Citations (87)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (16)
Teng Wu, Run Wu, Bin Liu, Wen Liang & Deqing Ke. (2020) Microstructural and mechanical properties of ultra-high-strength dual-phase steel produced by ultra-fast cooling. Materials Science and Technology 36:7, pages 843-851.
Read now
Read now
H. Seyedrezai, A. K. Pilkey & J. D. Boyd. (2018) Effects of martensite particle size and spatial distribution on work hardening behaviour of fine-grained dual-phase steel. Canadian Metallurgical Quarterly 57:1, pages 28-37.
Read now
Read now
Nazmul Huda, Yuquan Ding & Adrian P. Gerlich. (2017) Temper-treatment development to decompose detrimental martensite–austenite and its effect on linepipe welds. Materials Science and Technology 33:16, pages 1978-1992.
Read now
Read now
B. Avishan, S. Yazdani, F. G. Caballero, T. S. Wang & C. Garcia-Mateo. (2015) Characterisation of microstructure and mechanical properties in two different nanostructured bainitic steels. Materials Science and Technology 31:12, pages 1508-1520.
Read now
Read now
Y. Li & T. N. Baker. (2010) Effect of morphology of martensite–austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels. Materials Science and Technology 26:9, pages 1029-1040.
Read now
Read now
Juan Asensio-Lozano & Julio
Tito Panta-Mesones. (2008) Evaluation of the Heat Treatment Response of a Multiphase Hot-Rolled Steel Processed by Controlled Rolling and Accelerated Cooling. Materials and Manufacturing Processes 23:4, pages 357-362.
Read now
Read now
B.-C. Hwang, T.-Y. Cao, S. Y. Shin, S.-H. Kim, S.-H. Lee & S.-J. Kim. (2005) Effects of ferrite grain size and martensite volume fraction on dynamic deformation behaviour of 0·15C–2·0Mn–0·2Si dual phase steels. Materials Science and Technology 21:8, pages 967-975.
Read now
Read now
A.J. Abdalla, L.R.O. Hein, M.S. Pereira & T.M. Hashimoto. (1999) Mechanical behaviour of strain aged dual phase steels. Materials Science and Technology 15:10, pages 1167-1170.
Read now
Read now
A.A. Emelyanov, E.L. Furman, I.P. Conacova & V.A. Beloglazov. (1993) Microstructure and mechanical properties of porous cast aluminium composite. Advanced Composite Materials 3:1, pages 1-5.
Read now
Read now
Z. Jiang, J. Lian & J. Chen. (1992) Strain hardening behaviour and its relationship to tensile mechanical properties of dual phase steel. Materials Science and Technology 8:12, pages 1075-1081.
Read now
Read now
Jingke Liu, Zhonghao Jiang & Jianshe Lian. (1991) Influence of predeformation on microstructure and mechanical properties of 1020 dual phase steel. Materials Science and Technology 7:6, pages 527-532.
Read now
Read now
O. M. Akselsen, Ø. Grong & J. K. Solberg. (1987) Structure–property relationships in intercritical heat affected zone of low-carbon microalloyed steels. Materials Science and Technology 3:8, pages 649-655.
Read now
Read now
Y. S. Zhang & J. Nutting. (1986) High-strain deformation of dual-phase steel. Materials Science and Technology 2:6, pages 564-570.
Read now
Read now
X. J. He, N. Terao & A. Berghezan. (1984) Influence of martensite morphology and its dispersion on mechanical properties and fracture mechanisms of Fe-Mn-C dual phase steels. Metal Science 18:7, pages 367-373.
Read now
Read now
R. Rawlings. (1983) Relative work hardening rates. Metal Science 17:3, pages 150-150.
Read now
Read now
T. Gladman. (1983) Dual-phase and other formable steels. Metals Technology 10:1, pages 274-281.
Read now
Read now
Articles from other publishers (71)
Qing-Qiang Ren, Sung-Il Baik, Dong An, Dieter Isheim, Mingfang Zhu, Bruce W. Krakauer & David N. Seidman. (2023) The effects of heat-treatment parameters on the mechanical properties and microstructures of a low-carbon dual-phase steel. Materials Science and Engineering: A 888, pages 145801.
Crossref
Crossref
C. Idzik, A. Krämer, G. Hirt & J. Lohmar. (2023) Coupling of an analytical rolling model and reinforcement learning to design pass schedules: towards properties controlled hot rolling. Journal of Intelligent Manufacturing.
