Hongyun He, Genlian Fan, Farhad Saba, Zhanqiu Tan, Zhu Su, Dingbang Xiong & Zhiqiang Li. (2023) Enhanced distribution and mechanical properties of high content nanoparticles reinforced metal matrix composite prepared by flake dispersion. Composites Part B: Engineering 252, pages 110514.
Crossref

Jing Xue, Shenbao Jin, Xianghai An, Xiaozhou Liao, Jiehua Li & Gang Sha. (2019) Understanding formation of Mg-depletion zones in Al-Mg alloys under high pressure torsion. Journal of Materials Science & Technology 35:5, pages 858-864.
Crossref

Congwei Cai, Xue Wang, Zhimin Liang, Yuzhong Rao, Hongbo Wang & Dejun Yan. (2018) Effects of Water-Cooling on the Mechanical Properties and Microstructure of 5083 Aluminum Alloy during Flame Straightening. Metals 8:9, pages 692.
Crossref

Philipp Frint, Markus Härtel, René Selbmann, Dagmar Dietrich, Markus Bergmann, Thomas Lampke, Dirk Landgrebe & Martin Wagner. (2018) Microstructural Evolution during Severe Plastic Deformation by Gradation Extrusion. Metals 8:2, pages 96.
Crossref

Yuan-ji Shi, Lan-ji Liu, Lei Zhang, Li-jun Zhang, Li Zheng, Run-xia Li & Bao-yi Yu. (2017) Effect of squeeze casting process on microstructures and flow stress behavior of Al-17. 5Si-4Cu-0.5Mg alloy. Journal of Iron and Steel Research International 24:9, pages 957-965.
Crossref

. 2017. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena 647 681 .

Ge Cheng Yuan, An Chen Yang, Zhen Hua Zhu & Yong Qi Cheng. (2015) Modeling of Flow Stress and Grain Size Based on Z Parameter and Material Constants of Al-5.2Mg-0.6Mn Alloy during Hot Deformation. Materials Science Forum 817, pages 748-754.
Crossref

Xu Jing, Li Chaoxing, Zheng Kaihong & Huang Zhenghua. (2014) Hot Deformation Behavior and Microstructure of AZ31-1Sm Alloy Compression at Elevated Temperatures. Rare Metal Materials and Engineering 43:11, pages 2572-2575.
Crossref

Yong Biao Yang, Zhi Min Zhang, Feng Li Ren & Qiang Wang. (2014) Hot Deformation Behavior of As-Cast Mg-9Gd-2.5Y-Nd-0.5Zr Mg Alloy. Materials Science Forum 788, pages 45-51.
Crossref

Luo-xing LI, Guan WANG, Jie LIU & Zai-qi YAO. (2014) Flow softening behavior and microstructure evolution of Al–5Zn–2Mg aluminum alloy during dynamic recovery. Transactions of Nonferrous Metals Society of China 24:1, pages 42-48.
Crossref

Ran Xu Yu, Shi Yi Wang, Qiong Tang & Xiao Qin Zeng. (2013) Deformation and Workability Evaluation of GW103K Magnesium Alloy in Hot Compression. Materials Science Forum 747-748, pages 204-210.
Crossref

Zhi-ye ZHANG, Qing-lin PAN, Jian ZHOU, Xiao-yan LIU & Qin CHEN. (2012) Hot deformation behavior and microstructural evolution of Al–Zn–Mg–0.25Sc–Zr alloy during compression at elevated temperatures. Transactions of Nonferrous Metals Society of China 22:7, pages 1556-1562.
Crossref

Makoto Ando, Yoshikazu Suzuki & Goroh Itoh. (2012) Effects of magnesium addition on threshold stress of Al^|^ndash;Mn alloys. Journal of Japan Institute of Light Metals 62:8, pages 300-305.
Crossref

A. Güzel, A. Jäger, F. Parvizian, H.-G. Lambers, A.E. Tekkaya, B. Svendsen & H.J. Maier. (2012) A new method for determining dynamic grain structure evolution during hot aluminum extrusion. Journal of Materials Processing Technology 212:1, pages 323-330.
Crossref

Aruna Patel, S. Das & B.K. Prasad. (2011) Compressive deformation behaviour of Al alloy (2014)–10wt.% SiCp composite: Effects of strain rates and temperatures. Materials Science and Engineering: A 530, pages 225-232.
Crossref

Hideo YoshidaHidetoshi Uchida. (2011) Al–Mg Alloys（2）Al–Mg系合金（2）. Journal of Japan Institute of Light Metals 61:11, pages 684-697.
Crossref

Hideo YoshidaHidetoshi Uchida. (2011) Al–Mg Alloys（1）Al–Mg系合金（1）. Journal of Japan Institute of Light Metals 61:10, pages 568-582.
Crossref

Jun Qing Guo, Hui Yun Zhang & Fu Tao Sun. (2011) Numerical Simulation on Back-Extrusion Loadcase of Magnesium Alloy Wheel. Applied Mechanics and Materials 117-119, pages 1861-1864.
Crossref

Enrico Evangelista. 2011. Hot Deformation and Processing of Aluminum Alloys. Hot Deformation and Processing of Aluminum Alloys 87 142 .

Enrico Evangelista. 2011. Hot Deformation and Processing of Aluminum Alloys. Hot Deformation and Processing of Aluminum Alloys 21 51 .

Minglong MA, Lanqiang HE, Xinggang LI, Yongjun LI & Kui ZHANG. (2011) Hot workability of Mg-9Y-1MM-0.6Zr alloy. Journal of Rare Earths 29:5, pages 460-465.
Crossref

Kui Zhang, Minglong Ma, Xinggang Li, Yongjun Li, Lichao Liang & Mengfen Bing. (2011) Hot deformation behavior of Mg-7.22Gd-4.84Y-1.26Nd-0.58Zr magnesium alloy. Rare Metals 30:1, pages 87-93.
Crossref

Yun Bin He, Qing Lin Pan, Xiao Yan Liu & Wen Bin Li. (2010) Study of Hot Compression Behavior of ZK60 Magnesium Alloy at Elevated Temperature. Advanced Materials Research 154-155, pages 1-10.
Crossref

Ming-long MA, Kui ZHANG, Xing-gang LI, Yong-jun LI & Kang ZHANG. (2008) Hot deformation behavior of rare earth magnesium alloy without pre-homogenization treatment. Transactions of Nonferrous Metals Society of China 18, pages s132-s139.
Crossref

Kentaro Ihara & Yasuhiro Miura. (2004) Dynamic recrystallization in Al–Mg–Sc alloys. Materials Science and Engineering: A 387-389, pages 647-650.
Crossref

Yasumasa Chino, Mamoru Mabuchi, Hajime Iwasaki, Atsushi Yamamoto & Harushige Tsubakino. (2004) Tensile Properties and Blow Forming of 5083 Aluminum Alloy Recycled by Solid-State Recycling. MATERIALS TRANSACTIONS 45:8, pages 2509-2515.
Crossref

. 2004. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena 557 615 .

Yasumasa Chino, Mamoru Mabuchi, Satoshi Otsuka, Koji Shimojima, Hiroyuki Hosokawa, Yasuo Yamada, Cui’e Wen & Hajime Iwasaki. (2003) Corrosion and Mechanical Properties of Recycled 5083 Aluminum Alloy by Solid State Recycling. MATERIALS TRANSACTIONS 44:7, pages 1284-1289.
Crossref

Masanobu FURUTA & Yoshihiro NAKAYAMA. (2001) Effect of solution treatment temperature on precipitation behavior in Al-7%Mg alloy improved by chromium or manganese addition.. Journal of Japan Institute of Light Metals 51:6, pages 318-323.
Crossref

Terry SheppardTerry Sheppard. 1999. Extrusion of Aluminium Alloys. Extrusion of Aluminium Alloys 69 126 .

H. J. McQueen. (1998) Substructural influence in the hot rolling of Al alloys. JOM 50:6, pages 28-33.
Crossref

J.K. Kim, D.H. Shin & W.J. Kim. (1998) High-Strain-Rate Superplastic Behavior of Ingot-Processed Al-Mg-Fe Alloy. Scripta Materialia 38:6, pages 991-998.
Crossref

J. Zhang & A.T. Alpas. (1997) Transition between mild and severe wear in aluminium alloys. Acta Materialia 45:2, pages 513-528.
Crossref

H MCQUEEN & O CELLIERS. (1996) Application of hot workability studies to extrusion processing: Part II. Microstructural development and extrusion of Al, Al-Mg, AND Al-Mg-Mn Alloys. Canadian Metallurgical Quarterly 35:4, pages 305-319.
Crossref

