Soyoung Kim, Hojun Oh, Jung Gi Kim & Sangshik Kim. (2021) Effect of Annealing and Crack Orientation on Fatigue Crack Propagation of Ti64 Alloy Fabricated by Direct Energy Deposition Process. Metals and Materials International 28:1, pages 205-215.
Crossref

R. Sidharth, Y. Wu, F. Brenne, W. Abuzaid & H. Sehitoglu. (2020) Relationship Between Functional Fatigue and Structural Fatigue of Iron-Based Shape Memory Alloy FeMnNiAl. Shape Memory and Superelasticity 6:2, pages 256-272.
Crossref

V. V. Kulyk, T. M. Lenkovs’kyi & O. P. Ostash. (2017) Mode I and Mode II Cyclic Crack Resistance of Wheel Steel. Strength of Materials 49:2, pages 256-262.
Crossref

Joshua PellegJoshua Pelleg. 2013. Mechanical Properties of Materials. Mechanical Properties of Materials 449 520 .

H. C. Lin, T. Y. Kuo & H. T. Lee. (2009) Pop-in Crack Propagation Monitoring for AA2024-T3 Ductile Alloy. MATERIALS TRANSACTIONS 50:2, pages 313-320.
Crossref

T.Y. Kuo, H.S. Lin & H.T. Lee. (2005) The relationship between of fracture behaviors and thermomechanical effects of alloy AA2024 of T3 and T81 temper designations using the center crack tensile test. Materials Science and Engineering: A 394:1-2, pages 28-35.
Crossref

N.K. MUKHOPADHYAY, S. GHOSH CHOWDHURY, G. DAS, I. CHATTORAJ, S.K. DAS & D.K. BHATTACHARYA. 2001. Failure Analysis Case Studies II. Failure Analysis Case Studies II 211 223 .

M. A. Linaza & J. M. Rodriguez-Ibabe. (2000) Fracture Static Mechanisms on Fatigue Crack Propagation in Microalloyed Forging Steels. Journal of Engineering Materials and Technology 122:2, pages 198-202.
Crossref

Tsay & Lin. (2002) EFFECT OF LASER BEAM RADIATION ON FATIGUE CRACK PROPAGATION IN AISI 4150 STEEL. Fatigue & Fracture of Engineering Materials & Structures 21:12, pages 1549-1558.
Crossref

N.K. Mukhopadhyay, S.Ghosh Chowdhury, G. Das, I. Chattoraj, S.K. Das & D.K. Bhattacharya. (1998) An investigation of the failure of low pressure steam turbine blades. Engineering Failure Analysis 5:3, pages 181-193.
Crossref

A. Bussiba, H. Alush & M. Kupiec. 1998. Advances in Cryogenic Engineering Materials. Advances in Cryogenic Engineering Materials 299 306 .

D.N. Lal. (1994) A mechanistic model for the effect of stress ratio on the LEFM fatigue crack growth behavior of metals and alloys—II. Crack-brittle materials. Engineering Fracture Mechanics 49:6, pages 899-931.
Crossref

D.N. Lal. (1994) A mechanistic model for the influence of stress ratio on the LEFM fatigue crack growth behavior of metals and alloys—I. Crack-ductile materials. Engineering Fracture Mechanics 49:6, pages 871-897.
Crossref

T.J. Marrow & J.E. King. (1994) Fatigue crack propagation mechanisms in a thermally aged duplex stainless steel. Materials Science and Engineering: A 183:1-2, pages 91-101.
Crossref

D.N. Lal. (1994) A new mechanistic approach to analysing LEFM fatigue crack growth behaviour of metals and alloys. Engineering Fracture Mechanics 47:3, pages 379-401.
Crossref

Shang-Xian Wu, Yiu-Wing Mai & Brian Cotterell. (1992) A model of fatigue crack growth based on Dugdale model and damage accumulation. International Journal of Fracture 57:3, pages 253-267.
Crossref

Reinhold H. Dauskardt, M. R. James, J. R. Porter & R. O. Ritchie. (1992) Cyclic Fatigue-Crack Growth in a SiC-Whisker-Reinforced Alumina Ceramic Composite: Long- and Small-Crack Behavior. Journal of the American Ceramic Society 75:4, pages 759-771.
Crossref

J.H. Bulloch. (1992) Fractographic analysis of fatigue cracking in spheroidal graphite cast irons. Theoretical and Applied Fracture Mechanics 17:1, pages 19-45.
Crossref

T.J. Marrow, C.A. Hippsley & J.E. King. (1991) Effect of mean stress on hydrogen assisted fatique crack propagation in duplex stainless steel. Acta Metallurgica et Materialia 39:6, pages 1367-1376.
Crossref

U.P. Singh & S. Banerjee. (1991) On the origin of pop-in crack extension. Acta Metallurgica et Materialia 39:6, pages 1073-1084.
Crossref

J.F Knott & J.E King. (1991) Fatigue in metallic alloys containing non-metallic particles. Materials & Design 12:2, pages 67-74.
Crossref

J.H. Bulloch. (1991) Threshold fatigue crack extension characteristics of a low alloy steel: The influence of environment and microstructure. International Journal of Pressure Vessels and Piping 47:3, pages 317-331.
Crossref

J.H. Bulloch. (1991) The influence of mean stress or on the fatigue crack threshold characteristics of steels—A review. International Journal of Pressure Vessels and Piping 47:3, pages 263-292.
Crossref

T. E. Chung & R. G. Faulkner. (1990) Parametric representation of fatigue in alloys and its relation to microstructure. Materials Science and Technology 6:12, pages 1187-1192.
Crossref

D.J. Bulloch & J.H. Bulloch. (1989) The influence of R-ratio and microstructure on the threshold fatigue crack growth characteristics of spheroidal graphite cast irons. International Journal of Pressure Vessels and Piping 36:4, pages 289-314.
Crossref

J.H. Bulloch. (1988) The influence of tempering martensite containing microstructures on the near threshold fatigue crack propagation behaviour. Theoretical and Applied Fracture Mechanics 9:1, pages 1-10.
Crossref

I Milne, R.A Ainsworth, A.R Dowling & A.T Stewart. (1988) Assessment of the integrity of structures containing defects. International Journal of Pressure Vessels and Piping 32:1-4, pages 3-104.
Crossref

G. A. Webster. (1987) High temperature fatigue crack growth in superalloy blade materials. Materials Science and Technology 3:9, pages 716-725.
Crossref

J. Botsis, A. Chudnovsky & A. Moet. (1987) Fatigue crack layer propagation in polystyrene?Part I experimental observations. International Journal of Fracture 33:4, pages 263-276.
Crossref

J. Llorca & V. Sanchez-Galvez. (1987) Fatigue threshold determination in high strength cold drawn eutectoid steel wires. Engineering Fracture Mechanics 26:6, pages 869-882.
Crossref

J.H. Bulloch. (1986) Fatigue crack growth studies in rail steels and associated weld metal. Theoretical and Applied Fracture Mechanics 6:2, pages 75-84.
Crossref

Mark E. Orazem & Wolfgang Ruch. (1986) An improved analysis of the potential drop method for measuring crack lengths in compact tension specimens. International Journal of Fracture 31:4, pages 245-258.
Crossref

J.H. Bulloch & D. Alexander. (1986) Corrosion fatigue behaviour of A508 class III steel in a simulated PWR water environment at 325°C. International Journal of Pressure Vessels and Piping 24:4, pages 283-302.
Crossref

J. Botsis, A. Chudnovsky & A. Moet. 1984. Fracture 84. Fracture 84 2595 2602 .

O. N. Romaniv, G. N. Nikiforchin & B. N. Andrusiv. (1984) Influence of fatigue crack closure and geometry on the structural sensitivity of the near-threshold fatigue of steels. Soviet Materials Science 20:1, pages 62-67.
Crossref

J. F. Knott. 1984. Application of Fracture Mechanics to Materials and Structures. Application of Fracture Mechanics to Materials and Structures 3 26 .

K. Tanaka. (1983) The cyclicJ-integral as a criterion for fatigue crack growth. International Journal of Fracture 22:2, pages 91-104.
Crossref

G. T. Gray, J. C. Williams & A. W. Thompson. (1983) Roughness-Induced Crack Closure: An Explanation for Microstructurally Sensitive Fatigue Crack Growth. Metallurgical Transactions A 14:2, pages 421-433.
Crossref

R Horstman, KA Peters, RL Meltzer, M Bruce Vieth & OL Towers. (1983) Review of the Effects of Fatigue Cracking Loads on Plane Strain Fracture Toughness. Journal of Testing and Evaluation 11:1, pages 27.
Crossref

H.W. Liu & Dai Liu. (1982) Near threshold fatigue crack growth behavior. Scripta Metallurgica 16:5, pages 595-600.
Crossref

I. Roman & Kanji Ono. (1982) Model for fracture toughness alteration due to cyclic loading. International Journal of Fracture 19:1, pages 67-80.
Crossref

S. Ya. Yarema, Vas Vas Popovich & Yu. V. Zima. (1982) Influence of structure on the resistance of 65G steel to fatigue crack growth. Soviet Materials Science 18:1, pages 13-26.
Crossref

Kohichi TANAKA. (1981) Fatigue Crack Growth Property of Steel with Particular Reference to Threshold Stress Intensity Range, ΔK<SUB>th</SUB>. Tetsu-to-Hagane 67:2, pages 245-261.
Crossref

I. Roman, Kanji Ono & A.S. Tetelman. (1981) The effect of cyclic loading on the apparent cleavage fracture toughness of 1Cr-Mo-V rotor steel. Engineering Fracture Mechanics 14:1, pages 155-163.
Crossref

J.P. Benson & D.V. Edmonds. (1980) Reply to comments on “Microstructural effects on fatigue at intermediate and high crack growth rates in a low alloy steel”. Materials Science and Engineering 44:2, pages 291-292.
Crossref

G. Tomberger, K. Maier & K. L. Maurer. (2004) Rißbeginn und Rißfortschritt in unlegierten Kohlenstoffstählen. Untersuchungen mit Hilfe der Schallemission. Materialwissenschaft und Werkstofftechnik 11:1, pages 21-30.
Crossref

J.P Benson & D.V Edmonds. (1979) Microstructural effects on fatique at intermediate and high crack growth rates in a low alloy steel. Materials Science and Engineering 38:2, pages 179-186.
Crossref

V. T. TROSHCHENKO, A. V. PROKOPENKO & V. V. POKROVSKY. (2007) CYCLIC LOADING AND FRACTURE TOUGHNESS OF STEELS. Fatigue & Fracture of Engineering Materials & Structures 1:2, pages 247-266.
Crossref

K. Tanaka. (1979) A correlation of ?K th-value with the exponent, m, in the equation of fatigue crack growth for various steels. International Journal of Fracture 15:1, pages 57-68.
Crossref

R. O. Ritchie. (1979) Near-threshold fatigue-crack propagation in steels. International Materials Reviews 24:1, pages 205-230.
Crossref

H. Mughrabi. 1979. Strength of Metals and Alloys. Strength of Metals and Alloys 1615 1638 .

O. Vosikovsky. (1979) The effect of stress ratio on fatigue crack growth rates in steels. Engineering Fracture Mechanics 11:3, pages 595-602.
Crossref

L. I. Domozhirov & G. Z. Zaitsev. (1979) Study of fatigue-crack development in steels 00Kh12N3D and 15Kh2NMFA. Soviet Materials Science 14:4, pages 416-420.
Crossref

G. R. Yoder, L. A. Cooley & T. W. Crooker. (1978) Fatigue crack propagation resistance of beta-annealed Ti-6AI-4V alloys of differing interstitial oxygen contents. Metallurgical Transactions A 9:10, pages 1413-1420.
Crossref

R. J. Richards, S. Purushothaman, J. K. Tien, J. D. Frandsen & O. Buck. (1978) Kinetics of environmental fatigue crack growth in a nickel-copper alloy: Part II. In hydrogen. Metallurgical Transactions A 9:8, pages 1107-1111.
Crossref

O. Vosikovsky & R.J. Cooke. (1978) An analysis of crack extension by corrosion fatigue in a crude oil pipeline. International Journal of Pressure Vessels and Piping 6:2, pages 113-129.
Crossref

V. T. Troshchenko, A. V. Prokopenko & V. V. Pokrovskii. (1978) Fracture toughness characteristics of metals in fatigue. Report no. 2. Strength of Materials 10:3, pages 255-260.
Crossref

Kunihiko KOBAYASHIAsao NARUMOTOMichihiro TANAKATokushi FUNAKOSHI. (1978) Influences of Strength and Non-Metallic Inclusion on the Fatigue Crack Propagation Characteristics in Structural Steels. Tetsu-to-Hagane 64:7, pages 1072-1081.
Crossref

C.J. Beevers. 1978. Advances in Research on the Strength and Fracture of Materials. Advances in Research on the Strength and Fracture of Materials 239 260 .

J.F. Knott. 1978. Advances in Research on the Strength and Fracture of Materials. Advances in Research on the Strength and Fracture of Materials 61 92 .

L.N. McCartney & P.E. Irving. (1977) Comments on: “A correlation for fatigue crack growth rate”. Scripta Metallurgica 11:3, pages 181-183.
Crossref

L. R. Botvina & E. I. Kolokolov. (1976) Fatigue crack propagation in the temperature range of the ductile-brittle transition. Metal Science and Heat Treatment 18:8, pages 709-713.
Crossref

T. Misawa, N. Ringshall & J.F. Knott. (1976) Fatigue crack propagation in a low alloy steel in a de-aerated distilled water environment. Corrosion Science 16:11, pages 805-818.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Some Considerations of the Influence of Sub-Critical Cleavage Growth during Fatigue-Crack Propagation in Steels

Articles from other publishers (63)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature