Citations (50)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Supreet Singh & Manpreet Kaur. (2016) Solid particle erosion behaviour of NiCrFeSiBC/Cr3C2 composite coatings – Part II. Surface Engineering 32:7, pages 475-489.
Read now
Read now
T. Lolla, J. Siefert, S. S. Babu & D. Gandy. (2014) Delamination failures of Stellite hardfacing in power plants: a microstructural characterisation study. Science and Technology of Welding and Joining 19:6, pages 476-486.
Read now
Read now
T. I. Khan, G. Saha & L. B. Glenesk. (2010) Nanostructured composite coatings for oil sand’s applications. Surface Engineering 26:7, pages 540-545.
Read now
Read now
S. Harsha & D. K. Dwivedi. (2007) Microstructure, hardness and abrasive wear behaviour of flame sprayed Co based alloy coating. Surface Engineering 23:4, pages 261-266.
Read now
Read now
A. K. Yadav, N. Arora & D. K. Dwivedi. (2006) On microstructure, hardness and wear behaviour of flame sprayed Co base alloy coating deposited on mild steel. Surface Engineering 22:5, pages 331-336.
Read now
Read now
Articles from other publishers (45)
Maximilian Kiehl, Adriano Scheid, Karin Graf, Benedikt Ernst & Ulrich Tetzlaff. (2023)
Coaxial laser cladding of cobalt-base alloy Stellite
TM
6 on gray cast iron/investigations on friction, wear versus commercial brake pad, and corrosion characteristics
. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 237:14, pages 3285-3303.
Crossref
Crossref
S. Haribabu, C. Sudha, C. P. Paul, V. Srihari, Alphy George, A. Dasgupta & K. S. Bindra. (2023) Phase Selection and Microstructure Evolution in Laser Additive Manufactured Ni-Based Hardfacing Alloy Bush. Metallurgical and Materials Transactions A.
Crossref
Crossref
Sankarasabapathi Sankarapandian, Nachimuthu Pravin Kumar, Arasappan Rajesh Kannan & Nallathambi Siva Shanmugam. (2023) Microstructure, Mechanical Properties, and Corrosion Behavior of Co‐Based Stellite 6 Multilayer Overlays Deposited on ASTM A36 Steel by Gas Metal Arc Welding Process. steel research international 94:8.
Crossref
Crossref
Omar M. Alsadoon & Ahmad A. Sorour. (2022) Corrosion of Stellite-6 Overlay Cladding on 304L Stainless Steel in Nitric Acid. Journal of Failure Analysis and Prevention 22:6, pages 2235-2243.
Crossref
Crossref
Arifur Rahman, Mohammad Asaduzzaman Chowdhury, Nayem Hossain, Masud Rana & Md. Jonaidul Alam. (2022) A review of the tribological behavior of electrodeposited cobalt (Co) based composite coatings. Composites Part C: Open Access 9, pages 100307.
Crossref
Crossref
Pramod Kumar, Amar Nath Sinha, A Saravanan, M Murugan & Chetan Kumar Hirwani. (2021) Study of microstructure and mechanical properties of NiTi wire cladding on super austenitic stainless steel 904L by TIG cladding process. Sādhanā 46:2.
Crossref
Crossref
Yue Hou, Hai Yan Chen, Li Fan, Yu Rong Xu, Qian Cheng & Li Hua Dong. (2020) Corrosion Behavior of Cobalt Alloy Coating in NaCl Solution. Materials Science Forum 993, pages 1086-1094.
Crossref
Crossref
Taixu Xu, Chongyi Wei, Xiao Han, Jihui Liu, Zhijun He & Nan Lü. (2020) Effect of Carbon Content and Elements Mo and V on the Microstructure and Properties of Stainless Steel Powder Surfacing Layer. Coatings 10:4, pages 371.
Crossref
Crossref
Y. P. Ding, R. Liu, L. Wang, J. H. Li & J. H. Yao. (2020) Corrosion and Wear Performance of Stellite Alloy Hardfacing Prepared via Laser Cladding. Protection of Metals and Physical Chemistry of Surfaces 56:2, pages 392-404.
Crossref
Crossref
L. Baiamonte, M. Tului, C. Bartuli, D. Marini, A. Marino, F. Menchetti, R. Pileggi, G. Pulci & F. Marra. (2019) Tribological and high-temperature mechanical characterization of cold sprayed and PTA-deposited Stellite coatings. Surface and Coatings Technology.
Crossref
Crossref
S. Natarajan, E. Edward Anand, K.S. Akhilesh, Ananya Rajagopal & Preeti P. Nambiar. (2016) Effect of graphite addition on the microstructure, hardness and abrasive wear behavior of plasma sprayed NiCrBSi coatings. Materials Chemistry and Physics 175, pages 100-106.
