K. Logesh, P. Hariharasakthisudhan, Renjin J. Bright, A. Arul Marcel Moshi & Sathish Kannan. (2023) Exploring the formability of GLARE laminates enhanced with hybrid nanofillers through formability index, anisotropy, and surface crack length analysis. Polymer Composites 44:12, pages 8366-8377.
Crossref

Hao Liu, Haixiao Hu, Dongfeng Cao, Yundong Ji, Xiangjiang Wang, Hongda Chen & Shuxin Li. (2023) Investigation on the Influence of Fiber Bundle Undulating Architecture on Tensile Behavior of Filament Wound Composite Laminates. Materials 16:10, pages 3697.
Crossref

Yong-Cheol Jeong, Dong-Ha Lee, Seul-Kee Kim, Jeong-Hyeon Kim & Jae-Myung Lee. (2022) Cryogenic Reliability Evaluation of Glass Fabric–Reinforced Composites Using Novel Slip-Prevention Method. Materials 16:1, pages 121.
Crossref

F.A. Guimarães, V.A. Guimarães, F. Goedel, N.L. Batista, F.A. Silva, M.L. Costa & E.C. Botelho. (2022) Mechanical performance of Continuous/Short carbon Fiber-Reinforced Poly(phenylene sulfide) composites. Engineering Failure Analysis 141, pages 106613.
Crossref

Dong-Ju Yeom, Seoung-Gil Bang, Yeon-Jae Jeong, Hee-Tae Kim, Seong-Bo Park, Yong-Tai Kim, Hoon-Gyu Oh & Jae-Myung Lee. (2021) Applicability Assessment of　Epoxy Resin Reinforced Glass Fiber Composites Through Mechanical Properties in Cryogenic Environment for LNG CCS. Journal of the Society of Naval Architects of Korea 58:4, pages 262-270.
Crossref

Jonas Frank Reis, L. F. B. Marques, A. B. M. Abrahao, R. Z. Nakazato & E. C. Botelho. (2021) Feasibility study of the Oxy Fuel Gas Welding (OFW) process in AA2024-T3 and GF/PEI composite hybrid joint. Welding in the World 65:6, pages 1145-1160.
Crossref

Luigi Solazzi. (2021) Stress variability in multilayer composite hydraulic cylinder. Composite Structures 259, pages 113249.
Crossref

Teng Huang, Dongdong Zhang, Yaxin Huang, Chengfei Fan, Yuan Lin & Fukai Zhang. (2021) Flexural bearing capacity and failure mechanism of CFRP-aluminum laminate beam with double-channel cross-section. Science and Engineering of Composite Materials 28:1, pages 139-152.
Crossref

Alberto L. Santos, Roberto Z. Nakazato, Sebastian Schmeer & Edson C. Botelho. (2020) Influence of anodization of aluminum 2024 T3 for application in aluminum/Cf/ epoxy laminate. Composites Part B: Engineering 184, pages 107718.
Crossref

Yanyan Lin, Huaguan Li, Qilitai Wang, Zhibing Gong & Jie Tao. (2020) Effect of plasma surface treatment of aluminum alloy sheet on the properties of Al/Gf/PP laminates. Applied Surface Science 507, pages 145062.
Crossref

Luigi Solazzi. (2020) Design and experimental tests on hydraulic actuator made of composite material. Composite Structures 232, pages 111544.
Crossref

M.E. Kazemi, Logesh Shanmugam, Lei Yang & Jinglei Yang. (2020) A review on the hybrid titanium composite laminates (HTCLs) with focuses on surface treatments, fabrications, and mechanical properties. Composites Part A: Applied Science and Manufacturing 128, pages 105679.
Crossref

Monika Ostapiuk & Jarosław Bieniaś. (2019) Fracture Analysis and Shear Strength of Aluminum/CFRP and GFRP Adhesive Joint in Fiber Metal Laminates. Materials 13:1, pages 7.
Crossref

Anna Rudawska. (2019) Comparison of the adhesive joints’ strength of the similar and dissimilar systems of metal alloy/polymer composite. Applied Adhesion Science 7:1.
Crossref

Tran‐Vu Nong, Mostafa S.A. ElSayed & Camille Biseul. (2018) Experimental optimization and static characterization of modified fiber metal laminates with integrated mechanical interlock bonding system for aerospace applications. Polymer Composites 40:4, pages 1510-1525.
Crossref

B. Muthu Chozha Rajan, A. Senthil Kumar, T. Sornakumar, P. Senthamaraikannan & M. R. Sanjay. (2018) Multi Response Optimization of Fabrication Parameters of Carbon Fiber‐Reinforced Aluminium Laminates (CARAL): By Taguchi Method and Gray Relational Analysis. Polymer Composites 40:S2.
Crossref

