Citations (38)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
C.A.C. Imbert & H.J. McQueen. (2000) Flow curves up to peak strength of hot deformed D2 and W1 tool steels. Materials Science and Technology 16:5, pages 524-531.
Read now
Read now
V. M. Khlestov, E. V. Konopleva & H. J. Mcqueen. (1998) Effects of hot deformation on austenite transformation in 10w carbon Mo-Nb and C-Mn steels. Materials Science and Technology 14:8, pages 783-792.
Read now
Read now
V. M. Khlestov, E. V. Konopleva & H. J. McQueen. (1996) The Hot Working and Transformation to Ferrite of V–Mo, Nb and Nb–V Steels. Canadian Metallurgical Quarterly 35:2, pages 169-180.
Read now
Read now
K. P. Rao, E. B. Hawbolt, H. J. McQueen & D. Baragar. (1993) Constitutive Relationships for Hot Deformation of A Carbon Steel: A Comparison Study of Compression Tests and Torsion Tests. Canadian Metallurgical Quarterly 32:2, pages 165-175.
Read now
Read now
H.J. McQueen, O. Overdal, A. Cingara & H. Gjestland. (1992) Hot-working characteristics of C and V HSLA steels. Materials at High Temperatures 10:3, pages 207-218.
Read now
Read now
N. D. Ryan & H. J. McQueen. (1991) Comparison of static softening in 300 series stainless steels under iso- and anisothermal conditions. Materials Science and Technology 7:9, pages 818-826.
Read now
Read now
N. D. Ryan & H. J. McQueen. (1991) Bar Mill Torsional Simulation of 304 Stainless Steel. Canadian Metallurgical Quarterly 30:2, pages 113-124.
Read now
Read now
D. N. Crowther & B. Mintz. (1986) Influence of carbon on hot ductility of steels. Materials Science and Technology 2:7, pages 671-676.
Read now
Read now
H. J. Mcqueen, E. Evangelista, J. Bowles & G. Crawford. (1984) Hot deformation and dynamic recrystallization of Al-5Mg-0.8Mn alloy. Metal Science 18:8, pages 395-402.
Read now
Read now
N. D. Ryan, H. J. McQueen & J. J. Jonas. (1983) The Deformation Behavior of Types 304, 316, and 317 Austenitic Stainless Steels During Hot Torsion. Canadian Metallurgical Quarterly 22:3, pages 369-378.
Read now
Read now
H. J. McQueen. (1982) Review of Simulations of Multistage Hot-Forming of Steels. Canadian Metallurgical Quarterly 21:4, pages 445-460.
Read now
Read now
A. H. Ucisik, I. Weiss, H. J. McQueen & J. J. Jonas. (1980) Multistage Hot Deformation with Decreasing Temperature of Two Plain Carbon and Two HSLA Steels. Canadian Metallurgical Quarterly 19:4, pages 351-358.
Read now
Read now
Articles from other publishers (26)
C. Menapace, N. Sartori, M. Pellizzari & G. Straffelini. (2018) Hot Deformation Behavior of Four Steels: A Comparative Study. Journal of Engineering Materials and Technology 140:2.
Crossref
Crossref
Fulin Jiang, Hui Zhang, Jian Su & Yishan Sun. (2015) Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression. Materials Science and Engineering: A 636, pages 459-469.
Crossref
Crossref
C. W. Siyasiya & W. E. Stumpf. (2014) Constitutive Constants for Hot Working of Steels: The Critical Strain for Dynamic Recrystallisation in C-Mn Steels. Journal of Materials Engineering and Performance 24:1, pages 468-476.
Crossref
Crossref
Enrico Evangelista. 2011. Hot Deformation and Processing of Aluminum Alloys. Hot Deformation and Processing of Aluminum Alloys
21
51
.
H.J. McQueen, Yong Li, I. Rieiro, M. Carsi & O.A. Ruano. 2011. Supplemental Proceedings. Supplemental Proceedings
921
929
.
H.J. McQueen. (2004) Development of dynamic recrystallization theory. Materials Science and Engineering: A 387-389, pages 203-208.
Crossref
Crossref
H.J McQueen & N.D Ryan. (2002) Constitutive analysis in hot working. Materials Science and Engineering: A 322:1-2, pages 43-63.
Crossref
Crossref
C.A.C. Imbert & H.J. McQueen. (2001) Peak strength, strain hardening and dynamic restoration of A2 and M2 tool steels in hot deformation. Materials Science and Engineering: A 313:1-2, pages 88-103.
Crossref
Crossref
S.F. Wong, P.D. Hodgson, C.-J. Chong & P.F. Thomson. (1996) Physical modelling with application to metal working, especially to hot rolling. Journal of Materials Processing Technology 62:1-3, pages 260-274.
Crossref
Crossref
S.F. Medina & C.A. Hernandez. (1996) General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels. Acta Materialia 44:1, pages 137-148.
Crossref
Crossref
S.F. Wong, P.D. Hodgson & P.F. Thomson. (1995) Comparison of torsion and plane-strain compression for predicting mean yield strength in single-and multiple-pass flat rolling using lead to model hot steel. Journal of Materials Processing Technology 53:3-4, pages 601-616.
Crossref
Crossref
H.J. McQueen, S. Yue, N.D. Ryan & E. Fry. (1995) Hot working characteristics of steels in austenitic state. Journal of Materials Processing Technology 53:1-2, pages 293-310.
Crossref
Crossref
T. Matuszewski, H. J. McQueen & P. M. Machmeier. (1994) The workability of commercial and experimental 0.6 pct carbon low alloy steels in the temperature range of 650 °C to 870 °C. Metallurgical and Materials Transactions A 25:4, pages 827-837.
Crossref
Crossref
H.J. McQueen. (1993) Metal forming: Industrial, mechanical computational and microstructural. Journal of Materials Processing Technology 37:1-4, pages 3-36.
Crossref
Crossref
K.P. Rao & E.B. Hawbolt. (1992) Assessment of simple flow-stress relationships using literature data for a range of steels. Journal of Materials Processing Technology 29:1-3, pages 15-40.
Crossref
Crossref
T. Matuszewski, P. M. Machmeier & H. J. Mcqueen. (1991) Torsional hot workability in 0.47C-0.86Mn-0.5Cr-B steel from 650°c to 870°C. Metallurgical Transactions A 22:2, pages 469-477.
Crossref
Crossref
C. Devadas, D. Baragar, G. Ruddle, I. V. Samarasekera & E. B. Hawbolt. (1991) The thermal and metallurgical state of steel strip during hot rolling: Part II. Factors influencing rolling loads. Metallurgical Transactions A 22:2, pages 321-333.
Crossref
Crossref
Fengyin Wang & John Gustav Lenard. (1991) The constitutive behaviour of a Nb-V HSLA steel in the temperature range of 900 to 975 °C. Steel Research 62:2, pages 66-71.
Crossref
Crossref
G. Nadkarni, F. Wang & J.G. Lenard. 1988. Mechanical Behaviour of Materials V. Mechanical Behaviour of Materials V
301
308
.
N.D. Ryan & H.J. McQueen. (1986) Mean pass flow stresses and interpass softening in multistage processing of carbon-, HLSA-, tool- and γ-stainless steels. Journal of Mechanical Working Technology 12:3, pages 323-349.
Crossref
Crossref
Norman D. Ryan & Hugh J. McQueen. (1986) Effects of alloying upon the hot workability of carbon, microalloyed, tool, and austenitic stainless steels. Journal of Mechanical Working Technology 12:3, pages 279-296.
Crossref
Crossref
H. J. McQueen & J. J. Jonas. (1985) Role of the dynamic and static softening mechanisms in multistage hot working. Journal of Applied Metalworking 3:4, pages 410-420.
Crossref
Crossref
C. Imbert, N. D. Ryan & H. J. McQueen. (1984) Hot workability of three grades of tool steel. Metallurgical Transactions A 15:10, pages 1855-1864.
Crossref
Crossref
H. J. Mcqueen & J. J. Jonas. (1984) Recent advances in hot working: Fundamental dynamic softening mechanisms. Journal of Applied Metalworking 3:3, pages 233-241.
Crossref
Crossref
H.J. McQueen, J. Sankar & S. Fulop. 1980. Mechanical Behaviour of Materials. Mechanical Behaviour of Materials
675
684
.
H.J. McQueen & B. Baudelet. 1979. Strength of Metals and Alloys. Strength of Metals and Alloys
329
336
.