H.T. Jeong, S.H. Han & W.J. Kim. (2019) Effects of large amounts of Mg (5–13 wt%) on hot compressive deformation behavior and processing maps of Al-Mg alloys. Journal of Alloys and Compounds 788, pages 1282-1299.
Crossref

Takashi MIZUGUCHITsutomu ITO, Kota KIMURATokiko KURISAKAHiroaki OHFUJI. (2018) Transition in Deformation Mechanism during High-Temperature Tensile Testing of Friction-Stir-Processed 5083 Aluminum AlloyTransition in Deformation Mechanism during High-Temperature Tensile Testing of Friction-Stir-Processed 5083 Aluminum Alloy. Journal of the Society of Materials Science, Japan 67:5, pages 568-573.
Crossref

Tsutomu ItoTakashi Mizuguchi. (2017) Coexistence of Grain Boundary Sliding and Solute Drag Creep during High-Temperature Deformation for Fine-Grained Aluminum Solid Solution Alloy. Materia Japan 56:5, pages 346-353.
Crossref

Tetsuya Matsunaga, Yuhki Satoh & Hiroaki Abe. (2015) Accumulation of plastic strain in Zircaloy-4 at low homologous temperature. Journal of Nuclear Materials 465, pages 358-363.
Crossref

. 2015. Fundamentals of Creep in Metals and Alloys. Fundamentals of Creep in Metals and Alloys 301 332 .

Soon-Gi Shin. (2014) Deformation Property of TiC-Mo Solid Solution Single Crystal at High Temperature by Compression Test. Korean Journal of Materials Research 24:11, pages 625-631.
Crossref

Takashi Mizuguchi, Tsutomu Ito, Kota Kimura & Yasuhiro Tanaka. (2014) Contributions of Grain Boundary Sliding and Solute Drag Creep to High-Temperature Ductility in Fine-Grained Polycrystalline 5083 Alloys. Advanced Materials Research 922, pages 360-365.
Crossref

Mary-Anne Kulas, W. Paul Green, Eric M. Taleff, Paul E. Krajewski & Terry R. McNelley. (2005) Deformation mechanisms in superplastic AA5083 materials. Metallurgical and Materials Transactions A 36:5, pages 1249-1261.
Crossref

Kouichi Maruyama, Mayumi Suzuki & Hiroyuki Sato. (2002) Creep strength of magnesium-based alloys. Metallurgical and Materials Transactions A 33:3, pages 875-882.
Crossref

Yuji Nagae, Hiroyuki Sasaki & Hiroshi Oikawa. (2001) Creep deformation of α2 Ti3Al intermetallics in the low stress region. Materials Science and Engineering: A 319-321, pages 805-809.
Crossref

Hiroshi Oikawa. (2001) Some Aspects of Elevated-Temperature Deformation of Single-Phase Alloys. MATERIALS TRANSACTIONS 42:9, pages 1901-1912.
Crossref

B.J. Diak, K.R. Upadhyaya & S. Saimoto. (1998) Characterization of thermodynamic response by materials testing. Progress in Materials Science 43:4, pages 223-363.
Crossref

Eric M. Taleff, Gregory A. Henshall, T. G. Nieh, Donald R. Lesuer & Jeffrey Wadsworth. (1998) Warm-temperature tensile ductility in Al-Mg alloys. Metallurgical and Materials Transactions A 29:3, pages 1081-1091.
Crossref

Soo Woo Nam, Dong-Heon Lee & Kyung Tae Hong. 1992. Mechanical Behaviour of Materials VI. Mechanical Behaviour of Materials VI 533 538 .

