Kenaf Fiber/PP Composites: A Comparative Study. International Journal of Polymer Science 2012, pages 1-8.
Crossref
Crossref
Yulin Feng, Yuexin Hu, Guiyan Zhao, Jinghua Yin & Wei Jiang. (2011) Preparation and mechanical properties of high‐performance short ramie fiber‐reinforced polypropylene composites. Journal of Applied Polymer Science 122:3, pages 1564-1571.
Crossref
Crossref
György J. Marosi. 2011. Handbook of Multiphase Polymer Systems. Handbook of Multiphase Polymer Systems
81
121
.
Hongwei Bai, Feng Luo, Tiannan Zhou, Hua Deng, Ke Wang & Qiang Fu. (2011) New insight on the annealing induced microstructural changes and their roles in the toughening of ?-form polypropylene. Polymer 52:10, pages 2351-2360.
Crossref
Crossref
N.-M. Barkoula & T. Peijs. 2011. Interface Engineering of Natural Fibre Composites for Maximum Performance. Interface Engineering of Natural Fibre Composites for Maximum Performance
43
81
.
Slawomir Borysiak, Dominik Paukszta, Paulina Batkowska & Jerzy Mańkowski. 2011. Cellulose Fibers: Bio- and Nano-Polymer Composites. Cellulose Fibers: Bio- and Nano-Polymer Composites
263
290
.
Mehdi Tajvidi & Akio Takemura. (2009) Thermal Degradation of Natural Fiber-reinforced Polypropylene Composites. Journal of Thermoplastic Composite Materials 23:3, pages 281-298.
Crossref
Crossref
Mehdi Tajvidi & Akio Takemura. (2008) Effect of fiber content and type, compatibilizer, and heating rate on thermogravimetric properties of natural fiber high density polyethylene composites. Polymer Composites 30:9, pages 1226-1233.
Crossref
Crossref
Anand Ramesh Sanadi & Daniel Caulfield. (2008) Thermoplastic polyolefins as formaldehyde free binders in highly filled lignocellulosic panel boards: using glycerine as a processing aid in kenaf fiber polypropylene boards. Materials Research 11:4, pages 487-492.
Crossref
Crossref
J.R. Araújo, W.R. Waldman & M.A. De Paoli. (2008) Thermal properties of high density polyethylene composites with natural fibres: Coupling agent effect. Polymer Degradation and Stability 93:10, pages 1770-1775.
Crossref
Crossref
N.E. ZAFEIROPOULOS. 2008. Properties and Performance of Natural-Fibre Composites. Properties and Performance of Natural-Fibre Composites
127
162
.
K OKSMAN NISKA & A R SANADI. 2008. Wood–Polymer Composites. Wood–Polymer Composites
41
71
.
Craig ClemonsAnand R. Sanadi. (2007) Instrumented Impact Testing of Kenaf Fiber Reinforced Polypropylene Composites: Effects of Temperature and Composition. Journal of Reinforced Plastics and Composites 26:15, pages 1587-1602.
Crossref
Crossref
Mehdi Tajvidi, Robert H. Falk & John C. Hermanson. (2006) Effect of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites studied by dynamic mechanical analysis. Journal of Applied Polymer Science 101:6, pages 4341-4349.
Crossref
Crossref
Thi-Thu-Loan Doan, Shang-Lin Gao & Edith Mäder. (2006) Jute/polypropylene composites I. Effect of matrix modification. Composites Science and Technology 66:7-8, pages 952-963.
Crossref
Crossref
Mehdi Tajvidi. (2005) Static and dynamic mechanical properties of a kenaf fiber–wood flour/polypropylene hybrid composite. Journal of Applied Polymer Science 98:2, pages 665-672.
Crossref
Crossref
Hui Quan, Zhong-Ming Li, Ming-Bo Yang & Rui Huang. (2005) On transcrystallinity in semi-crystalline polymer composites. Composites Science and Technology 65:7-8, pages 999-1021.
Crossref
Crossref