H. Jin. (2019) Optimization of Aluminum Alloy AA5083 for Superplastic and Quick Plastic Forming. Metallurgical and Materials Transactions A 50:8, pages 3868-3890.
Crossref

H. Jin, B. Shalchi Amirkhiz & D. J. Lloyd. (2018) Improvement of Superplasticity in High-Mg Aluminum Alloys by Sacrifice of Some Room Temperature Formability. Metallurgical and Materials Transactions A 49:5, pages 1962-1979.
Crossref

S. M. Chentouf, T. Belhadj, N. Bombardier, N. Brodusch, R. Gauvin & M. Jahazi. (2016) Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy. The International Journal of Advanced Manufacturing Technology 88:9-12, pages 2929-2937.
Crossref

Nagore Otegi, Lander Galdos, Iñaki Hurtado & Sean B. Leen. (2012) New Strategy for the Prediction of the Gas Pressure Profile of Superplastic Forming of Al-5083 Aluminium Alloy. Materials Science Forum 735, pages 204-209.
Crossref

Erik Rybacki, Richard Wirth & Georg Dresen. (2010) Superplasticity and ductile fracture of synthetic feldspar deformed to large strain. Journal of Geophysical Research 115:B8.
Crossref

A.K. Ghosh, D.-H. Bae & S.L. Semiatin. 2009. Fundamentals of Modeling for Metals Processing. Fundamentals of Modeling for Metals Processing 339 345 .

Masataka HakamadaAkira WatazuNaobumi SaitoHajime Iwasaki. (2009) Grain Refinement and Superplasticity Induced by Hot Compression of Continuously-Casted Mg-9Al-1Zn-1Ca and Mg-9Al-1Zn Alloys. MATERIALS TRANSACTIONS 50:4, pages 711-718.
Crossref

Masataka Hakamada, Akira Watazu, Naobumi Saito & Hajime Iwasaki. (2008) Tensile Properties of Forged Mg-Al-Zn-Ca Alloy. MATERIALS TRANSACTIONS 49:3, pages 554-558.
Crossref

Yasumasa Chino & Mamoru Mabuchi. (2008) Deformation Characteristics of Recycled AZ91 Mg Alloy Containing Oxide Contaminants. MATERIALS TRANSACTIONS 49:5, pages 1093-1100.
Crossref

Kyung Tae Park, Eui Gil Lee, Won Jong Nam & Yong Sin Lee. (2007) Coarse Second Phase Particle Size Distribution of UFG Al Alloys Processed by Severe Plastic Deformation: Effect on Cavitation during Superplastic Deformation. Materials Science Forum 539-543, pages 2859-2864.
Crossref

Horng-yu Wu, Jau-yuean Perng, Shyh-hung Shis, Chui-hung Chiu, Shyong Lee & Jian-yih Wang. (2006) Cavitation characteristics of a superplastic 5083 Al alloy during gas blow forming. Journal of Materials Science 41:22, pages 7446-7453.
Crossref

Amiya K. Mukherjee. 2006. Materials Science and Technology. Materials Science and Technology.

Kyung Tae Park, Chong Soo Lee, Yong Suk Kim & Dong Hyuk Shin. (2006) Superplastic Deformation of Ultrafine Grained Al Alloy Processed by ECAP and Post-Rolling. Materials Science Forum 503-504, pages 119-124.
Crossref

Z.P. Chen & P.F. Thomson. (2004) A study of post-form static and fatigue properties of superplastic 7475-SPF and 5083-SPF aluminium alloys. Journal of Materials Processing Technology 148:2, pages 204-219.
Crossref

C.Y. Tang, W. Shen, K.C. Chan & T.C. Lee. (2002) A damage model for fracture prediction of superplastic aluminium composite sheet. Journal of Materials Processing Technology 121:2-3, pages 301-307.
Crossref

M.A. Khaleel, H.M. Zbib & E.A. Nyberg. (2001) Constitutive modeling of deformation and damage in superplastic materials. International Journal of Plasticity 17:3, pages 277-296.
Crossref