Costanzo Bellini, Vittorio Di Cocco, Francesco Iacoviello & Luca Sorrentino. (2019) Influence of structural characteristics on the interlaminar shear strength of CFRP/Al fibre metal laminates. Procedia Structural Integrity 18, pages 373-378.
Crossref

Gurpinder Dhaliwal & Golam Newaz. (2018) Effect of Resin Rich Veil Cloth Layers on the Uniaxial Tensile Behavior of Carbon Fiber Reinforced Fiber Metal Laminates. Journal of Composites Science 2:4, pages 61.
Crossref

Hamed Aghamohammadi, S. Navid Hosseini Abbandanak, Reza Eslami-Farsani & S.M. Hossein Siadati. (2018) Effects of various aluminum surface treatments on the basalt fiber metal laminates interlaminar adhesion. International Journal of Adhesion and Adhesives 84, pages 184-193.
Crossref

Meni Shimel, Irina Gouzman, Eitan Grossman, Zahava Barkay, Sari Katz, Asaf Bolker, Noam Eliaz & Ronen Verker. (2018) Enhancement of Wetting and Mechanical Properties of UHMWPE‐Based Composites through Alumina Atomic Layer Deposition. Advanced Materials Interfaces 5:14.
Crossref

Ran Wei, Xiaoqun Wang, Chen Chen, Xu Zhang, Xuehong Xu & Shanyi Du. (2017) Effect of surface treatment on the interfacial adhesion performance of aluminum foil/CFRP laminates for cryogenic propellant tanks. Materials & Design 116, pages 188-198.
Crossref

Barbara Surowska, Patryk Jakubczak & Jarosław Bieniaś. 2017. Hybrid Polymer Composite Materials. Hybrid Polymer Composite Materials 193 234 .

Yiwei Xu, Huaguan Li, Yizhou Shen, Senyun Liu, Wentao Wang & Jie Tao. (2016) Improvement of adhesion performance between aluminum alloy sheet and epoxy based on anodizing technique. International Journal of Adhesion and Adhesives 70, pages 74-80.
Crossref

Gurpinder S Dhaliwal & Golam M Newaz. (2016) Experimental and numerical investigation of flexural behavior of carbon fiber reinforced aluminum laminates. Journal of Reinforced Plastics and Composites 35:12, pages 945-956.
Crossref

R.A. Pethrick. 2012. Welding and Joining of Aerospace Materials. Welding and Joining of Aerospace Materials 288 319 .

R.A. Pethrick. 2012. Welding and Joining of Aerospace Materials. Welding and Joining of Aerospace Materials 277 303 .

LR Le Bourlegat, CA Damato, DF da Silva, EC BotelhoLC Pardini. (2010) Processing and mechanical characterization of titanium-graphite hybrid laminates. Journal of Reinforced Plastics and Composites 29:22, pages 3392-3400.
Crossref

D.A. Da Silva, E.C. BotelhoM.C. Rezende. (2008) Hygrothermal Aging Effect on Fatigue Behavior of GLARE. Journal of Reinforced Plastics and Composites 28:20, pages 2487-2499.
Crossref

Stephan Hinz, Toshihiro Omoori, Masaki Hojo & Karl Schulte. (2009) Damage characterisation of fibre metal laminates under interlaminar shear load. Composites Part A: Applied Science and Manufacturing 40:6-7, pages 925-931.
Crossref

R. S. Almeida, C. A. Damato, E. C. Botelho, L. C. Pardini & M. C. Rezende. (2008) Effect of surface treatment on fatigue behavior of metal/carbon fiber laminates. Journal of Materials Science 43:9, pages 3173-3179.
Crossref

E. C. Botelho, R. S. Almeida, L. C. Pardini & M. C. Rezende. (2007) Influence of Hygrothermal Conditioning on the Elastic Properties of Carall Laminates. Applied Composite Materials 14:3, pages 209-222.
Crossref

E.C. Botelho, L.C. Pardini & M.C. Rezende. (2007) Evaluation of hygrothermal effects on the shear properties of Carall composites. Materials Science and Engineering: A 452-453, pages 292-301.
Crossref

Edson Cocchieri Botelho, Rogério Almeida Silva, Luiz Cláudio Pardini & Mirabel Cerqueira Rezende. (2006) A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures. Materials Research 9:3, pages 247-256.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Evaluation of adhesion of continuous fiber–epoxy composite/aluminum laminates

Articles from other publishers (33)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature