Citations (79)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (22)
Jailto A.P. da Silva, Lucas F.M. da Silva, António J.M. Ferreira, Volnei Tita & Ricardo De Medeiros. (2023) Parametric investigation of bonded composite joints under Mode II using a new methodology based on design of experiments. The Journal of Adhesion 0:0, pages 1-22.
Read now
Read now
Özkan Öz, Fatih Huzeyfe Öztürk & Can Güleç. (2023) Effect of fiber content and plasticizer on mechanical and joint properties of carbon fiber powder reinforced PLA manufactured by 3D printing process. Journal of Adhesion Science and Technology 37:15, pages 2208-2231.
Read now
Read now
G.C.G. Serra, P.N.B. Reis & J.A.M. Ferreira. (2023) Effect of cure temperature on the mechanical properties of epoxy-aluminium single lap joints. The Journal of Adhesion 99:9, pages 1441-1455.
Read now
Read now
Guido Di Bella, Tiziana Alderucci, Chiara Borsellino, Riccardo Miranda & Antonino Valenza. (2023) Comparative analysis between co-curing and adhesive bonding of glass-epoxy composite laminates and AA5083 aluminium sheets for Maritime application: effect of surface pattern. Journal of Adhesion Science and Technology 37:6, pages 945-960.
Read now
Read now
George C. Papanicolaou, Dimitrios Karagiannis, Charoula Kousiatza, Lykourgos C. Kontaxis & Diana V. Portan. (2023) Flexural behavior of single-lap joints of similar and dissimilar adherends. Journal of Adhesion Science and Technology 37:4, pages 624-648.
Read now
Read now
Hamidreza Borghei, Bashir Behjat & Mojtaba Yazdani. (2022) Effect of adhesive and nanocomposite layers on lap shear strength of layup bonded joints. Journal of Adhesion Science and Technology 36:7, pages 731-747.
Read now
Read now
Suganeswaran Kandasamy, Parameshwaran Rathinasamy, Nithyavathy Nagarajan, Deepandurai Karumalai, Mohanraj Thangamuthu & Muthukumar Palaniappan. (2022) Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach. Journal of Adhesion Science and Technology 36:6, pages 584-605.
Read now
Read now
Wang Guo, Peijian Chen, Hao Liu, Yugui Yang, Guangjian Peng & Zhitong Chen. (2021) On the strength and interfacial properties of square wave joints with defects and mismatches. The Journal of Adhesion 97:13, pages 1211-1233.
Read now
Read now
A. M. Amaro, P. N. B. Reis & A. Loureiro. (2021) Effect of friction-stir weld parameters on hybrid bonded joints. The Journal of Adhesion 97:12, pages 1136-1152.
Read now
Read now
M.J. Beigrezaee, M. R. Ayatollahi, B. Bahrami & L.F.M. da Silva. (2021) A new geometry for improving the strength of single lap joints using adherend notching technique. The Journal of Adhesion 97:11, pages 1004-1023.
Read now
Read now
Tarkan Akderya, Mehmet Çevik & Onur Sayman. (2020) Influence of thermal ageing on tensile performance of E-glass fibre/epoxy composite joints bonded with a diverse set of adhesives. The Journal of Adhesion 96:6, pages 539-564.
Read now
Read now
A. Akhavan-Safar, M. R. Ayatollahi, S. Rastegar & L. F. M. da Silva. (2017) Impact of geometry on the critical values of the stress intensity factor of adhesively bonded joints. Journal of Adhesion Science and Technology 31:18, pages 2071-2087.
Read now
Read now
Alp Özdemir, İbrahim Kocabaş & Pavel Svanda. (2016) Improving the strength of adhesively bonded joints through the introduction of various surface treatments. Journal of Adhesion Science and Technology 30:23, pages 2573-2595.
Read now
Read now
Yasmina Boutar, Sami Naïmi, Salah Mezlini, Lucas F. M. da Silva, Mohamed Hamdaoui & Moez Ben Sik Ali. (2016) Effect of adhesive thickness and surface roughness on the shear strength of aluminium one-component polyurethane adhesive single-lap joints for automotive applications. Journal of Adhesion Science and Technology 30:17, pages 1913-1929.
Read now
Read now
Sen Yang, Wei Xu, Lihong Liang, Tzuchiang Wang & Yueguang Wei. (2014) An experimental study on the dependence of the strength of adhesively bonded joints with thickness and mechanical properties of the adhesives. Journal of Adhesion Science and Technology 28:11, pages 1055-1071.
Read now
Read now
P.N. B. Reis, J.A. M. Ferreira, A.M. Pereira & F.J. V. Antunes. (2014) Influence of Superposition Length on Transverse Impact Response of Single-Strap Adhesive Joints. The Journal of Adhesion 90:1, pages 65-79.
Read now
Read now
Wei Xu & Yueguang Wei. (2013) Assessments for impact of adhesive properties: modeling strength of metallic single lap joints. Journal of Adhesion Science and Technology 27:1, pages 9-29.
Read now
Read now
Fábio
Gonçalves Teixeira & LucasF. M. da Silva. (2011) Study of Influence of Substrate Topography on Stress Distribution in Structural Adhesive Joints. The Journal of Adhesion 87:7-8, pages 671-687.
Read now
Read now
X. Zhao,
R. D. Adams &
L. F. M. da Silva. (2011) Single Lap Joints with Rounded Adherend Corners: Experimental Results and Strength Prediction. Journal of Adhesion Science and Technology 25:8, pages 837-856.
Read now
Read now
A. L. Loureiro, LucasF. M. da Silva, Chiaki Sato & M. A. V. Figueiredo. (2010) Comparison of the Mechanical Behaviour Between Stiff and Flexible Adhesive Joints for the Automotive Industry. The Journal of Adhesion 86:7, pages 765-787.
Read now
Read now
D. Castagnetti,
A. Spaggiari &
E. Dragoni. (2010) Robust Shape Optimization of Tubular Butt Joints for Characterizing Thin Adhesive Layers under Uniform Normal and Shear Stresses. Journal of Adhesion Science and Technology 24:11-12, pages 1959-1976.
Read now
Read now
MarianaD. Banea & LucasF. M. da Silva. (2009) Mechanical Characterization of Flexible Adhesives. The Journal of Adhesion 85:4-5, pages 261-285.
Read now
Read now
Articles from other publishers (57)
Pradeep Kumar Mishra, Nalini Padhee, Subhransu Kumar Panda, Erukala Kalyan Kumar & Subrata Kumar Panda. (2023) Free Vibration Frequency Prediction to Design Optimum Adhesively Bonded Composite Double Lap Joint. Journal of Vibration Engineering & Technologies.
Crossref
Crossref
Krishna Adhikari, Shishir Baral, Shubham Kumar & Ranjan K. Behera. (2023) Experimental study of the influence of pre-embedded defect shape and size on the performance of adhesively bonded single lap joints using Al-6061 adherends. Materials Today: Proceedings.
Crossref
Crossref
Yao Qiao, Robert J. Seffens, Ethan K. Nickerson, Timothy J. Roosendaal, Daniel R. Merkel, Yongsoon Shin, Jose L. Ramos, Seunghyun Ko, Avik Samanta, Madhusudhan R. Pallaka, Angel Ortiz & Kevin L. Simmons. (2023) A study of adhesive bonding in metal–metal, metal–CFRP, and CFRP–CFRP material combinations under shear deformation: Fracture morphologies and damage mechanisms. International Journal of Adhesion and Adhesives 127, pages 103511.
Crossref
Crossref
Georgino C. G. Serra, José A. M. Ferreira & Paulo N. B. Reis. (2023) Static and Fatigue Characterization of Adhesive T-Joints Involving Different Adherends. Processes 11:9, pages 2640.
Crossref
Crossref
Y.M. Haddou, M. Salem, A. Amiri, R. Amiri & S. Abid. (2023) Numerical analysis and optimization of adhesively-bonded single lap joints by adherend notching using a full factorial design of experiment. International Journal of Adhesion and Adhesives 126, pages 103482.
Crossref
Crossref
Engin Erbayrak, Beril Eker Gumus & Ercument Ugur Yuncuoglu. (2023) Experimental study of adhesively bonded joints with dissimilar composite laminates under different loading rates and ambient temperatures. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:5.
Crossref
Crossref
Mohammad Reza Khosravani, Payam Soltani & Tamara Reinicke. (2023) Effects of steps on the load bearing capacity of 3D-printed single lap joints. Journal of Materials Research and Technology 23, pages 1834-1847.
Crossref
Crossref
T. Alderucci, C. Borsellino & G. Di Bella. (2022) Effect of surface pattern on strength of structural lightweight bonded joints for marine applications. International Journal of Adhesion and Adhesives 117, pages 103005.
Crossref
Crossref
Karthik Ramaswamy, Ronan M. O'Higgins & Conor T. McCarthy. (2022) Impact damage tolerance and residual performance of novel interlocked-hybrid structural joints. Composites Part B: Engineering 241, pages 109996.
Crossref
Crossref
Hasan NajiMehr, Mahmoud Shariati, Pedram Zamani, Lucas F. M. da Silva & Danial Ghahremani Moghadam. (2021) Investigating on the influence of multi‐walled carbon nanotube and graphene nanoplatelet additives on residual strength of bonded joints subjected to partial fatigue loading. Journal of Applied Polymer Science 139:18.
Crossref
Crossref
Ahmed Hanafy Ibrahim & Duane S. Cronin. (2022) Mechanical testing of adhesive, self-piercing rivet, and hybrid jointed aluminum under tension loading. International Journal of Adhesion and Adhesives 113, pages 103066.
Crossref
Crossref
Mustafa BAKKAL, Hande OSMANOĞLU & Mehmet Safa BODUR. (2022) Metal/kompozit hibrit bağlantılarda yüzey işlemlerinin ara yüzey dayanımına etkisi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 37:2, pages 1033-1046.
Crossref
Crossref
Zhouliang Peng, Jinxia Huang & Zhiguang Guo. (2021) Anisotropic Janus materials: from micro-/nanostructures to applications. Nanoscale 13:45, pages 18839-18864.
Crossref
Crossref
S. Rakshe, S. V. Nimje & S. K. Panigrahi. 2021. Progress in Adhesion and Adhesives. Progress in Adhesion and Adhesives
29
46
.
Damjan Lolić, Dejan Zupan & Miha Brojan. (2020) A consistent finite element formulation for laminated composites with nonlinear interlaminar constitutive law. Composite Structures 247, pages 112445.
Crossref
Crossref
P. K. Mallick. 2020. Structural Adhesive Joints. Structural Adhesive Joints
79
96
.
Junying Min, Hailang Wan, Blair E. Carlson, Jianping Lin & Chengcheng Sun. (2020) Application of laser ablation in adhesive bonding of metallic materials: A review. Optics & Laser Technology 128, pages 106188.
Crossref
Crossref
Asraar Anjum, Jaffar Syed Mohamed Ali, Jalal Mohamed Zayan & Abdul Aabid. (2020) Statistical Analysis of Adhesive Bond Parameters in a Single Lap Joint System. Journal of Modern Mechanical Engineering and Technology 7, pages 53-58.
Crossref
Crossref
Hanumantharaya Rangaswamy, Irappa Sogalad, S. Basavarajappa, Santhosh Acharya & G. C. Manjunath Patel. (2020) Experimental analysis and prediction of strength of adhesive-bonded single-lap composite joints: Taguchi and artificial neural network approaches. SN Applied Sciences 2:6.
Crossref
Crossref
Yu BaiChengyu Qiu. (2020) Load-Dependent Composite Action for Beam Nonlinear and Ductile Behavior. Journal of Structural Engineering 146:4.
Crossref
Crossref
Wang Guo, Peijian Chen, Liyuan Yu, Guangjian Peng, Yucheng Zhao & Feng Gao. (2020) Numerical analysis of the strength and interfacial behaviour of adhesively bonded joints with varying bondline thicknesses. International Journal of Adhesion and Adhesives 98, pages 102553.
Crossref
Crossref
Peijian Chen, Wang Guo, Yucheng Zhao, Erxia Li, Yugui Yang & Hao Liu. (2019) Numerical analysis of the strength and interfacial properties of adhesive joints with graded adherends. International Journal of Adhesion and Adhesives 90, pages 88-96.
Crossref
Crossref
Fabio da Costa Garcia Filho, Michelle Souza Oliveira, Luana Cristyne da Cruz Demosthenes & Sergio Neves Monteiro. (2018) AVALIAÇÃO DA EFICIÊNCIA DE UMA JUNTA ADESIVA ANTES E APÓS TRATAMENTO SUPERFICIAL. AVALIAÇÃO DA EFICIÊNCIA DE UMA JUNTA ADESIVA ANTES E APÓS TRATAMENTO SUPERFICIAL.
