Citations (26)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
L Wang, Z S Hua, J Ma & G C Yao. (2011) Effects of Mg addition on foam stability of Al foams made by powder metallurgy route. Powder Metallurgy 54:3, pages 385-388.
Read now
Read now
Articles from other publishers (25)
Yoshihiko Hangai, Tatsuki Takagi, Shinji Koyama, Ryosuke Suzuki & Yuichiroh Kamakoshi. (2023) Refoaming of deformed aluminum foam fabricated by precursor foaming process using remaining foaming agent and densification using friction stir welding. Materials Letters 351, pages 135008.
Crossref
Crossref
KodliBasanth Kumar, Sunil B. Ingole, Ali saeedjassim, YatikaGori, Abhishek Kaushik, Deepak Kumar & Alok Jain. (2023) Aluminum-foam by powder metallurgy: A review. Materials Today: Proceedings.
Crossref
Crossref
Naveen Kumar, Ajaya Bharti, Devendra Prasad, Manju Verma & Akhilesh Kumar Chauhan. (2023) Investigations on physical and mechanical properties of Mg composites and foams fabricated by powder metallurgy using NaCl. Materials Today: Proceedings 78, pages 7-11.
Crossref
Crossref
Cihat Ensarioglu, Altug Bakirci, Huseyin Koluk & M. Cemal Cakir. 2022. Materials, Structures and Manufacturing for Aircraft. Materials, Structures and Manufacturing for Aircraft
27
63
.
Francisco García-Moreno & John Banhart. (2021) Influence of Gas Pressure and Blowing Agent Content on the Formation of Aluminum Alloy Foam. Advanced Engineering Materials 23:10, pages 2100242.
Crossref
Crossref
Naveen Kumar & Ajaya Bharti. (2021) Review on Powder Metallurgy: a Novel Technique for Recycling and Foaming of Aluminium-Based Materials. Powder Metallurgy and Metal Ceramics 60:1-2, pages 52-59.
Crossref
Crossref
Arif Uzun. (2019) Production of aluminium foams reinforced with silicon carbide and carbon nanotubes prepared by powder metallurgy method. Composites Part B: Engineering 172, pages 206-217.
Crossref
Crossref
Gang Chen, Klaus-Dieter Liss, Peng Cao, Xin Lu & Xuanhui Qu. (2018) Neutron Diffraction and Neutron Radiography Investigation into Powder Sintering of Ti/Al and TiH2/Al Compacts. Metallurgical and Materials Transactions B 50:1, pages 429-437.
Crossref
Crossref
T. GERAMIPOUR & H. OVEISI. (2017) Effects of foaming parameters on microstructure and compressive properties of aluminum foams produced by powder metallurgy method. Transactions of Nonferrous Metals Society of China 27:7, pages 1569-1579.
Crossref
Crossref
Francisco García-Moreno, Manas Mukherjee, Catalina Jiménez & John Banhart. (2015) Pressure-Induced Foaming of Metals. JOM 67:5, pages 955-965.
Crossref
Crossref
J. Lázaro, E. Solórzano, M. A. Rodríguez Pérez & F. García-Moreno. (2015) Pore connectivity of aluminium foams: effect of production parameters. Journal of Materials Science 50:8, pages 3149-3163.
Crossref
Crossref
Daniela Negri, Valerio Mussi, Simone Vezzù, Andrea Trentin, Silvano Rech & Michele Monno. (2014) On the Foamability of AlSi12 Precursors Prepared by High Velocity Compaction. Procedia Materials Science 4, pages 163-168.
Crossref
Crossref
Jaime Lázaro, Ester Laguna-Gutiérrez, Eusebio Solórzano & Miguel Angel Rodríguez-Pérez. (2013) Effect of Microstructural Anisotropy of PM Precursors on the Characteristic Expansion of Aluminum Foams. Metallurgical and Materials Transactions B 44:4, pages 984-991.
Crossref
Crossref
M. Covaciu, M. Walczak & J. Ramos-Grez. (2011) A method for manufacturing cellular metals with open- and close-type porosities. Materials Letters 65:19-20, pages 2947-2950.
Crossref
Crossref
M. Lafrance, M. Isac, F. Jalilian, K.E. Waters & R.A.L. Drew. (2011) The reactive stabilization of Al–Zn foams using a powder metallurgy approach. Materials Science and Engineering: A 528:21, pages 6497-6503.
Crossref
Crossref
Kenji Sekido, Teppei Seo & Koichi Kitazono. (2011) Anisotropic Compressive Behavior of Zn-22Al Superplastic Alloy Foams Manufactured Powder Metallurgy Process. Journal of the Japan Institute of Metals 75:5, pages 297-301.
Crossref
Crossref
S. Asavavisithchai & Andrew R. Kennedy. (2011) In-Situ Oxide Stabilization Development of Aluminum Foams in Powder Metallurgical Route. High Temperature Materials and Processes 30:1-2.
Crossref
Crossref
Koichi Kitazono, Teppei Seo & Yoshihiro Takiguchi. (2007) Room Temperature Superplastic Deformation of Closed-Cell Zinc Alloy Foams. Materials Science Forum 561-565, pages 1715-1718.
Crossref
Crossref
Koichi Kitazono & Yoshihiro Takiguchi. (2006) Strain rate sensitivity and energy absorption of Zn–22Al foams. Scripta Materialia 55:6, pages 501-504.
Crossref
Crossref
S. Asavavisithchai & A. R. Kennedy. (2006) The Effect of Compaction Method on the Expansion and Stability of Aluminium Foams. Advanced Engineering Materials 8:9, pages 810-815.
Crossref
Crossref
S. Asavavisithchai & A. R. Kennedy. (2006) The Role of Oxidation During Compaction on the Expansion and Stability of Al Foams Made Via a PM Route. Advanced Engineering Materials 8:6, pages 568-572.
Crossref
Crossref
Koichi Kitazono & Eiichi Sato. (2005) Closed-Cell Metal Foams Manufactured from Bulk Metal and Alloy Sheets through ARB Process. Materials Science Forum 475-479, pages 433-436.
Crossref
Crossref
D. Lehmhus & G. Rausch. (2004) Tailoring Titanium Hydride Decomposition Kinetics by Annealing in Various Atmospheres. Advanced Engineering Materials 6:5, pages 313-330.
Crossref
Crossref
K. Kitazono, E. Sato & K. Kuribayashi. (2004) Novel manufacturing process of closed-cell aluminum foam by accumulative roll-bonding. Scripta Materialia 50:4, pages 495-498.
Crossref
Crossref
Koichi Kitazono, Seiji Nishizawa, Eiichi Sato & Tetsuichi Motegi. (2004) Effect of ARB Cycle Number on Cell Morphology of Closed-Cell Al-Si Alloy Foam. MATERIALS TRANSACTIONS 45:7, pages 2389-2394.
Crossref
Crossref