W.M. Zhong, E. Goiffon, G. L'Espérance, M. Suéry & J.J. Blandin. (1996) Effect of thermomechanical processing on the microstructure and mechanical properties of AlMg (5083)/SiCp and AlMg (5083)/Al2O3p composites. Part 1: Dynamic recrystallization of the composites. Materials Science and Engineering: A 214:1-2, pages 84-92.
Crossref

W. Lehnert & N.D. Cuong. (1996) Experimental and mathematical simulation of microstructural evolution during hot rolling of Al and Cu material. Journal of Materials Processing Technology 60:1-4, pages 567-574.
Crossref

W. Blum, Q. Zhu, R. Merkel & H.J. McQueen. (1996) Geometric dynamic recrystallization in hot torsion of Al5Mg0.6Mn (AA5083). Materials Science and Engineering: A 205:1-2, pages 23-30.
Crossref

H. J. McQueen, E. Evangelista, N. Jin & M. E. Kassner. (1995) Energy dissipation efficiency in aluminum dependent on monotonic flow curves and dynamic recovery. Metallurgical and Materials Transactions A 26:7, pages 1757-1766.
Crossref

J. Sarkar, Y. V. R. K. Prasad & M. K. Surappa. (2004) Optimization of hot workability of an Al-Mg-Si alloy using processing maps. Journal of Materials Science 30:11, pages 2843-2848.
Crossref

. 1995. Recrystallization and Related Annealing Phenomena. Recrystallization and Related Annealing Phenomena 449 488 .

H.J. McQueen. (1993) Metal forming: Industrial, mechanical computational and microstructural. Journal of Materials Processing Technology 37:1-4, pages 3-36.
Crossref

J.P. Lin, T.C. Lei & X.Y. An. (1993) Reply to the paper of comments on, “Dynamic recrystallization during hot compression in Al-Mg alloy”. Scripta Metallurgica et Materialia 28:1, pages 157-160.
Crossref

J. P. Lin, X. Y. An & T. Q. Lei. (1993) Dynamic recrystallization during hot-rolling in Al-6Mg alloy. Journal of Materials Science Letters 12:11, pages 850-851.
Crossref

S.M. Kuo & D.A. Rigney. (1992) Sliding behavior of aluminum. Materials Science and Engineering: A 157:2, pages 131-143.
Crossref

N. Ravichandran & Y. V. R. K. Prasad. (1991) Dynamic recrystallization during hot deformation of aluminum: A study using processing maps. Metallurgical Transactions A 22:10, pages 2339-2348.
Crossref

Taku Sakai & Chiori Takahashi. (1991) Flow Softening of 7075 Aluminum Alloy under Hot Compression. Materials Transactions, JIM 32:4, pages 375-382.
Crossref

J.F. Mao, X.Y. An & T.Q. Lei. (1990) Dynamic restoration of hot-rolled Al-Mg alloys. Materials Chemistry and Physics 25:3, pages 297-305.
Crossref

M.A. ZAIDI & J.A. WERT. 1989. Aluminum Alloys—Contemporary Research and Applications. Aluminum Alloys—Contemporary Research and Applications 137 170 .

X.Y. An, J.P. Lin, T.C. Lei & B.T. Yu. 1989. Strength of Metals and Alloys (ICSMA 8). Strength of Metals and Alloys (ICSMA 8) 971 976 .

Xi Yong An, Jun Pin Lin, Lin Yeng & Ting Quan Lei. (1988) Dynamic and metadynamic recrystallization in Al-Mg alloys. Materials Chemistry and Physics 20:3, pages 275-281.
Crossref

Xi Yong An, Jun Pin Lin & Ting Quan Let. (1987) Restoration mechanism during hot tension of an Al-4. 5Cu-1. 5Mg alloy. Materials Chemistry and Physics 18:3, pages 255-263.
Crossref

P. Olla & P. F. Virdis. (1987) High temperature deformation of a commercial aluminum alloy. Metallurgical Transactions A 18:2, pages 293-301.
Crossref

M. Van Rooyen, P. F. Colijn, Th. H. De Keijser & E. J. Mittemeijer. (1986) Morphology and mechanical properties of melt-spun and conventionally cast aluminium, AlMg and AlSi alloys before and after hot extrusion. Journal of Materials Science 21:7, pages 2373-2384.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Dynamic recrystallization in Al–7Mg alloy

Articles from other publishers (54)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature