Citations (14)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
M. Altay & M. Baydogan. (2018) Effect of processing parameters on electropolishing of commercially pure Ti in an alcohol-based electrolyte. Transactions of the IMF 96:3, pages 163-168.
Read now
Read now
Articles from other publishers (13)
Rahul Davis, Abhishek Singh, Robson Bruno Dutra Pereira, Roberta Maia Sabino, Ketul Popat, Paulo Soares & Lincoln Cardoso Brandão. (2023) Collaborative Impact of Cryo-Treated Cutting Tool and Hybrid Milling Environment Towards Improved Sustainable Milling of ASTM F2063 Ni55.6Ti44.4 Alloy. International Journal of Precision Engineering and Manufacturing-Green Technology 10:6, pages 1485-1509.
Crossref
Crossref
Jacob Mingear, Bing Zhang, Alaa Elwany & Darren Hartl. (2023) Roughness Analysis of Powder-Bed Fused Nickel–Titanium Surfaces with Chemical Etching Enhancement by a Safe Aqueous Fluoride Solution. Shape Memory and Superelasticity.
Crossref
Crossref
Nicholas C. Ferreri, Daniel J. Savage & Marko Knezevic. (2020) Non-acid, alcohol-based electropolishing enables high-quality electron backscatter diffraction characterization of titanium and its alloys: Application to pure Ti and Ti-6Al-4V. Materials Characterization 166, pages 110406.
Crossref
Crossref
Zhenyu Zhang, Longxing Liao, Xinze Wang, Wenxiang Xie & Dongming Guo. (2020) Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy. Applied Surface Science 506, pages 144670.
Crossref
Crossref
Guijie Wang, Zhanqiang Liu, Jintao Niu, Weimin Huang & Baolin Wang. (2020) Effect of electrochemical polishing on surface quality of nickel-titanium shape memory alloy after milling. Journal of Materials Research and Technology 9:1, pages 253-262.
Crossref
Crossref
Monika Jenko, Matjaž Godec, Aleksandra Kocijan, Rebeka Rudolf, Drago Dolinar, Maja Ovsenik, Matevž Gorenšek, Rok Zaplotnik & Miran Mozetic. (2019) A new route to biocompatible Nitinol based on a rapid treatment with H2/O2 gaseous plasma. Applied Surface Science 473, pages 976-984.
Crossref
Crossref
Nataliia Sheiko, Patrick Kékicheff, Pascal Marie, Marc Schmutz, Leandro Jacomine & Fabienne Perrin-Schmitt. (2016) PEEK (polyether-ether-ketone)-coated nitinol wire: Film stability for biocompatibility applications. Applied Surface Science 389, pages 651-665.
Crossref
Crossref
Hyo Geun Nam, Chang Min Yoo, Seoung Min Baek, Han Ki Kim, Jae Hee Shin, Min Ho Hwang, Ga Eun Jo, Kyong Soo Kim, Jae Hwa Cho, Seung Hoon Lee, Ho Chul Kim, Chun Hak Lim, Hyuk Choi & Kyung Sun. (2015) Enhancement of Mechanical Properties and Testing of Nitinol Stents in Cerebral Aneurysm Simulation Models. Artificial Organs 39:12, pages E213-E226.
Crossref
Crossref
R. A. Surmenev, M. A. Ryabtseva, E. V. Shesterikov, V. F. Pichugin, T. Peitsch & M. Epple. (2010) The release of nickel from nickel–titanium (NiTi) is strongly reduced by a sub-micrometer thin layer of calcium phosphate deposited by rf-magnetron sputtering. Journal of Materials Science: Materials in Medicine 21:4, pages 1233-1239.
Crossref
Crossref
M.F. MAITZ. 2009. Shape Memory Alloys for Biomedical Applications. Shape Memory Alloys for Biomedical Applications
173
193
.
C. Heßing, J. Frenzel, M. Pohl & S. Shabalovskaya. (2008) Effect of martensitic transformation on the performance of coated NiTi surfaces. Materials Science and Engineering: A 486:1-2, pages 461-469.
Crossref
Crossref
A. Michiardi, C. Aparicio, J.A. Planell & F.J. Gil. (2005) New oxidation treatment of NiTi shape memory alloys to obtain Ni‐free surfaces and to improve biocompatibility. Journal of Biomedical Materials Research Part B: Applied Biomaterials 77B:2, pages 249-256.
Crossref
Crossref
A. Bhuyan, B. Gregory, H. Lei, Seow Yuen Yee & Y.B. Gianchandani. (2005) Pulse and DC Electropolishing of Stainless Steel for Stents and Other Devices. Pulse and DC Electropolishing of Stainless Steel for Stents and Other Devices.