Crossref
Crossref
Kaushal Kishore, Pankaj Kumar & Goutam Mukhopadhyay. (2022) Insights on Microstructure and Failure Characteristics of Resistance Spot Welds of Galvannealed Dual Phase Steel. Journal of Materials Engineering and Performance 31:12, pages 10118-10136.
Crossref
Crossref
Soudip Basu, Anirban Patra, Balila Nagamani Jaya, Sarbari Ganguly, Monojit Dutta & Indradev Samajdar. (2022) Study of microstructure-property correlations in dual phase steels for achieving enhanced strength and reduced strain partitioning. Materialia 25, pages 101522.
Crossref
Crossref
P. Kimthong, P. Wattanapornphan, C. Phongphisutthinan & V. Uthaisangsuk. (2021) Experimental investigations and FE modeling considering microstructural inhomogeneity of laser welded steel-aluminum joints. Archives of Civil and Mechanical Engineering 22:1.
Crossref
Crossref
Bogusława Adamczyk-Cieślak, Milena Koralnik, Roman Kuziak, Kamil Majchrowicz & Jarosław Mizera. (2021) Studies of Bainitic Steel for Rail Applications Based on Carbide-Free, Low-Alloy Steel. Metallurgical and Materials Transactions A 52:12, pages 5429-5442.
Crossref
Crossref
Soudip Basu, Balila Nagamani Jaya, Anirban Patra, Sarbari Ganguly, Monojit Dutta, Anton Hohenwarter & Indradev Samajdar. (2021) The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel. Metallurgical and Materials Transactions A 52:9, pages 4018-4032.
Crossref
Crossref
Bao-Guang Zhang, Xiao-Ming Zhang & Hai-Tao Liu. (2021) Precipitation behavior of B2 and κ-carbide during aging and its effect on mechanical properties in Al-containing high strength steel. Materials Characterization 178, pages 111291.
Crossref
Crossref
Saroj Kumar Basantia, Ankita Bhattacharya, Niloy Khutia & Debdulal Das. (2019) Plastic Behavior of Ferrite–Pearlite, Ferrite–Bainite and Ferrite–Martensite Steels: Experiments and Micromechanical Modelling. Metals and Materials International 27:5, pages 1025-1043.
Crossref
Crossref
Oscar Ríos-Diez, Ricardo Aristizábal-Sierra, Claudia Serna-Giraldo, Adriana Eres-Castellanos & Carlos García-Mateo. (2021) Wear behavior of nanostructured carbo-austempered cast steels under rolling-sliding conditions. Journal of Materials Research and Technology 11, pages 1343-1355.
Crossref
Crossref
D. Frómeta, N. Cuadrado, J. Rehrl, C. Suppan, T. Dieudonné, P. Dietsch, J. Calvo & D. Casellas. (2021) Microstructural effects on fracture toughness of ultra-high strength dual phase sheet steels. Materials Science and Engineering: A 802, pages 140631.
Crossref
Crossref
Tao Fang, Xia Liu, Chendong Shao, Haichao Cui & Fenggui Lu. (2020) Role of tempering cooling rate on impact toughness of 2CrMoV weld metal. Journal of Materials Research 35:12, pages 1612-1621.
Crossref
Crossref
Michael Pfund, Moritz Wenk & Reiner Mönig. (2020) Phase and Microstructure Evolution of a Low-Alloyed Steel During Intercritical Annealing and Quenching. Metallurgical and Materials Transactions A 51:4, pages 1493-1505.
Crossref
Crossref
Nazmul Huda, James Gianetto, Yuquan Ding, Robert Lazor & Adrian P. Gerlich. (2019) Investigation of local tensile strength and ductility properties of an X100 submerged arc seam weld. Materials Science and Engineering: A 768, pages 138475.
Crossref
Crossref
Nazmul Huda, Yiyu Wang, Leijun Li & Adrian P. Gerlich. (2019) Effect of martensite-austenite (MA) distribution on mechanical properties of inter-critical Reheated Coarse Grain heat affected zone in X80 linepipe steel. Materials Science and Engineering: A 765, pages 138301.
Crossref
Crossref
Wei Liu, Juhua Liang, Youhui Jiang, Bing Zhang & Aimin Zhao. (2019) A study of blocky retained austenite and properties under variously heat-treated ultra-fine bainitic steel. Materials Research Express 6:10, pages 105607.
Crossref
Crossref
S. Zeller, M. Baldrich, G. Gerstein, F. Nuernberger, S. Loehnert, H.J. Maier & P. Wriggers. (2019) Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scale. Journal of the Mechanics and Physics of Solids 129, pages 205-228.
