Citations (60)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
R. Bidulsky, M. Actis Grande, E. Dudrova, M. Kabatova & J. Bidulska. (2016) Dry sliding wear behaviour of low alloyed sintered steels in relation to microstructure and fracture behaviour. Powder Metallurgy 59:2, pages 121-127.
Read now
Read now
A Mazahery & M O Shabani. (2013) Plastic deformation on worn surface of sintered diffusion alloyed Fe–Ni–Cu steel powders. Materials Technology 28:3, pages 117-121.
Read now
Read now
Simranpreet
Singh Gill, Harpreet Singh, Rupinder Singh & Jagdev Singh. (2011) Flank Wear and Machining Performance of Cryogenically Treated Tungsten Carbide Inserts. Materials and Manufacturing Processes 26:11, pages 1430-1441.
Read now
Read now
Articles from other publishers (57)
Samir Chakravarti & Swarnendu Sen. (2023) Study on the Behaviour of Surface Wear and Friction for a Pure Aluminium Casting Product Using Permanent Mould. Key Engineering Materials 944, pages 41-49.
Crossref
Crossref
Iryna Pohrelyuk, Serhii Lavrys, Khrystyna Shliakhetka, Dmytro Savvakin & Oleh Tkachuk. (2022) Influence of Manufacturing Parameters on Microstructure Evolution and Corrosion Resistance of Powder Metallurgy Titanium. JOM 75:3, pages 816-824.
Crossref
Crossref
Tolga YILMAZ, Dilan Zehra SEVİNDİROĞLU & Atakan SUVAY. (2022) Yüksek Karbonlu Toz Metalurjisi Çeliklerinin Su Verme ve Temperleme Davranışlarına Ham Yoğunluk Etkisinin İncelenmesiInvestigation of Effect of Green Density on Quenching and Tempering Behaviors of High Carbon Powder Metallurgy Steels. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 10:4, pages 978-986.
Crossref
Crossref
Magdalena Lemecha, Jerzy Napiórkowski, Krzysztof Ligier, Wojciech Tarasiuk & Krzysztof Sztukowski. (2022) Analysis of Wear Properties of Powder Metallurgy Steel in Abrasive Soil Mass. Materials 15:19, pages 6888.
Crossref
Crossref
Subin Antony Jose, Merbin John & Pradeep L. Menezes. (2022) Cermet Systems: Synthesis, Properties, and Applications. Ceramics 5:2, pages 210-236.
Crossref
Crossref
S. M. Lavrys, I. M. Pohrelyuk, A. G. Luk’yanenko & A. A. Dzhugan. (2022) Tribological Behavior of Porous Titanium after Thermal Oxidation. Materials Science 57:6, pages 858-864.
Crossref
Crossref
I. M. Pohreluyk, S. M. Lavrys & O. H. Lukyanenko. (2022) Influence of Porosity on Wear Resistance of Sintered Titanium under Boundary Lubrication. Journal of Friction and Wear 42:6, pages 461-465.
Crossref
Crossref
Avneesh Kumar, Ravi Kant & Harpreet Singh. (2021) Tribological behavior of cold-sprayed titanium/baghdadite composite coatings in dry and simulated body fluid environments. Surface and Coatings Technology 425, pages 127727.
Crossref
Crossref
Haktan Sıralı, Doğan Şimşek & Dursun Özyürek. (2020) Effect of Ti Content on Microstructure and Wear Performance of TZM Alloys Produced by Mechanical Alloying Method. Metals and Materials International 27:10, pages 4110-4119.
Crossref
Crossref
E. NaveenR. ShanmugamN. RoshanN. RamananK.N. Sripada Raghavendra. (2021) Influence of porosity and alloy addition on the wear behaviour of sinter-forged C45 steel using Taguchi method. Transactions of the Canadian Society for Mechanical Engineering 45:3, pages 363-373.
Crossref
Crossref
Zhirong Liao, Andrea la Monaca, James Murray, Alistair Speidel, Dmitrii Ushmaev, Adam Clare, Dragos Axinte & Rachid M'Saoubi. (2021) Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms. International Journal of Machine Tools and Manufacture 162, pages 103687.
Crossref
Crossref
S. K. Chaurasia, Vikram V. Dabhade, Ujjwal Prakash & S. K. Nath. (2021) Effect of Carbon Addition on Mechanical Properties and Dry Sliding Behavior of Fe-0.65P Alloy Processed by Powder Forging. Transactions of the Indian Institute of Metals 74:3, pages 735-742.
Crossref
Crossref
Junde Guo, Hang Du, Geng Zhang, Yan Cao, Junwen Shi & Wei Cao. (2020) Fabrication and tribological behavior of Fe-Cu-Ni-Sn-Graphite porous oil-bearing self-lubricating composite layer for maintenance-free sliding components. Materials Research Express 8:1, pages 015801.
Crossref
Crossref
S.A.A. Alem, R. Latifi, S. Angizi, N. Mohamadbeigi, M. Rajabi, E. Ghasali & Yasin Orooji. (2020) Development of Metal Matrix Composites and Nanocomposites Via Double-Pressing Double-Sintering (DPDS) Method. Materials Today Communications 25, pages 101245.
Crossref
Crossref
I. Farías, O. Jimenez, M. Flores, César D. Rivera-Tello, M.A. González & L. Olmos. (2020) Tribocorrosion behavior of Spark Plasma Sintering TiC reinforced Ti-based composites. Materials Letters 277, pages 128298.
Crossref
Crossref
Carola Martínez, Francisco Briones, Claudio Aguilar, Nicolás Araya, Iñigo Iturriza, Izabel Machado & Paula Rojas. (2020) Effect of hot pressing and hot isostatic pressing on the microstructure, hardness, and wear behavior of nickel. Materials Letters 273, pages 127944.
Crossref
Crossref
S. Senthur Prabu, S. Prathiba, M.A Asokan & Vaigandla Sai Akhil. (2020) Effect of titanium on dry sliding wear behavior of hot forged P/M low alloy steels. Materials Today: Proceedings 22, pages 1380-1389.
Crossref
Crossref
İjlal ŞİMŞEK, Dursun ÖZYÜREK & Doğan ŞİMŞEK. (2019) Farklı Presleme Basınçları İle Üretilen Toz Metal Çeliklerin Aşınma Davranışlarının BelirlenmesiDetermination of Wear Behavior of Powder Metal Steels Produced by Different Pressing Pressures. Nevşehir Bilim ve Teknoloji Dergisi 8, pages 54-62.
Crossref
Crossref
C D Bohórquez, S Pérez, A Sarmiento & M Mendoza. (2019) Sintering of a metal matrix composite Cu-Ti-TiC assisted by abnormal glow discharge. Journal of Physics: Conference Series 1386:1, pages 012043.
Crossref
Crossref
S Senthur Prabu. (2019) Investigating the influence of titanium on wear characteristics of P/M hot extruded alloy steels. Materials Research Express 6:10, pages 106548.
Crossref
Crossref
Т. О. Prikhna, V. Ya. Podhurs’ka, О. P. Ostash, B. D. Vasyliv, V. B. Sverdun, M. V. Karpets’ & T. B. Serbenyuk. (2019) Influence of the Technology of Production of Composites Based on the MAX Phases of Titanium on the Process of Wear in Contact with Copper. Part 2. Single-Stage Technology. Materials Science 55:1, pages 1-8.
Crossref
Crossref
J.W. Murray, R.B. Cook, N. Senin, S.J. Algodi & A.T. Clare. (2018) Defect-free TiC/Si multi-layer electrical discharge coatings. Materials & Design 155, pages 352-365.
Crossref
Crossref
Said Mechachti, Omar Benchiheub, Abdenabi Abidi, Noureddine Gherraf, Mosbah Zidani & Hichem Farh. (2017) Property Evaluation of Nitrided Layers of Porous Sintered Iron. International Journal of Engineering Research in Africa 32, pages 11-17.
Crossref
Crossref
Jose Daniel Biasoli De Mello, Cristiano Binder, Gisele Hammes, Roberto Binder & Aloisio Nelmo Klein. (2017) Tribological behaviour of sintered iron based self-lubricating composites. Friction 5:3, pages 285-307.
Crossref
Crossref
S. Senthur Prabu, S. Prathiba, M.A. Asokan, MK Sreelekh, Francis Steff & Mounish Sai. (2017) Influence of Tungsten on Dry Sliding Wear Behaviour of Sintered/Hot Extruded P/M Alloy Steels (Fe-C-W-Ti). Materials Research 20:4, pages 1050-1056.
Crossref
Crossref
M. Buciumeanu, A. Araujo, O. Carvalho, G. Miranda, J.C.M. Souza, F.S. Silva & B. Henriques. (2017) Study of the tribocorrosion behaviour of Ti6Al4V – HA biocomposites. Tribology International 107, pages 77-84.
Crossref
Crossref
R. Bidulský, J. Bidulská & M. Actis Grande. (2017) A New Approach to Heat Treatment of High-Strength Powder Steels. Metal Science and Heat Treatment 58:11-12, pages 734-737.
Crossref
Crossref
P. Philomen-D-Anand Raj, K. Palaniradja & A. GopalaKrishna. (2016) Friction and wear behavior of steam-oxidized ferrous PM compacts. Journal of Mechanical Science and Technology 30:10, pages 4535-4541.
Crossref
Crossref
James W. Murray & Adam T. Clare. (2016) Morphology and Wear Behaviour of Single and Multi-layer Electrical Discharge Coatings. Procedia CIRP 42, pages 236-239.
Crossref
Crossref
K.S. Alhawari, M.Z. Omar, M.J. Ghazali, M.S. Salleh & M.N. Mohammed. (2015) Evaluation of the microstructure and dry sliding wear behaviour of thixoformed A319 aluminium alloy. Materials & Design 76, pages 169-180.
Crossref
Crossref
F. Martin, C. García & Y. Blanco. (2015) Influence of residual porosity on the dry and lubricated sliding wear of a powder metallurgy austenitic stainless steel. Wear 328-329, pages 1-7.
Crossref
Crossref
Avijit Sinha & Zoheir Farhat. (2015) Effect of Surface Porosity on Tribological Properties of Sintered Pure Al and Al 6061. Materials Sciences and Applications 06:06, pages 549-566.
Crossref
Crossref
Avijit Sinha & Zoheir Farhat. (2015) A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys. Journal of Surface Engineered Materials and Advanced Technology 05:01, pages 1-16.
Crossref
Crossref
H. Proudhon, J. Savkova, S. Basseville, V. Guipont, M. Jeandin & G. Cailletaud. (2014) Experimental and numerical wear studies of porous Reactive Plasma Sprayed Ti?6Al?4V/TiN composite coating. Wear 311:1-2, pages 159-166.
Crossref
Crossref
Gisele Hammes, Renan Schroeder, Cristiano Binder, Aloisio N. Klein & Jose Daniel B. de Mello. (2014) Effect of double pressing/double sintering on the sliding wear of self-lubricating sintered composites. Tribology International 70, pages 119-127.
Crossref
Crossref
S. Senthur Prabu, S. Prathiba, N. Venkatesan, Ashu Sharma, Shakkeel Ahmed & Yesh A. Shah. (2014) Influence of Titanium on dry sliding Wear Behaviour of Sintered P/M low Alloy Steel (Fe-C-W). Procedia Engineering 97, pages 2110-2118.
Crossref
Crossref
S. Senthur Prabu, Ayush Choudhary, Anshul Jain & Ashu Sharma. (2014) Experimental Study on Dry Sliding Wear Behaviour of Sintered Fe-C-W P/M Low Alloy Steels. Procedia Materials Science 5, pages 809-816.
Crossref
Crossref
Suresh Kumar, Ratandeep Pandey, Ranvir Singh Panwar & O. P. Pandey. (2013) Effect of Particle Size on Wear of Particulate Reinforced Aluminum Alloy Composites at Elevated Temperatures. Journal of Materials Engineering and Performance 22:11, pages 3550-3560.
Crossref
Crossref
A. Mazahery & M. Shabani. (2012) Characterization of Wear Mechanisms in Sintered Fe-1.5 Wt % Cu Alloys. Archives of Metallurgy and Materials 57:1.
Crossref
Crossref
S Tekeli, A Güral & D Özyürek. (2011) Microstructure and dry sliding wear properties of 3Si–2Ni and 3Si–2Mn powder metallurgy steels with different graphite content. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 225:8, pages 814-820.
Crossref
Crossref
Shuangyu Liu, Hong Zhang & Jiandong Hu. (2011) Effect of carbusintering on densification behavior and mechanical properties of Fe–2%Ni–x%Cu alloys. Materials & Design 32:7, pages 3686-3691.
Crossref
Crossref
Md. Aminul Islam & Zoheir N. Farhat. (2011) Effect of porosity on dry sliding wear of Al?Si alloys. Tribology International 44:4, pages 498-504.
Crossref
Crossref
Kuan-Hong Lin. (2011) Wear behavior and mechanical performance of metal injection molded Fe?2Ni sintered components. Materials & Design 32:3, pages 1273-1282.
Crossref
Crossref
C. Kanchanomai, B. Saengwichian & A. Manonukul. (2009) Delamination wear of metal injection moulded 316L stainless steel. Wear 267:9-10, pages 1665-1672.
Crossref
Crossref
Q. Chen, D.Y. Li & Bruce Cook. (2009) Is porosity always detrimental to the wear resistance of materials??A computational study on the effect of porosity on erosive wear of TiC/Cu composites. Wear 267:5-8, pages 1153-1159.
Crossref
Crossref
M. Teimouri, M. Ahmadi, N. Pirayesh, M. Aliofkhazraei, M. Mousavi Khoee, H. Khorsand & S. Mirzamohammadi. (2009) Study of corrosion behavior for nitrocarburized sintered Astaloy CrM?+C. Journal of Alloys and Compounds 477:1-2, pages 591-595.
Crossref
Crossref
Xianfeng Dong, Jiandong Hu, Hongying Wang, Shuangyu Liu & Zuoxing Guo. (2009) A study on carbon concentration distribution and microstructure of P/M materials prepared by carbusintering. Journal of Materials Processing Technology 209:8, pages 3776-3782.
Crossref
Crossref
Lin ZHANG, Xuan-hui QU, Bo-hua DUAN, Xin-bo HE & Ming-li QIN. (2008) Effect of porosity on wear resistance of SiCp/Cu composites prepared by pressureless infiltration. Transactions of Nonferrous Metals Society of China 18:5, pages 1076-1082.
Crossref
Crossref
A. Babakhani, A. Haerian & M. Ghambri. (2008) Effect of heat treatment, lubricant and sintering temperature on dry sliding wear behavior of medium alloyed chromium PM steels. Journal of Materials Processing Technology 204:1-3, pages 192-198.
Crossref
Crossref
K. Venkateswaran, M. Kamaraj & K. Prasad Rao. (2016) Dry Sliding Wear of a Powder Metallurgy Copper-based Metal Matrix Composite Reinforced with Iron Aluminide Intermetallic Particles. Journal of Composite Materials 41:14, pages 1713-1728.
Crossref
Crossref
H. Özkan Gülsoy. (2007) Dry sliding wear in injection molded 17-4 PH stainless steel powder with nickel boride additions. Wear 262:3-4, pages 491-497.
Crossref
Crossref
Ahmet Güral, Süleyman Tekeli, Dursun ÖzyürekMetin Gürü. (2007) Effect of Repeated Quenching Heat Treatment on Microstructure and Dry Sliding Wear Behavior of Low Carbon PM Steel. Materials Science Forum 534-536, pages 673-676.
Crossref
Crossref
D. Grimanelis & T.S. Eyre. (2007) Wear characteristics of a diffusion bonded sintered steel with short term surface treatments. Wear 262:1-2, pages 93-103.
Crossref
Crossref
H. ?zkan G?lsoy, M. Kemal Bilici, Yahya Bozkurt & Serdar Salman. (2007) Enhancing the wear properties of iron based powder metallurgy alloys by boron additions. Materials & Design 28:7, pages 2255-2259.
Crossref
Crossref
S. Tekeli, A. G?ral & D. ?zy?rek. (2007) Dry sliding wear behavior of low carbon dual phase powder metallurgy steels. Materials & Design 28:5, pages 1685-1688.
Crossref
Crossref
Lorella Ceschini, Giuseppe Palombarini, Giuliano Sambogna, Donato Firrao, Giorgio Scavino & Graziano Ubertalli. (2006) Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests. Tribology International 39:8, pages 748-755.
Crossref
Crossref
Shuhaib Mushtaq, M.F. Wani, S.S. Saleem, Summera Banday, M. Junaid Mir, Jebran Khan & Jagtar Singh. (2018) Tribological Characteristics of Fe-Cu-Sn Alloy with Molybdenum Disulfide as a Solid Lubricant under Dry Conditions. SSRN Electronic Journal.
Crossref
Crossref