Citations (21)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Piotr Skubisz & Henryk Adrian. (2018) Estimation of heat transfer coefficient of forced-air cooling and its experimental validation in controlled processing of forgings. Numerical Heat Transfer, Part A: Applications 73:3, pages 163-176.
Read now
Read now
R. Adalarasan, M. Santhanakumar & A. Shanmuga sundaram. (2017) Investigation in solid-state joining of Al/SiC/Al2O3 composite using Grey-based desirability (GBD) and response surface plots. Journal of the Chinese Institute of Engineers 40:1, pages 55-65.
Read now
Read now
A. Malekan, A. Pedram, Sh. Raygan, J. Rassizadeh ghani & M. Malekan. (2014) The influence of alkaline salt bath quenching on the microstructure and mechanical properties of AISI D2 steel. Canadian Metallurgical Quarterly 53:1, pages 88-92.
Read now
Read now
Articles from other publishers (18)
Umut Hanoglu & Božidar Šarler. (2021) Developments towards a Multiscale Meshless Rolling Simulation System. Materials 14:15, pages 4277.
Crossref
Crossref
Yu Zhang, Erjun Guo, Liping Wang, Sicong Zhao, Yan Li, Yanchun Li, Yicheng Feng & Meihui Song. (2020) Effect of the matrix structure on vermicular graphite cast iron properties. International Journal of Materials Research 111:5, pages 379-384.
Crossref
Crossref
Chung-Hyun Goh, Adam P. Dachowicz, Janet K. Allen & Farrokh Mistree. 2018. Integrated Computational Materials Engineering (ICME) for Metals. Integrated Computational Materials Engineering (ICME) for Metals
539
572
.
In Kim, Myungjin Lee, Yoonsuk Choi & Namhyun Kang. (2018) Effects of Mo Content on Low-Angle Misorientation Microstructure and Mechanical Properties of YS 550 MPa-Grade Steels for Offshore Structures. steel research international 89:2, pages 1700278.
Crossref
Crossref
R. Adalarasan, M. Santhanakumar & S. Thileepan. (2016) Selection of optimal machining parameters in pulsed CO2 laser cutting of Al6061/Al2O3 composite using Taguchi-based response surface methodology (T-RSM). The International Journal of Advanced Manufacturing Technology 93:1-4, pages 305-317.
Crossref
Crossref
M. Santhanakumar, R. Adalarasan & M. Rajmohan. (2015) Experimental Modelling and Analysis in Abrasive Waterjet Cutting of Ceramic Tiles Using Grey-Based Response Surface Methodology. Arabian Journal for Science and Engineering 40:11, pages 3299-3311.
Crossref
Crossref
R. Adalarasan & M. Santhanakumar. (2014) Application of Taguchi based Response Surface Method (TRSM) for Optimization of Multi Responses in Drilling Al/SiC/Al2O3 Hybrid Composite. Journal of The Institution of Engineers (India): Series C 96:1, pages 65-71.
Crossref
Crossref
Shankha Nag, Prithak Sardar, Anudeepika Jain, Abhishek Himanshu & Dipak Kumar Mondal. (2014) Correlation between ferrite grain size, microstructure and tensile properties of 0.17 wt% carbon steel with traces of microalloying elements. Materials Science and Engineering: A 597, pages 253-263.
Crossref
Crossref
Jin Guo, Shui Ping Hu, Zhen Li Mi & Dong Bin Zhang. (2013) Effect of Different Cooling Paths on the Microstructure and Properties of a Plain Carbon Steel. Materials Science Forum 762, pages 171-175.
Crossref
Crossref
Di Zhang, Yoshiaki Shintaku, Shuichi Suzuki & Yu-ichi Komizo. (2012) Effect of cooling rate on phase transformation in the low-carbon boron-treated steel. Journal of Materials Science 47:14, pages 5524-5528.
Crossref
Crossref
Dong Wei Zhao, Jian Chun Cao, Wei Chen, Lei Deng, Zhe Shi & Xin Qi. (2012) Effect of Cooling Rate after Deformation on Microstructure of V-N Microalloying High Strength Aseismic Rebar. Advanced Materials Research 482-484, pages 1600-1604.
Crossref
Crossref
Wengui Zhao, Wei Wang, Shaohui Chen & Jinbo Qu. (2011) Effect of simulated welding thermal cycle on microstructure and mechanical properties of X90 pipeline steel. Materials Science and Engineering: A 528:24, pages 7417-7422.
Crossref
Crossref
Xiao Yan Deng, Jin Cheng Xu, Wei Hua, Liang Liang Tian, Li Jun Ai & Jie Zhang. (2010) Effects of Mechanical Alloying on the Mechanical and Tribological Properties of Al-Cu-Mg Matrix Composites Reinforced by Sub-Micron Silicon Carbide Particles. Advanced Materials Research 123-125, pages 51-54.
Crossref
Crossref
Amer E. Amer, Min Y. Koo, Kyong H. Lee, Sang H. Kim & Soon H. Hong. (2009) Effect of welding heat input on microstructure and mechanical properties of simulated HAZ in Cu containing microalloyed steel. Journal of Materials Science 45:5, pages 1248-1254.
Crossref
Crossref
S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, T. Mannering, D. Panda & S. Jansto. (2007) Effect of cooling rate on the microstructure and mechanical properties of Nb-microalloyed steels. Materials Science and Engineering: A 460-461, pages 335-343.
Crossref
Crossref
S. Shanmugam, R.D.K. Misra, T. Mannering, D. Panda & S.G. Jansto. (2006) Impact toughness and microstructure relationship in niobium- and vanadium-microalloyed steels processed with varied cooling rates to similar yield strength. Materials Science and Engineering: A 437:2, pages 436-445.
Crossref
Crossref
K. Raghukandan, K. Hokamoto & P. Manikandan. (2004) Optimization of process parameters in explosive cladding of mild steel and aluminum. Metals and Materials International 10:2, pages 193-197.
Crossref
Crossref
Taro Kizu, Wolfgang Bleck & Christian Lesch. (2004) The Influence of Rapid Annealing Cycles on the Recrystallisation Behaviour of Cold Rolled Ultra Low Carbon and Low Carbon Steel. steel research international 75:4, pages 274-282.
Crossref
Crossref