Crossref
Crossref
Tanusree Dutta, Swati Dey, Shubhabrata Datta & Debdulal Das. (2019) Designing dual-phase steels with improved performance using ANN and GA in tandem. Computational Materials Science 157, pages 6-16.
Crossref
Crossref
Jean-Hubert Schmitt & Thierry Iung. (2018) New developments of advanced high-strength steels for automotive applications. Comptes Rendus Physique 19:8, pages 641-656.
Crossref
Crossref
Mehran Zamani, Hamed Mirzadeh & Hamid M Ghasemi. (2018) Mechanical properties and fracture behavior of intercritically annealed AISI 4130 chromoly steel. Materials Research Express 5:6, pages 066548.
Crossref
Crossref
Yifei Li, Zhipeng Cai, Kejian Li, Jiluan Pan, Xia Liu, Lingen Sun & Peng Wang. (2018) Investigation of local brittle zone in multipass welded joint of NiCrMoV steel with heavy section. Journal of Materials Research 33:8, pages 923-934.
Crossref
Crossref
Mehdi Maleki, Hamed Mirzadeh & Mehran Zamani. (2017) Effect of Intercritical Annealing on Mechanical Properties and Work‐Hardening Response of High Formability Dual Phase Steel. steel research international 89:4, pages 1700412.
Crossref
Crossref
Hamed Mirzadeh, Mohammad Alibeyki & Mostafa Najafi. (2017) Unraveling the Initial Microstructure Effects on Mechanical Properties and Work-Hardening Capacity of Dual-Phase Steel. Metallurgical and Materials Transactions A 48:10, pages 4565-4573.
Crossref
Crossref
Nazmul Huda, Robert Lazor & Adrian P. Gerlich. (2017) Study of MA Effect on Yield Strength and Ductility of X80 Linepipe Steels Weld. Metallurgical and Materials Transactions A 48:9, pages 4166-4179.
Crossref
Crossref
Hrishikesh Das, Kwang-Jin Lee & Sung-Tae Hong. (2017) Study on Microtexture and Martensite Formation of Friction Stir Lap-welded DP 590 Steel within A1 to A3 Temperature Range. Journal of Materials Engineering and Performance 26:7, pages 3607-3613.
Crossref
Crossref
F. Rieger, M. Wenk, S. Schuster & T. Böhlke. (2017) Mechanism based mean-field modeling of the work-hardening behavior of dual-phase steels. Materials Science and Engineering: A 682, pages 126-138.
Crossref
Crossref
N. Fonstein. 2017. Automotive Steels. Automotive Steels
169
216
.
A. Varshney, S. Sangal & K. Mondal. (2016) Strain Partitioning and Load Transfer in Constituent Phases in Dual-Phase Steels. Journal of Materials Engineering and Performance 25:9, pages 3993-4003.
Crossref
Crossref
Nazmul Huda, Abdelbaset R.H. Midawi, James Gianetto, Robert Lazor & Adrian P. Gerlich. (2016) Influence of martensite-austenite (MA) on impact toughness of X80 line pipe steels. Materials Science and Engineering: A 662, pages 481-491.
Crossref
Crossref
A. Varshney, S. Sangal, S. Kundu & K. Mondal. (2016) Super strong and highly ductile low alloy multiphase steels consisting of bainite, ferrite and retained austenite. Materials & Design 95, pages 75-88.
Crossref
Crossref
Hardy Mohrbacher. 2016. HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015. HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015
605
611
.
Hardy Mohrbacher. 2015. HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015. HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015
605
611
.
Krzysztof Radwa?ski, Andrzej Wro?yna & Roman Kuziak. (2015) Role of the advanced microstructures characterization in modeling of mechanical properties of AHSS steels. Materials Science and Engineering: A 639, pages 567-574.
Crossref
Crossref
Carlos Garcia‐Mateo & Francisca G. Caballero. 2015. Handbook of Mechanical Nanostructuring. Handbook of Mechanical Nanostructuring
35
65
.
M. Rossini, P. Russo Spena, L. Cortese, P. Matteis & D. Firrao. (2015) Investigation on dissimilar laser welding of advanced high strength steel sheets for the automotive industry. Materials Science and Engineering: A 628, pages 288-296.
Crossref
Crossref
A. Varshney, D. Verma, S. Sangal & K. Mondal. (2014) High Strength High Carbon Low Alloy Pearlite-Ferrite-Tempered Martensite Steels. Transactions of the Indian Institute of Metals 68:1, pages 117-128.
Crossref
Crossref
Nina FonsteinNina Fonstein. 2015. Advanced High Strength Sheet Steels. Advanced High Strength Sheet Steels
139
184
.
Juliovany Drumond, Flávio José Saraiva Rodrigues, Gabriel Godinho Alves, Gladistone de Souza Guerra & Fabrício Moreira Cerqueira. (2014) EFEITO DA ADIÇÃO DE BORO NO AÇO BIFÁSICO DP980 NA ARCELORMITTAL BRASIL. EFEITO DA ADIÇÃO DE BORO NO AÇO BIFÁSICO DP980 NA ARCELORMITTAL BRASIL.
F. G. Caballero, C. Garcia-Mateo & M. K. Miller. (2014) Design of Novel Bainitic Steels: Moving from UltraFine to Nanoscale Structures. JOM 66:5, pages 747-755.
Crossref
Crossref
A. Ramazani, K. Mukherjee, A. Abdurakhmanov, U. Prahl, M. Schleser, U. Reisgen & W. Bleck. (2014) Micro–macro-characterisation and modelling of mechanical properties of gas metal arc welded (GMAW) DP600 steel. Materials Science and Engineering: A 589, pages 1-14.
Crossref
Crossref
C. Garcia-Mateo & F.G. Caballero. 2014. Comprehensive Materials Processing. Comprehensive Materials Processing
165
190
.
Surajit Kumar Paul. (2013) Effect of martensite volume fraction on stress triaxiality and deformation behavior of dual phase steel. Materials & Design 50, pages 782-789.
Crossref
Crossref
Surajit Kumar Paul. (2013) Real microstructure based micromechanical model to simulate microstructural level deformation behavior and failure initiation in DP 590 steel. Materials & Design 44, pages 397-406.
Crossref
Crossref
A. Ramazani, K. Mukherjee, H. Quade, U. Prahl & W. Bleck. (2013) Correlation between 2D and 3D flow curve modelling of DP steels using a microstructure-based RVE approach. Materials Science and Engineering: A 560, pages 129-139.
Crossref
Crossref
Surajit Kumar Paul. (2012) Micromechanics based modeling of Dual Phase steels: Prediction of ductility and failure modes. Computational Materials Science 56, pages 34-42.
Crossref
Crossref
Mehdi Asadi, Bruno Charles De Cooman & Heinz Palkowski. (2012) Influence of martensite volume fraction and cooling rate on the properties of thermomechanically processed dual phase steel. Materials Science and Engineering: A 538, pages 42-52.
Crossref
Crossref
A. Ramazani, K. Mukherjee, U. Prahl & W. Bleck. (2012) Modelling the effect of microstructural banding on the flow curve behaviour of dual-phase (DP) steels. Computational Materials Science 52:1, pages 46-54.
Crossref
Crossref
Seung Youb Han, Sang Yong Shin, Sunghak Lee, Nack J. Kim, Jai-Hyun Kwak & Kwang-Geun Chin. (2010) Effect of Carbon Content on Cracking Phenomenon Occurring during Cold Rolling of Three Light-Weight Steel Plates. Metallurgical and Materials Transactions A 42:1, pages 138-146.
Crossref
Crossref
S. Moeinifar, A.H. Kokabi & H.R. Madaah Hosseini. (2010) Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture properties of the reheated zones. Materials & Design 31:6, pages 2948-2955.
Crossref
Crossref
R. Bakhtiari & A. Ekrami. (2010) Microstructural Study of a High Bainite Dual Phase (HBDP) Steel Austempered at Different Temperatures. Defect and Diffusion Forum 297-301, pages 62-67.
Crossref
Crossref
V. P. Shveikin & S. V. Smirnov. (2010) Strain hardening and plasticity of low-carbon steels with a heterophase structure: I. Strain hardening characteristics of steels during uniaxial tension. Russian Metallurgy (Metally) 2009:5, pages 406-411.
Crossref
Crossref
Sang Yong Shin, Kuk Je Woo, Byoungchul Hwang, Sangho Kim & Sunghak Lee. (2009) Fracture-Toughness Analysis in Transition-Temperature Region of Three American Petroleum Institute X70 and X80 Pipeline Steels. Metallurgical and Materials Transactions A 40:4, pages 867-876.
Crossref
Crossref
Francisca G. Caballero, Carlos GarcíA-Mateo, Jesús Chao, María Jesús Santofimia, Carlos Capdevila & Carlos García de Andrés. (2008) Effects of Morphology and Stability of Retained Austenite on the Ductility of TRIP-aided Bainitic Steels. ISIJ International 48:9, pages 1256-1262.
Crossref
Crossref
R. KUZIAK, R. KAWALLA & S. WAENGLER. (2008) Advanced high strength steels for automotive industry. Archives of Civil and Mechanical Engineering 8:2, pages 103-117.
Crossref
Crossref
N. Fonstein, M. Kapustin, N. Pottore, I. Gupta & O. Yakubovsky. (2007) Factors that determine the level of the yield strength and the return of the yield-point elongation in low-alloy ferrite-martensite steels. The Physics of Metals and Metallography 104:3, pages 315-323.
Crossref
Crossref
SANG YONG SHIN, GUILIANG GONG, SANGHO KIM & SUNGHAK LEE. (2007) Analysis of Fracture Toughness in the Transition Temperature Region of API X70 Pipeline Steels Rolled in Two-Phase Region. Metallurgical and Materials Transactions A 38:5, pages 1012-1021.
Crossref
Crossref
Hardy Mohrbacher & Christian Klinkenberg. (2007) The Role of Niobium in Lightweight Vehicle Construction. Materials Science Forum 537-538, pages 679-686.
Crossref
Crossref
M. Mazinani & W.J. Poole. (2007) Effect of Martensite Plasticity on the Deformation Behavior of a Low-Carbon Dual-Phase Steel. Metallurgical and Materials Transactions A 38:2, pages 328-339.
Crossref
Crossref
F. Brian Pickering. 2006. Materials Science and Technology. Materials Science and Technology.
H. Hofmann, D. Mattissen & T. W. Schaumann. (2006) Advanced cold rolled steels for automotive applications. Materialwissenschaft und Werkstofftechnik 37:9, pages 716-723.
Crossref
Crossref
Anthony J. DeArdo, J.E. Garcia, Ming Jian Hua & C. Isaac Garcia. (2005) A New Frontier in Microalloying: Advanced High Strength, Coated Sheet Steels. Materials Science Forum 500-501, pages 27-38.
Crossref
Crossref
Carlos García-MateoFrancisca G. Caballero. (2005) The Role of Retained Austenite on Tensile Properties of Steels with Bainitic Microstructures. MATERIALS TRANSACTIONS 46:8, pages 1839-1846.
Crossref
Crossref
Sangho Kim, Young-Roc Im, Sunghak Lee, Hu-Chul Lee, Sung-Joon Kim & Jun Hwa Hong. (2004) Effects of alloying elements on fracture toughness in the transition temperature region of base metals and simulated heat-affected zones of Mn-Mo-Ni low-alloy steels. Metallurgical and Materials Transactions A 35:7, pages 2027-2037.
Crossref
Crossref
Sangho Kim, Sunghak Lee, Young-Roc Im, Hu-Chul Lee, Yong Jun Oh & Jun Hwa Hong. (2001) Effects of alloying elements on mechanical and fracture properties of base metals and simulated heat-affected zones of SA 508 steels. Metallurgical and Materials Transactions A 32:4, pages 903-911.
Crossref
Crossref
B. Ehrhardt, B. Engl, T. Gerber & U. Schriever. New Microstructural Approaches for Improved Mechanical Properties of Multiphase Steels with Emphasis on TRIP Steels. New Microstructural Approaches for Improved Mechanical Properties of Multiphase Steels with Emphasis on TRIP Steels.
M. Sarwar & R. Priestner. (1996) Influence of ferrite-martensite microstructural morphology on tensile properties of dual-phase steel. Journal of Materials Science 31:8, pages 2091-2095.
Crossref
Crossref
C. L. Davis & J. E. King. (1994) Cleavage initiation in the intercritically reheated coarse-grained heat-affected zone: Part I. Fractographic evidence. Metallurgical and Materials Transactions A 25:3, pages 563-573.
Crossref
Crossref
L. Giordano, P. Matteazzi, A. Tiziani & A. Zambon. (1991) Retained austenite variation in dual-phase steel after mechanical stressing and heat treatment. Materials Science and Engineering: A 131:2, pages 215-219.
Crossref
Crossref
N. Terao & B. Cauwe. (1988) Influence of additional elements (Mo, Nb, Ta and B) on the mechanical properties of high-manganese dual-phase steels. Journal of Materials Science 23:5, pages 1769-1778.
Crossref
Crossref
Naomi MATSUMURA & Masaharu TOKIZANE. (1984) Microstructure and the Mechanical Properties of Dual-phase Steel Produced by Intercritical Annealing of Lath Martensite. Tetsu-to-Hagane 70:2, pages 246-253.
Crossref
Crossref
A. H. Yegneswaran & K. Tangri. (1983) Investigation of the early stages of deformation of two phase copper-aluminum alloys. Metallurgical Transactions A 14:11, pages 2407-2413.
Crossref
Crossref