Advanced search
Publication Cover
Powder Metallurgy Volume 53, 2010 - Issue 4
Journal homepage
157
Views
15
CrossRef citations to date
0
Altmetric
Articles

Experimental and numerical analysis on sintering behaviours of injection moulded components in 316L stainless steel powder

J. SongFemto-ST Institute/DMAENSMM/University of Franche-Comte/CNRS, 24 Chemin de l'Epitaphe, Besancon 25000, France, Xiamen Honglu Tungsten Molybdenum Industry Co. Ltd, Xiamen 361021, P.R. China
,
T. BarriereFemto-ST Institute/DMAENSMM/University of Franche-Comte/CNRS, 24 Chemin de l'Epitaphe, Besancon 25000, France;, Email: [email protected]
,
B. LiuDepartment of Applied Mechanics and EngineeringSouthwest Jiaotong University, Chengdu 610031, China
,
J. C. GelinFemto-ST Institute/DMAENSMM/University of Franche-Comte/CNRS, 24 Chemin de l'Epitaphe, Besancon 25000, France
&
G. MichelFemto-ST Institute/DMAENSMM/University of Franche-Comte/CNRS, 24 Chemin de l'Epitaphe, Besancon 25000, France
Pages 295-304 | Published online: 19 Jul 2013

Citations (15)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (2)

T. Barriere, M. Sahli & A. Agne. (2020) Experimental investigation and numerical simulation analysis of sintered micro-fluidic devices. Powder Metallurgy 63:1, pages 1-8.
Read now
M. Sahli, J.-C. Gelin & T. Barrière. (2015) Simulation and modelling of sintering process for 316L stainless steel metal injection molding parts. Advances in Materials and Processing Technologies 1:3-4, pages 577-585.
Read now

Articles from other publishers (13)

Chao Liu, Mathias Herrmann, Yuanbin Deng, Anke Kaletsch & Christoph Broeckmann. (2023) Analysis of uniaxial viscosity and activation energy of deformation for 3Y-TZP by bending creep test. Ceramics International 49:14, pages 22806-22815.
Crossref
Alberto Cabo Rios, Eugene Olevsky, Eduard Hryha, Mats Persson & Rajendra K. Bordia. (2023) Analytical models for initial and intermediate stages of sintering of additively manufactured stainless steel. Acta Materialia 249, pages 118822.
Crossref
Yiwei Mao, Chao Cai, Jinkai Zhang, Yuhua Heng, Kunhao Feng, Daosheng Cai & Qingsong Wei. (2022) Effect of sintering temperature on binder jetting additively manufactured stainless steel 316L: densification, microstructure evolution and mechanical properties. Journal of Materials Research and Technology.
Crossref
Shahrooz Sadeghi Borujeni, Anwar Shad, Kiranmayi Abburi Venkata, Nico Günther & Vasily Ploshikhin. (2022) Numerical simulation of shrinkage and deformation during sintering in metal binder jetting with experimental validation. Materials & Design 216, pages 110490.
Crossref
Basil J. Paudel, Dave Conover, Jung-Kun Lee & Albert C. To. (2022) A computational framework for modeling distortion during sintering of binder jet printed parts. Journal of Micromechanics and Molecular Physics 06:04, pages 95-102.
Crossref
Kaiwen Zhang, Wei Zhang, Ryan Brune, Edward Herderick, Xu Zhang, John Cornell & Joy Forsmark. (2021) Numerical simulation and experimental measurement of pressureless sintering of stainless steel part printed by Binder Jetting Additive Manufacturing. Additive Manufacturing 47, pages 102330.
Crossref
O. J. Ojo-kupoluyi, S. M. Tahir, T. T. Dele-Afolabi & M. S. Anuar. (2020) Controlling the sintering response in the development of multilayered components produced via powder injection molding route—a review. The International Journal of Advanced Manufacturing Technology 107:9-10, pages 3755-3777.
Crossref
M. Sahli, H. Djoudi, J.-C. Gelin, T. Barriere & M. Assoul. (2017) Numerical simulation and experimental analysis of the sintered micro-parts using the powder injection molding process. Microsystem Technologies 24:3, pages 1495-1508.
Crossref
M. Sahli, A. Lebied, J-C. Gelin, T. Barrière & B. Necib. (2015) Numerical simulation and experimental analysis of solid-state sintering response of 316 L stainless steel micro-parts manufactured by metal injection molding. The International Journal of Advanced Manufacturing Technology 79:9-12, pages 2079-2092.
Crossref
Hui Bin Ou, Mohamed Sahli, Thierry Barrière & Jean Claude Gelin. (2015) Modeling, Identification and Simulation of the Sintering Stage for Micro-Bi-Material Components. Key Engineering Materials 651-653, pages 726-731.
Crossref
Mohamed Sahli, Jean Claude Gelin & Thierry Barrière. (2015) Simulation and Modeling of Sintering Process for 316L Stainless Steel Metal Injection Molding Parts. Key Engineering Materials 651-653, pages 32-37.
Crossref
Belgacem Mamen, Jiupeng Song, Thierry Barriere & Jean-Claude Gelin. (2015) Experimental and numerical analysis of the particle size effect on the densification behaviour of metal injection moulded tungsten parts during sintering. Powder Technology 270, pages 230-243.
Crossref
H. Ou, M. Sahli, J.-C. Gelin & T. Barrière. (2014) Experimental analysis and finite element simulation of the co-sintering of bi-material components. Powder Technology 268, pages 269-278.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.