A.M. Amaro, M.A. Neto, A. Loureiro & P.N.B. Reis. (2018) Taper’s angle influence on the structural integrity of single-lap bonded joints. Theoretical and Applied Fracture Mechanics 96, pages 231-246.
Crossref
Crossref
Arun Kumar, Kaushal Kumar, P.K. Ghosh, Ankit Rathi, K.L. Yadav & Raman. (2018) MWCNTs toward superior strength of epoxy adhesive joint on mild steel adherent. Composites Part B: Engineering 143, pages 207-216.
Crossref
Crossref
P.R. Jaiswal, N.S. Hirulkar, Loucas Papadakis, Roshan R. Jaiswal & Nilesh B. Joshi. (2018) Parametric study of non flat interface adhesively bonded joint. Materials Today: Proceedings 5:9, pages 17654-17663.
Crossref
Crossref
Andrew N. Rider, David R. Arnott & James J. Mazza. 2018. Aircraft Sustainment and Repair. Aircraft Sustainment and Repair
253
323
.
Lucas F. M. da Silva, Eduardo A. S. Marques & Raul D. S. G. Campilho. 2018. Handbook of Adhesion Technology. Handbook of Adhesion Technology
773
810
.
N. S. Hirulkar, P. R. Jaiswal, Loucas Papadakis, P. N. B. Reis & J. A. M. Ferreira. (2017) Joint strength optimization of single lap adhesive joints by surface patterning. Joint strength optimization of single lap adhesive joints by surface patterning.
A. Akhavan-Safar, M.R. Ayatollahi & L.F.M. da Silva. (2017) Strength prediction of adhesively bonded single lap joints with different bondline thicknesses: A critical longitudinal strain approach. International Journal of Solids and Structures 109, pages 189-198.
Crossref
Crossref
Lucas Filipe Martins da Silva, E. A. S. Marques & R. D. S. G. Campilho. 2017. Handbook of Adhesion Technology. Handbook of Adhesion Technology
1
39
.
Lijuan Liao & Chenguang Huang. (2016) Numerical analysis of effects of adhesive type and geometry on mixed-mode failure of adhesive joint. International Journal of Adhesion and Adhesives 68, pages 389-396.
Crossref
Crossref
P.N.B. Reis, J.R.L. Soares, A.M. Pereira & J.A.M. Ferreira. (2015) Effect of adherends and environment on static and transverse impact response of adhesive lap joints. Theoretical and Applied Fracture Mechanics 80, pages 79-86.
Crossref
Crossref
Heather J. Meredith & Jonathan J. Wilker. (2015) The Interplay of Modulus, Strength, and Ductility in Adhesive Design Using Biomimetic Polymer Chemistry. Advanced Functional Materials 25:31, pages 5057-5065.
Crossref
Crossref
Marcella D Carnes & Primus V Mtenga. (2015) The effect of materials and surface preparation on joining methods: A review. Journal of Reinforced Plastics and Composites 34:14, pages 1167-1178.
Crossref
Crossref
Philipp Weißgraeber, Julian Felger, Andreas Talmon l’Armée & Wilfried Becker. (2015) Crack initiation in single lap joints: effects of geometrical and material properties. International Journal of Fracture 192:2, pages 155-166.
Crossref
Crossref
Lijuan Liao, Toshiyuki Sawa & Chenguang Huang. (2014) Numerical analysis on load-bearing capacity and damage of double scarf adhesive joints subjected to combined loadings of tension and bending. International Journal of Adhesion and Adhesives 53, pages 65-71.
Crossref
Crossref
Wei Xu, Huichen Yu & Chunhu Tao. (2014) Influence of randomly distributed adhesive properties on the overall mechanical response of metallic adhesively bonded joints. International Journal of Adhesion and Adhesives 52, pages 48-56.
Crossref
Crossref
Lijuan Liao, Chenguang Huang & Toshiyuki Sawa. (2013) Effect of adhesive thickness, adhesive type and scarf angle on the mechanical properties of scarf adhesive joints. International Journal of Solids and Structures 50:25-26, pages 4333-4340.
Crossref
Crossref
Bartosz Bartczak, Jacek Mucha & Tomasz Trzepieciński. (2013) Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry. International Journal of Adhesion and Adhesives 45, pages 42-52.
Crossref
Crossref
E.F. Karachalios, R.D. Adams & Lucas F.M. da Silva. (2013) Single lap joints loaded in tension with ductile steel adherends. International Journal of Adhesion and Adhesives 43, pages 96-108.
Crossref
Crossref
Wei Xu & Yueguang Wei. (2013) Influence of adhesive thickness on local interface fracture and overall strength of metallic adhesive bonding structures. International Journal of Adhesion and Adhesives 40, pages 158-167.
Crossref
Crossref
D.C. O'Mahoney, K.B. Katnam, N.P. O'Dowd, C.T. McCarthy & T.M. Young. (2013) Taguchi analysis of bonded composite single-lap joints using a combined interface–adhesive damage model. International Journal of Adhesion and Adhesives 40, pages 168-178.
Crossref
Crossref
Yi Hua, Linxia Gu & Michael Trogdon. (2012) Three-dimensional modeling of carbon/epoxy to titanium single-lap joints with variable adhesive recess length. International Journal of Adhesion and Adhesives 38, pages 25-30.
Crossref
Crossref
R.D.S.G. Campilho, A.M.G. Pinto, M.D. Banea & L.F.M. da Silva. (2012) Optimization study of hybrid spot-welded/bonded single-lap joints. International Journal of Adhesion and Adhesives 37, pages 86-95.
Crossref
Crossref
Kimiyoshi Naito, Mutsumi Onta & Yasuo Kogo. (2012) The effect of adhesive thickness on tensile and shear strength of polyimide adhesive. International Journal of Adhesion and Adhesives 36, pages 77-85.
Crossref
Crossref
Konstantinos N. Anyfantis. (2012) Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials. Composite Structures 94:8, pages 2632-2639.
Crossref
Crossref
Heraldo S. da Costa Mattos, Eduardo M. Sampaio & Antonio H. Monteiro. (2012) A simple methodology for the design of metallic lap joints bonded with epoxy/ceramic composites. Composites Part B: Engineering 43:4, pages 1964-1969.
Crossref
Crossref
Wei Xu & Yueguang Wei. (2012) Strength and interface failure mechanism of adhesive joints. International Journal of Adhesion and Adhesives 34, pages 80-92.
Crossref
Crossref
Lucas Filipe Martins da Silva & Raul D. S. G. CampilhoLucas F. M. da Silva & Raul D. S. G. Campilho. 2012. Advances in Numerical Modeling of Adhesive Joints. Advances in Numerical Modeling of Adhesive Joints
1
93
.
P.N.B. Reis, J.A.M. Ferreira & F. Antunes. (2011) Effect of adherend's rigidity on the shear strength of single lap adhesive joints. International Journal of Adhesion and Adhesives 31:4, pages 193-201.
Crossref
Crossref
Z. Chen, R. D. Adams & Lucas F. M. Silva. (2010) Fracture toughness of bulk adhesives in mode I and mode III and curing effect. International Journal of Fracture 167:2, pages 221-234.
Crossref
Crossref
Lucas F. M. da Silva. 2011. Handbook of Adhesion Technology. Handbook of Adhesion Technology
689
723
.
Lucas F.M. da Silva, N.M.A.J. Ferreira, V. Richter-Trummer & E.A.S. Marques. (2010) Effect of grooves on the strength of adhesively bonded joints. International Journal of Adhesion and Adhesives 30:8, pages 735-743.
Crossref
Crossref
A.M. Pereira, J.M. Ferreira, F.V. Antunes & P.J. Bártolo. (2010) Analysis of manufacturing parameters on the shear strength of aluminium adhesive single-lap joints. Journal of Materials Processing Technology 210:4, pages 610-617.
Crossref
Crossref
Lucas. F.M. da Silva, R.J.C. Carbas, G.W. Critchlow, M.A.V. Figueiredo & K. Brown. (2009) Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints. International Journal of Adhesion and Adhesives 29:6, pages 621-632.
Crossref
Crossref
A.M. Pereira, J.M. Ferreira, F.V. Antunes & P.J. Bártolo. (2009) Study on the fatigue strength of AA 6082-T6 adhesive lap joints. International Journal of Adhesion and Adhesives 29:6, pages 633-638.
Crossref
Crossref