Crossref
Crossref
Olena V. Berezshnaya, Eduard P. Gribkov & Valeriy D. Kuznetsov. (2016) Investigation of Thermostressed State of Coating Formation at Electric Contact Surfacing of “Shaft” Type Parts. Advances in Materials Science and Engineering 2016, pages 1-14.
Crossref
Crossref
Weiqiang Zhang, Zhimin Zhong & Shaoguang Kang. (2015) Microstructures and mechanical properties of a martensitic steel welded with flux-cored wires. International Journal of Coal Science & Technology 2:3, pages 254-260.
Crossref
Crossref
Shun Lu, Jie Zhou & Jiansheng Zhang. (2014) Optimization of welding thickness on casting-steel surface for production of forging die. The International Journal of Advanced Manufacturing Technology 76:5-8, pages 1411-1419.
Crossref
Crossref
Satpal Sharma. (2014) Parametric study of abrasive wear of Co–CrC based flame sprayed coatings by Response Surface Methodology. Tribology International 75, pages 39-50.
Crossref
Crossref
R. Ahmed, A. Ashraf, M. Elameen, N.H. Faisal, A.M. El-Sherik, Y.O. Elakwah & M.F.A. Goosen. (2014) Single asperity nanoscratch behaviour of HIPed and cast Stellite 6 alloys. Wear 312:1-2, pages 70-82.
Crossref
Crossref
M. Balakrishnan, V. Balasubramanian & G. Madhusudhan Reddy. (2013) Effect of Hardfacing Consumables on Ballistic Performance of Q&T Steel Joints. Defence Technology 9:4, pages 249-258.
Crossref
Crossref
F. Rosalbino & G. Scavino. (2013) Corrosion behaviour assessment of cast and HIPed Stellite 6 alloy in a chloride-containing environment. Electrochimica Acta 111, pages 656-662.
Crossref
Crossref
N. Cinca, E. López, S. Dosta & J.M. Guilemany. (2013) Study of stellite-6 deposition by cold gas spraying. Surface and Coatings Technology 232, pages 891-898.
Crossref
Crossref
Wenhua Du, Cong Du, Huachang Wang, Hongfu Wang & Junyuan Wang. (2012) Carbide coating preparation of hot forging die by plasma processing. Journal of Wuhan University of Technology-Mater. Sci. Ed. 27:6, pages 1110-1114.
Crossref
Crossref
A. Mateen & T.I. Khan. (2012) Abrasive Wear Mechanism in Near-Nano and Microstructured WC-Cobalt Coatings. Applied Mechanics and Materials 229-231, pages 678-683.
Crossref
Crossref
Satpal Sharma. (2012) Abrasive Wear Study of Rare Earth Modified Coatings by Statistical Method. Journal of Thermal Spray Technology 21:5, pages 773-781.
Crossref
Crossref
C.S. Ramachandran, V. Balasubramanian, P.V. Ananthapadmanabhan & V. Viswabaskaran. (2012) Understanding the dry sliding wear behaviour of atmospheric plasma-sprayed rare earth oxide coatings. Materials & Design 39, pages 234-252.
Crossref
Crossref
Régis Henrique Gonçalves e Silva & Jair Carlos Dutra. (2012) Processo PTA-P - Uma revisão da literatura como base para inovações: parte 2 de 2: comportamento térmico e cinemático do pó, parâmetros e consumíveis do processo. Soldagem & Inspeção 17:2, pages 173-183.
Crossref
Crossref
T. Liyanage, G. Fisher & A.P. Gerlich. (2010) Influence of alloy chemistry on microstructure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding (PTAW). Surface and Coatings Technology 205:3, pages 759-765.
Crossref
Crossref
D.R.G. Achar, M. Kamaraj & C. S. Ganesh Bavisetty. (2010) Effect of Boron Carbide Addition on Wear Behaviour of Cobalt Based Hardfacings by Plasma Transferred Arc Process. Materials Science Forum 638-642, pages 3745-3750.
Crossref
Crossref
C S Ramachandran, V Balasubramanian & R Varahamoorthy. (2009) Comparative evaluation of dry sliding wear behaviour of plasma transferred arc hardfaced surfaces by the pin-on-roller method. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:1, pages 91-106.
Crossref
Crossref
S P Sharma, D K Dwivedi & P K Jain. (2009) Study of mechanical and metallurgical characteristics of flame sprayed NiCrBSi as-sprayed and continuous compacted coating. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:1, pages 107-114.
Crossref
Crossref
A. Neville & U. Malayoglu. 2010. Shreir's Corrosion. Shreir's Corrosion
1916
1936
.
S.P. Sharma, D.K. Dwivedi & P.K. Jain. (2009) Effect of La2O3 addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatings. Wear 267:5-8, pages 853-859.
Crossref
Crossref
J.F. Flores, A. Neville, N. Kapur & A. Gnanavelu. (2009) An experimental study of the erosion–corrosion behavior of plasma transferred arc MMCs. Wear 267:1-4, pages 213-222.
Crossref
Crossref
H. Yu, R. Ahmed, H. de Villiers Lovelock & S. Davies. (2009) Influence of Manufacturing Process and Alloying Element Content on the Tribomechanical Properties of Cobalt-Based Alloys. Journal of Tribology 131:1.
Crossref
Crossref
S P Sharma, D K Dwivedi & P K Jain. (2008)
Effect of CeO
2
addition on the microstructure, hardness, and abrasive wear behaviour of flame-sprayed Ni-based coatings
. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 222:7, pages 925-933.
Crossref
Crossref
S. Harsha, D. K. Dwivedi & A. Agarwal. (2007) Influence of CrC addition in Ni-Cr-Si-B flame sprayed coatings on microstructure, microhardness and wear behaviour. The International Journal of Advanced Manufacturing Technology 38:1-2, pages 93-101.
Crossref
Crossref
Serkan Ozel, Bulent Kurt, Ilyas Somunkiran & Nuri Orhan. (2008) Microstructural characteristic of NiTi coating on stainless steel by plasma transferred arc process. Surface and Coatings Technology 202:15, pages 3633-3637.
Crossref
Crossref
Yao Hui Lv, Bin Shi Xu, Yong Hua Xiang, Dan Xia & Cun Long Liu. (2008) Plasma Transferred Arc Powder Surfacing Technology of Thrust Face. Key Engineering Materials 373-374, pages 43-46.
Crossref
Crossref
S. Harsha, D.K. Dwivedi & A. Agarwal. (2007) Performance of Flame Sprayed Ni-WC Coating under Abrasive Wear Conditions. Journal of Materials Engineering and Performance 17:1, pages 104-110.
Crossref
Crossref
Evagelos K. Athanassiou, Robert N. Grass, Neil Osterwalder & Wendelin J. Stark. (2007) Preparation of Homogeneous, Bulk Nanocrystalline Ni/Mo Alloys with Tripled Vickers Hardness Using Flame-Made Metal Nanoparticles. Chemistry of Materials 19:20, pages 4847-4854.
Crossref
Crossref
H. Yu, R. Ahmed & H. de Villiers Lovelock. (2007) A Comparison of the Tribo-Mechanical Properties of a Wear Resistant Cobalt-Based Alloy Produced by Different Manufacturing Processes. Journal of Tribology 129:3, pages 586-594.
Crossref
Crossref
S. Harsha, D.K. Dwivedi & A. Agrawal. (2007) Influence of WC addition in Co–Cr–W–Ni–C flame sprayed coatings on microstructure, microhardness and wear behaviour. Surface and Coatings Technology 201:12, pages 5766-5775.
Crossref
Crossref
Q.Y. Hou, Y.Z. He, Q.A. Zhang & J.S. Gao. (2007) Influence of molybdenum on the microstructure and wear resistance of nickel-based alloy coating obtained by plasma transferred arc process. Materials & Design 28:6, pages 1982-1987.
Crossref
Crossref
Sudhir Harsha, Dheerendra Kumar Dwivedi & Ajai Agrawal. (2006) Investigations on the Abrasive Wear Behaviour of Flame Sprayed Ni–Cr–Co–Si Alloy Coating Deposited on Mild Steel Substrate. ISIJ International 46:10, pages 1473-1478.
Crossref
Crossref
U. Malayoglu, A. Neville & H. Lovelock. (2005) Assessing the kinetics and mechanisms of corrosion of cast and HIPed Stellite 6 in aqueous saline environments. Corrosion Science 47:8, pages 1911-1931.
Crossref
Crossref
Q.Y. Hou, J.S. Gao & F. Zhou. (2005) Microstructure and wear characteristics of cobalt-based alloy deposited by plasma transferred arc weld surfacing. Surface and Coatings Technology 194:2-3, pages 238-243.
Crossref
Crossref
U. Malayoglu & A. Neville. (2003) Comparing the performance of HIPed and Cast Stellite 6 alloy in liquid?solid slurries. Wear 255:1-6, pages 181-194.
Crossref
Crossref