Nobl F. El Boraei, M.A.M. Ibrahim & R. Kamal. (2024) Facile synthesis of mesoporous ncCoW powder via electrodeposition; characterization and its efficient application on hydrogen generation and organic pollutants reduction. Surfaces and Interfaces 44, pages 103621.
Crossref
Anand Tiwari & Mayank Agarwal. (2022) Influence of SiC Reinforcement on AA6061 Alloy Composite Prepared by Gravity Die Casting. Journal of The Institution of Engineers (India): Series D 104:2, pages 643-649.
Crossref
Hudaverdi Bilgen, Omer Sahin, Neset Akar & Volkan Kilicli. (2023) Dry sliding wear behavior of AA7075 alloy produced by thixocasting. Materials Testing 0:0.
Crossref
Xiao-Kang Liang, Qiang Zhu, Min Luo & Da-Quan Li. (2018) Application of polarized light microscopy on microstructural characterization of semisolid slurry. Rare Metals 42:10, pages 3545-3552.
Crossref
Prosenjit Das. (2022) Microstructural Morphology and Mechanical Properties of Cooling Slope Rheocast A380 Al Alloy. Journal of Materials Engineering and Performance 32:18, pages 8120-8139.
Crossref
Mohammad Taghi Asadi Khanouki. (2023) Mechanical properties and microstructural evolution of rheocast A356 semi-solid slurry prepared by annular electromagnetic stirring. China Foundry 20:4, pages 315-328.
Crossref
Prosenjit Das. (2022) Primary Phase Morphology of Cooling Slope-Processed A356 Al Alloy and Its Effect on Rheological Properties. International Journal of Metalcasting 17:3, pages 2184-2206.
Crossref
Prosenjit Das. (2022) Microstructure Evolution During Rheoprocessing of A356 Al Alloy Using Cooling Slope. International Journal of Metalcasting 17:3, pages 1982-2001.
Crossref
Prosenjit Das. (2023) Effect of Melt Treatment on Microstructure Evolution and Coarsening Mechanism of A356 Al Alloy During Cooling Slope Rheoprocessing. Metallurgical Transactions B 54:3, pages 1383-1407.
Crossref
Chunfang Zhao, Guangquan Ma, Tong Liu, Maoliang Hu & Zesheng Ji. (2023) Effect of Near-Liquidus Squeeze Casting Pressure on Microstructure and Mechanical Property of AZ91D Alloy Differential Support. Materials 16:11, pages 4020.
Crossref
Prosenjit Das. (2023) Multiphase Flow Simulation and Experimental Validation of Cooling Slope Rheoprocessing of A380 Alloy. International Journal of Metalcasting.
Crossref
Prosenjit Das. (2023)
Multiphase flow model of semi solid solidification of novel Al-15Mg
2
Si-Si composite
. IOP Conference Series: Materials Science and Engineering 1281:1, pages 012042.
Crossref
Nagasivamuni Balasubramani, Jeffrey Venezuela, David StJohn, Gui Wang & Matthew Dargusch. (2023) A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments. Journal of Materials Science & Technology 144, pages 243-265.
Crossref
Sambeet K Sahu & Nirmal K Kund. (2022) Influence of slurry delivery rate and height from cooling slope outlet on solidification and structural behaviors of molded AZ91 magnesium alloy. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 237:7, pages 1719-1727.
Crossref
Keiji ShigaYuichiro MurakamiNaoki Omura. (2023) Effect of Electromagnetic Stirring on Shape of β-Al<sub>9</sub>Fe<sub>2</sub>Si<sub>2</sub> Intermetallic Compounds Formed During Solidification of Al–Si–Fe Alloys. MATERIALS TRANSACTIONS 64:3, pages 689-696.
Crossref
Junqing Yao, Suo Fan, Xinwang Liu, Xianfei Ding, Hong Huang, Weifeng Wu, Qiang Wang, Liang Wang & Yanqing Su. (2023) Pollution-free grain refinement of cast TiAl alloys by vacuum mechanical vibration solidification. Materials Science and Engineering: A 865, pages 144630.
Crossref
Saeed G. SHABESTARI & Ehsan GHANIABADI. (2023) Effect of Ca and rotation speed on microstructure and solidification parameters of AZ91 magnesium alloy produced by semi-solid casting through rotating container process. Transactions of Nonferrous Metals Society of China 33:2, pages 396-408.
Crossref
Prosenjit Das. (2022) Microstructure and Mechanical Properties of Cooling Slope Rheocast Al-7Si-0.3Mg Alloy and Development of a Rheo Pressure Die Cast Knuckle Housing. Metallurgical and Materials Transactions B 54:1, pages 395-424.
Crossref
P Zaffarani, Q Zhang, A E W Jarfors & G Timelli. (2023) Influence of stirring process during slurry formation on the casting defects and high-temperature fatigue of rheocast AlSi7Mg alloys. IOP Conference Series: Materials Science and Engineering 1274:1, pages 012024.
Crossref
Eugênio José Zoqui. 2023. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
X. H. Ma & N. A. Abd Razak. 2023. Technological Advancement in Mechanical and Automotive Engineering. Technological Advancement in Mechanical and Automotive Engineering
263
278
.
M. N. Mohammed, M. Z. Omar, Adnan Naji Jameel Al-Tamimi, Hakim S. Sultan, Luay Hashem Abbud, Salah Al-Zubaidi, Oday I. Abdullah & M. Abdulrazaq. (2022) Microstructural and Mechanical Characterization of Ledeburitic AISI D2 Cold-Work Tool Steel in Semisolid Zones via Direct Partial Remelting Process. Journal of Manufacturing and Materials Processing 7:1, pages 11.
Crossref
Prosenjit Das. (2022) Effect of process variables and melt treatment conditions during cooling slope semi solid slurry generation process of Al-7Si-0.3 Mg alloy. Materials Today Communications 33, pages 104944.
Crossref
Masoud Moradjoy-Hamedani, Abbas Zarei-Hanzaki & Seyed Mahmood Fatemi. (2018) Characterization of semisolid deformation behavior of a high Zr-containing WE magnesium alloy. Rare Metals 41:12, pages 4201-4208.
Crossref
Dashan Sui, Jianhua Wu & Qingyou Han. (2022) Towards the Ductility Limit of Large Thin-Walled A356 Alloy Castings. Metallurgical and Materials Transactions B 53:6, pages 3492-3504.
Crossref
Jia Liu, Jinchuan Jie, Xianlong Wang, Shumin Lou, Bo Peng & Tingju Li. (2022) Formation Mechanism of Three-Layer Solidified Structure in Commercial Purity Al During Solidification With a Forced Flow Field Induced by Pulsed Magnetic Field. Metallurgical and Materials Transactions A 53:12, pages 4362-4376.
Crossref
Chul Kyu Jin. (2022) Microstructures and Mechanical Properties of A356 Alloy and A6061 Alloy through Rheo, Upsetting, Thixo, Forming Process, and T6 Heat Treatment. Metals 12:12, pages 2051.
Crossref
Wenjuan Rong, Zhongde Shan, Baoyu Wang, Yongwei Wang & Jialin Wang. (2022) Microstructure Evolution of 2A12 Aluminum Alloy under Isothermal Heat Treatment Direct Writing Process. Materials 15:18, pages 6279.
Crossref
Nagasivamuni Balasubramani, Jeffrey Venezuela, Nan Yang, Gui Wang, David StJohn & Matthew Dargusch. (2022) An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals. Ultrasonics Sonochemistry 89, pages 106151.
Crossref
Mukkollu Sambasiva Rao & Amitesh Kumar. 2022. Casting Processes. Casting Processes.
Yuan-Sheng Rao, Hong Yan & Jun Wan. (2015) Rheological model of semisolid Mg2Si/AM60 composites prepared by ultrasonic vibration treatment. Rare Metals 41:8, pages 2783-2788.
Crossref
Shouxun Ji, Kai Wang & Xixi Dong. (2022) An Overview on the Process Development and the Formation of Non-Dendritic Microstructure in Semi-Solid Processing of Metallic Materials. Crystals 12:8, pages 1044.
Crossref
Zhan-yu Zhang, Xiao-feng Huang, Fan Yang, Sheng Zhang & Jiao-li Fu. (2022) Effect of La addition on semi-solid microstructure evolution of Mg−7Zn magnesium alloy. China Foundry.
Crossref
Eduardo Paixão Ritter & Felipe Tempel Stumpf. (2021) Finite-element simulation of semi-solid metal processing of tool steel encased in carbon steel. SIMULATION 98:7, pages 563-574.
Crossref
Dierk Raabe, Dirk Ponge, Peter J. Uggowitzer, Moritz Roscher, Mario Paolantonio, Chuanlai Liu, Helmut Antrekowitsch, Ernst Kozeschnik, David Seidmann, Baptiste Gault, Frédéric De Geuser, Alexis Deschamps, Christopher Hutchinson, Chunhui Liu, Zhiming Li, Philip Prangnell, Joseph Robson, Pratheek Shanthraj, Samad Vakili, Chad Sinclair, Laure Bourgeois & Stefan Pogatscher. (2022) Making sustainable aluminum by recycling scrap: The science of “dirty” alloys. Progress in Materials Science 128, pages 100947.
Crossref
Chaiyawat Peeratatsuwan, Phromphong Pandee, Ussadawut Patakham & Chaowalit Limmaneevichitr. (2022) Microstructure and rheological properties of a semisolid A356 alloy with erbium addition. Journal of Rare Earths 40:7, pages 1148-1155.
Crossref
Qingyou Han. (2022) The role of solutes in grain refinement of hypoeutectic magnesium and aluminum alloys. Journal of Magnesium and Alloys 10:7, pages 1846-1856.
Crossref
Yüsein Ali, Anıl Akdoğan & Ali Serdar Vanlı. (2022) Production of Aluminum Alloy Sealing Part by Semi Solid Die Casting Method. Defect and Diffusion Forum 417, pages 17-22.
Crossref
Mohammad Reza Akbarpour, Homayoun Mousa Mirabad, Amir Hemmati & Hyoung Seop Kim. (2022) Processing and microstructure of Ti-Cu binary alloys: A comprehensive review. Progress in Materials Science 127, pages 100933.
Crossref
Manish Dixit, Mayank Agarwal, Rajeev Srivastava & Devendra Pratap Singh. (2022) Study the effect of introducing 6061 Al alloy chip on the microstructure and properties of the 6061 wrought Al alloy prepared by gravity die-cast. Journal of The Institution of Engineers (India): Series D 103:1, pages 333-340.
Crossref
Mahdieh Jahanbakhshi, Salman Nourouzi, Reza Naseri & Kourosh Esfandiari. (2021) Investigation of Simultaneous Effects of Cooling Slope Casting and Mold Vibration on Mechanical and Microstructural Properties of A356 Aluminum Alloy. Metals and Materials International 28:6, pages 1508-1516.
Crossref
Serhat Acar & Kerem Altug Guler. (2022) A Thorough Study on Thixoformability of the Cooling Slope Cast 7075 Feedstocks: Step-by-Step Optimization of the Feedstock Production and Thixoforming Processes. International Journal of Metalcasting.
Crossref
An Guo, Xiaoying Qiu, Zhaohua Ke & Junwen Zhao. (2021) Effect of the Injection Velocity and the Electromagnetic Stirring on the Mechanical Properties of a Rheo-Diecast 357 Al Alloy. International Journal of Metalcasting 16:2, pages 663-673.
Crossref
Min Sik Lee & Chul Kyu Jin. (2022) Investigation of optimal solid solution heat treatment temperature and artificial aging time of Al7075 sheet. Journal of Mechanical Science and Technology 36:4, pages 1783-1788.
Crossref
Huan-Wei Pei, Shu-Guo Zhang, Hong-Min Guo, Wen He & Xu-Bo Liu. (2022) Forming and properties of 7075 aluminum alloy by rheological squeeze casting with transverse mobile injection feed. The International Journal of Advanced Manufacturing Technology 119:11-12, pages 7969-7981.
Crossref
Zong-xu Zhang, Ti-jun Chen, Kun Liu, Han Xue, Jia-chen Qi, Guang-li Bi & Ying Ma. (2022) Efficient fabrication of semisolid nondendritic Al alloy slurry with high quality. China Foundry 19:2, pages 117-130.
Crossref
Liping Ju, Yanlong Guan & Hongchao Luo. (2022) Study on the Time-dependent Rheological Properties of AlSi4Mg2 Alloy. Journal of Physics: Conference Series 2200:1, pages 012019.
Crossref
Kai Wang, Lirui Wang, Fuguo Li, Zhiming Zhang & Rong Luo. (2022) Anisotropic microstructure and thixo-compression deformation behavior of extruded 7075 aluminum alloy in semi-solid state. Materials Science and Engineering: A 833, pages 142514.
Crossref
Abdullah Alharbi, Ashfaq Khan, Iain Todd, Mohamed Ramadan & Kamran Mumtaz. (2022) Semisolid heat treatment processing window of Pb-40% Sn alloy for feedstock in the 3D printing thixo-forming process. Materials Today: Proceedings 51, pages 403-410.
Crossref
Sakendra Kumar, Satya Prakesh Tewari, Upendra Rajak, Abhishek Dasore & Tikendra Nath Verma. (2022) Properties evaluation of A356 and A319 Aluminum alloys under different casting conditions. Materials Today: Proceedings 49, pages 523-528.
Crossref
K. Yamamoto, M. Takahashi, Y. Kamikubo, Y. Sugiura, S. Iwasawa, T. Nakata & S. Kamado. (2021) Optimization of Cu content for the development of high-performance T5-treated thixo-cast Al–7Si–0.5Mg–Cu (wt.%) alloy. Journal of Materials Science & Technology 93, pages 178-190.
Crossref
S. Samat, M.Z. Omar, A.H. Baghdadi, I.F. Mohamed, A. Rajabi & A.M. Aziz. (2021) Microstructural evolution, dislocation density and tensile properties of Al–6.5Si–2.1Cu–0.35Mg alloy produced by different casting processes. Journal of Materials Science & Technology 95, pages 145-157.
Crossref
Nagasivamuni Balasubramani, Yanyi Xu, Yunhu Zhang, Qijie Zhai, Gui Wang, David StJohn & Matthew Dargusch. (2021) Investigating the Grain Refinement Mechanisms of Pulsed Electric Current, Ultrasonic and Melt Stirring Solidification of Pure Aluminium. JOM 73:12, pages 3873-3882.
Crossref
Jing Zou, Haitao Zhang, Xiaoyang Qiao, Zibin Wu, Lei Wang, Yinglong Li, Hiromi Nagaumi, Baomian Li & Jianzhong Cui. (2021) Research on grain refinement and its mechanism of pure aluminum under a novel permanent magnet stirring. Journal of Materials Research and Technology 15, pages 5894-5905.
Crossref
Chu Han, Ping Jiang, Shaoning Geng, Gaoyang Mi, Chunming Wang & Yuqiang Li. (2021) Nucleation mechanisms of equiaxed grains in the fusion zone of aluminum-lithium alloys by laser welding. Journal of Materials Research and Technology 14, pages 2219-2232.
Crossref
Jing Zou, Haitao Zhang, Zibin Wu, Jiahui Wang, Baomian Li, Jianzhong Cui, Hiromi Nagaumi & Yinglong Li. (2021) Effects of an intermittent permanent magnet stirring on the melt flow and grain refinement of Al–4.5Cu alloy. Journal of Materials Research and Technology 14, pages 1585-1600.
Crossref
Q. Han. (2021) Revisiting the Role of Solutes in Grain Refinement of Hypoeutectic Alloys. Metallurgical and Materials Transactions A 52:9, pages 4234-4245.
Crossref
Jian-kun Ren, Yun Chen, Yan-fei Cao, Bin Xu, Ming-yue Sun & Dian-zhong Li. (2021) A phase-field simulation of the solidification process under compression. Journal of Materials Research and Technology 13, pages 2210-2219.
Crossref
Zhiyong Liu, Weimin Mao, Tan Wan, Guotao Cui & Weipan Wang. (2020) Study on Semi-Solid A380 Aluminum Alloy Slurry Prepared by Water-Cooling Serpentine Channel and Its Rheo-Diecasting. Metals and Materials International 27:7, pages 2067-2077.
Crossref
Jian-kun Ren, Yun Chen, Yan-fei Cao, Bin Xu, Ming-yue Sun & Dian-zhong Li. (2021) A phase-field study of the solidification process coupled with deformation. Journal of Materials Science 56:21, pages 12455-12474.
Crossref
Ab. Abdelhakem, L. Hachani, K. Zaidat, I. Sari & Y. Fautrelle. (2021) Experimental Study of the Effect of Intermittent Electromagnetic Stirring on the Columnar-Equiaxed Transition in Sn–10 wt % Pb Alloy Solidification. Journal of Heat Transfer 143:6.
Crossref
Rishitosh Ranjan, B. Surekha & Prakash Ghose. (2021) Effect of Cooling Slope Process Parameters on Non-dendritic Feedstock Production: A Comprehensive Review. Journal of The Institution of Engineers (India): Series C 102:3, pages 821-842.
Crossref
Prosenjit Das & Pradip Dutta. (2021) Globularization of Primary Phase of Al–7Si–0.3Mg Alloy During Cooling Slope Processing and Isothermal Holding. Transactions of the Indian Institute of Metals 74:5, pages 1241-1251.
Crossref
Nur Azhani Abd Razak, Asnul Hadi Ahmad, Mohd Maarof Rashidi & Sumsun Naher. (2021) An investigation of semisolid Al7075 feedstock billet produced by a gas-assisted direct thermal method. The International Journal of Advanced Manufacturing Technology 114:3-4, pages 1233-1240.
Crossref
M S Denisov. (2021) Control of the formation of structural properties of hypereutectic aluminum alloys during injection molding with crystallization. Journal of Physics: Conference Series 1889:4, pages 042087.
Crossref
Nagasivamuni Balasubramani, Gui Wang, David H. StJohn & Matthew S. Dargusch. (2021) Current understanding of the origin of equiaxed grains in pure metals during ultrasonic solidification and a comparison of grain formation processes with low frequency vibration, pulsed magnetic and electric-current pulse techniques. Journal of Materials Science & Technology 65, pages 38-53.
Crossref
Rajkumar OhdarNiranjan Kumar SinghArchana Kumari & Randhir Kumar. (2021) Grey-Fuzzy Logic Based Approach in Multi-Response Optimization of Semi-Solid Forging of A356 Aluminium Alloy. Materials Science Forum 1016, pages 1875-1881.
Crossref
Igor Zimpel, Sergio Luiz Telles Bartex & Vinicius Karlinski de Barcellos. (2021) Effects of Stirring Time and Cooling Rate on the Rheocast Microstructure and Mechanical Properties of Magnesium Alloy MRI 230D. Materials Research 24:3.
Crossref
M. Muniyappan, N. Iyandurai & P. Duraisamy. (2021) Structural characterization and corrosion behaviour of AA 2024 reinforced with carbon nanotubes and silicon hybrid metal matrix nanocomposites. Materials Today: Proceedings 43, pages 1132-1140.
Crossref
Zhiyu Chang, Xingchen Wang, Yujuan Wu, Liming Peng & Wenjiang Ding. (2021) Review on criteria for assessing the processability of semisolid alloys. Materials Letters 282, pages 128835.
Crossref
Mir Irfan Ul Haq, Sanjay Mohan, Ankush Raina, Subramanian Jayalakshmi, Ramachandra Arvind Singh, Xizhang Chen, Sergey Konovalov & Manoj Gupta. 2021. Encyclopedia of Materials: Composites. Encyclopedia of Materials: Composites
402
414
.
Suo Fan, He-bao Wu & Jin-xiu Fang. (2021) Microstructure and mechanical properties of AZ91D magnesium alloy by expendable pattern shell casting with different mechanical vibration amplitudes and pouring temperatures. China Foundry 18:1, pages 1-8.
Crossref
Nguyen Anh Tuan, Dao Van Luu & Lai Dang Giang. 2021. Structural Health Monitoring and Engineering Structures. Structural Health Monitoring and Engineering Structures
49
61
.
Semegn Cheneke & D. Benny Karunakar. 2021. Optimization Methods in Engineering. Optimization Methods in Engineering
257
276
.
Jian LIU, Yuan-sheng CHENG, Sin Wing Norman CHAN & Daniel SUNG. (2020) Microstructure and mechanical properties of 7075 aluminum alloy during complex thixoextrusion. Transactions of Nonferrous Metals Society of China 30:12, pages 3173-3182.
Crossref
Shailesh Kumar Singh, K. Chattopadhyay & Pradip Dutta. (2020) Determination of Optimum Process Parameters and Residual Stress in Friction Welding of Thixocast A356 Aluminum Alloy. Metallurgical and Materials Transactions B 51:6, pages 3079-3088.
Crossref
Anders E. W. Jarfors, Qing Zhang & Stefan Jonsson. (2020) Feeding and Pore Formation in Semisolid Metal Casting. Metals 10:11, pages 1560.
Crossref
Serhat Acar & Kerem Altug Guler. (2020) Producing non-dendritic A356 and A380 feedstocks: Evaluation of the effects of cooling slope casting parameters. Materials Testing 62:11, pages 1147-1152.
Crossref
K. Yamamoto, M. Takahashi, Y. Kamikubo, Y. Sugiura, S. Iwasawa, T. Nakata & S. Kamado. (2020) Effect of Mg content on age-hardening response, tensile properties, and microstructures of a T5-treated thixo-cast hypoeutectic Al–Si alloy. Materials Science and Engineering: A 798, pages 140089.
Crossref
Kaio Niitsu Campo, Caio Chaussê de Freitas, Dalton Daniel de Lima & Rubens Caram. (2020) Observations on the compression properties of semisolid Ti–Cu alloys. Journal of Materials Research and Technology 9:6, pages 15802-15810.
Crossref
C. Berlanga-Labari, M. V. Biezma-Moraleda & Pedro J. Rivero. (2020) Corrosion of Cast Aluminum Alloys: A Review. Metals 10:10, pages 1384.
Crossref
Yujian Wang, Junjie Li, Lei Zhang, Zhijun Wang & Jincheng Wang. (2020) Phase-field study on the effect of initial particle aggregation on the transient coarsening behaviors. Modelling and Simulation in Materials Science and Engineering 28:7, pages 075007.
Crossref
Zhiyu Chang, Ning Su, Yujuan Wu, Qiao Lan, Liming Peng & Wenjiang Ding. (2020) Semisolid rheoforming of magnesium alloys: A review. Materials & Design 195, pages 108990.
Crossref
V F Korostelev & M S Denisov. (2020) Crystallization and rheological properties of alloys. IOP Conference Series: Materials Science and Engineering 919:2, pages 022019.
Crossref
H. Hanizam, M.S. Salleh, M.Z. Omar, A.B. Sulong & M.A.M. Arif. (2020) Effects of hybrid processing on microstructural and mechanical properties of thixoformed aluminum matrix composite. Journal of Alloys and Compounds 836, pages 155378.
Crossref
Pengyu Yan, Weimin Mao, Jing Fan, Bingkun Wang & Yabo Liu. (2020) Microstructural evolution, segregation and fracture behavior of A390 alloy prepared by combined Rheo-HPDC processing and Sr-modifier. Journal of Alloys and Compounds 835, pages 155297.
Crossref
K. Yamamoto, M. Takahashi, Y. Kamikubo, Y. Sugiura, S. Iwasawa, T. Nakata & S. Kamado. (2020) Influence of process conditions on microstructures and mechanical properties of T5-treated 357 aluminum alloys. Journal of Alloys and Compounds 834, pages 155133.
Crossref
Z. Szklarz & Ł. Rogal. (2020) Influence of Heat Treatment on the Microstructure and Corrosion Behavior of Thixo-cast Mg-Y-Nd-Zr. Journal of Materials Engineering and Performance 29:9, pages 6181-6195.
Crossref
Pu-Bo Li, Wan-Ting Tan, Mang-Mang Gao & Kuan-Guan Liu. (2020) Semisolid microstructural evolution of (CNTs + Sip)/AZ91D powder compacts prepared from powders by cold pressing and remelting. Rare Metals 39:6, pages 733-742.
Crossref
Pubo Li, Luyao Chen, Bo Cao & Keren Shi. (2020) Hierarchical microstructure architecture: A roadmap towards strengthening and toughening reduced graphene oxide/2024Al matrix composites synthesized by flake powder thixoforming. Journal of Alloys and Compounds 823, pages 153815.
Crossref
B Benjunior, A H Ahmad & M M Rashidi. (2020) Direct thermal method pouring temperature and holding time effect on aluminium alloy 6061 microstructure. IOP Conference Series: Materials Science and Engineering 788:1, pages 012017.
Crossref
Semegn Cheneke & D Benny Karunakar. (2019)
Microstructure characterization and evaluation of mechanical properties of stir rheocast AA2024/TiB
2
composite
. Journal of Composite Materials 54:7, pages 981-997.
Crossref
Pubo Li, Bo Cao, Wanting Tan & Mangmang Gao. (2020) Microstructure and synergistic strengthening mechanisms of carbon nanotubes and Mg2Si nanoparticles hybrid reinforced Mg matrix composites prepared by powder thixoforming. Journal of Alloys and Compounds 818, pages 152925.
Crossref
Gan Li, Hongxing Lu, Xiaogang Hu, Feng Lin, Xinwei Li & Qiang Zhu. (2020) Current Progress in Rheoforming of Wrought Aluminum Alloys: A Review. Metals 10:2, pages 238.
Crossref
Abhimanyu Chaudhari, Purnendu Nasker, Ankur Srivastava, Sudeep Paul & Ajit Kumar Chakrabarti. (2020) Microstructural and ageing response assessment of eutectic Al-Cu alloy due to isothermal heat treatment in semisolid state. Materials Research Express 7:1, pages 016518.
Crossref
S. Deepak kumar, Shailesh Dewangan, Sanjay Kumar Jha & A. Mandal. (2020) Optimization of dry sliding wear parameters of thixoformed A356-5TiB2 in-situ composites using RSM. Materials Today: Proceedings 33, pages 5061-5065.
Crossref
Mayank Agarwal, Jitesh Shukla, Ajit Kumar N. Shukla & Rajeev Srivastava. (2020) Microstructural evaluation of Al6061-SS316L cast composite reinforced by Ball-milled Al/Powder-SS316L/chip. Materials Today: Proceedings 26, pages 556-560.
Crossref
Su-qing ZHANG, Ti-jun CHEN & Ji-xue ZHOU. (2020) Effects of punch velocity on microstructure and tensile properties of thixoforged Mg2Sip/AM60B composite. Transactions of Nonferrous Metals Society of China 30:1, pages 110-122.
Crossref
Yang Song, Zhiming Zhang, Kai Wang, Hongxu Li & Zizong Zhu. (2020) Effects of Extrusion Processing on Microstructure of 7075Al Alloy in the Semi-solid State. Journal of Wuhan University of Technology-Mater. Sci. Ed. 34:6, pages 1433-1443.
Crossref
Vladislav Kamysbayev, Nicole M. James, Alexander S. Filatov, Vishwas Srivastava, Babak Anasori, Heinrich M. Jaeger, Yury Gogotsi & Dmitri V. Talapin. (2019) Colloidal Gelation in Liquid Metals Enables Functional Nanocomposites of 2D Metal Carbides (MXenes) and Lightweight Metals. ACS Nano 13:11, pages 12415-12424.
Crossref
S. Deepak Kumar, Shailesh Dewangan, S.K. Jha, S.K. Jha & A. Mandal. (2019)
Tribo-performance of Thixoformed A356-5TiB
2
in-situ
Composites
. IOP Conference Series: Materials Science and Engineering 653, pages 012045.
Crossref
S Rasyid, I Renreng, H Arsyad & M Syahid. (2019) Optimization of Pouring Temperatures and Stirrer Speed Parameters on a Semi-Solid Slurry of ADC12 Al Alloy Prepared by Mechanical Stirring. IOP Conference Series: Materials Science and Engineering 676:1, pages 012041.
Crossref
Arun Kumar, Uma Thanu Subramonia Pillai & Amirthalingam Srinivasan. (2019) Processing Techniques to Develop Metallic Materials with Superior Mechanical Properties. Transactions of the Indian Institute of Metals 72:10, pages 2877-2891.
Crossref
Mayank Agarwal & Rajeev Srivastava. (2019) Effect of thick slurry and stepped deformation on mechanical properties of AA6061 alloy. Emerging Materials Research 8:3, pages 394-403.
Crossref
Wenjie Li & Xiangjie Yang. (2019) Formation mechanism of spherulites in Al–Si7Mg alloy during solidification under flow and stirring. Journal of Alloys and Compounds 803, pages 891-900.
Crossref
Junzhen Gao, Xiaogang Hu, Qiang Zhu, Daquan Li & Yonglin Kang. (2019) Cooling Behavior and Microstructure of Semisolid A201 Aluminum Alloy Prepared by the SEED Process. Metals 9:9, pages 922.
Crossref
Tongmin Wang. (2019) Multi-dimensional characterization and controlling of microstructure evolution during solidification of metallic alloys. IOP Conference Series: Materials Science and Engineering 580:1, pages 012013.
Crossref
LiMei Kang & Chao Yang. (2019) A Review on High‐Strength Titanium Alloys: Microstructure, Strengthening, and Properties. Advanced Engineering Materials 21:8.
Crossref
Byung Keun Kang & Il Sohn. (2019) Effects of Si Content and Forging Pressure on the Microstructural and Mechanical Characteristics in Semi-solid Forging of Al-Si-Mg Alloys. Metallurgical and Materials Transactions A 50:7, pages 3213-3222.
Crossref
H. Hanizam, M.S. Salleh, M.Z. Omar & A.B. Sulong. (2019) Effects of mechanical stirring and short heat treatment on thixoformed of carbon nanotube aluminium alloy composite. Journal of Alloys and Compounds 788, pages 83-90.
Crossref
Miguel Jiménez, Joshua Vetter, Rainer Gadow, Francisco J. Carrión, José Sanes & María‐Dolores Bermúdez. (2019) Effect of Liquid Phase Impregnation Coatings on the Interfacial Bonding Strength of Carbon Fiber‐Reinforced Aluminum. Advanced Engineering Materials 21:6, pages 1801350.
Crossref
Yong Hu, Longzhi Zhao, Dejia Liu, Yanchuan Tang & Yongqiang Han. (2019) Investigation of semi-solid microstructures of an A356 alloy containing rare-earth Gd during isothermal heat treatment. International Journal of Materials Research 110:5, pages 422-427.
Crossref
Leandro Cássio de Paula & Eugenio Jose Zoqui. (2019) Microstructural refinement of 355 aluminium alloys by ultrasonic melt treatment (UST). SN Applied Sciences 1:5.
Crossref
Shahrooz Nafisi, Anthony Roccisano, Reza Ghomashchi & George Vander Voort. (2019) A Comparison between Anodizing and EBSD Techniques for Primary Particle Size Measurement. Metals 9:5, pages 488.
Crossref
Sérgio L.T. Bartex, Carlos A. dos Santos, Vinicius K. de Barcellos & Lírio Schaeffer. (2019) Effect of solid fraction on microstructures and mechanical properties of a Mg-Al-La-Ca alloy processed by rheocasting. Journal of Alloys and Compounds 776, pages 297-305.
Crossref
Amin Jabbari & Karen Abrinia. (2018) Preparing a Solid Filament for Use in Additive Manufacturing of Metals. JOM 71:3, pages 1088-1094.
Crossref
Hesam Pourfallah & Mohammad Shahmiri. (2018) Effect of SIMA Process on Microstructure and Wear Behavior of Al-Mg2Si-3% Ni Composite. Metallography, Microstructure, and Analysis 8:1, pages 109-117.
Crossref
E. I. Marukovich, A. M. Branovitsky & Yu. A. Lebedinsky. (2019) Modelling of the microstructure formation during solidification of binary alloy Al–Si under stirring. Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 63:4, pages 391-398.
Crossref
Plato Kapranos. (2019) Thixoforming of Aluminum A201- Expectations and Fulfilment. Solid State Phenomena 285, pages 476-488.
Crossref
Gerardo Sanjuan-Sanjuan & Ángel Enrique Chavez-Castellanos. (2019) Viscoelastic Properties of Thixotropic Semisolid Alloy Relating the Microstructure. Solid State Phenomena 285, pages 380-384.
Crossref
Sudip Simlandi, Nilkanta Barman & Himadri Chattopadhyay. (2019) A Study on Bar Drawing Process of A356 Alloy in Semisolid State. Solid State Phenomena 285, pages 318-325.
Crossref
Jun Zhen Gao, Qiang Zhu, Da Quan Li, Xiao Gang Hu, Min Luo & Yong Lin Kang. (2019) Slurry Preparation and Hot Tearing Susceptibility of A201 Aluminum Alloy in Rheological Die Casting. Solid State Phenomena 285, pages 311-317.
Crossref
Nora Nafari, Farnoush Yekani & Hossein Aashuri. (2019) Microstructural Investigation of Semisolid Aluminum A356 Alloy Prepared by the Combination of Electromagnetic Stirring and Gas Induction. Solid State Phenomena 285, pages 290-295.
Crossref
Farshid Marani & Behzad Niroumand. (2019) Semisolid Casting of Short Freezing Range Alloys. Solid State Phenomena 285, pages 247-252.
Crossref
Hamid Tavakkoli, Behzad Niroumand & Ahmad Rezaeian. (2019) SIMA Processing of Cu34wt.%Zn2wt.%Pb Brass Alloy. Solid State Phenomena 285, pages 176-182.
Crossref
Annalisa Pola. (2019) Correlation between Microstructure and Properties of Semi-Solid Products. Solid State Phenomena 285, pages 12-23.
Crossref
Saziana Samat, Mohd Zaidi Omar & Intan Fadhlina Mohamed. (2019) High-Frequency Induction Heating of Al-Si-Cu-Mg aluminum alloy in Thixoforming. Materials Research 22:5.
Crossref
Elena Mihalcea, Héctor Vergara Hernández, Luis Olmos & Omar Jimenez. (2019) Semi-solid Sintering of Ti6Al4V/CoCrMo Composites for Biomedical Applications. Materials Research 22:2.
Crossref
N.D.Malleswararao.K & I.N.Niranjan Kumar. (2019) Investigation of tribological behaviour of DLC coating on hyper-eutectic Al-Si alloys, a review. Materials Today: Proceedings 18, pages 2581-2589.
Crossref
S. Deepak kumar, S.K. Jha, D. Karthik & A. Mandal. (2019) Fatigue Analysis of A356-TiB2 (5wt%) in-situ Nano composites. Materials Today: Proceedings 18, pages 774-779.
Crossref
Amin Kolahdooz & Sasan AminianDehkordiDehkordi. (2019) Effects of important parameters in the production of Al-A356 alloy by semi-solid forming process. Journal of Materials Research and Technology 8:1, pages 189-198.
Crossref
S. Deepak Kumar, Joyjeet Ghose & A. Mandal. 2019. Sustainable Engineering Products and Manufacturing Technologies. Sustainable Engineering Products and Manufacturing Technologies
25
43
.
Wen-zhi Zhu, Wei-min Mao, Qing-song Wei, Chen Hui & Yu-sheng Shi. (2019) Preparation of Al-Zn-Mg-Cu alloy semisolid slurry through a water-cooled serpentine pouring channel. China Foundry 16:1, pages 31-39.
Crossref
Sahini Deepak Kumar, Ananya Chatttee, Sanjay Kumar Jha, Niranjan Kumar Singh & Animesh Mandal. 2019. Advances in Industrial and Production Engineering. Advances in Industrial and Production Engineering
77
84
.
S. Deepak Kumar, D. Karthik, S. K. Parida & S. K. Jha. 2019. Innovations in Soft Computing and Information Technology. Innovations in Soft Computing and Information Technology
279
286
.
Pravin S. Misal & N. S. Chandrashekhar. 2019. Proceedings of International Conference on Intelligent Manufacturing and Automation. Proceedings of International Conference on Intelligent Manufacturing and Automation
171
180
.
Mathias Liewald & Kim Rouven Riedmüller. 2019. CIRP Encyclopedia of Production Engineering. CIRP Encyclopedia of Production Engineering
1720
1724
.
Chandan Choudhary, K. L. Sahoo & D. Mandal. 2019. Light Metals 2019. Light Metals 2019
241
249
.
Behzad Binesh, Mehrdad Aghaie-Khafri, Mehdi Shaban & Ali Fardi-Ilkhchy. (2018) Microstructural evolution and mechanical properties of thixoformed 7075 aluminum alloy prepared by conventional and new modified SIMA processes. International Journal of Materials Research 109:12, pages 1122-1135.
Crossref
Jagan Nath. 2018. Aluminum Castings Engineering Guide. Aluminum Castings Engineering Guide
29
90
.
Frank Czerwinski. (2018) Thermomechanical Processing of Metal Feedstock for Semisolid Forming: A Review. Metallurgical and Materials Transactions B 49:6, pages 3220-3257.
Crossref