Ying-Hwa Yeh, Hideharu Nakashima, Hiroaki Kurishita, Shoji Goto & Hideo Yoshinaga. (1991) High-Temperature Creep and Threshold Stress of Precipitation-Hardened Al-0.7 at%Mn Alloy. Materials Transactions, JIM 32:1, pages 52-60.
Crossref

Ying-Hwa Yeh, Masakazu Miyachi, Hideharu Nakashima, Hiroaki Kurishita, Shoji Goto & Hideo Yoshinaga. (1990) Absence of Threshold Stress for High-Temperature Creep of Dispersion- and Solution-Hardened Al-3.1 at% Mg-1.3 vol% Be Alloy. Materials Transactions, JIM 31:9, pages 778-785.
Crossref

Hideharu Nakashima, Koji Iwasaki, Shoji Goto & Hideo Yoshinaga. (1990) Combined Effect of Solution and Dispersion Hardenings at High Temperature. Materials Transactions, JIM 31:1, pages 35-45.
Crossref

Masayuki NAKATA, Tsukasa YURI & Hiroshi OIKAWA. 1989. Design & Analysis. Design & Analysis 1615 1620 .

Hiroshi Oikawa, Masayuki Nakata & Shigeru Ito. (1988) Instantaneous Strain upon Sudden Stress Changes during Steady-State Creep of Dilute Al–Mg Alloys. Transactions of the Japan Institute of Metals 29:3, pages 208-215.
Crossref

J.S. Wang & W.D. Nix. (1986) High temperature creep and fracture properties of a class I solid solution alloy: Cu-2.7 at.% Sn. Acta Metallurgica 34:3, pages 545-555.
Crossref

Hiroaki Kurishita, Reiji Matsubara, Jinichi Shiraishi & Hideo Yoshinaga. (1986) Solution Hardening of Titanium Carbide by Molybdenum. Transactions of the Japan Institute of Metals 27:11, pages 858-869.
Crossref

Hiroshi Oikawa, Hiroyuki Sato & Kouichi Maruyama. (1985) Influence of temperature on the transition of deformation characteristics of Al1Mg alloy in the power law creep regime. Materials Science and Engineering 75:1-2, pages 21-28.
Crossref

M.J. Mills, J.C. Gibeling & W.D. Nix. (1985) A dislocation loop model for creep of solid solutions based on the steady state and transient creep properties of Al-5.5 at.% Mg. Acta Metallurgica 33:8, pages 1503-1514.
Crossref

D. O. Northwood, L. Moerner & I. O. Smith. (1985) Effect of magnesium content on the stress exponent and effective stress in the steady state creep of Al-Mg alloys. Journal of Materials Science 20:5, pages 1683-1692.
Crossref

A. Nohara. (1985) Dislocation-structure changes during the dip tests and the dynamical internal stress in AlMg alloys at high temperatures. physica status solidi (a) 88:1, pages 213-222.
Crossref

Derek O. Northwood & I.O. Smith. (1985) Effect of magnesium content on the stress exponent and internal stress in the steady state creep of Al-Mg alloys. Scripta Metallurgica 19:3, pages 279-284.
Crossref

L. Moerner, D. O. Northwood & I. O. Smith. (1985) Instantaneous plastic strain associated with stress changes during the steady state creep of Al and Al-4.20 at% Mg alloy. Journal of Materials Science 20:3, pages 797-806.
Crossref

Hideo Yoshinaga, Satoru Matsuo & Hiroaki Kurishita. (1985) Dislocation Density and Internal Stress in an Al-5.7 at%Mg Alloy. Transactions of the Japan Institute of Metals 26:6, pages 423-432.
Crossref

I.O. Smith & D.O. Northwood. 1985. Strength of Metals and Alloys (ICSMA 7). Strength of Metals and Alloys (ICSMA 7) 779 784 .

E. Weckert & W. Blum. 1985. Strength of Metals and Alloys (ICSMA 7). Strength of Metals and Alloys (ICSMA 7) 773 778 .

Takao Endo, Takashi Shimada & Terence G. Langdon. (1984) The deviation from creep by viscous glide in solid solution alloys at high stresses—I. Characteristics of the dragging stress. Acta Metallurgica 32:11, pages 1991-1999.
Crossref

Terence G. Langdon & Parviz Yavari. (1982) An investigation of Harper-Dorn creep—II. The flow process. Acta Metallurgica 30:4, pages 881-887.
Crossref

Takao Endo, Masaharu Tasaki, Masahiro Kubo & Takashi Shimada. (1982) High Temperature Deformation of an Al–5 at%Mg Alloy under Combined High Frequency Stresses. Transactions of the Japan Institute of Metals 23:11, pages 665-673.
Crossref

Hideo Yoshinaga, Zenji Horita & Hiroaki Kurishita. (1981) Determination of high-temperature deformation mechanism in crystalline materials by the strain-rate change test. Acta Metallurgica 29:11, pages 1815-1824.
Crossref

S. R. Macewen, R. G. Fleck, E. T. C. Ho & O. T. Woo. (1981) Deformation of α-zirconium in the vicinity of 0.5 tinm. Metallurgical Transactions A 12:10, pages 1751-1759.
Crossref

Parviz Yavari, Farghalli A. Mohamed & Terence G. Langdon. (1981) Creep and substructure formation in an Al-5% Mg solid solution alloy. Acta Metallurgica 29:8, pages 1495-1507.
Crossref

N. K. Gobran & F. M. Mansy. (1981) Effect of pre-strain on the steady state creep of Al-5 wt% Mg. Acta Physica Academiae Scientiarum Hungaricae 50:4, pages 403-408.
Crossref

Noboru Matsuno & Hiroshi Oikawa. (1981) Structure change during primary creep of Al-5.5 at % Mg alloy. Scripta Metallurgica 15:3, pages 319-322.
Crossref

N. K. Gobran & F. M. Mansy. (1980) Stress dependence of creep mechanism of an Al-2wt%Mg alloy at high temperature. Physica Status Solidi (a) 62:2, pages K163-K165.
Crossref

Hiroshi OIKAWA, Makoto SAEKI & Seiichi KARASHIMA. (1979) Creep Mechanism of Fe-4. lat. pct. Mo Alloy at High Temperatures. Tetsu-to-Hagane 65:7, pages 843-850.
Crossref

Hiroshi Oikawa, Daijiro Mizukoshi & Seiichi Karashima. (1978) Creep mechanism in Fe-1.8 At. Pct Mo alloy at high temperatures. Metallurgical Transactions A 9:9, pages 1281-1285.
Crossref

Hiroshi Oikawa, Katsuyoshi Sugawara & Seiichi Karashima. (1978) Creep Behavior of Al-2.2 at%Mg Alloy at 573 K. Transactions of the Japan Institute of Metals 19:11, pages 611-616.
Crossref

Hiroshi Oikawa & Katsuyoshi Sugawara. (1978) Instantaneous plastic strain associated with stress increments during the steady state creep of Al and Al-5.5 At. Pct. Mg alloy. Scripta Metallurgica 12:1, pages 85-89.
Crossref

Hiroshi Oikawa & Seiichi Karashima. (1976) High-temperature creep mechanism in an Al-2 at% Mg alloy determined by stress-relaxation tests. Scripta Metallurgica 10:10, pages 885-888.
Crossref

S. Takeuchi & A. S. Argon. (1976) Steady-state creep of single-phase crystalline matter at high temperature. Journal of Materials Science 11:8, pages 1542-1566.
Crossref

Ken Ichihashi, Hiroshi Oikawa & Seiichi Karashima. (1976) Slip Bands and Deformation Structure Developed during Creep in Alpha-Iron Single Crystals at 973 K. Transactions of the Japan Institute of Metals 17:7, pages 408-413.
Crossref

K. Maruyama & S. Karashima. (1975) Theoretical Consideration of Measurement of Work-Hardening and Recovery Rates during High Temperature Creep. Transactions of the Japan Institute of Metals 16:11, pages 671-678.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Creep Mechanism of AI-Mg Alloys at High Temperatures

Articles from other publishers (47)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature