Nicolás González-Santacruz, Patricia Muñoz-Marzagon, Miguel Bartolomé, Ana Moreno, Jennifer Huidobro & Sérgio Henrique Faria. (2023) Effects of impurities on the ice microstructure of Monte Perdido Glacier, Central Pyrenees, NE Spain. Annals of Glaciology, pages 1-14.
Crossref
Dong Wang, Chong Gao, Hong-Yun Luo, Yong-Hong Yang & Yue Ma. (2018) Texture evolution behavior and anisotropy of 2A97 Al–Li alloy during recrystallization at elevated temperature. Rare Metals 42:9, pages 3139-3149.
Crossref
Håkon W. Ånes, Antonius T.J. van Helvoort & Knut Marthinsen. (2023) Orientation dependent pinning of (sub)grains by dispersoids during recovery and recrystallization in an Al–Mn alloy. Acta Materialia 248, pages 118761.
Crossref
Tian-le Liu, Hao-ran Li, Yun-long Ma, Jin-feng Li, Dan-yang Liu, Ding-ding Lu & You-jie Guo. (2023) Investigation of anisotropy and structure variation of spray-formed 2195 Al-Li alloy via final temperature-controlled rolling and cold rolling. Journal of Alloys and Compounds 937, pages 168414.
Crossref
Manel Houria, Nedjoua Matougui, Brahim Mehdi, Nabil Kherrouba & Mohammad Jahazi. (2022) Effect of Plastic Anisotropy on the Kinetics of Static Softening in AA2024–T3 Aluminum Alloy. Metals and Materials International 28:9, pages 2042-2058.
Crossref
Peng Du, Haiyang Sun, Zhijie Wang, Yanming He, Guoliang Sheng, Jiaxin Zhang & Wenchang Liu. (2022) Effect of high pressure heat treatment on the recrystallization and recrystallization texture of CC AA 3003 aluminum alloy. Journal of Materials Research and Technology 19, pages 2388-2401.
Crossref
Nicholas E. Byres, Joao Quinta da Fonseca, Christopher S. Daniel, Jack Donoghue, Alec E. Davis, Pratheek Shanthraj, Benjamin Dod & Philip B. Prangnell. (2021) The evolution of abnormally coarse grain structures in beta-annealed Ti-6Al%-4V% rolled plates, observed by in-situ investigation. Acta Materialia 221, pages 117362.
Crossref
Jin-feng LENG, Bing-hui REN, Qing-bo ZHOU & Ji-wei ZHAO. (2021) Effect of Sc and Zr on recrystallization behavior of 7075 aluminum alloy. Transactions of Nonferrous Metals Society of China 31:9, pages 2545-2557.
Crossref
S. Dasari, A. Sarkar, A. Sharma, B. Gwalani, D. Choudhuri, V. Soni, S. Manda, I. Samajdar & R. Banerjee. (2021) Recovery of cold-worked Al0.3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation. Acta Materialia 202, pages 448-462.
Crossref
Frederike Brasche, Christian Haase, Marta Lipińska-Chwałek, Joachim Mayer & Dmitri A. Molodov. (2020) Combined κ-carbide precipitation and recovery enables ultra-high strength and ductility in light-weight steels. Materials Science and Engineering: A 795, pages 139928.
Crossref
Elisabeth Schwarzenböck, Eric Ollivier, Alistair Garner, Alex Cassell, Theo Hack, Zak Barrett, Christian Engel, Tim L. Burnett, N.J. Henry Holroyd, Joseph D. Robson & Phil B. Prangnell. (2020) Environmental cracking performance of new generation thick plate 7000-T7x series alloys in humid air. Corrosion Science 171, pages 108701.
Crossref
J. X. Zhang, H. Y. Sun, P. Du & W. C. Liu. (2020) Effect of Processing Method on the Recrystallization Behavior of Cold-Rolled AA3003 Aluminum Alloy. Journal of Materials Engineering and Performance 29:7, pages 4286-4294.
Crossref
X.W. Fang, H. Xiao, K. Marthinsen, A. Belyakov, X.Y. Fang & Ke Huang. (2020) Tailoring microstructure and texture of annealed Al-Mn alloy through the variation of homogenization and prior cold deformation strain. Materials Characterization, pages 110438.
Crossref
Fei Liu, Zhiyi Liu & Pengxiang Jia. (2020) Effect of T-phase on microstructure of the hot rolled Al–Cu–Mg alloy. Journal of Alloys and Compounds 825, pages 154190.
Crossref
Chen Li, Kun Liu & X.-Grant Chen. (2020) Improvement of elevated-temperature strength and recrystallization resistance via Mn-containing dispersoid strengthening in Al-Mg-Si 6082 alloys. Journal of Materials Science & Technology 39, pages 135-143.
Crossref
J.X. Zhang, H.Y. Sun, J. Li & W.C. Liu. (2019) Effect of precipitation state on recrystallization texture of continuous cast AA 2037 aluminum alloy. Materials Science and Engineering: A 754, pages 491-501.
Crossref
Zhipeng Yuan, Fangyun Tao, Jie Wen & Yiyou Tu. (2019) The Dependence of Microstructural Evolution and Corrosion Resistance of a Sandwich Multi-Layers Brazing Sheets on the Homogenization Annealing. IEEE Access 7, pages 121388-121394.
Crossref
W.X. Wang, J.X. Zhang, Z.J. Wang & W.C. Liu. (2018) A comparative study of the transformation kinetics of recrystallization texture of CC and DC 3003 aluminum alloys. Materials Characterization 141, pages 412-422.
Crossref
Ke Huang, Knut Marthinsen, Qinglong Zhao & Roland E. Logé. (2018) The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials. Progress in Materials Science 92, pages 284-359.
Crossref
Li Huang, Ling-fei Cao, Guang-jie Huang, Xiao-dong Wu & Ming-yong Xia. (2018) Effect of pre-recovery on subsequent recrystallization kinetics in moderately deformed and supersaturated Al-Mn alloys预回复处理对过饱和Al-Mn 合金再结晶动力学的影响. Journal of Central South University 25:3, pages 534-542.
Crossref
Qinglong Zhao, Huidi Zhang, Feng Qiu & Q.C. Jiang. (2018) Strain-induced precipitation kinetics during non-isothermal annealing of Al-Mn alloys. Journal of Alloys and Compounds 735, pages 2275-2280.
Crossref
Zhiqian Sun, Philip D. Edmondson & Yukinori Yamamoto. (2018) Effects of Laves phase particles on recovery and recrystallization behaviors of Nb-containing FeCrAl alloys. Acta Materialia 144, pages 716-727.
Crossref
K. Huang, K. Zhang, K. Marthinsen & R.E. Logé. (2017) Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization. Acta Materialia 141, pages 360-373.
Crossref
Saeed Khani Moghanaki, Mohsen Kazeminezhad & Roland Logé. (2017) Recrystallization behavior of multi-directionally forged over-aged and solution treated Al-Cu-Mg alloy during non-isothermal annealing. Materials & Design 132, pages 250-256.
Crossref
Zhiye Huang, Xingxing Zhang, Bolyu Xiao & Zongyi Ma. (2017) Hot deformation mechanisms and microstructure evolution of SiCp/2014Al composite. Journal of Alloys and Compounds 722, pages 145-157.
Crossref
Saeed Khani Moghanaki, Mohsen Kazeminezhad & Roland Logé. (2017) Effect of concurrent precipitation on the texture evolution during continuous heating of multi directionally forged solution treated Al-Cu-Mg alloy. Materials Characterization 131, pages 399-405.
Crossref
Khaled F. Adam, Zhengdong Long & David P. Field. (2017) Analysis of Particle-Stimulated Nucleation (PSN)-Dominated Recrystallization for Hot-Rolled 7050 Aluminum Alloy. Metallurgical and Materials Transactions A 48:4, pages 2062-2076.
Crossref
. 2017. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena
647
681
.
Yuan-yuan ZHAO, Zhen-yan ZHANG, Li JIN & Jie DONG. (2016) Effects of annealing process on sagging resistance of cold-rolled three-layer Al alloy clad sheets. Transactions of Nonferrous Metals Society of China 26:10, pages 2542-2551.
Crossref
Fanghua Shen, Bin Wang, Danqing Yi, Huiqun Liu, Cong Tang & Wenbin Shou. (2016) Effects of heating rate during solid-solution treatment on microstructure and fatigue properties of AA2524 T3 Al–Cu–Mg sheet. Materials & Design 104, pages 116-125.
Crossref
Latimuni Patra, Sumeet Mishra & N.P. Gurao. 2016. Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016). Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016)
231
238
.
Ning Wang, Ke Huang, Yanjun Li & Knut Marthinsen. (2016) The Influence of Processing Conditions on Microchemistry and the Softening Behavior of Cold Rolled Al-Mn-Fe-Si Alloys. Metals 6:3, pages 61.
Crossref
Qinglong Zhao, Ke Huang, Yanjun Li & Knut Marthinsen. (2016) Orientation Preference of Recrystallization in Supersaturated Aluminum Alloys Influenced by Concurrent Precipitation. Metallurgical and Materials Transactions A 47:3, pages 1378-1388.
Crossref
K. Huang, R. E. Logé & K. Marthinsen. (2015) On the sluggish recrystallization of a cold-rolled Al–Mn–Fe–Si alloy. Journal of Materials Science 51:3, pages 1632-1643.
Crossref
K. Huang & R.E. Logé. 2016. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Pizhi Zhao, Xinglin Chen, Wei Chen & Yonghao Zhang. 2016. Light Metals 2013. Light Metals 2013
341
346
.
Latimuni Patra, Sumeet Mishra & N. P. Gurao. 2016. Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016). Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016)
231
238
.
K. Huang & K. Marthinsen. (2015) The effect of heating rate on the softening behaviour of a deformed Al–Mn alloy with strong and weak concurrent precipitation. Materials Characterization 110, pages 215-221.
Crossref
Ke Huang, Qinglong Zhao, Yanjun Li & Knut Marthinsen. (2015) Two-stage annealing of a cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states. Journal of Materials Processing Technology 221, pages 87-99.
Crossref
Peyman Saidi, Sina Shahandeh & Jeffrey J. Hoyt. (2015) Relationship Between Recrystallization Kinetics and the Inhomogeneity of Stored Energy. Metallurgical and Materials Transactions A 46:7, pages 2975-2985.
Crossref
K. Huang, Y. J. Li & K. Marthinsen. (2015) Factors affecting the strength of P{011}〈566〉-texture after annealing of a cold-rolled Al–Mn–Fe–Si alloy. Journal of Materials Science 50:14, pages 5091-5103.
Crossref
K Huang, Y J Li & K Marthinsen. (2015) The influence of microchemistry on the recrystallization texture of cold-rolled Al-Mn-Fe-Si alloys. IOP Conference Series: Materials Science and Engineering 82, pages 012035.
Crossref
K. Huang, Y.J. Li & K. Marthinsen. (2015) Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al–Mn–Fe–Si alloy. Materials Characterization 102, pages 92-97.
Crossref
K. Huang, O. Engler, Y.J. Li & K. Marthinsen. (2015) Evolution in microstructure and properties during non-isothermal annealing of a cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states. Materials Science and Engineering: A 628, pages 216-229.
Crossref
L.H. Liao, H. Jin, M. Gallerneault & S. Esmaeili. (2015) Through-thickness recrystallization characteristics of a laminated AA3xxx–AA6xxx aluminum alloy system. Materials Characterization 101, pages 71-77.
Crossref
Ke Huang & Knut Marthinsen. 2015. Light Metals 2015. Light Metals 2015
153
162
.
Xiaofeng Wang, Mingxing Guo, Lingyong Cao, Jinru Luo, Jishan Zhang & Linzhong Zhuang. (2015) Effect of heating rate on mechanical property, microstructure and texture evolution of Al–Mg–Si–Cu alloy during solution treatment. Materials Science and Engineering: A 621, pages 8-17.
Crossref
Ke Huang & Knut Marthinsen. 2016. Light Metals 2015. Light Metals 2015
157
162
.
Ke HUANG, Yan-jun LI & Knut MARTHINSEN. (2014) Isothermal annealing of cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states. Transactions of Nonferrous Metals Society of China 24:12, pages 3840-3847.
Crossref
D. Tsivoulas & P.B. Prangnell. (2014) The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al–Cu–Li AA2198 sheet. Acta Materialia 77, pages 1-16.
Crossref
S.L. Xia, M. Ma, J.X. Zhang, W.X. Wang & W.C. Liu. (2014) Effect of heating rate on the microstructure, texture and tensile properties of continuous cast AA 5083 aluminum alloy. Materials Science and Engineering: A 609, pages 168-176.
Crossref
Ke Huang, Yan Jun Li & Knut Marthinsen. (2014) Microstructural Evolution during Isothermal Annealing of a Cold-Rolled Al-Mn-Fe-Si Alloy with Different Microchemistry States. Materials Science Forum 794-796, pages 1163-1168.
Crossref
Yiyou Tu, Huan Qian, Xuefeng Zhou & Jianqing Jiang. (2013) Effect of Scandium on the Interaction of Concurrent Precipitation and Recrystallization in Commercial AA3003 Aluminum Alloy. Metallurgical and Materials Transactions A 45:4, pages 1883-1891.
Crossref
M.R. Rokni, C.A. Widener & V.R. Champagne. (2014) Microstructural stability of ultrafine grained cold sprayed 6061 aluminum alloy. Applied Surface Science 290, pages 482-489.
Crossref
Yi You Tu & De Zhong Zhang. (2013) Effect of Homogenization on Recrystallization of Twin Roll Cast AA3003 Alloy. Applied Mechanics and Materials 404, pages 122-126.
Crossref
Wenchang Liu, Min Ma & Fuqian Yang. (2013) Effect of the Heat Treatment on the Cube Recrystallization Texture of Al-Mn-Mg Aluminum Alloy. Metallurgical and Materials Transactions A 44:6, pages 2857-2868.
Crossref
Wen Yang, Desheng Yan & Lijian Rong. (2013) The separation of recrystallization and precipitation processes in a cold-rolled Al–Mg–Sc solid solution. Scripta Materialia 68:8, pages 587-590.
Crossref
Pizhi Zhao, Xinglin Chen, Wei Chen & Yonghao Zhang. 2013. Light Metals 2013. Light Metals 2013
339
346
.
Ning Wang, Jarl Erik Flatøy, Yanjun Li & Knut Marthinsen. 2012. ICAA13: 13th International Conference on Aluminum Alloys. ICAA13: 13th International Conference on Aluminum Alloys
1837
1842
.
Ning Wang, Jarl Erik Flatøy, Yanjun Li & Knut Marthinsen. 2016. ICAA13 Pittsburgh. ICAA13 Pittsburgh
1837
1842
.
C. Schäfer, V. Mohles & G. Gottstein. (2011) Modeling of non-isothermal annealing: Interaction of recrystallization, recovery, and precipitation. Acta Materialia 59:17, pages 6574-6587.
Crossref
Carmen Schäfer & Günter Gottstein. (2011) The origin and development of the P{011}<111> orientation during recrystallization of particle-containing alloys. International Journal of Materials Research 102:9, pages 1106-1114.
Crossref
Ehsan Borhani, Hamidreza Jafarian, Hiroki Adachi, Daisuke Terada & Nobuhiro Tsuji. (2010) Annealing Behavior of Solution Treated and Aged Al-0.2wt% Sc Deformed by ARB. Materials Science Forum 667-669, pages 211-216.
Crossref
S. Tangen, K. Sjølstad, T. Furu & E. Nes. (2010) Effect of Concurrent Precipitation on Recrystallization and Evolution of the P-Texture Component in a Commercial Al-Mn Alloy. Metallurgical and Materials Transactions A 41:11, pages 2970-2983.
Crossref
W.C. Liu & B. Radhakrishnan. (2010) Recrystallization behavior of a supersaturated Al–Mn alloy. Materials Letters 64:16, pages 1829-1832.
Crossref
W.C. Liu, H. Yuan & M.J. Huang. (2009) Effect of Rolling Reduction on the P
$$ \left\{ {011} \right\}\left\langle {455} \right\rangle $$ Recrystallization Texture in a Supersaturated Al-Mn-Mg Alloy. Metallurgical and Materials Transactions A 40:12, pages 2794-2797.
Crossref
W.C. Liu, H. Yuan, M.J. Huang, D.Y. Cai & Q.X. Yang. (2009) Quantifying the recrystallization of cold rolled AA 3015 aluminum alloy by X-ray diffraction. Materials Science and Engineering: A 524:1-2, pages 168-175.
Crossref
Yucel Birol. (2009) Homogenization of a twin-roll cast thin Al–Mn strip. Journal of Alloys and Compounds 471:1-2, pages 122-127.
Crossref
B.A. Bouwhuis, S.K. Tang & G.D. Hibbard. (2008) Process–microstructure–property relationships in AA3003 expanded metal periodic cellular truss cores. Composites Part A: Applied Science and Manufacturing 39:9, pages 1556-1564.
Crossref
W.C. Liu, Z. Li & C.-S. Man. (2008) Effect of heating rate on the microstructure and texture of continuous cast AA 3105 aluminum alloy. Materials Science and Engineering: A 478:1-2, pages 173-180.
Crossref
Hans Erik Ekström, Stian Tangen, O.V. Mishin & Lars Östensson. (2007) The Softening of a Dispersoid-Rich Commercial Al-Mn Alloy. Materials Science Forum 550, pages 351-356.
Crossref
W.C. Liu & J.G. Morris. (2007) Recrystallization textures of the M{113}〈110〉 and P{011}〈455〉 orientations in a supersaturated Al–Mn alloy. Scripta Materialia 56:3, pages 217-220.
Crossref
Shang Ping Chen, A. Miroux & Sybrand van der Zwaag. (2006) Influence of Concurrent Precipitation on the Nucleation Kinetics during Recrystallisation in AA3003. Materials Science Forum 519-521, pages 1605-1610.
Crossref
Hans Erik Ekström, O.V. Mishin, Lars Östensson & Joacim Hagström. (2006) Softening of an AA3103 Alloy Analysed Using Gallium Enhanced Microscopy. Materials Science Forum 519-521, pages 1591-1596.
Crossref
Jiantao Liu, S. W. Banovic, R. J. Fields & J. G. Morris. (2006) Effect of intermediate heat treatment on microstructure and texture evolution of continuous cast Al-Mn-Mg alloy sheet. Metallurgical and Materials Transactions A 37:6, pages 1887-1898.
Crossref
W. C. Liu & J. G. Morris. (2005) Evolution of recrystallization and recrystallization texture in continuous-cast AA 3015 aluminum alloy. Metallurgical and Materials Transactions A 36:10, pages 2829-2848.
Crossref
Cynthia S.T. Chang, A.S.C. Yeung & B.J. Duggan. (2005) Producing a Random Recrystallization Texture in 6111 Aluminium Alloy. Materials Science Forum 495-497, pages 591-596.
Crossref
Jiantao Liu, S. W. Banovic, F. S. Biancaniello & R. D. Jiggetts. (2005) Through-thickness texture gradient in an annealed Al-Mg Alloy sheet. Metallurgical and Materials Transactions A 36:13, pages 869-874.
Crossref
Jiantao Liu, S. W. Banovic, F. S. Biancaniello & R. D. Jiggetts. (2005) Through-thickness texture gradient in an annealed Al-Mg alloy sheet. Metallurgical and Materials Transactions A 36:3, pages 869-874.
Crossref
Min Song, Ian Baker & David M. Cole. (2017) The effect of particles on dynamic recrystallization and fabric development of granular ice during creep. Journal of Glaciology 51:174, pages 377-382.
Crossref
J LIU & J MORRIS. (2004) Recrystallization microstructures and textures in AA 5052 continuous cast and direct chill cast aluminum alloy. Materials Science and Engineering A 385:1-2, pages 342-351.
Crossref
Knut Sjølstad, Knut Marthinsen & Erik Nes. (2004) Modelling the Softening Behaviour of Commercial AlMn-Alloys. Materials Science Forum 467-470, pages 677-682.
Crossref
A. Miroux, Zacharias J. Lok & Sybrand van der Zwaag. (2004) Recrystallisation and Concurrent Precipitation in Hot Rolled AA3103. Materials Science Forum 467-470, pages 393-398.
Crossref
John F. Humphreys. (2004) Nucleation in Recrystallization. Materials Science Forum 467-470, pages 107-116.
Crossref
. 2004. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena
557
615
.