Citations (80)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
M. Wallner, R. Schneider, K. Steineder & C. Sommitsch. (2021) Effect of Si and Al on microstructure-property-relationship of Q&P-steels during galvannealing. Materials Science and Technology 37:2, pages 182-189.
Read now
Read now
A. Pourfarokh, H. R. Jafarian, A. R. Eivani, Y. Palizdar & N. Park. (2020) Regulating tensile properties through bainitic transformation temperature in a hot-rolled δ-TRIP steel. Materials Science and Technology 36:2, pages 223-232.
Read now
Read now
P. Chen, G. D. Wang, X. C. Xiong & H. L. Yi. (2016) Abnormal expansion due to pearlite-to-austenite transformation in high aluminium-added steels. Materials Science and Technology 32:16, pages 1678-1682.
Read now
Read now
C. Thorning & S. Sridhar. (2007) Grain boundary ridge formation during initial high temperature oxidation of Mn/Al TRIP steel. Philosophical Magazine 87:23, pages 3479-3499.
Read now
Read now
Articles from other publishers (76)
Kazi M. H. Bhadhon, Daniella M. Pallisco & Joseph R. McDermid. (2023) Continuous Hot‐Dip Galvanizing of Medium‐Manganese Third‐Generation Advanced High‐Strength Steels. steel research international 94:11.
Crossref
Crossref
Wangwang Yu, Haijun Pan, Bin Zhang, Bo Huang, Xinyu Li, Yujie Zhao, Jing Li, Min Ji, Ze Sun, Zhen Zhang & Lin Liu. (2023) Influence of Laser Power on Microstructure and Mechanical Properties of Laser Welded Medium Manganese Transformation-Induced Plasticity Steel. Journal of Materials Engineering and Performance.
Crossref
Crossref
Daniella M. Pallisco & Joseph R. McDermid. (2023) On the Selective Oxidation of a 0.15C-6Mn-2Al-1Si Third-Generation Advanced High Strength Steel During Two-Stage Annealing Treatments. Metallurgical and Materials Transactions A 54:4, pages 1296-1319.
Crossref
Crossref
Arnold R. Marder & Frank E. Goodwin. 2023. The Metallurgy of Zinc Coated Steels. The Metallurgy of Zinc Coated Steels
567
585
.
Chun Lin Li, Liang Xiao, Lin Li, Xu Xin, Rui Kun Zhang & Ren Dong Liu. (2022) Effect of Bainite/Martensite/Retained Austenite Triplex Microstructure on the High Strain Rate Behavior of a One Step Quenching and Partitioning Steel. Materials Science Forum 1072, pages 45-54.
Crossref
Crossref
K. M. H. Bhadhon & J. R. McDermid. (2022) Selective Oxidation of a Medium-Mn Third Generation Advanced High Strength Steel during Austenitizing and Intercritical Annealing. Journal of The Electrochemical Society 169:6, pages 061504.
Crossref
Crossref
Jin-Young Lee, Minjeong Kim & Young-Kook Lee. (2022) Design of high strength medium-Mn steel using machine learning. Materials Science and Engineering: A 843, pages 143148.
Crossref
Crossref
M. Wallner, K. Steineder, R. Schneider, C. Commenda & C. Sommitsch. (2022) Effect of galvannealing on the microstructural and mechanical properties of a Si and Al alloyed medium-Mn quenching and partitioning steels. Materials Science and Engineering: A 841, pages 143067.
Crossref
Crossref
Suman Sadhu, Anindita Chakraborty, Shiv Brat Singh & Arup Kumar Halder. 2022. Recent Advances in Manufacturing Processes. Recent Advances in Manufacturing Processes
77
90
.
Aleksandra Królicka, Andrzej M. Żak & Francisca G. Caballero. (2021) Enhancing technological prospect of nanostructured bainitic steels by the control of thermal stability of austenite. Materials & Design 211, pages 110143.
Crossref
Crossref
Y. Najafi, F. Malek Ghaini, Y. Palizdar, S. Gholami Shiri & M. Pakniat. (2021) Microstructural characteristics of fusion zone in continuous wave fiber laser welded Nb-modified δ-TRIP steel. Journal of Materials Research and Technology 15, pages 3635-3646.
Crossref
Crossref
D. V. Prosvirnin, M. S. Larionov, S. V. Pivovarchik & A. G. Kolmakov. (2021) Structural Features and Strength Behavior of TRIP/TWIP Steels. Inorganic Materials: Applied Research 12:5, pages 1148-1156.
Crossref
Crossref
Achintya Kumar Patra, C.N. Athreya, Sumantra Mandal, K.C. Hari Kumar & V. Subramanya Sarma. (2021) High strength-high ductility medium Mn steel obtained through CALPHAD based alloy design and thermomechanical processing. Materials Science and Engineering: A 810, pages 140756.
Crossref
Crossref
Wook-Sang Jeon, Ashutosh Sharma & Jae Pil Jung. (2020) Liquid Metal Embrittlement of Galvanized TRIP Steels in Resistance Spot Welding. Metals 10:6, pages 787.
Crossref
Crossref
D V Prosvirnin, M D Larionov, A G Kolmakov, A V Larionova, M E Pruckov & S V Pivovarchik. (2020) Surface modification TRIP \ TWIP steels. IOP Conference Series: Materials Science and Engineering 848:1, pages 012075.
Crossref
Crossref
A. El-Sherbiny, Mohamed K. El-Fawkhry, Ahmed Y. Shash & T. El-Hossany. (2020) Replacement of silicon by aluminum with the aid of vanadium for galvanized TRIP steel. Journal of Materials Research and Technology 9:3, pages 3578-3589.
Crossref
Crossref
Santigopal Samanta, Arup Kumar Halder, Yashwardhan Deo, Sounak Guha & Monojit Dutta. (2019) Effect of Mn and Cr on the selective oxidation, surface segregation and hot-dip Zn coatability. Surface and Coatings Technology 377, pages 124908.
Crossref
Crossref
Xu Han, Christopher DiGiovanni, Joseph McDermid, Elliot Biro & Norman Y. Zhou. (2019) Effect of internal oxidation on the weldability of CMnSi steels. Welding in the World 63:6, pages 1633-1639.
Crossref
Crossref
Tuomo Nyyssönen, Olli Oja, Petri Jussila, Ari Saastamoinen, Mahesh Somani & Pasi Peura. (2019) Quenching and Partitioning of Multiphase Aluminum-Added Steels. Metals 9:3, pages 373.
Crossref
Crossref
Peikang Xia, F. Vercruysse, Roumen Petrov, Ilchat Sabirov, Miguel Castillo-Rodríguez & Patricia Verleysen. (2019) High strain rate tensile behavior of a quenching and partitioning (Q&P) Fe-0.25C-1.5Si-3.0Mn steel. Materials Science and Engineering: A 745, pages 53-62.
Crossref
Crossref
T. Nyyssönen, P. Peura, E. De Moor, D. Williamson & V.-T. Kuokkala. (2019) Crystallography and mechanical properties of intercritically annealed quench and partitioned high-aluminum steel. Materials Characterization 148, pages 71-80.
Crossref
Crossref
Maedeh Pourmajidian & Joseph R. McDermid. (2019) On the reactive wetting of a medium-Mn advanced high-strength steel during continuous galvanizing. Surface and Coatings Technology 357, pages 418-426.
Crossref
Crossref
Sourabh Chatterjee, Soumyajit Koley, Rudra Bubai Sarkar, Nibedita Behera, Manindra Manna, Subrata Mukherjee & Saurabh Kundu. (2018) Design and Development of Galvannealed Dual-Phase Steel: Microstructure, Mechanical Properties and Weldability. Journal of Materials Engineering and Performance 28:1, pages 231-241.
Crossref
Crossref
Shengping He, Zhirong Li, Zhuo Chen, Ting Wu & Qian Wang. (2019) Review of Mold Fluxes for Continuous Casting of High-Alloy (Al, Mn, Ti) Steels. steel research international 90:1, pages 1800424.
Crossref
Crossref
Li Gong, Nathalie Ruscassier, Mehdi Ayouz & Marie Laurence Giorgi. (2018) Nucleation and Growth of Oxide Particles on Fe-Mn (1 Wt.%) Binary Alloy during Annealing. Materials Science Forum 941, pages 1010-1015.
Crossref
Crossref
Maedeh Pourmajidian, Brian Langelier & Joseph R. McDermid. (2018) Effect of Process Atmosphere Dew Point and Tin Addition on Oxide Morphology and Growth for a Medium-Mn Third Generation Advanced Steel During Intercritical Annealing. Metallurgical and Materials Transactions A 49:11, pages 5561-5573.
Crossref
Crossref
G. Seyed Mousavi & J. R. McDermid. (2018) Selective Oxidation of a C-2Mn-1.3Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Heat Treatments. Metallurgical and Materials Transactions A 49:11, pages 5546-5560.
Crossref
Crossref
Ghazal Seyed Mousavi & Joseph R. McDermid. (2018) Effect of dew point on the reactive wetting of a C-2Mn-1.3Si (wt%) advanced high strength steel during continuous galvanizing. Surface and Coatings Technology 351, pages 11-20.
Crossref
Crossref
Xinyan Jin, Guangkui Hu, Hongwei Qian & Hua Wang. (2018) Effect of Dew Point on Galvanizability in 4 Mass% Al Added Low Density Steel. ISIJ International 58:9, pages 1584-1591.
Crossref
Crossref
H. Q. Huang, H. S. Di, N. Yan, J. C. Zhang, Y. G. Deng, R. D. K. Misra & J. P. Li. (2017) Hot Deformation Behavior and Processing Maps of a High Al-low Si Transformation-Induced Plasticity Steel: Microstructural Evolution and Flow Stress Behavior. Acta Metallurgica Sinica (English Letters) 31:5, pages 503-514.
Crossref
Crossref
Maedeh Pourmajidian & Joseph R. McDermid. (2018) Selective Oxidation of a 0.1C-6Mn-2Si Third Generation Advanced High-Strength Steel During Dew-Point Controlled Annealing. Metallurgical and Materials Transactions A 49:5, pages 1795-1808.
Crossref
Crossref
N. Saeidi, M. Raeissi, H.R. Vaghei & M.M. Abdar. (2017) Extraordinary strength and ductility obtained in transformation-induced plasticity steel by slightly modifying its chemical composition. Materials Science and Engineering: A 702, pages 225-231.
Crossref
Crossref
M. Manna & M. Dutta. (2017) Effect of prior electro or electroless Ni plating layer in galvanizing and galvannealing behavior of high strength steel sheet. Surface and Coatings Technology 316, pages 48-58.
Crossref
Crossref
K. Jahns, K. Balinski, M. Landwehr, J. Wübbelmann & U. Krupp. (2017) Prediction of high temperature corrosion phenomena by the cellular automata approach. Materials and Corrosion 68:2, pages 125-132.
Crossref
Crossref
Alberto Monsalve, Alexis Guzmán, Flavio De Barbieri, Alfredo Artigas, Linton Carvajal, Oscar Bustos, Nelson F. Garza-Montes-de Oca & Rafael Colás. (2016) Mechanical and Microstructural Characterization of an Aluminum Bearing Trip Steel. Metallurgical and Materials Transactions A 47:6, pages 3088-3094.
Crossref
Crossref
Prita Dewi Basoeki. Metallurgical aspects of process changing for commercial C-Mn steel into dual phase steel for automotive materials. Metallurgical aspects of process changing for commercial C-Mn steel into dual phase steel for automotive materials.
Murugaiyan Amirthalingam, E. M. van der Aa, C. Kwakernaak, M. J. M. Hermans & I. M. Richardson. (2015) Elemental segregation during resistance spot welding of boron containing advanced high strength steels. Welding in the World 59:5, pages 743-755.
Crossref
Crossref
Z.C. Li, H. Ding & Z.H. Cai. (2015) Mechanical properties and austenite stability in hot-rolled 0.2C–1.6/3.2Al–6Mn–Fe TRIP steel. Materials Science and Engineering: A 639, pages 559-566.
Crossref
Crossref
She-ming Jiang, Shi-jie Feng, Xun-hua Yuan, Yuan-peng Li, Zhen-hua Li & Qi-fu Zhang. (2014) Influence of Oxide Morphologies on Galvanizability of Third Generation Automotive Steel. Journal of Iron and Steel Research International 21:11, pages 1059-1064.
Crossref
Crossref
Chao Wang, Hua Ding, Jun Zhang & Huafang Di. (2014) Effect of Partial Replacement of Si with Al on the Microstructures and Mechanical Properties of 1000 MPa TRIP Steels. Journal of Materials Engineering and Performance 23:11, pages 3896-3906.
Crossref
Crossref
H. L. Yi. (2014) Review on δ-Transformation-Induced Plasticity (TRIP) Steels with Low Density: The Concept and Current Progress. JOM 66:9, pages 1759-1769.
Crossref
Crossref
M. Manna & M. Dutta. (2014) Improvement in galvanization and galvannealing characteristics of DP 590 steel by prior Cu or Cu–Sn flash coating. Surface and Coatings Technology 251, pages 29-37.
Crossref
Crossref
Daniel Krizan & Bruno C. De Cooman. (2014) Mechanical Properties of TRIP Steel Microalloyed with Ti. Metallurgical and Materials Transactions A 45:8, pages 3481-3492.