Dong H. Shin & Kyung-Tae Park. (1999) Directional cavity stringer formation in a superplastic 7075 Al alloy. Materials Science and Engineering: A 268:1-2, pages 55-62.
Crossref

D. H. Bae & A. K. Ghosh. (2011) Cavitation in a Uniaxially deformed Superplastic Al-Mg Alloy. MRS Proceedings 601.
Crossref

Mohamed Zaki. (1998) Influence of hydrostatic pressure and multiaxial straining on cavitating superplastic materials. Metallurgical and Materials Transactions A 29:10, pages 2555-2561.
Crossref

Mohamed Zaki. (1996) Micronecking and fracture in cavitated superplastic materials. Metallurgical and Materials Transactions A 27:4, pages 1043-1046.
Crossref

Xing-Gang Jiang, Susan T. Yang, James C. Earthman & Farghalli A. Mohamed. (1996) Effect of Fe on ductility and cavitation in the superplastic Zn-22 Pct Al eutectoid. Metallurgical and Materials Transactions A 27:4, pages 863-872.
Crossref

H. Hofmann, G. Frommeyer & W. Herzog. (1995) Dislocation-creep-controlled superplasticity at high strain rates in the ultrafine-grained quasi-eutectoid Ti10Co4Al alloy. Materials Science and Engineering: A 203:1-2, pages 128-133.
Crossref

Xing-Gang Jiang, James C. Earthman & Farghalli A. Mohamed. (2004) Cavitation and cavity-induced fracture during superplastic deformation. Journal of Materials Science 29:21, pages 5499-5514.
Crossref

Jiang Xinggang, Cui Jianzhong & Ma Longxiang. (1993) The influence of the rolling direction on the mechanical behavior and cavity formation during superplastic deformation of 7075 A1 alloy. Acta Metallurgica et Materialia 41:9, pages 2721-2727.
Crossref

Z. X. Guo, K. Higashi & N. Ridley. (1990) An experimental investigation of the superplastic forming behavior of a commercial al-bronze. Metallurgical Transactions A 21:11, pages 2957-2966.
Crossref

Kyung-Tae Park & Farghalli A. Mohamed. (1990) Effect of Impurity Content on Cavitation in the Superplastic Zn-22 Pct Al Alloy. Metallurgical Transactions A 21:9, pages 2605-2608.
Crossref

Jiang Xinggang, Cui Jianzhong & Ma Longxiang. (2011) An Experimental Study of Cavity Nucleation During Superplastic Deformation. MRS Proceedings 196.
Crossref

Yasuhiro MAEHARA. (1989) Superplasticity of Ferrous Alloys and Steels. Tetsu-to-Hagane 75:8, pages 1247-1257.
Crossref

Dajun Zhou, Jianshe Liana & Yuwen Liu. 1989. Strength of Metals and Alloys (ICSMA 8). Strength of Metals and Alloys (ICSMA 8) 1159 1164 .

Jianshe LIAN, Bernard BAUDELET & Michel SUERY. 1987. Computational Methods for Predicting Material Processing Defects. Computational Methods for Predicting Material Processing Defects 213 220 .

V. K. Portnoi, V. S. Levchenko & Nguen Ngok Kuin'. (1986) The effect of alloying additions on the superplasticity of biphase brass. Metal Science and Heat Treatment 28:11, pages 794-801.
Crossref

Atul H. Chokshi. (1986) Cavitation in superplastic materials: Al—Li and Al—Zn—Mg alloys. Journal of Materials Science Letters 5:2, pages 144-146.
Crossref

L. R. Botvina & G. I. Barenblatt. (1985) Self-similarity of damage cumulation. Strength of Materials 17:12, pages 1653-1663.
Crossref

N. Ridley, D. W. Livesey & A. K. Mukherjee. (1984) Effect of strain, strain rate and temperature on cavity size distribution in a superplastic copper-base alloy. Journal of Materials Science 19:4, pages 1321-1332.
Crossref

Yasuhiro MAEHARA. (1984) Superplasticity of δ-ferrite/austenite Duplex Stainless Steels. Tetsu-to-Hagane 70:15, pages 2168-2175.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Failure of superplastic alloys

Articles from other publishers (37)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature