Citations (65)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
S. D. Liu, Q. M. Zhong, X. M. Zhang & Y. L. Deng. (2010) TTP diagrams for aluminium alloy 1933. Materials Science and Technology 26:8, pages 1012-1014.
Read now
Read now
J. Yan & A. P. Reynolds. (2009) Effect of initial base metal temper on mechanical properties in AA7050 friction stir welds. Science and Technology of Welding and Joining 14:4, pages 282-287.
Read now
Read now
S. D. Liu, X. M. Zhang, J. H. You, Z. B. Huang & Z. P. Zhou. (2008) TTP diagrams for 7055 aluminium alloy. Materials Science and Technology 24:12, pages 1419-1421.
Read now
Read now
Articles from other publishers (62)
Khaled Adam & David Field. (2023) Modeling the Heterogeneity Spatial Distribution of Coarse Second Phase Particle on Recrystallization Behavior in 7XXX Al Alloy. Materials Science Forum 1103, pages 13-25.
Crossref
Crossref
Yong Li, Ting Hou, Xia Huang, Yuan Gao, Yuansong Zeng & Dongsheng Li. (2023) Constitutive modelling of coupled creep deformation and age hardening behavior of aluminum alloys under various thermal and mechanical loadings. Journal of Materials Research and Technology 25, pages 333-353.
Crossref
Crossref
Wisam Naji Hasan & Mohammed Naji Al-Aaraji. (2023) Experimental Investigation of Application Taguchi Method to Optimize Heat Treatment Parameters Using Nanofluids of AISI 52100 Steel. Materials Science Forum 1083, pages 51-60.
Crossref
Crossref
Sai-heng Hou, Jian Feng, Song Chen, Fan Zhang & Da-quan Li. (2022) Effect of Ti, Sc and Zr additions on microstructure and mechanical properties of rheo-diecasting Al-6Zn-2Mg-2Cu alloys. China Foundry 20:2, pages 125-133.
Crossref
Crossref
Saiheng Hou, Jian Feng, Song Chen, Fan Zhang & Daquan Li. (2022) Effects of Zn Contents on Microstructure and Mechanical Properties of Semisolid Rheo-Diecasting Al-xZn-2Mg-1.5Cu Alloys. Materials 15:8, pages 2873.
Crossref
Crossref
Gagandeep Singh, Hartaj Singh, Kapil Singh, Sachit Vardhan & Sanjay Mohan. (2022) Mechanical characterizations of the fabricated AA 6061 based composites reinforced with B4C particulates. Materials Today: Proceedings 60, pages 1086-1089.
Crossref
Crossref
Ke-zhun He, Qun Li, Sheng-dan Liu, Xin-ming Zhang & Ke-chao Zhou. (2021) Influence of pre-stretching on quench sensitive effect of high-strength Al−Zn−Mg−Cu-Zr alloy sheet预拉伸对高强 Al−Zn−Mg−Cu−Zr 合金板材淬火敏感性效应的影响. Journal of Central South University 28:9, pages 2660-2669.
Crossref
Crossref
Xiaoya Wang, Jiantang Jiang, Guoai Li, Wenzhu Shao & Liang Zhen. (2021) Precipitation during Quenching in 2A97 Aluminum Alloy and the Influences from Grain Structure. Materials 14:11, pages 2802.
Crossref
Crossref
Alistair Garner, Ryan Euesden, Yichao Yao, Yasser Aboura, Huan Zhao, Jack Donoghue, Michele Curioni, Baptiste Gault, Pratheek Shanthraj, Zak Barrett, Christian Engel, Tim L. Burnett & Phil B. Prangnell. (2021) Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys. Acta Materialia 202, pages 190-210.
Crossref
Crossref
Feng-Bin Guo, Bao-Hong Zhu, Long-Bing Jin, Guo-Jun Wang, Hong-Wei Yan, Zhi-Hui Li, Yong-An Zhang & Bai-Qing Xiong. (2017) Microstructure and mechanical properties of 7A56 aluminum alloy after solution treatment. Rare Metals 40:1, pages 168-175.
Crossref
Crossref
Reza Ghiaasiaan & Sumanth Shankar. (2020) Microstructure, Intermetallic Phases, and Fractography of the Cast Al-5.8Zn-2.2Mg-2.5Cu Alloy by Controlled Diffusion Solidification. Metallurgical and Materials Transactions A 51:9, pages 4711-4726.
Crossref
Crossref
Elisabeth Schwarzenböck, Eric Ollivier, Alistair Garner, Alex Cassell, Theo Hack, Zak Barrett, Christian Engel, Tim L. Burnett, N.J. Henry Holroyd, Joseph D. Robson & Phil B. Prangnell. (2020) Environmental cracking performance of new generation thick plate 7000-T7x series alloys in humid air. Corrosion Science 171, pages 108701.
Crossref
Crossref
YingHao Peng, ChongYu Liu, ZongYi Ma, HongJie Jiang & HongFeng Huang. (2020) Hardness, quench sensitivity, and electrical conductivity of 7xxx Al alloys with high Zn concentrations. Science China Technological Sciences 63:6, pages 953-959.
Crossref
Crossref
Hong Wei Liu, Kai Wen, Xi Wu Li, Zhi Hui Li, Li Zhen Yan, Hong Wei Yan, Yong An Zhang & Bai Qing Xiong. (2020) Effect of Solution Treatment on Second Phase Dissolution for an Al-9.2Zn-2.0Mg-1.9Cu Alloy. Materials Science Forum 993, pages 321-326.
Crossref
Crossref
Bjørn Håkon Frodal, Emil Christiansen, Ole Runar Myhr & Odd Sture Hopperstad. (2020) The role of quench rate on the plastic flow and fracture of three aluminium alloys with different grain structure and texture. International Journal of Engineering Science 150, pages 103257.
Crossref
Crossref
Tom Petit, Jacques Besson, Claire Ritter, Kimberly Colas, Lukas Helfen & Thilo F. Morgeneyer. (2019) Effect of hardening on toughness captured by stress-based damage nucleation in 6061 aluminum alloy. Acta Materialia 180, pages 349-365.
Crossref
Crossref
S. Reza Ghiaasiaan, Babak Shalchi Amirkhiz & Sumanth Shankar. (2019) High-Resolution Electron Microscopy and Kinetic Studies of Precipitation Hardening Reactions in Cast Al-5.8Zn-2.2Mg-2.5Cu. Journal of Materials Engineering and Performance 28:8, pages 4630-4646.
Crossref
Crossref
J.J. Bhattacharyya, B. Bittmann & S.R. Agnew. (2019) The effect of precipitate-induced backstresses on plastic anisotropy: Demonstrated by modeling the behavior of aluminum alloy, 7085. International Journal of Plasticity 117, pages 3-20.
Crossref
Crossref
Li Wan, Yun-Lai Deng, Ling-Ying Ye & Yong Zhang. (2019) The natural ageing effect on pre-ageing kinetics of Al-Zn-Mg alloy. Journal of Alloys and Compounds 776, pages 469-474.
Crossref
Crossref
Huaqiang Lin, Yulong Wu & Shengdan Liu. (2018) Impact of initial temper of base metal on microstructure and mechanical properties of friction stir welded AA 7055 alloy. Materials Characterization 146, pages 159-168.
Crossref
Crossref
Lei KANG, Gang ZHAO, Guang-dong WANG, Kun LIU & Ni TIAN. (2018) Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy. Transactions of Nonferrous Metals Society of China 28:11, pages 2162-2172.
Crossref
Crossref
Reza Ghiaasiaan & Sumanth Shankar. (2018) Structure-property models in Al-Zn-Mg-Cu alloys: A critical experimental assessment of shape castings. Materials Science and Engineering: A 733, pages 235-245.
Crossref
Crossref
Feng Zhang, Ting-biao Guo, Qi Li, Chen Wang, Wan-wu Ding & Qing-lin Li. (2018) Effects of minor Y, Zr and Er addition on microstructure and properties of Al-5Cu-0.4Mn alloy. China Foundry 14:6, pages 461-468.
Crossref
Crossref
Noelle Easter C. Co & James T. Burns. (2017) Effects of macro-scale corrosion damage feature on fatigue crack initiation and fatigue behavior. International Journal of Fatigue 103, pages 234-247.
Crossref
Crossref
P.K. Jena, K. Sivakumar, R.K. Mandal & A.K. Singh. (2017) Influence of Heat Treatment on the Ballistic Behavior of AA-7017 Alloy Plate against 7.62 Deformable Projectiles. Procedia Engineering 173, pages 214-221.
Crossref
Crossref
J. B. Kim, J. H. Kim & C. Y. Kang. (2016) Effect of Hot Forging on Microstructural Evolution and Impact Toughness in Ultra-high Carbon Low Alloy Steel. Journal of Materials Engineering and Performance 25:12, pages 5225-5230.
Crossref
Crossref
Baohua Nie, Peiying Liu & Tietao Zhou. (2016) Effect of compositions on the quenching sensitivity of 7050 and 7085 alloys. Materials Science and Engineering: A 667, pages 106-114.
Crossref
Crossref
Jin Zhang, Yu Wang, Yunlai Deng & Xinming Zhang. (2016) Effect of deformation degree on the creep age forming of 7475 aluminum alloy: The feasibility of the extended deformation range. Materials Science and Engineering: A 664, pages 126-134.
Crossref
Crossref
W.X. Shu, L.G. Hou, C. Zhang, F. Zhang, J.C. Liu, J.T. Liu, L.Z. Zhuang & J.S. Zhang. (2016) Tailored Mg and Cu contents affecting the microstructures and mechanical properties of high-strength Al–Zn–Mg–Cu alloys. Materials Science and Engineering: A 657, pages 269-283.
Crossref
Crossref
James T. Burns & Julien Boselli. (2016) Effect of plate thickness on the environmental fatigue crack growth behavior of AA7085-T7451. International Journal of Fatigue 83, pages 253-268.
Crossref
Crossref
Guo-zheng Quan, Tong Wang, Yong-le Li, Zong-yang Zhan & Yu-feng Xia. (2016) Artificial Neural Network Modeling to Evaluate the Dynamic Flow Stress of 7050 Aluminum Alloy. Journal of Materials Engineering and Performance 25:2, pages 553-564.
Crossref
Crossref
Lianghua Lin, Zhiyi Liu, Song Bai, Puyou Ying & Xiaohu Wang. (2015) Effects of germanium on quench sensitivity in Al–Zn–Mg–Zr alloy. Materials & Design 86, pages 679-685.
Crossref
Crossref
S.P. Knight, K. Pohl, N.J.H. Holroyd, N. Birbilis, P.A. Rometsch, B.C. Muddle, R. Goswami & S.P. Lynch. (2015) Some effects of alloy composition on stress corrosion cracking in Al–Zn–Mg–Cu alloys. Corrosion Science 98, pages 50-62.
Crossref
Crossref
N. Chobaut, D. Carron, S. Arsène, P. Schloth & J.-M. Drezet. (2015) Quench induced residual stress prediction in heat treatable 7xxx aluminium alloy thick plates using Gleeble interrupted quench tests. Journal of Materials Processing Technology 222, pages 373-380.
Crossref
Crossref
Ke-da JIANG, Long CHEN, Yun-ya ZHANG & Yun-lai DENG. (2014) Influence of sub-grain boundaries on quenching process of an Al-Zn-Mg-Cu alloy. Transactions of Nonferrous Metals Society of China 24:7, pages 2117-2121.
Crossref
Crossref
Jian Zhang, Qiang Guo Luo, Qiang Shen & Lian Meng Zhang. (2014) Diffusion Mechanism and Kinetics of Diffusion Bonded Mg/Ni/Al Joint. Key Engineering Materials 616, pages 286-290.
Crossref
Crossref
Jin Zhang, Yunlai Deng, Wang Yang, Shanshan Hu & Xinming Zhang. (2014) Design of the multi-stage quenching process for 7050 aluminum alloy. Materials & Design (1980-2015) 56, pages 334-344.
Crossref
Crossref
Xiyong Wang, Xuefeng Liu & Jianxin Xie. (2014) Mechanism of surface texture evolution in pure copper strips subjected to double rolling. Progress in Natural Science: Materials International 24:1, pages 75-82.
Crossref
Crossref
Reza Ghiaasiaan, Xiaochun Zeng & Sumanth Shankar. (2014) Controlled Diffusion Solidification (CDS) of Al-Zn-Mg-Cu (7050): Microstructure, heat treatment and mechanical properties. Materials Science and Engineering: A 594, pages 260-277.
Crossref
Crossref
Y. Zhang, B. Milkereit, O. Kessler, C. Schick & P.A. Rometsch. (2014) Development of continuous cooling precipitation diagrams for aluminium alloys AA7150 and AA7020. Journal of Alloys and Compounds 584, pages 581-589.
Crossref
Crossref
A. Salas-Zamarripa, C. Pinna, M. W. Brown, M. P. Guerrero-Mata, M. Castillo Morales & D. F. Ledezma-Ram?rez. 2016. Fatigue of Materials III. Fatigue of Materials III
239
250
.
J-M. Drezet, N. Chobaut, P. Schloth & H. van Swygenhoven. 2013. EPD Congress 2013. EPD Congress 2013
63
72
.
Yu-hua ZHANG, Shu-cai YANG & Hong-zhi JI. (2012) Microstructure evolution in cooling process of Al?Zn?Mg?Cu alloy and kinetics description. Transactions of Nonferrous Metals Society of China 22:9, pages 2087-2091.
Crossref
Crossref
Pei-yue LI, Bai-qing XIONG, Yong-an ZHANG & Zhi-hui LI. (2012) Temperature variation and solution treatment of high strength AA7050. Transactions of Nonferrous Metals Society of China 22:3, pages 546-554.
Crossref
Crossref
Lukas Helfen, Thilo F. Morgeneyer, Feng Xu, Mark N. Mavrogordato, Ian Sinclair, Burkhard Schillinger & Tilo Baumbach. (2012) Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens. International Journal of Materials Research 103:2, pages 170-173.
Crossref
Crossref
Pei-yue LI, Bai-qing XIONG, Yong-an ZHANG, Zhi-hui LI, Bao-hong ZHU, Feng WANG & Hong-wei LIU. (2012) Quench sensitivity and microstructure character of high strength AA7050. Transactions of Nonferrous Metals Society of China 22:2, pages 268-274.
Crossref
Crossref
Chandan Mondal, Bidyapati Mishra, Pradipta K. Jena, K. Siva Kumar & T.B. Bhat. (2011) Effect of heat treatment on the behavior of an AA7055 aluminum alloy during ballistic impact. International Journal of Impact Engineering 38:8-9, pages 745-754.
Crossref
Crossref
Chin Chun Chang, Ji Gang Yang, Ling Qi & Chang Pin Chou. (2010) Optimization of Heat Treatment Parameters with the Taguchi Method for the A7050 Aluminum Alloy. Advanced Materials Research 139-141, pages 157-162.
Crossref
Crossref
Ida Westermann, Odd Sture Hopperstad, Knut Marthinsen & Bjørn Holmedal. (2010) Work-hardening behaviour of a heat-treatable AA7108 aluminium alloy deformed to intermediate strains by compression. Journal of Materials Science 45:19, pages 5323-5331.
Crossref
Crossref
Shengdan Liu, Wenjun Liu, Yong Zhang, Xinming Zhang & Yunlai Deng. (2010) Effect of microstructure on the quench sensitivity of AlZnMgCu alloys. Journal of Alloys and Compounds 507:1, pages 53-61.
Crossref
Crossref
Ralph Shuey & Murat Tiryakioglu. 2010. Quenching Theory and Technology, Second Edition. Quenching Theory and Technology, Second Edition.
Shengdan Liu, Qimin Zhong, Yong Zhang, Wenjun Liu, Xinming Zhang & Yunlai Deng. (2010) Investigation of quench sensitivity of high strength Al–Zn–Mg–Cu alloys by time–temperature-properties diagrams. Materials & Design 31:6, pages 3116-3120.
Crossref
Crossref
Sheng-dan LIU, Yong ZHANG, Wen-jun LIU, Yun-lai DENG & Xin-ming ZHANG. (2010) Effect of step-quenching on microstructure of aluminum alloy 7055. Transactions of Nonferrous Metals Society of China 20:1, pages 1-6.
Crossref
Crossref
V.M.J. Sharma, K. Sree Kumar, B. Nageswara Rao & S.D. Pathak. (2009) Studies on the Work-Hardening Behavior of AA2219 under Different Aging Treatments. Metallurgical and Materials Transactions A 40:13, pages 3186-3195.
Crossref
Crossref
Y. Chen, K.O. Pedersen, A.H. Clausen & O.S. Hopperstad. (2009) An experimental study on the dynamic fracture of extruded AA6xxx and AA7xxx aluminium alloys. Materials Science and Engineering: A 523:1-2, pages 253-262.
Crossref
Crossref
A. Deschamps, G. Texier, S. Ringeval & L. Delfaut-Durut. (2009) Influence of cooling rate on the precipitation microstructure in a medium strength Al–Zn–Mg alloy. Materials Science and Engineering: A 501:1-2, pages 133-139.
Crossref
Crossref
R.T. Shuey, F. Barlat, M.E. Karabin & D.J. Chakrabarti. (2009) Experimental and Analytical Investigations on Plane Strain Toughness for 7085 Aluminum Alloy. Metallurgical and Materials Transactions A 40:2, pages 365-376.
Crossref
Crossref
J. S. Robinson & D. A. Tanner. (2008) Reducing Residual Stress in 7050 Aluminum Alloy Die Forgings by Heat Treatment. Journal of Engineering Materials and Technology 130:3.
Crossref
Crossref
Jiang-hai You, Sheng-dan Liu, Xin-ming Zhang & Xiao-yan Zhang. (2008) Influence of quench transfer time on microstructure and mechanical properties of 7055 aluminum alloy. Journal of Central South University of Technology 15:2, pages 153-158.
Crossref
Crossref
S.D. Liu, X.M. Zhang, M.A. Chen & J.H. You. (2008) Influence of aging on quench sensitivity effect of 7055 aluminum alloy. Materials Characterization 59:1, pages 53-60.
Crossref
Crossref
Sheng-dan LIU, Xin-ming ZHANG, Ming-an CHEN, Jiang-hai YOU & Xiao-yan ZHANG. (2007) Effect of Zr content on quench sensitivity of AIZnMgCu alloys. Transactions of Nonferrous Metals Society of China 17:4, pages 787-792.
Crossref
Crossref
D. Steele, D. Evans, P. Nolan & D.J. Lloyd. (2007) Quantification of grain boundary precipitation and the influence of quench rate in 6XXX aluminum alloys. Materials Characterization 58:1, pages 40-45.
Crossref
Crossref