Crossref
Crossref
Yang Zhao, Qiangjun Yan, Liqing Chen & Xiaoyun Yuan. (2014) Effect of Isothermal Temperature on Microstructure and Mechanical Properties of High Al–Low Si TRIP Steel. Acta Metallurgica Sinica (English Letters) 27:3, pages 389-394.
Crossref
Crossref
Fayez Alharbi, Azdiar A. Gazder, Andrii Kostryzhev, Bruno C. De Cooman & Elena V. Pereloma. (2014) The effect of processing parameters on the microstructure and mechanical properties of low-Si transformation-induced plasticity steels. Journal of Materials Science 49:7, pages 2960-2974.
Crossref
Crossref
She Ming Jiang, Shi Jie Feng, Zhen Hua Li & Qi Fu Zhang. (2014) Influence of Oxide Morphologies on the Galvanizability of the Third Generation Automotive Steel. Advanced Materials Research 887-888, pages 233-239.
Crossref
Crossref
Ko-Chun Lin & Chao-Sung Lin. (2014) Effect of Silicon in Dual Phase Steel on the Alloy Reaction in Continuous Hot-dip Galvanizing and Galvannealing. ISIJ International 54:10, pages 2380-2384.
Crossref
Crossref
Tanmay Bhattacharyya, Shiv Brat Singh, Sandip Bhattacharyya, Ranjit Kumar Ray, Wolfgang Bleck & Debashish Bhattacharjee. (2013) An assessment on coatability of transformation induced plasticity (TRIP)-aided steel. Surface and Coatings Technology 235, pages 226-234.
Crossref
Crossref
Kuang-Kuo Wang, Chiung-Wen Hsu, Liuwen Chang, Dershin Gan & Kuo-Cheng Yang. (2013) Role of Al in Zn bath on the formation of the inhibition layer during hot-dip galvanizing for a 1.2Si–1.5Mn transformation-induced plasticity steel. Applied Surface Science 285, pages 458-468.
Crossref
Crossref
Ko-Chun Lin, Peng-Wei Chu, Chao-Sung Lin & Hon-Bor Chen. (2013) Galvanizing and Galvannealing Behavior of CMnSiCr Dual-Phase Steels. Metallurgical and Materials Transactions A 44:6, pages 2690-2698.
Crossref
Crossref
Z.H. Cai, H. Ding, X. Xue & Q.B. Xin. (2013) Microstructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel. Materials Science and Engineering: A 560, pages 388-395.
Crossref
Crossref
Anirban Chakraborty, Joseph R. McDermid, Ranganathan Kavitha, Benoit Voyzelle, Elhachmi Essadiqi & Frank E. Goodwin. (2012) The Development of a Processing Window for the Continuous Galvanizing of a Mn-Cr-Si Martensitic Steel. steel research international 83:11, pages 1103-1117.
Crossref
Crossref
Jae-Bok Seol, Dierk Raabe, Puck-Pa Choi, Yung-Rok Im & Chan-Gyung Park. (2012) Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical properties of high-carbon bainitic–austenitic TRIP steels. Acta Materialia 60:17, pages 6183-6199.
Crossref
Crossref
E. M. Bellhouse & J. R. McDermid. (2012) Selective Oxidation and Reactive Wetting During Hot-Dip Galvanizing of a 1.0 pct Al-0.5 pct Si TRIP-Assisted Steel. Metallurgical and Materials Transactions A 43:7, pages 2426-2441.
Crossref
Crossref
Huachu Liu, Fang Li, Wen Shi, Srinivasan Swaminathan, Yanlin He, Michael Rohwerder & Lin Li. (2012) Challenges in hot-dip galvanizing of high strength dual phase steel: Surface selective oxidation and mechanical property degradation. Surface and Coatings Technology 206:16, pages 3428-3436.
Crossref
Crossref
G.M. Song, T. Vystavel, N. van der Pers, J.Th.M. De Hosson & W.G. Sloof. (2012) Relation between microstructure and adhesion of hot dip galvanized zinc coatings on dual phase steel. Acta Materialia 60:6-7, pages 2973-2981.
Crossref
Crossref
J. R. McDermid, H. S. Zurob & Y. Bian. (2011) Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments. Metallurgical and Materials Transactions A 42:12, pages 3627-3637.
Crossref
Crossref
Fang Li, Huachu Liu, Wen Shi & Lin Li. (2011) Thermodynamic consideration on selective surface oxidation of high strength steels prior to hot-dip galvanizing. Journal of Coatings Technology and Research 8:5, pages 639-647.
Crossref
Crossref
Tanmay Bhattacharyya, Shiv Brat Singh, Sourav Das, Arunansu Haldar & Debashish Bhattacharjee. (2011) Development and characterisation of C–Mn–Al–Si–Nb TRIP aided steel. Materials Science and Engineering: A 528:6, pages 2394-2400.
Crossref
Crossref
Huachu Liu, Fang Li, Wen Shi, Rendong Liu & Lin Li. (2011) Characterization of hot-dip galvanized coating on dual phase steels. Surface and Coatings Technology 205:11, pages 3535-3539.
Crossref
Crossref
Huachu Liu, Wen Shi, Yanlin He & Lin Li. (2010) The effect of alloy elements on selective oxidation and galvanizability of TRIP-aided steel. Surface and Interface Analysis 42:12-13, pages 1685-1689.
Crossref
Crossref
Xiao Ying Hou, Yun Bo Xu & Di Wu. (2010) Microstructure and Mechanical Properties of High Strength Hot-Rolled TRIP Steel Containing Vanadium. Advanced Materials Research 160-162, pages 324-329.
Crossref
Crossref
E.M. Bellhouse & J.R. McDermid. (2010) Selective Oxidation and Reactive Wetting of 1.0 Pct Si-0.5 Pct Al and 1.5 Pct Si TRIP-Assisted Steels. Metallurgical and Materials Transactions A 41:6, pages 1539-1553.
Crossref
Crossref
Yun Peng, Yan Chang Qi, Chang Hong He, Zhi Ling Tian & Hong Jun Xiao. (2010) Microstructure and its Formation Mechanism of Weld Metal of Al-Bearing TRIP Steel. Materials Science Forum 638-642, pages 3591-3596.
Crossref
Crossref
Huachu Liu, Yanlin He & Lin Li. (2009) Application of thermodynamics and Wagner model on two problems in continuous hot-dip galvanizing. Applied Surface Science 256:5, pages 1399-1403.
Crossref
Crossref
Manuel Gomez, C. Isaac Garcia, Dennis M. Haezebrouck & Anthony J. Deardo. (2009) Design of Composition in (Al/Si)-alloyed TRIP Steels. ISIJ International 49:2, pages 302-311.
Crossref
Crossref
T. Van De Putte, D. Loison, J. Penning & S. Claessens. (2008) Selective Oxidation of a CMnSi Steel during Heating to 1000 °C: Reversible SiO2 Oxidation. Metallurgical and Materials Transactions A 39:12, pages 2875-2884.
Crossref
Crossref
E. De Moor, S. Lacroix, A.J. Clarke, J. Penning & J.G. Speer. (2008) Effect of Retained Austenite Stabilized via Quench and Partitioning on the Strain Hardening of Martensitic Steels. Metallurgical and Materials Transactions A 39:11, pages 2586-2595.
Crossref
Crossref
Mohamed Soliman & Heinz Palkowski. (2008) On Factors Affecting the Phase Transformation and Mechanical Properties of Cold-Rolled Transformation-Induced-Plasticity–Aided Steel. Metallurgical and Materials Transactions A 39:10, pages 2513-2527.
Crossref
Crossref
Sascha Frenznick, Martin Stratmann & Michael Rohwerder. (2008) A new advanced experimental setup for in-depth study of the interfacial reaction during reactive wetting. Review of Scientific Instruments 79:4.
Crossref
Crossref
Mingsheng Xia, Zhilin Tian, Lin Zhao & Y. Norman Zhou. (2008) Metallurgical and Mechanical Properties of Fusion Zones of TRIP Steels in Laser Welding. ISIJ International 48:4, pages 483-488.
Crossref
Crossref
G.M. Song, Willem G. Sloof, T. Vystavel & Jeff T.M. de Hosson. (2007) Interface Microstructure and Adhesion of Zinc Coatings on TRIP Steels. Materials Science Forum 539-543, pages 1104-1109.
Crossref
Crossref
Nikolaos D. Alexopoulos. (2006) Low-alloy TRIP Steels: Evaluation of the Mechanical Performance with regard to Material Design Requirements in the Automotive Industry. steel research international 77:2, pages 129-138.
Crossref
Crossref
H.K.D.H. Bhadeshia & Sir Robert Honeycombe. 2006. Steels. Steels
209
234
.
L. Samek, E. De Moor, J. Penning & B. C. De Cooman. (2006) Influence of alloying elements on the kinetics of strain-induced martensitic nucleation in low-alloy, multiphase high-strength steels. Metallurgical and Materials Transactions A 37:1, pages 109-124.
Crossref
Crossref
B.C. De Cooman. (2004) Structure–properties relationship in TRIP steels containing carbide-free bainite. Current Opinion in Solid State and Materials Science 8:3-4, pages 285-303.
Crossref
Crossref